aboutsummaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2009-01-31Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: generic-ipi: use per cpu data for single cpu ipi calls cpumask: convert lib/smp_processor_id to new cpumask ops signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal()
2009-01-31Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: export __set_irq_handler() and handle_level_irq()
2009-01-31Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: prevent negative expiry value after clock_was_set() hrtimers: allow the hot-unplugging of all cpus hrtimers: increase clock min delta threshold while interrupt hanging
2009-01-31Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ds, bts: cleanup/fix DS configuration ring-buffer: reset timestamps when ring buffer is reset trace: set max latency variable to zero on default trace: stop all recording to ring buffer on ftrace_dump trace: print ftrace_dump at KERN_EMERG log level ring_buffer: reset write when reserve buffer fail tracing/function-graph-tracer: fix a regression while suspend to disk ring-buffer: fix alignment problem
2009-01-30hrtimer: prevent negative expiry value after clock_was_set()Thomas Gleixner
Impact: prevent false positive WARN_ON() in clockevents_program_event() clock_was_set() changes the base->offset of CLOCK_REALTIME and enforces the reprogramming of the clockevent device to expire timers which are based on CLOCK_REALTIME. If the clock change is large enough then the subtraction of the timer expiry value and base->offset can become negative which triggers the warning in clockevents_program_event(). Check the subtraction result and set a negative value to 0. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-01-30hrtimers: allow the hot-unplugging of all cpusSebastien Dugue
Impact: fix CPU hotplug hang on Power6 testbox On architectures that support offlining all cpus (at least powerpc/pseries), hot-unpluging the tick_do_timer_cpu can result in a system hang. This comes from the fact that if the cpu going down happens to be the cpu doing the tick, then as the tick_do_timer_cpu handover happens after the cpu is dead (via the CPU_DEAD notification), we're left without ticks, jiffies are frozen and any task relying on timers (msleep, ...) is stuck. That's particularly the case for the cpu looping in __cpu_die() waiting for the dying cpu to be dead. This patch addresses this by having the tick_do_timer_cpu handover happen earlier during the CPU_DYING notification. For this, a new clockevent notification type is introduced (CLOCK_EVT_NOTIFY_CPU_DYING) which is triggered in hrtimer_cpu_notify(). Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30hrtimers: increase clock min delta threshold while interrupt hangingFrederic Weisbecker
Impact: avoid timer IRQ hanging slow systems While using the function graph tracer on a virtualized system, the hrtimer_interrupt can hang the system on an infinite loop. This can be caused in several situations: - the hardware is very slow and HZ is set too high - something intrusive is slowing the system down (tracing under emulation) ... and the next clock events to program are always before the current time. This patch implements a reasonable compromise: if such a situation is detected, we share the CPUs time in 1/4 to process the hrtimer interrupts. This is enough to let the system running without serious starvation. It has been successfully tested under VirtualBox with 1000 HZ and 100 HZ with function graph tracer launched. On both cases, the clock events were increased until about 25 ms periodic ticks, which means 40 HZ. So we change a hard to debug hang into a warning message and a system that still manages to limp along. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30generic-ipi: use per cpu data for single cpu ipi callsSteven Rostedt
The smp_call_function can be passed a wait parameter telling it to wait for all the functions running on other CPUs to complete before returning, or to return without waiting. Unfortunately, this is currently just a suggestion and not manditory. That is, the smp_call_function can decide not to return and wait instead. The reason for this is because it uses kmalloc to allocate storage to send to the called CPU and that CPU will free it when it is done. But if we fail to allocate the storage, the stack is used instead. This means we must wait for the called CPU to finish before continuing. Unfortunatly, some callers do no abide by this hint and act as if the non-wait option is mandatory. The MTRR code for instance will deadlock if the smp_call_function is set to wait. This is because the smp_call_function will wait for the other CPUs to finish their called functions, but those functions are waiting on the caller to continue. This patch changes the generic smp_call_function code to use per cpu variables if the allocation of the data fails for a single CPU call. The smp_call_function_many will fall back to the smp_call_function_single if it fails its alloc. The smp_call_function_single is modified to not force the wait state. Since we now are using a single data per cpu we must synchronize the callers to prevent a second caller modifying the data before the first called IPI functions complete. To do so, I added a flag to the call_single_data called CSD_FLAG_LOCK. When the single CPU is called (which can be called when a many call fails an alloc), we set the LOCK bit on this per cpu data. When the caller finishes it clears the LOCK bit. The caller must wait till the LOCK bit is cleared before setting it. When it is cleared, there is no IPI function using it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29cgroup: fix root_count when mount fails due to busy subsystemPaul Menage
root_count was being incremented in cgroup_get_sb() after all error checking was complete, but decremented in cgroup_kill_sb(), which can be called on a superblock that we gave up on due to an error. This patch changes cgroup_kill_sb() to only decrement root_count if the root was previously linked into the list of roots. Signed-off-by: Paul Menage <menage@google.com> Tested-by: Serge Hallyn <serue@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29cgroups: add cpu_relax() calls in css_tryget() and cgroup_clear_css_refs()Paul Menage
css_tryget() and cgroup_clear_css_refs() contain polling loops; these loops should have cpu_relax calls in them to reduce cross-cache traffic. Signed-off-by: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29cgroups: fix lock inconsistency in cgroup_clone()Li Zefan
I fixed a bug in cgroup_clone() in Linus' tree in commit 7b574b7 ("cgroups: fix a race between cgroup_clone and umount") without noticing there was a cleanup patch in -mm tree that should be rebased (now commit 104cbd5, "cgroups: use task_lock() for access tsk->cgroups safe in cgroup_clone()"), thus resulted in lock inconsistency. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29cgroups: use hierarchy mutex in creation failure pathKAMEZAWA Hiroyuki
Now, cgrp->sibling is handled under hierarchy mutex. error route should do so, too. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Acked-by Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-27cpumask fallout: Initialize irq_default_affinity earlierDavid Daney
Move the initialization of irq_default_affinity to early_irq_init as core_initcall is too late. irq_default_affinity can be used in init_IRQ and potentially timer and SMP init as well. All of these happen before core_initcall. Moving the initialization to early_irq_init ensures that it is initialized before it is used. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Mike Travis <travis@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-27Make irq_*_affinity depend on CONFIG_GENERIC_HARDIRQS too.David Daney
In interrupt.h these functions are declared only if CONFIG_GENERIC_HARDIRQS is set. We should define them under identical conditions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-27Merge branch 'hibern_fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'hibern_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: SATA PIIX: Blacklist system that spins off disks during ACPI power off SATA Sil: Blacklist system that spins off disks during ACPI power off SATA AHCI: Blacklist system that spins off disks during ACPI power off SATA: Blacklisting of systems that spin off disks during ACPI power off DMI: Introduce dmi_first_match to make the interface more flexible Hibernation: Introduce system_entering_hibernation
2009-01-27Hibernation: Introduce system_entering_hibernationRafael J. Wysocki
Introduce boolean function system_entering_hibernation() returning 'true' during the last phase of hibernation, in which devices are being put into low power states and the sleep state (for example, ACPI S4) is finally entered. Some device drivers need such a function to check if the system is in the final phase of hibernation. In particular, some SATA drivers are going to use it for blacklisting systems in which the disks should not be spun down during the last phase of hibernation (the BIOS will do that anyway). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-27signals, debug: fix BUG: using smp_processor_id() in preemptible code in ↵Ed Swierk
print_fatal_signal() With print-fatal-signals=1 on a kernel with CONFIG_PREEMPT=y, sending an unexpected signal to a process causes a BUG: using smp_processor_id() in preemptible code. get_signal_to_deliver() releases the siglock before calling print_fatal_signal(), which calls show_regs(), which calls smp_processor_id(), which is not supposed to be called from a preemptible thread. Make sure show_regs() runs with preemption disabled. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: fix kbuild.txt typos kbuild: print usage with no arguments in scripts/config Revert "kbuild: strip generated symbols from *.ko"
2009-01-26Merge branch 'sh/for-2.6.29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (22 commits) dma-coherent: Restore dma_alloc_from_coherent() large alloc fall back policy. dma-coherent: per-device coherent area is in pages, not bytes. sh: fix unaligned and nonexistent address handling nommu: Stub in vm_map_ram()/vm_unmap_ram()/vm_unmap_aliases(). sh: fix sh-sci / early printk build on sh7723 sh: export the sh7343 JPU to user space sh: update defconfigs. serial: sh-sci: Fix up SH7720/SH7721 SCI build. sh: Kill off obsolete busses from arch/sh/Kconfig. sh: sh7785lcr/highlander/hp6xx need linux/irq.h. sh: Migo-R MMC support using spi_gpio and mmc_spi. sh: ap325rxa MMC support using spi_gpio and mmc_spi sh: mach-x3proto: needs linux/irq.h. sh: Drop the BKL from sys_execve() on SH-5. sh: convert rsk7203 to use smsc911x. sh: convert magicpanelr2 platform to use smsc911x. sh: convert ap325rxa platform to use smsc911x. sh: mach-migor: Add tw9910 support. sh: mach-migor: Delete soc_camera_platform setup. sh: mach-migor: Add ov772x support. ...
2009-01-26Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: debugobjects: add and use INIT_WORK_ON_STACK rcu: remove duplicate CONFIG_RCU_CPU_STALL_DETECTOR relay: fix lock imbalance in relay_late_setup_files oprofile: fix uninitialized use of struct op_entry rcu: move Kconfig menu softlock: fix false panic which can occur if softlockup_thresh is reduced rcu: add __cpuinit to rcu_init_percpu_data()
2009-01-26Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimers: fix inconsistent lock state on resume in hres_timers_resume time-sched.c: tick_nohz_update_jiffies should be static locking, hpet: annotate false positive warning kernel/fork.c: unused variable 'ret' itimers: remove the per-cpu-ish-ness
2009-01-26Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (29 commits) xen: unitialised return value in xenbus_write_transaction x86: fix section mismatch warning x86: unmask CPUID levels on Intel CPUs, fix x86: work around PAGE_KERNEL_WC not getting WC in iomap_atomic_prot_pfn. x86: use standard PIT frequency xen: handle highmem pages correctly when shrinking a domain x86, mm: fix pte_free() xen: actually release memory when shrinking domain x86: unmask CPUID levels on Intel CPUs x86: add MSR_IA32_MISC_ENABLE bits to <asm/msr-index.h> x86: fix PTE corruption issue while mapping RAM using /dev/mem x86: mtrr fix debug boot parameter x86: fix page attribute corruption with cpa() Revert "x86: signal: change type of paramter for sys_rt_sigreturn()" x86: use early clobbers in usercopy*.c x86: remove kernel_physical_mapping_init() from init section fix: crash: IP: __bitmap_intersects+0x48/0x73 cpufreq: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write work_on_cpu: Use our own workqueue. work_on_cpu: don't try to get_online_cpus() in work_on_cpu. ...
2009-01-22ring-buffer: reset timestamps when ring buffer is resetSteven Rostedt
Impact: fix bad times of recent resets The ring buffer needs to reset its timestamps when reseting of the buffer, otherwise the timestamps are stale and might be used to calculate times in the buffer causing funny timestamps to appear. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-22Merge branch 'core/debugobjects' into core/urgentThomas Gleixner
2009-01-21trace: set max latency variable to zero on defaultSteven Rostedt
Impact: trace max latencies on start of latency tracing This patch sets the max latency to zero whenever one of the irq variant tracers or the wakeup tracer is set to current tracer. Most developers expect to see output when starting up a latency tracer. But since the max_latency is already set to max, and it takes a latency greater than max_latency to be recorded, there is no trace. This is not the expected behavior and has even confused myself. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21trace: stop all recording to ring buffer on ftrace_dumpSteven Rostedt
Impact: limit ftrace dump output Currently ftrace_dump only calls ftrace_kill that is a fast way to prevent the function tracer functions from being called (just sets a flag and clears the function to call, nothing else). It is better to also turn off any recording to the ring buffers as well. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21trace: print ftrace_dump at KERN_EMERG log levelSteven Rostedt
Impact: fix to print out ftrace_dump when expected I was debugging a hard race condition to only find out that after I hit the race, my log level was not at level to show KERN_INFO. The time it took to trigger the race was wasted because I did not capture the trace. Since ftrace_dump is only called from kernel oops (and only when it is set in the kernel command line to do so), or when a developer adds it to their own local tree, the log level of the print should be at KERN_EMERG to make sure the print appears. ftrace_dump is not called by a normal user setup, and will not add extra unwanted print out to the console. There is no reason it should be at KERN_INFO. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21ring_buffer: reset write when reserve buffer failLai Jiangshan
Impact: reset struct buffer_page.write when interrupt storm if struct buffer_page.write is not reset, any succedent committing will corrupted ring_buffer: static inline void rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer) { ...... cpu_buffer->commit_page->commit = cpu_buffer->commit_page->write; ...... } when "if (RB_WARN_ON(cpu_buffer, next_page == reader_page))", ring_buffer is disabled, but some reserved buffers may haven't been committed. we need reset struct buffer_page.write. when "if (unlikely(next_page == cpu_buffer->commit_page))", ring_buffer is still available, we should not corrupt it. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21tracing/function-graph-tracer: fix a regression while suspend to diskFrederic Weisbecker
Impact: fix a crash while kernel image restore When the function graph tracer is running and while suspend to disk, some racy and dangerous things happen against this tracer. The current task will save its registers including the stack pointer which contains the return address hooked by the tracer. But the current task will continue to enter other functions after that to save the memory, and then it will store other return addresses, and finally loose the old depth which matches the return address saved in the old stack (during the registers saving). So on image restore, the code will return to wrong addresses. And there are other things: on restore, the task will have it's "current" pointer overwritten during registers restoring....switching from one task to another... That would be insane to try to trace function graphs at these stages. This patch makes the function graph tracer listening on power events, making it's tracing disabled for the current task (the one that performs the hibernation work) while suspend/resume to disk, making the tracing safe during hibernation. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21dma-coherent: Restore dma_alloc_from_coherent() large alloc fall back policy.Paul Mundt
When doing large allocations (larger than the per-device coherent area) the generic memory allocators are silently fallen back on regardless of consideration for the per-device constraints. In the DMA_MEMORY_EXCLUSIVE case falling back on generic memory is not an option, as it tends not to be addressable by the DMA hardware in question. This issue showed up with the 8139too breakage on the Dreamcast, where non-addressable buffers were silently allocated due to the size mismatch calculation -- while it should have simply errored out upon being unable to satisfy the allocation with the given device constraints. This restores fall back behaviour to what it was before the oversized request change caused multiple regressions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21dma-coherent: per-device coherent area is in pages, not bytes.Adrian McMenamin
Commit 58c6d3dfe436eb8cfb451981d8fdc9044eaf42da ("dma-coherent: catch oversized requests to dma_alloc_from_coherent()") attempted to add a sanity check to bail out on allocations larger than the coherent area. Unfortunately when this was implemented, the fact the coherent area is tracked in pages rather than bytes was overlooked, which subsequently broke every single dma_alloc_from_coherent() user, forcing the allocation silently through generic memory instead. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk > Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-20ring-buffer: fix alignment problemSteven Rostedt
Impact: fix to allow some archs to use the ring buffer Commits in the ring buffer are checked by pointer arithmetic. If the calculation is incorrect, then the commits will never take place and the buffer will simply fill up and report an error. Each page in the ring buffer has a small header: struct buffer_data_page { u64 time_stamp; local_t commit; unsigned char data[]; }; Unfortuntely, some of the calculations used sizeof(struct buffer_data_page) to know the size of the header. But this is incorrect on some archs, where sizeof(struct buffer_data_page) does not equal offsetof(struct buffer_data_page, data), and on those archs, the commits are never processed. This patch replaces the sizeof with offsetof. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19work_on_cpu: Use our own workqueue.Rusty Russell
Impact: remove potential clashes with generic kevent workqueue Annoyingly, some places we want to use work_on_cpu are already in workqueues. As per Ingo's suggestion, we create a different workqueue for work_on_cpu. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19work_on_cpu: don't try to get_online_cpus() in work_on_cpu.Rusty Russell
Impact: remove potential circular lock dependency with cpu hotplug lock This has caused more problems than it solved, with a pile of cpu hotplug locking issues. Followup patches will get_online_cpus() in callers that need it, but if they don't do it they're no worse than before when they were using set_cpus_allowed without locking. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-18hrtimers: fix inconsistent lock state on resume in hres_timers_resumePeter Zijlstra
Andrey Borzenkov reported this lockdep assert: > [17854.688347] ================================= > [17854.688347] [ INFO: inconsistent lock state ] > [17854.688347] 2.6.29-rc2-1avb #1 > [17854.688347] --------------------------------- > [17854.688347] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. > [17854.688347] pm-suspend/18240 [HC0[0]:SC0[0]:HE1:SE1] takes: > [17854.688347] (&cpu_base->lock){++..}, at: [<c0136fcc>] retrigger_next_event+0x5c/0xa0 > [17854.688347] {in-hardirq-W} state was registered at: > [17854.688347] [<c01443cd>] __lock_acquire+0x79d/0x1930 > [17854.688347] [<c01455bc>] lock_acquire+0x5c/0x80 > [17854.688347] [<c03092e5>] _spin_lock+0x35/0x70 > [17854.688347] [<c0136e61>] hrtimer_run_queues+0x31/0x140 > [17854.688347] [<c0128d98>] run_local_timers+0x8/0x20 > [17854.688347] [<c0128dd3>] update_process_times+0x23/0x60 > [17854.688347] [<c013e274>] tick_periodic+0x24/0x80 > [17854.688347] [<c013e2e2>] tick_handle_periodic+0x12/0x70 > [17854.688347] [<c0104e24>] timer_interrupt+0x14/0x20 > [17854.688347] [<c01607b9>] handle_IRQ_event+0x29/0x60 > [17854.688347] [<c0161c59>] handle_level_irq+0x69/0xe0 > [17854.688347] [<ffffffff>] 0xffffffff > [17854.688347] irq event stamp: 55771 > [17854.688347] hardirqs last enabled at (55771): [<c0309125>] _spin_unlock_irqrestore+0x35/0x60 > [17854.688347] hardirqs last disabled at (55770): [<c0309419>] _spin_lock_irqsave+0x19/0x80 > [17854.688347] softirqs last enabled at (54836): [<c0124f54>] __do_softirq+0xc4/0x110 > [17854.688347] softirqs last disabled at (54831): [<c01049ae>] do_softirq+0x8e/0xe0 > [17854.688347] > [17854.688347] other info that might help us debug this: > [17854.688347] 3 locks held by pm-suspend/18240: > [17854.688347] #0: (&buffer->mutex){--..}, at: [<c01dd4c5>] sysfs_write_file+0x25/0x100 > [17854.688347] #1: (pm_mutex){--..}, at: [<c015056f>] enter_state+0x4f/0x140 > [17854.688347] #2: (dpm_list_mtx){--..}, at: [<c027880f>] device_pm_lock+0xf/0x20 > [17854.688347] > [17854.688347] stack backtrace: > [17854.688347] Pid: 18240, comm: pm-suspend Not tainted 2.6.29-rc2-1avb #1 > [17854.688347] Call Trace: > [17854.688347] [<c0306248>] ? printk+0x18/0x20 > [17854.688347] [<c0141fac>] print_usage_bug+0x16c/0x1d0 > [17854.688347] [<c0142bcf>] mark_lock+0x8bf/0xc90 > [17854.688347] [<c0106b8f>] ? pit_next_event+0x2f/0x40 > [17854.688347] [<c01441b0>] __lock_acquire+0x580/0x1930 > [17854.688347] [<c030916d>] ? _spin_unlock+0x1d/0x20 > [17854.688347] [<c0106b8f>] ? pit_next_event+0x2f/0x40 > [17854.688347] [<c013dd38>] ? clockevents_program_event+0x98/0x160 > [17854.688347] [<c0142fe8>] ? mark_held_locks+0x48/0x90 > [17854.688347] [<c0309125>] ? _spin_unlock_irqrestore+0x35/0x60 > [17854.688347] [<c0143229>] ? trace_hardirqs_on_caller+0x139/0x190 > [17854.688347] [<c014328b>] ? trace_hardirqs_on+0xb/0x10 > [17854.688347] [<c01455bc>] lock_acquire+0x5c/0x80 > [17854.688347] [<c0136fcc>] ? retrigger_next_event+0x5c/0xa0 > [17854.688347] [<c03092e5>] _spin_lock+0x35/0x70 > [17854.688347] [<c0136fcc>] ? retrigger_next_event+0x5c/0xa0 > [17854.688347] [<c0136fcc>] retrigger_next_event+0x5c/0xa0 > [17854.688347] [<c013711a>] hres_timers_resume+0xa/0x10 > [17854.688347] [<c013aa8e>] timekeeping_resume+0xee/0x150 > [17854.688347] [<c0273384>] __sysdev_resume+0x14/0x50 > [17854.688347] [<c0273407>] sysdev_resume+0x47/0x80 > [17854.688347] [<c02791ab>] device_power_up+0xb/0x20 > [17854.688347] [<c015043f>] suspend_devices_and_enter+0xcf/0x150 > [17854.688347] [<c0150c2f>] ? freeze_processes+0x3f/0x90 > [17854.688347] [<c0150614>] enter_state+0xf4/0x140 > [17854.688347] [<c01506dd>] state_store+0x7d/0xc0 > [17854.688347] [<c0150660>] ? state_store+0x0/0xc0 > [17854.688347] [<c0202da4>] kobj_attr_store+0x24/0x30 > [17854.688347] [<c01dd53c>] sysfs_write_file+0x9c/0x100 > [17854.688347] [<c019916c>] vfs_write+0x9c/0x160 > [17854.688347] [<c0103494>] ? restore_nocheck_notrace+0x0/0xe > [17854.688347] [<c01dd4a0>] ? sysfs_write_file+0x0/0x100 > [17854.688347] [<c01992ed>] sys_write+0x3d/0x70 > [17854.688347] [<c0103371>] sysenter_do_call+0x12/0x31 Andrey's analysis: > timekeeping_resume() is called via class ->resume > method; and according to comments in sysdev_resume() and > device_power_up(), they are called with interrupts disabled. > > Looking at suspend_enter, irqs *are* disabled at this point. > > So it actually looks like something (may be some driver) > unconditionally enabled irqs in resume path. Add a debug check to test this theory. If it triggers then it triggers because the resume code calls it with irqs enabled, which is a no-no not just for timekeeping_resume(), but also bad for a number of other resume handlers. Reported-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-18relay: fix lock imbalance in relay_late_setup_filesJiri Slaby
One fail path in relay_late_setup_files() omits mutex_unlock(&relay_channels_mutex); Add it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16Merge branch 'misc' into releaseLen Brown
2009-01-16kprobes: check CONFIG_FREEZER instead of CONFIG_PMMasami Hiramatsu
Check CONFIG_FREEZER instead of CONFIG_PM because kprobe booster depends on freeze_processes() and thaw_processes() when CONFIG_PREEMPT=y. This fixes a linkage error which occurs when CONFIG_PREEMPT=y, CONFIG_PM=y and CONFIG_FREEZER=n. Reported-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16PM: Fix freezer compilation if PM_SLEEP is unsetRafael J. Wysocki
Freezer fails to compile if with the following configuration settings: CONFIG_CGROUPS=y CONFIG_CGROUP_FREEZER=y CONFIG_MODULES=y CONFIG_FREEZER=y CONFIG_PM=y CONFIG_PM_SLEEP=n Fix this by making process.o compilation depend on CONFIG_FREEZER. Reported-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-15Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: sched_slice() fixlet sched: fix update_min_vruntime sched: SCHED_OTHER vs SCHED_IDLE isolation sched: SCHED_IDLE weight change sched: fix bandwidth validation for UID grouping Revert "sched: improve preempt debugging"
2009-01-15resources: fix parameter name and kernel-docRandy Dunlap
Fix __request_region() parameter kernel-doc notation and parameter name: Warning(linux-2.6.28-git10//kernel/resource.c:627): No description found for parameter 'flags' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15cgroups: consolidate cgroup documentsLi Zefan
Move Documentation/cpusets.txt and Documentation/controllers/* to Documentation/cgroups/ Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15sched: sched_slice() fixletLin Ming
Mike's change: 0a582440f "sched: fix sched_slice())" broke group scheduling by forgetting to reload cfs_rq on each loop. This patch fixes aim7 regression and specjbb2005 regression becomes less than 1.5% on 8-core stokley. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Jayson King <dev@jaysonking.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15[IA64] dump stack on kernel unaligned warningsDoug Chapman
Often the cause of kernel unaligned access warnings is not obvious from just the ip displayed in the warning. This adds the option via proc to dump the stack in addition to the warning. The default is off (just display the 1 line warning). To enable the stack to be shown: echo 1 > /proc/sys/kernel/unaligned-dump-stack Signed-off-by: Doug Chapman <doug.chapman@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-01-15sched: fix update_min_vruntimePeter Zijlstra
Impact: fix SCHED_IDLE latency problems OK, so we have 1 running task A (which is obviously curr and the tree is equally obviously empty). 'A' nicely chugs along, doing its thing, carrying min_vruntime along as it goes. Then some whacko speed freak SCHED_IDLE task gets inserted due to SMP balancing, which is very likely far right, in that case update_curr update_min_vruntime cfs_rq->rb_leftmost := true (the crazy task sitting in a tree) vruntime = se->vruntime and voila, min_vruntime is waaay right of where it ought to be. OK, so why did I write it like that to begin with... Aah, yes. Say we've just dequeued current schedule deactivate_task(prev) dequeue_entity update_min_vruntime Then we'll set vruntime = cfs_rq->min_vruntime; we find !cfs_rq->curr, but do find someone in the tree. Then we _must_ do vruntime = se->vruntime, because vruntime = min_vruntime(vruntime := cfs_rq->min_vruntime, se->vruntime) will not advance vruntime, and cause lags the other way around (which we fixed with that initial patch: 1af5f730fc1bf7c62ec9fb2d307206e18bf40a69 (sched: more accurate min_vruntime accounting). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Mike Galbraith <efault@gmx.de> Acked-by: Mike Galbraith <efault@gmx.de> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15sched: SCHED_OTHER vs SCHED_IDLE isolationPeter Zijlstra
Stronger SCHED_IDLE isolation: - no SCHED_IDLE buddies - never let SCHED_IDLE preempt on wakeup - always preempt SCHED_IDLE on wakeup - limit SLEEPER fairness for SCHED_IDLE. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15sched: SCHED_IDLE weight changePeter Zijlstra
Increase the SCHED_IDLE weight from 2 to 3, this gives much more stable vruntime numbers. time advanced in 100ms: weight=2 64765.988352 67012.881408 88501.412352 weight=3 35496.181411 34130.971298 35497.411573 Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15sched: fix bandwidth validation for UID groupingPeter Zijlstra
Impact: make rt-limit tunables work again Mark Glines reported: > I've got an issue on x86-64 where I can't configure the system to allow > RT tasks for a non-root user. > > In 2.6.26.5, I was able to do the following to set things up nicely: > echo 450000 >/sys/kernel/uids/0/cpu_rt_runtime > echo 450000 >/sys/kernel/uids/1000/cpu_rt_runtime > > Seems like every value I try to echo into the /sys files returns EINVAL. For UID grouping we initialize the root group with infinite bandwidth which by default is actually more than the global limit, therefore the bandwidth check always fails. Because the root group is a phantom group (for UID grouping) we cannot runtime adjust it, therefore we let it reflect the global bandwidth settings. Reported-by: Mark Glines <mark@glines.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15time-sched.c: tick_nohz_update_jiffies should be staticJaswinder Singh Rajput
Impact: cleanup, reduce kernel size a bit, avoid sparse warning Fixes sparse warning: kernel/time/tick-sched.c:137:6: warning: symbol 'tick_nohz_update_jiffies' was not declared. Should it be static? Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14Merge branch 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits) [CVE-2009-0029] s390 specific system call wrappers [CVE-2009-0029] System call wrappers part 33 [CVE-2009-0029] System call wrappers part 32 [CVE-2009-0029] System call wrappers part 31 [CVE-2009-0029] System call wrappers part 30 [CVE-2009-0029] System call wrappers part 29 [CVE-2009-0029] System call wrappers part 28 [CVE-2009-0029] System call wrappers part 27 [CVE-2009-0029] System call wrappers part 26 [CVE-2009-0029] System call wrappers part 25 [CVE-2009-0029] System call wrappers part 24 [CVE-2009-0029] System call wrappers part 23 [CVE-2009-0029] System call wrappers part 22 [CVE-2009-0029] System call wrappers part 21 [CVE-2009-0029] System call wrappers part 20 [CVE-2009-0029] System call wrappers part 19 [CVE-2009-0029] System call wrappers part 18 [CVE-2009-0029] System call wrappers part 17 [CVE-2009-0029] System call wrappers part 16 [CVE-2009-0029] System call wrappers part 15 ...