aboutsummaryrefslogtreecommitdiff
path: root/kernel/trace
AgeCommit message (Collapse)Author
2008-11-03tracing, ring-buffer: add paranoid checks for loopsSteven Rostedt
While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03ftrace: use kretprobe trampoline name to test in outputSteven Rostedt
Impact: ia64+tracing build fix When a function is kprobed, the return address is set to the kprobe_trampoline, or something similar. This caused the output of the trace to look confusing when the parent seemed to be this "kprobe_trampoline" function. To fix this, Abhishek Sagar added a test of the instruction pointer of the parent to see if it matched the kprobe_trampoline. If it did, the output would print a "[unknown/kretprobe'd]" instead. Unfortunately, not all archs do this the same way, and the trampoline function may not be exported, which causes failures in builds. This patch will compare the name instead of the pointer to see if it matches. This prevents us from depending on a function from being exported, and should work on all archs. The worst that can happen is that an arch might use a different name and then we go back to the confusing output. At least the arch will still build. Reported-by: Abhishek Sagar <sagar.abhishek@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Abhishek Sagar <sagar.abhishek@gmail.com> Acked-by: Abhishek Sagar <sagar.abhishek@gmail.com>
2008-11-03tracing, alpha: undefined reference to `save_stack_trace'Al Viro
Impact: build fix on !stacktrace architectures only select STACKTRACE on architectures that have STACKTRACE_SUPPORT ... since we also need to ifdef out the guts of ftrace_trace_stack(). We also want to disallow setting TRACE_ITER_STACKTRACE in trace_flags on such configs, but that can wait. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31ftrace: handle archs that do not support irqs_disabled_flagsSteven Rostedt
Impact: build fix on non-lockdep architectures Some architectures do not support a way to read the irq flags that is set from "local_irq_save(flags)" to determine if interrupts were disabled or enabled. Ftrace uses this information to display to the user if the trace occurred with interrupts enabled or disabled. Besides the fact that those archs that do not support this will fail to compile, unless they fix it, we do not want to have the trace simply say interrupts were not disabled or they were enabled, without knowing the real answer. This patch adds a 'X' in the output to let the user know that the architecture they are running on does not support a way for the tracer to determine if interrupts were enabled or disabled. It also lets those same archs compile with tracing enabled. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-29ftrace: fix trace_nop config selectSteven Rostedt
Impact: build fix on non-function-tracing architectures The trace_nop is the tracer that is defined when no tracer is set in the ftrace infrastructure. The trace_nop was mistakenly selected by HAVE_FTRACE due to the confusion between ftrace infrastructure and the ftrace function tracer (which has been solved by renaming the function tracer). This patch changes the select to the approriate TRACING. This patch should fix compile errors on architectures that do not define the FUNCTION_TRACER. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28ftrace: perform an initialization for ftrace to enable itFrederic Weisbecker
Impact: corrects a bug which made the non-dyn function tracer not functional With latest git, the non-dynamic function tracer didn't get any trace. The problem was the fact that ftrace_enabled wasn't initialized to 1 because ftrace hasn't any init function when DYNAMIC_FTRACE is disabled. So when a tracer tries to register an ftrace_ops struct, __register_ftrace_function failed to set the hook. This patch corrects it by setting an init function to initialize ftrace during the boot. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28ftrace: fix current_tracer error returnSteven Rostedt
The commit (in linux-tip) c2931e05ec5965597cbfb79ad332d4a29aeceb23 ( ftrace: return an error when setting a nonexistent tracer ) added useful code that would error when a bad tracer was written into the current_tracer file. But this had a bug if the amount written was more than the amount read by that code. The first iteration would set the tracer correctly, but since it did not consume the rest of what was written (usually whitespace), the userspace utility would continue to write what was not consumed. This second iteration would fail to find a tracer and return -EINVAL. Funny thing is that the tracer would have already been set. This patch just consumes all the data that is written to the file. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28tracing: fix a build error on alphaFrederic Weisbecker
Impact: build fix on Alpha When tracing is enabled, some arch have included <linux/irqflags.h> on their <asm/system.h> but others like alpha or m68k don't. Build error on alpha: kernel/trace/trace.c: In function 'tracing_cpumask_write': kernel/trace/trace.c:2145: error: implicit declaration of function 'raw_local_irq_disable' kernel/trace/trace.c:2162: error: implicit declaration of function 'raw_local_irq_enable' Tested on Alpha through a cross-compiler (should correct a similar issue on m68k). Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-27tracing/ftrace: make boot tracer select the sched_switch tracerFrederic Weisbecker
Impact: build fix If the boot tracer is selected but not the sched_switch, there will be a build failure: kernel/built-in.o: In function `boot_trace_init': trace_boot.c:(.text+0x5ee38): undefined reference to `sched_switch_trace' kernel/built-in.o: In function `disable_boot_trace': (.text+0x5eee1): undefined reference to `tracing_stop_cmdline_record' kernel/built-in.o: In function `enable_boot_trace': (.text+0x5ef11): undefined reference to `tracing_start_cmdline_record' This patch fixes it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-27trace: fix printk warning for u64Stephen Rothwell
A powerpc ppc64_defconfig build produces these warnings: kernel/trace/ring_buffer.c: In function 'rb_add_time_stamp': kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 2 has type 'u64' kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64' kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'u64' Just cast the u64s to unsigned long long like we do everywhere else. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-24ftrace: warning in kernel/trace/ftrace.cIngo Molnar
this warning: kernel/trace/ftrace.c:189: warning: ‘frozen_record_count’ defined but not used triggers because frozen_record_count is only used in the KCONFIG_MARKERS case. Move the variable it there. Alas, this frozen-record facility seems to have little use. The frozen_record_count variable is not used by anything, nor the flags. So this section might need a bit of dead-code-removal care as well. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23ftrace: fix build failureIngo Molnar
fix: kernel/trace/ftrace.c: In function 'ftrace_release': kernel/trace/ftrace.c:271: error: implicit declaration of function 'ftrace_release_hash' release_hash is not needed without dftraced. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23ftrace: remove ftrace hashSteven Rostedt
The ftrace hash was used by the ftrace_daemon code. The record ip function would place the calling address (ip) into the hash. The daemon would later read the hash and modify that code. The hash complicates the code. This patch removes it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23ftrace: remove mcount setSteven Rostedt
The arch dependent function ftrace_mcount_set was only used by the daemon start up code. This patch removes it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23ftrace: remove daemonSteven Rostedt
The ftrace daemon is complex and error prone. This patch strips it out of the code. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23ftrace: add ftrace warn on to disable ftraceSteven Rostedt
Add ftrace warn on to disable ftrace as well as report a warning. [ Thanks to Andrew Morton for suggesting using the WARN_ON return value ] Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23ftrace: only have ftrace_kill atomicSteven Rostedt
When an anomaly is detected, we need a way to completely disable ftrace. Right now we have two functions: ftrace_kill and ftrace_kill_atomic. The ftrace_kill tries to do it in a "nice" way by converting everything back to a nop. The "nice" way is dangerous itself, so this patch removes it and only has the "atomic" version, which is all that is needed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23ftrace: return error on failed modified text.Steven Rostedt
Have the ftrace_modify_code return error values: -EFAULT on error of reading the address -EINVAL if what is read does not match what it expected -EPERM if the write fails to update after a successful match. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22ring-buffer: fix free pageSteven Rostedt
The pages of a buffer was originally pointing to the page struct, it now points to the page address. The freeing of the page still uses the page frame free "__free_page" instead of the correct free_page to the address. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22tracing: create tracers menuPeter Zijlstra
We seem to have plenty tracers, lets create a menu and not clutter the already cluttered debug menu more. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Frédéric Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20ftrace: stack tracer only record when on stackSteven Rostedt
The stack trace API does not record if the stack is not on the current task's stack. That is, if the stack is the interrupt stack or NMI stack, the output does not show. Also, the size of those stacks are not consistent with the size of the thread stack, this makes the calculation of the stack size usually bogus. This all confuses the stack tracer. I unfortunately do not have time to fix all these problems, but this patch does record the worst stack when the stack pointer is on the tasks stack (instead of bogus numbers). The patch simply returns if the stack pointer is not on the task's stack. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20ftrace: rename the ftrace tracer to functionSteven Rostedt
To avoid further confusion between the ftrace infrastructure and the function tracer. This patch renames the "ftrace" function tracer to "function". Now in available_tracers, instead of "ftrace" there will be "function". This makes more sense, since people will not know exactly what the "ftrace" tracer does. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20ftrace: rename FTRACE to FUNCTION_TRACERSteven Rostedt
Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20ftrace: fix dependsSteven Rostedt
A lot of tracers have HAVE_FTRACE as a dependent config where it really should not. The HAVE_FTRACE is a misnomer (soon to be fixed) and describes if the architecture has the function tracer (mcount) implemented. The ftrace infrastructure is implemented in all archs. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20ftrace: release functions from hashSteven Rostedt
The x86 architecture uses a static recording of mcount caller locations and is not affected by this patch. For architectures still using the dynamic ftrace daemon, this patch is critical. It removes the race between the recording of a function that calls mcount, the unloading of a module, and the ftrace daemon updating the call sites. This patch adds the releasing of the hash functions that the daemon uses to update the mcount call sites. When a module is unloaded, not only are the replaced call site table update, but now so is the hash recorded functions that the ftrace daemon will use. Again, architectures that implement MCOUNT_RECORD are not affected by this (which currently only x86 has). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/fastboot: improve help textIngo Molnar
Improve the help text of the boot tracer. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/stacktrace: improve help textIngo Molnar
Improve the help text that is displayed for CONFIG_STACK_TRACER. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14trace: add build-time check to avoid overrunning hex bufferHarvey Harrison
Remove the runtime BUG_ON and change to a compile-time check in the macro that calls the hex format routine [Noticed by Joe Perches] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: fix hex output mode of ftraceHarvey Harrison
Fix the output of ftrace in hex mode as the hi/lo nibbles are output in reverse order. Without this patch, the output of ftrace is: raw mode : 6474 0 141531612444 0 140 + 6402 120 S hex mode : 000091a4 00000000 000000023f1f50c1 00000000 c8 000000b2 00009120 87 ffff00c8 00000035 There is an inversion on ouput hex(6474) is 194a [based on a patch by Philippe Reynes <tremyfr@yahoo.fr>] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/fastboot: fix printk format typo in boot tracerArjan van de Ven
When printing nanoseconds, the right printk format string is %09 not %06... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Frédéric Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: return an error when setting a nonexistent tracerFrederic Weisbecker
When one try to set a nonexistent tracer, no error is returned as if the name of the tracer was correct. We should return -EINVAL. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make some tracers reentrantSteven Rostedt
Now that the ring buffer is reentrant, some of the ftrace tracers (sched_swich, debugging traces) can also be reentrant. Note: Never make the function tracer reentrant, that can cause recursion problems all over the kernel. The function tracer must disable reentrancy. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring-buffer: make reentrantSteven Rostedt
This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring-buffer: move page indexes into page headersSteven Rostedt
Remove the global head and tail indexes and move them into the page header. Each page will now keep track of where the last write and read was made. We also rename the head and tail to read and write for better clarification. This patch is needed for future enhancements to move the ring buffer to a lockless solution. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/fastboot: only trace non-module initcallsFrederic Weisbecker
At this time, only built-in initcalls interest us. We can't really produce a relevant graph if we include the modules initcall too. I had good results after this patch (see svg in attachment). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: move pc counter in irqtraceSteven Rostedt
The assigning of the pc counter is in the wrong spot in the check_critical_timing function. The pc variable is used in the out jump. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring_buffer: map to cpu not pageSteven Rostedt
My original patch had a compile bug when NUMA was configured. I referenced cpu when it should have been cpu_buffer->cpu. Ingo quickly fixed this bug by replacing cpu with 'i' because that was the loop counter. Unfortunately, the 'i' was the counter of pages, not CPUs. This caused a crash when the number of pages allocated for the buffers exceeded the number of pages, which would usually be the case. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/fastboot: get the initcall name before it disappearsFrederic Weisbecker
After some initcall traces, some initcall names may be inconsistent. That's because these functions will disappear from the .init section and also their name from the symbols table. So we have to copy the name of the function in a buffer large enough during the trace appending. It is not costly for the ring_buffer because the number of initcall entries is commonly not really large. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/fastboot: change the printing of boot tracer according to bootgraph.plFrederic Weisbecker
Change the boot tracer printing to make it parsable for the scripts/bootgraph.pl script. We have now to output two lines for each initcall, according to the printk in do_one_initcall() in init/main.c We need now the call's time and the return's time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring-buffer: fix build errorIngo Molnar
fix: kernel/trace/ring_buffer.c: In function ‘rb_allocate_pages’: kernel/trace/ring_buffer.c:235: error: ‘cpu’ undeclared (first use in this function) kernel/trace/ring_buffer.c:235: error: (Each undeclared identifier is reported only once kernel/trace/ring_buffer.c:235: error: for each function it appears in.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: preempt disable over interrupt disableSteven Rostedt
With the new ring buffer infrastructure in ftrace, I'm trying to make ftrace a little more light weight. This patch converts a lot of the local_irq_save/restore into preempt_disable/enable. The original preempt count in a lot of cases has to be sent in as a parameter so that it can be recorded correctly. Some places were recording it incorrectly before anyway. This is also laying the ground work to make ftrace a little bit more reentrant, and remove all locking. The function tracers must still protect from reentrancy. Note: All the function tracers must be careful when using preempt_disable. It must do the following: resched = need_resched(); preempt_disable_notrace(); [...] if (resched) preempt_enable_no_resched_notrace(); else preempt_enable_notrace(); The reason is that if this function traces schedule() itself, the preempt_enable_notrace() will cause a schedule, which will lead us into a recursive failure. If we needed to reschedule before calling preempt_disable, we should have already scheduled. Since we did not, this is most likely that we should not and are probably inside a schedule function. If resched was not set, we still need to catch the need resched flag being set when preemption was off and the if case at the end will catch that for us. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring_buffer: allocate buffer page pointerSteven Rostedt
The current method of overlaying the page frame as the buffer page pointer can be very dangerous and limits our ability to do other things with a page from the buffer, like send it off to disk. This patch allocates the buffer_page instead of overlaying the page's page frame. The use of the buffer_page has hardly changed due to this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: type cast filter+verifierSteven Rostedt
The mmiotrace map had a bug that would typecast the entry from the trace to the wrong type. That is a known danger of C typecasts, there's absolutely zero checking done on them. Help that problem a bit by using a GCC extension to implement a type filter that restricts the types that a trace record can be cast into, and by adding a dynamic check (in debug mode) to verify the type of the entry. This patch adds a macro to assign all entries of ftrace using the type of the variable and checking the entry id. The typecasts are now done in the macro for only those types that it knows about, which should be all the types that are allowed to be read from the tracer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: adapt mmiotrace to the new type of print_line, fixFrederic Weisbecker
Correct the value's type of trace_empty function Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring_buffer: implement new lockingSteven Rostedt
The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring_buffer: remove raw from local_irq_saveSteven Rostedt
The raw_local_irq_save causes issues with lockdep. We don't need it so replace them with local_irq_save. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: adapt the boot tracer to the new print_line typeFrederic Weisbecker
This patch adapts the boot tracer to the new type of the print_line callback. It still relays entries it doesn't support to default output functions. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: adapt mmiotrace to the new type of print_lineFrederic Weisbecker
Adapt mmiotrace to the new print_line type. By default, it ignores (and consumes) types it doesn't support. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: fix pipe breakingPekka Paalanen
This patch fixes a bug which break the pipe when the seq is empty. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: change the type of the print_line callbackFrederic Weisbecker
We need a kind of disambiguation when a print_line callback returns 0. _There is not enough space to print all the entry. Please flush the seq and retry. _I can't handle this type of entry This patch changes the type of this callback for better information. Also some changes have been made in this V2. _ Only relay to default functions after the print_line callback fails. _ This patch doesn't fix the issue with the broken pipe (see patch 2/4 for that) Some things are still in discussion: _ Find better names for the enum print_line_t values _ Change the type of print_trace_line into boolean. Patches to change that can be sent later. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>