aboutsummaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2007-11-14kernel/taskstats.c: fix bogus nlmsg_free()Adrian Bunk
We'd better not nlmsg_free on a pointer containing an undefined value (and without having anything allocated). Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Balbir Singh <balbir@linux.vnet.ibm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14hibernate: fix lockdep reportJohannes Berg
Lockdep reports a circular locking dependency in the hibernate code because - during system boot hibernate code (from an initcall) locks pm_mutex and then a sysfs buffer mutex via name_to_dev_t - during regular operation hibernate code locks pm_mutex under a sysfs buffer mutex because it's called from sysfs methods. The deadlock can never happen because during initcall invocation nothing can write to sysfs yet. This removes the lockdep report by marking the initcall locking as being in a different class. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14__do_IRQ does not check IRQ_DISABLED when IRQ_PER_CPU is setRuss Anderson
In __do_IRQ(), the normal case is that IRQ_DISABLED is checked and if set the handler (handle_IRQ_event()) is not called. Earlier in __do_IRQ(), if IRQ_PER_CPU is set the code does not check IRQ_DISABLED and calls the handler even though IRQ_DISABLED is set. This behavior seems unintentional. One user encountering this behavior is the CPE handler (in arch/ia64/kernel/mca.c). When the CPE handler encounters too many CPEs (such as a solid single bit error), it sets up a polling timer and disables the CPE interrupt (to avoid excessive overhead logging the stream of single bit errors). disable_irq_nosync() is called which sets IRQ_DISABLED. The IRQ_PER_CPU flag was previously set (in ia64_mca_late_init()). The net result is the CPE handler gets called even though it is marked disabled. If the behavior of not checking IRQ_DISABLED when IRQ_PER_CPU is set is intentional, it would be worthy of a comment describing the intended behavior. disable_irq_nosync() does call chip->disable() to provide a chipset specifiec interface for disabling the interrupt, which avoids this issue when used. Signed-off-by: Russ Anderson <rja@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14pidns: Place under CONFIG_EXPERIMENTALEric W. Biederman
This is my trivial patch to swat innumerable little bugs with a single blow. After some intensive review (my apologies for not having gotten to this sooner) what we have looks like a good base to build on with the current pid namespace code but it is not complete, and it is still much to simple to find issues where the kernel does the wrong thing outside of the initial pid namespace. Until the dust settles and we are certain we have the ABI and the implementation is as correct as humanly possible let's keep process ID namespaces behind CONFIG_EXPERIMENTAL. Allowing us the option of fixing any ABI or other bugs we find as long as they are minor. Allowing users of the kernel to avoid those bugs simply by ensuring their kernel does not have support for multiple pid namespaces. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Adrian Bunk <bunk@kernel.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kir Kolyshkin <kir@swsoft.com> Cc: Kirill Korotaev <dev@sw.ru> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14fix param_sysfs_builtin name length checkJan Kiszka
Commit faf8c714f4508207a9c81cc94dafc76ed6680b44 caused a regression: parameter names longer than MAX_KBUILD_MODNAME will now be rejected, although we just need to keep the module name part that short. This patch restores the old behaviour while still avoiding that memchr is called with its length parameter larger than the total string length. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14Linux Kernel Markers: fix marker mutex not taken upon module loadMathieu Desnoyers
Upon module load, we must take the markers mutex. It implies that the marker mutex must be nested inside the module mutex. It implies changing the nesting order : now the marker mutex nests inside the module mutex. Make the necessary changes to reverse the order in which the mutexes are taken. Includes some cleanup from Dave Hansen <haveblue@us.ibm.com>. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14revert "Task Control Groups: example CPU accounting subsystem"Andrew Morton
Revert 62d0df64065e7c135d0002f069444fbdfc64768f. This was originally intended as a simple initial example of how to create a control groups subsystem; it wasn't intended for mainline, but I didn't make this clear enough to Andrew. The CFS cgroup subsystem now has better functionality for the per-cgroup usage accounting (based directly on CFS stats) than the "usage" status file in this patch, and the "load" status file is rather simplistic - although having a per-cgroup load average report would be a useful feature, I don't believe this patch actually provides it. If it gets into the final 2.6.24 we'd probably have to support this interface for ever. Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14Add IORESOUCE_BUSY flag for System RAMYasunori Goto
i386 and x86-64 registers System RAM as IORESOURCE_MEM | IORESOURCE_BUSY. But ia64 registers it as IORESOURCE_MEM only. In addition, memory hotplug code registers new memory as IORESOURCE_MEM too. This difference causes a failure of memory unplug of x86-64. This patch fixes it. This patch adds IORESOURCE_BUSY to avoid potential overlap mapping by PCI device. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Luck, Tony" <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14Improve cgroup printksDiego Calleja
When I boot with the 'quiet' parameter, I see on the screen: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 39.036026] Initializing cgroup subsys cpuacct [ 39.036080] Initializing cgroup subsys debug [ 39.036118] Initializing cgroup subsys ns This patch lowers the priority of those messages, adds a "cgroup: " prefix to another couple of printks and kills the useless reference to the source file. Signed-off-by: Diego Calleja <diegocg@gmail.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14sysctl: check length at deprecated_sysctl_warningTetsuo Handa
Original patch assumed args->nlen < CTL_MAXNAME, but it can be false. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-12sigwait eats blocked default-ignore signalsRoland McGrath
While a signal is blocked, it must be posted even if its action is SIG_IGN or is SIG_DFL with the default action to ignore. This works right most of the time, but is broken when a sigwait (rt_sigtimedwait) is in progress. This changes the early-discard check to respect real_blocked. ~blocked is the set to check for "should wake up now", but ~(blocked|real_blocked) is the set for "blocked" semantics as defined by POSIX. This fixes bugzilla entry 9347, see http://bugzilla.kernel.org/show_bug.cgi?id=9347 Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-09[FUTEX] Fix address computation in compat code.David Miller
compat_exit_robust_list() computes a pointer to the futex entry in userspace as follows: (void __user *)entry + futex_offset 'entry' is a 'struct robust_list __user *', and 'futex_offset' is a 'compat_long_t' (typically a 's32'). Things explode if the 32-bit sign bit is set in futex_offset. Type promotion sign extends futex_offset to a 64-bit value before adding it to 'entry'. This triggered a problem on sparc64 running 32-bit applications which would lock up a cpu looping forever in the fault handling for the userspace load in handle_futex_death(). Compat userspace runs with address masking (wherein the cpu zeros out the top 32-bits of every effective address given to a memory operation instruction) so the sparc64 fault handler accounts for this by zero'ing out the top 32-bits of the fault address too. Since the kernel properly uses the compat_uptr interfaces, kernel side accesses to compat userspace work too since they will only use addresses with the top 32-bit clear. Because of this compat futex layer bug we get into the following loop when executing the get_user() load near the top of handle_futex_death(): 1) load from address '0xfffffffff7f16bd8', FAULT 2) fault handler clears upper 32-bits, processes fault for address '0xf7f16bd8' which succeeds 3) goto #1 I want to thank Bernd Zeimetz, Josip Rodin, and Fabio Massimo Di Nitto for their tireless efforts helping me track down this bug. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-09sched: proper prototype for kernel/sched.c:migration_init()Adrian Bunk
This patch adds a proper prototype for migration_init() in include/linux/sched.h Since there's no point in always returning 0 to a caller that doesn't check the return value it also changes the function to return void. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: avoid large irq-latencies in smp-balancingPeter Zijlstra
SMP balancing is done with IRQs disabled and can iterate the full rq. When rqs are large this can cause large irq-latencies. Limit the nr of iterations on each run. This fixes a scheduling latency regression reported by the -rt folks. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: fix copy_namespace() <-> sched_fork() dependency in do_forkSrivatsa Vaddagiri
Sukadev Bhattiprolu reported a kernel crash with control groups. There are couple of problems discovered by Suka's test: - The test requires the cgroup filesystem to be mounted with atleast the cpu and ns options (i.e both namespace and cpu controllers are active in the same hierarchy). # mkdir /dev/cpuctl # mount -t cgroup -ocpu,ns none cpuctl (or simply) # mount -t cgroup none cpuctl -> Will activate all controllers in same hierarchy. - The test invokes clone() with CLONE_NEWNS set. This causes a a new child to be created, also a new group (do_fork->copy_namespaces->ns_cgroup_clone-> cgroup_clone) and the child is attached to the new group (cgroup_clone-> attach_task->sched_move_task). At this point in time, the child's scheduler related fields are uninitialized (including its on_rq field, which it has inherited from parent). As a result sched_move_task thinks its on runqueue, when it isn't. As a solution to this problem, I moved sched_fork() call, which initializes scheduler related fields on a new task, before copy_namespaces(). I am not sure though whether moving up will cause other side-effects. Do you see any issue? - The second problem exposed by this test is that task_new_fair() assumes that parent and child will be part of the same group (which needn't be as this test shows). As a result, cfs_rq->curr can be NULL for the child. The solution is to test for curr pointer being NULL in task_new_fair(). With the patch below, I could run ns_exec() fine w/o a crash. Reported-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: clean up the wakeup preempt check, #2Ingo Molnar
clean up the preemption check to not use unnecessary 64-bit variables. This improves code size: text data bss dec hex filename 44227 3326 36 47589 b9e5 sched.o.before 44201 3326 36 47563 b9cb sched.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: clean up the wakeup preempt checkIngo Molnar
clean up the wakeup preemption check. No code changed: text data bss dec hex filename 44227 3326 36 47589 b9e5 sched.o.before 44227 3326 36 47589 b9e5 sched.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: wakeup preemption fixIngo Molnar
wakeup preemption fix: do not make it dependent on p->prio. Preemption purely depends on ->vruntime. This improves preemption in mixed-nice-level workloads. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: remove PREEMPT_RESTRICTIngo Molnar
remove PREEMPT_RESTRICT. (this is a separate commit so that any regression related to the removal itself is bisectable) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: turn off PREEMPT_RESTRICTIngo Molnar
PREEMPT_RESTRICT was a method aimed at reducing the amount of wakeup related preemption. It has a disadvantage though, it can prevent legitimate wakeups if a task is 'unlucky' to be hit too early by a tick that clears peer_preempt. Now that the wakeup preemption has been cleaned up we dont seem to have excessive preemptions anymore, so this feature can be turned off. (and removed in the next patch) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: cleanup, use NSEC_PER_MSEC and NSEC_PER_SECEric Dumazet
1) hardcoded 1000000000 value is used five times in places where NSEC_PER_SEC might be more readable. 2) A conversion from nsec to msec uses the hardcoded 1000000 value, which is a candidate for NSEC_PER_MSEC. no code changed: text data bss dec hex filename 44359 3326 36 47721 ba69 sched.o.before 44359 3326 36 47721 ba69 sched.o.after Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: reintroduce SMP tunings againIngo Molnar
Yanmin Zhang reported an aim7 regression and bisected it down to: | commit 38ad464d410dadceda1563f36bdb0be7fe4c8938 | Author: Ingo Molnar <mingo@elte.hu> | Date: Mon Oct 15 17:00:02 2007 +0200 | | sched: uniform tunings | | use the same defaults on both UP and SMP. fix this by reintroducing similar SMP tunings again. This resolves the regression. (also update the comments to match the ilog2(nr_cpus) tuning effect) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: restore deterministic CPU accounting on powerpcPaul Mackerras
Since powerpc started using CONFIG_GENERIC_CLOCKEVENTS, the deterministic CPU accounting (CONFIG_VIRT_CPU_ACCOUNTING) has been broken on powerpc, because we end up counting user time twice: once in timer_interrupt() and once in update_process_times(). This fixes the problem by pulling the code in update_process_times that updates utime and stime into a separate function called account_process_tick. If CONFIG_VIRT_CPU_ACCOUNTING is not defined, there is a version of account_process_tick in kernel/timer.c that simply accounts a whole tick to either utime or stime as before. If CONFIG_VIRT_CPU_ACCOUNTING is defined, then arch code gets to implement account_process_tick. This also lets us simplify the s390 code a bit; it means that the s390 timer interrupt can now call update_process_times even when CONFIG_VIRT_CPU_ACCOUNTING is turned on, and can just implement a suitable account_process_tick(). account_process_tick() now takes the task_struct * as an argument. Tested both with and without CONFIG_VIRT_CPU_ACCOUNTING. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: fix delay accounting regressionBalbir Singh
Fix the delay accounting regression introduced by commit 75d4ef16a6aa84f708188bada182315f80aab6fa. rq no longer has sched_info data associated with it. task_struct sched_info structure is used by delay accounting to provide back statistics to user space. also remove direct use of sched_clock() (which is not a valid thing to do anymore) and use rq->clock instead. Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: reintroduce the sched_min_granularity tunablePeter Zijlstra
we lost the sched_min_granularity tunable to a clever optimization that uses the sched_latency/min_granularity ratio - but the ratio is quite unintuitive to users and can also crash the kernel if the ratio is set to 0. So reintroduce the min_granularity tunable, while keeping the ratio maintained internally. no functionality changed. [ mingo@elte.hu: some fixlets. ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: documentation: place_entity() commentsPeter Zijlstra
Add a few comments to place_entity(). No code changed. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09sched: fix vslicePeter Zijlstra
vslice was missing a factor NICE_0_LOAD, as weight is in weight*NICE_0_LOAD units. the effect of this bug was larger initial slices and thus latency-noisier forks. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-05time: fix inconsistent function names in commentsLi Zefan
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05Dump stack during sysctl registration failureAlexey Dobriyan
Let's make immediately obvious from where sysctl comes from and messages itself more noticeable. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05kernel/futex.c: make 3 functions staticAdrian Bunk
The following functions can now become static again: - get_futex_key() - get_futex_key_refs() - drop_futex_key_refs() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-03Merge branch 'v2.6.24-rc1-lockdep' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: lockdep: fix a typo in the __lock_acquire comment sched: fix unconditional irq lock lockdep: fixup irq tracing
2007-10-30[COMPAT]: Fix build on COMPAT platforms when CONFIG_NET is disabled.David S. Miller
Add some missing cond_syscall() entries for this case. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30Freezer: do not allow freezing processes to clear TIF_SIGPENDINGRafael J. Wysocki
Do not allow processes to clear their TIF_SIGPENDING if TIF_FREEZE is set, so that they will not race with the freezer (like mysqld does, for example). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@suspend2.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-30sched: fix /proc/<PID>/stat stime/utime monotonicity, part 2Balbir Singh
Extend Peter's patch to fix accounting issues, by keeping stime monotonic too. Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Frans Pop <elendil@planet.nl>
2007-10-29sched: fix style in kernel/sched.cIngo Molnar
fallout of recent commits: small coding style fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-29sched: fix style of swap() macro in kernel/sched_fair.cIngo Molnar
fix style of swap() macro in kernel/sched_fair.c. ( this macro should eventually move to a general header, as ext3 uses a similar construct too. ) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-29sched: report CPU usage in CFS cgroup directoriesPaul Menage
Adds a cpu.usage file to the CFS cgroup that reports CPU usage in milliseconds for that cgroup's tasks [ mingo@elte.hu: style cleanups. ] Signed-off-by: Paul Menage <menage@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-29sched: move rcu_head to task_group structSrivatsa Vaddagiri
Peter Zijlstra noticed that the rcu_head object need not be present in every cfs_rq of a group. Move it to the task_group structure instead. Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-29sched: fix incorrect assumption that cpu 0 existsJames Bottomley
This patch: commit 9b5b77512dce239fa168183fa71896712232e95a Author: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Date: Mon Oct 15 17:00:09 2007 +0200 sched: clean up code under CONFIG_FAIR_GROUP_SCHED Introduced an assumption of the existence of CPU0 via this line cfs_rq = tg->cfs_rq[0]; If you have no CPU0, that will be NULL. The fix seems to be just to take whatever cfs_rq queue comes out of the for_each_possible_cpu() loop, since they're all equally good for the destruction operation. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-29sched: keep utime/stime monotonicPeter Zijlstra
keep utime/stime monotonic. cpustats use utime/stime as a ratio against sum_exec_runtime, as a consequence it can happen - when the ratio changes faster than time accumulates - that either can be appear to go backwards. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-29sched: make kernel/sched.c:account_guest_time() staticAdrian Bunk
account_guest_time() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrtLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: Quieten hrtimer printk: "Switched to high resolution mode .." timer_list: Fix printk format strings clockevents: unexport tick_nohz_get_sleep_length
2007-10-29x86 merge fallout: umlAl Viro
Don't undef __i386__/__x86_64__ in uml anymore, make sure that (few) places that required adjusting the ifdefs got those. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-29Quieten hrtimer printk: "Switched to high resolution mode .."Michael Ellerman
Change the hrtimer printk "Switched to high resolution mode .." to be KERN_DEBUG, rather than KERN_INFO. If users need to see this they can pass "loglevel" or "debug" on the command line, or check dmesg. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> kernel/hrtimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
2007-10-29timer_list: Fix printk format stringsVegard Nossum
This makes sure printk format strings contain no more than a single line. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-29clockevents: unexport tick_nohz_get_sleep_lengthAdrian Bunk
This patch removes the unused EXPORT_SYMBOL_GPL(tick_nohz_get_sleep_length). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-28lockdep: fix a typo in the __lock_acquire commentGautham R Shenoy
Fix a typo in the __lock_acquire comment. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-25sched: fix unconditional irq lockPeter Zijlstra
Lockdep noticed that this lock can also be taken from hardirq context, and can thus not unconditionally disable/enable irqs. WARNING: at kernel/lockdep.c:2033 trace_hardirqs_on() [show_trace_log_lvl+26/48] show_trace_log_lvl+0x1a/0x30 [show_trace+18/32] show_trace+0x12/0x20 [dump_stack+22/32] dump_stack+0x16/0x20 [trace_hardirqs_on+405/416] trace_hardirqs_on+0x195/0x1a0 [_read_unlock_irq+34/48] _read_unlock_irq+0x22/0x30 [sched_debug_show+2615/4224] sched_debug_show+0xa37/0x1080 [show_state_filter+326/368] show_state_filter+0x146/0x170 [sysrq_handle_showstate+10/16] sysrq_handle_showstate+0xa/0x10 [__handle_sysrq+123/288] __handle_sysrq+0x7b/0x120 [handle_sysrq+40/64] handle_sysrq+0x28/0x40 [kbd_event+1045/1680] kbd_event+0x415/0x690 [input_pass_event+206/208] input_pass_event+0xce/0xd0 [input_handle_event+170/928] input_handle_event+0xaa/0x3a0 [input_event+95/112] input_event+0x5f/0x70 [atkbd_interrupt+434/1456] atkbd_interrupt+0x1b2/0x5b0 [serio_interrupt+59/128] serio_interrupt+0x3b/0x80 [i8042_interrupt+263/576] i8042_interrupt+0x107/0x240 [handle_IRQ_event+40/96] handle_IRQ_event+0x28/0x60 [handle_edge_irq+175/320] handle_edge_irq+0xaf/0x140 [do_IRQ+64/128] do_IRQ+0x40/0x80 [common_interrupt+46/52] common_interrupt+0x2e/0x34 Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24sched: isolate SMP balancing code a bit morePeter Williams
At the moment, a lot of load balancing code that is irrelevant to non SMP systems gets included during non SMP builds. This patch addresses this issue and reduces the binary size on non SMP systems: text data bss dec hex filename 10983 28 1192 12203 2fab sched.o.before 10739 28 1192 11959 2eb7 sched.o.after Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24sched: reduce balance-tasks overheadPeter Williams
At the moment, balance_tasks() provides low level functionality for both move_tasks() and move_one_task() (indirectly) via the load_balance() function (in the sched_class interface) which also provides dual functionality. This dual functionality complicates the interfaces and internal mechanisms and makes the run time overhead of operations that are called with two run queue locks held. This patch addresses this issue and reduces the overhead of these operations. Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>