| Age | Commit message (Collapse) | Author |
|---|
|
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up
handling of log-levels and newlines") changed printk semantics. printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.
<level> is now included in the output on each additional use.
Remove all uses of multiple KERN_<level>s in formats.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix various silly problems wrt mnt_namespace.h:
- exit_mnt_ns() isn't used, remove it
- done that, sched.h and nsproxy.h inclusions aren't needed
- mount.h inclusion was need for vfsmount_lock, but no longer
- remove mnt_namespace.h inclusion from files which don't use anything
from mnt_namespace.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_execve() and ptrace_attach() return -EINTR if
mutex_lock_interruptible(->cred_guard_mutex) fails.
This is not right, change the code to return ERESTARTNOINTR.
Perhaps we should also change proc_pid_attr_write().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These warnings were observed on MIPS32 using 2.6.31-rc1 and gcc-4.2.0:
mm/page_alloc.c: In function 'alloc_pages_exact':
mm/page_alloc.c:1986: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast
drivers/usb/mon/mon_bin.c: In function 'mon_alloc_buff':
drivers/usb/mon/mon_bin.c:1264: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast
[akpm@linux-foundation.org: fix kernel/perf_counter.c too]
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'kmemleak' of git://linux-arm.org/linux-2.6:
kmemleak: Inform kmemleak about pid_hash
kmemleak: Do not warn if an unknown object is freed
kmemleak: Do not report new leaked objects if the scanning was stopped
kmemleak: Slightly change the policy on newly allocated objects
kmemleak: Do not trigger a scan when reading the debug/kmemleak file
kmemleak: Simplify the reports logged by the scanning thread
kmemleak: Enable task stacks scanning by default
kmemleak: Allow the early log buffer to be configurable.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (47 commits)
perf report: Add --symbols parameter
perf report: Add --comms parameter
perf report: Add --dsos parameter
perf_counter tools: Adjust only prelinked symbol's addresses
perf_counter: Provide a way to enable counters on exec
perf_counter tools: Reduce perf stat measurement overhead/skew
perf stat: Use percentages for scaling output
perf_counter, x86: Update x86_pmu after WARN()
perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run
perf stat: Improve output
perf stat: Fix multi-run stats
perf stat: Add -n/--null option to run without counters
perf_counter tools: Remove dead code
perf_counter: Complete counter swap
perf report: Print sorted callchains per histogram entries
perf_counter tools: Prepare a small callchain framework
perf record: Fix unhandled io return value
perf_counter tools: Add alias for 'l1d' and 'l1i'
perf-report: Add bare minimum PERF_EVENT_READ parsing
perf-report: Add modes for inherited stats and no-samples
...
|
|
The file opened in acct_on and freshly stored in the ns->bacct struct can
be closed in acct_file_reopen by a concurrent call after we release
acct_lock and before we call mntput(file->f_path.mnt).
Record file->f_path.mnt in a local variable and use this variable only.
Signed-off-by: Renaud Lottiaux <renaud.lottiaux@kerlabs.com>
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the 32-bit signed quantities get assigned to the u64 resource_size_t,
they are incorrectly sign-extended.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13253
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9905
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: Leann Ogasawara <leann@ubuntu.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Reported-by: <pablomme@googlemail.com>
Tested-by: <pablomme@googlemail.com>
Cc: <stable@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This provides a way to mark a counter to be enabled on the next
exec. This is useful for measuring the total activity of a
program without including overhead from the process that
launches it.
This also changes the perf stat command to use this new
facility.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19017.43927.838745.689203@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Kmemleak does not track alloc_bootmem calls but the pid_hash allocated
in pidhash_init() would need to be scanned as it contains pointers to
struct pid objects.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, delay: tsc based udelay should have rdtsc_barrier
x86, setup: correct include file in <asm/boot.h>
x86, setup: Fix typo "CONFIG_x86_64" in <asm/boot.h>
x86, mce: percpu mcheck_timer should be pinned
x86: Add sysctl to allow panic on IOCK NMI error
x86: Fix uv bau sending buffer initialization
x86, mce: Fix mce resume on 32bit
x86: Move init_gbpages() to setup_arch()
x86: ensure percpu lpage doesn't consume too much vmalloc space
x86: implement percpu_alloc kernel parameter
x86: fix pageattr handling for lpage percpu allocator and re-enable it
x86: reorganize cpa_process_alias()
x86: prepare setup_pcpu_lpage() for pageattr fix
x86: rename remap percpu first chunk allocator to lpage
x86: fix duplicate free in setup_pcpu_remap() failure path
percpu: fix too lazy vunmap cache flushing
x86: Set cpu_llc_id on AMD CPUs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timer stats: Optimize by adding quick check to avoid function calls
timers: Fix timer_migration interface which accepts any number as input
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ftrace: Fix the output of profile
ring-buffer: Make it generally available
ftrace: Remove duplicate newline
tracing: Fix trace_buf_size boot option
ftrace: Fix t_hash_start()
ftrace: Don't manipulate @pos in t_start()
ftrace: Don't increment @pos in g_start()
tracing: Reset iterator in t_start()
trace_stat: Don't increment @pos in seq start()
tracing_bprintk: Don't increment @pos in t_start()
tracing/events: Don't increment @pos in s_start()
|
|
Complete the counter swap by indeed switching the times too and
updating the userpage after modifying the counter values.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246014623.31755.195.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The first entry of the ftrace profile was always skipped when
reading trace_stat/functionX.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A443D59.4080307@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch introduces a new sysctl:
/proc/sys/kernel/panic_on_io_nmi
which defaults to 0 (off).
When enabled, the kernel panics when the kernel receives an NMI
caused by an IO error.
The IO error triggered NMI indicates a serious system
condition, which could result in IO data corruption. Rather
than contiuing, panicing and dumping might be a better choice,
so one can figure out what's causing the IO error.
This could be especially important to companies running IO
intensive applications where corruption must be avoided, e.g. a
bank's databases.
[ SuSE has been shipping it for a while, it was done at the
request of a large database vendor, for their users. ]
Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Roberto Angelino <robertangelino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <20090624213211.GA11291@kroah.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The PERF_EVENT_READ implementation made me realize we don't
actually need the sample_type int the output sample, since
we already have that in the perf_counter_attr information.
Therefore, remove the PERF_EVENT_MISC_OVERFLOW bit and the
event->type overloading, and imply put counter overflow
samples in a PERF_EVENT_SAMPLE type.
This also fixes the issue that event->type was only 32-bit
and sample_type had 64 usable bits.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
With the introduction of PERF_EVENT_READ we have the
possibility to provide accurate counter values for
individual tasks in a task hierarchy.
However, due to the lazy context switching used for similar
counter contexts our current per task counts are way off.
In order to maintain some of the lazy switch benefits we
don't disable it out-right, but simply iterate the active
counters and flip the values between the contexts.
This only reads the counters but does not need to reprogram
the full PMU.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Provide a read() like event which can be used to log the
counter value at specific sites such as child->parent
folding on exit.
In order to be useful, we log the counter parent ID, not the
actual counter ID, since userspace can only relate parent
IDs to perf_counter_attr constructs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Update the mmap control page with the needed information to
use the userspace RDPMC instruction for self monitoring.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add the needed time scale to the self-profile mmap information.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Yanmin noticed that fault_in_user_writeable() requests 4 pages instead
of one.
That's the result of blindly trusting Linus' proposal :) I even looked
up the prototype to verify the correctness: the argument in question
is confusingly enough named "len" while in reality it means number of
pages.
Pointed-out-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In hunting down the cause for the hwlat_detector ring buffer spew in
my failed -next builds it became obvious that folks are now treating
ring_buffer as something that is generic independent of tracing and thus,
suitable for public driver consumption.
Given that there are only a few minor areas in ring_buffer that have any
reliance on CONFIG_TRACING or CONFIG_FUNCTION_TRACER, provide stubs for
those and make it generally available.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jon Masters <jcm@jonmasters.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090625053012.GB19944@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Before:
# echo 'sys_open:traceon:' > set_ftrace_filter
# echo 'sys_close:traceoff:5' > set_ftrace_filter
# cat set_ftrace_filter
#### all functions enabled ####
sys_open:traceon:unlimited
sys_close:traceoff:count=0
After:
# cat set_ftrace_filter
#### all functions enabled ####
sys_open:traceon:unlimited
sys_close:traceoff:count=0
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4313A7.7030105@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs-2.6,audit-current}
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
another race fix in jfs_check_acl()
Get "no acls for this inode" right, fix shmem breakage
inline functions left without protection of ifdef (acl)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL
|
|
Even though one cannot make use of the audit watch code without
CONFIG_AUDIT_SYSCALL the spaghetti nature of the audit code means that
the audit rule filtering requires that it at least be compiled.
Thus build the audit_watch code when we build auditfilter like it was
before cfcad62c74abfef83762dc05a556d21bdf3980a2
Clearly this is a point of potential future cleanup..
Reported-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
commit 64d1304a64 (futex: setup writeable mapping for futex ops which
modify user space data) did address only half of the problem of write
access faults.
The patch was made on two wrong assumptions:
1) access_ok(VERIFY_WRITE,...) would actually check write access.
On x86 it does _NOT_. It's a pure address range check.
2) a RW mapped region can not go away under us.
That's wrong as well. Nobody can prevent another thread to call
mprotect(PROT_READ) on that region where the futex resides. If that
call hits between the get_user_pages_fast() verification and the
actual write access in the atomic region we are toast again.
The solution is to not rely on access_ok and get_user() for any write
access related fault on private and shared futexes. Instead we need to
fault it in with verification of write access.
There is no generic non destructive write mechanism which would fault
the user page in trough a #PF, but as we already know that we will
fault we can as well call get_user_pages() directly and avoid the #PF
overhead.
If get_user_pages() returns -EFAULT we know that we can not fix it
anymore and need to bail out to user space.
Remove a bunch of confusing comments on this issue as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
|
|
We should be able to specify [KMG] when setting trace_buf_size
boot option, as documented in kernel-parameters.txt
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41F2DB.4020102@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When the kernel is configured with CONFIG_TIMER_STATS but timer
stats are runtime disabled we still get calls to
__timer_stats_timer_set_start_info which initializes some
fields in the corresponding struct timer_list.
So add some quick checks in the the timer stats setup functions
to avoid function calls to __timer_stats_timer_set_start_info
when timer stats are disabled.
In an artificial workload that does nothing but playing ping
pong with a single tcp packet via loopback this decreases cpu
consumption by 1 - 1.5%.
This is part of a modified function trace output on SLES11:
perl-2497 [00] 28630647177732388 [+ 125]: sk_reset_timer <-tcp_v4_rcv
perl-2497 [00] 28630647177732513 [+ 125]: mod_timer <-sk_reset_timer
perl-2497 [00] 28630647177732638 [+ 125]: __timer_stats_timer_set_start_info <-mod_timer
perl-2497 [00] 28630647177732763 [+ 125]: __mod_timer <-mod_timer
perl-2497 [00] 28630647177732888 [+ 125]: __timer_stats_timer_set_start_info <-__mod_timer
perl-2497 [00] 28630647177733013 [+ 93]: lock_timer_base <-__mod_timer
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mustafa Mesanovic <mustafa.mesanovic@de.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20090623153811.GA4641@osiris.boeblingen.de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When the output of set_ftrace_filter is larger than PAGE_SIZE,
t_hash_start() will be called the 2nd time, and then we start
from the head of a hlist, which is wrong and causes some entries
to be outputed twice.
The worse is, if the hlist is large enough, reading set_ftrace_filter
won't stop but in a dead loop.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41876E.2060407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It's rather confusing that in t_start(), in some cases @pos is
incremented, and in some cases it's decremented and then incremented.
This patch rewrites t_start() in a much more general way.
Thus we fix a bug that if ftrace_filtered == 1, functions have tracer
hooks won't be printed, because the branch is always unreachable:
static void *t_start(...)
{
...
if (!p)
return t_hash_start(m, pos);
return p;
}
Before:
# echo 'sys_open' > /mnt/tracing/set_ftrace_filter
# echo 'sys_write:traceon:4' >> /mnt/tracing/set_ftrace_filter
sys_open
After:
# echo 'sys_open' > /mnt/tracing/set_ftrace_filter
# echo 'sys_write:traceon:4' >> /mnt/tracing/set_ftrace_filter
sys_open
sys_write:traceon:count=4
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41874B.4090507@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It's wrong to increment @pos in g_start(). It causes some entries
lost when reading set_graph_function, if the output of the file
is larger than PAGE_SIZE.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418738.7090401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The iterator is m->private, but it's not reset to trace_types in
t_start(). If the output is larger than PAGE_SIZE and t_start()
is called the 2nd time, things will go wrong.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418728.5020506@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It's wrong to increment @pos in stat_seq_start(). It causes some
stat entries lost when reading stat file, if the output of the file
is larger than PAGE_SIZE.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418716.90209@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It's wrong to increment @pos in t_start(), otherwise we'll lose
some entries when reading printk_formats, if the output is larger
than PAGE_SIZE.
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4186FA.1020106@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
While testing syscall tracepoints posted by Jason, I found 3 entries
were missing when reading available_events. The output size of
available_events is < 4 pages, which means we lost 1 entry per page.
The cause is, it's wrong to increment @pos in s_start().
Actually there's another bug here -- reading avaiable_events/set_events
can race with module unload:
# cat available_events |
s_start() |
s_stop() |
| # rmmod foo.ko
s_start() |
call = list_entry(m->private) |
@call might be freed and accessing it will lead to crash.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4186DD.6090405@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If syscall removes the root of subtree being watched, we
definitely do not want the rules refering that subtree
to be destroyed without the syscall in question having
a chance to match them.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
A number of places in the audit system we send an op= followed by a string
that includes spaces. Somehow this works but it's just wrong. This patch
moves all of those that I could find to be quoted.
Example:
Change From: type=CONFIG_CHANGE msg=audit(1244666690.117:31): auid=0 ses=1
subj=unconfined_u:unconfined_r:auditctl_t:s0-s0:c0.c1023 op=remove rule
key="number2" list=4 res=0
Change To: type=CONFIG_CHANGE msg=audit(1244666690.117:31): auid=0 ses=1
subj=unconfined_u:unconfined_r:auditctl_t:s0-s0:c0.c1023 op="remove rule"
key="number2" list=4 res=0
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
audit_get_nd() is only used by audit_watch and could be more cleanly
implemented by having the audit watch functions call it when needed rather
than making the generic audit rule parsing code deal with those objects.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
In preparation for converting audit to use fsnotify instead of inotify we
seperate the inode watching code into it's own file. This is similar to
how the audit tree watching code is already seperated into audit_tree.c
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
audit_receive_skb is hard to clearly parse what it is doing to the netlink
message. Clean the function up so it is easy and clear to see what is going
on.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
The audit handling of netlink messages is all over the place. Clean things
up, use predetermined macros, generally make it more readable.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Remove code duplication of skb printk when auditd is not around in userspace
to deal with this message.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
audit_update_watch() runs all of the rules for a given watch and duplicates
them, attaches a new watch to them, and then when it finishes that process
and has called free on all of the old rules (ok maybe still inside the rcu
grace period) it proceeds to use the last element from list_for_each_entry_safe()
as if it were a krule rather than being the audit_watch which was anchoring
the list to output a message about audit rules changing.
This patch unfies the audit message from two different places into a helper
function and calls it from the correct location in audit_update_rules(). We
will now get an audit message about the config changing for each rule (with
each rules filterkey) rather than the previous garbage.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
The audit execve record splitting code estimates the length of the message
generated. But it forgot to include the "" that wrap each string in its
estimation. This means that execve messages with lots of tiny (1-2 byte)
arguments could still cause records greater than 8k to be emitted. Simply
fix the estimate.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
When an audit watch is added to a parent the temporary watch inside the
original krule from userspace is freed. Yet the original watch is used after
the real watch was created in audit_add_rules()
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
We don't need to add usage counts for swcounter and attr usage
models for inherited counters since the parent counter will
always have one, which suffices to generate the needed output.
This avoids up to 3 global atomic increments per inherited
counter.
LKML-Reference: <new-submission>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Teach perf_counter_alloc() about inheritance so that we can
optimize the inherit path in the next patch.
Remove the child_counter->atrr.inherit = 1 line because the
only way to get there is if parent_counter->attr.inherit == 1
and we copy the attrs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Similar to tracepoints, use an enable variable to reduce
overhead when unused.
Only look for a counter of a particular event type when we know
there is at least one in the system.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Poornima Nayek reported:
| Timer migration interface /proc/sys/kernel/timer_migration in
| 2.6.30-git9 accepts any numerical value as input.
|
| Steps to reproduce:
| 1. echo -6666666 > /proc/sys/kernel/timer_migration
| 2. cat /proc/sys/kernel/timer_migration
| -6666666
|
| 1. echo 44444444444444444444444444444444444444444444444444444444444 > /proc/sys/kernel/timer_migration
| 2. cat /proc/sys/kernel/timer_migration
| -1357789412
|
| Expected behavior: Should 'echo: write error: Invalid argument' while
| setting any value other then 0 & 1
Restrict valid values to 0 and 1.
Reported-by: Poornima Nayak <mpnayak@linux.vnet.ibm.com>
Tested-by: Poornima Nayak <mpnayak@linux.vnet.ibm.com>
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Cc: poornima nayak <mpnayak@linux.vnet.ibm.com>
Cc: Arun Bharadwaj <arun@linux.vnet.ibm.com>
LKML-Reference: <20090623043058.GA3249@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
