aboutsummaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2008-10-16wait: kill is_sync_wait()Tejun Heo
is_sync_wait() is used to distinguish between sync and async waits. Basically sync waits are the ones initialized with init_waitqueue_entry() and async ones with init_waitqueue_func_entry(). The sync/async distinction is used only in prepare_to_wait[_exclusive]() and its only function is to skip setting the current task state if the wait is async. This has a few problems. * No one uses it. None of func_entry users use prepare_to_wait() functions, so the code path never gets executed. * The distinction is bogus. Maybe back when func_entry is used only by aio but it's now also used by epoll and in future possibly by 9p and poll/select. * Taking @state as argument and ignoring it silenly depending on how @wait is initialized is just a bad error-prone API. * It prevents func_entry waits from using wait->private for no good reason. This patch kills is_sync_wait() and the associated code paths from prepare_to_wait[_exclusive](). As there was no user of these code paths, this patch doesn't cause any behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16kernel/dma.c: remove a CVS keywordAdrian Bunk
Remove a CVS keyword that wasn't updated for a long time from a comment. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16pm: rework disabling of user mode helpers during suspend/hibernationRafael J. Wysocki
We currently use a PM notifier to disable user mode helpers before suspend and hibernation and to re-enable them during resume. However, this is not an ideal solution, because if any drivers want to upload firmware into memory before suspend, they have to use a PM notifier for this purpose and there is no guarantee that the ordering of PM notifiers will be as expected (ie. the notifier that disables user mode helpers has to be run after the driver's notifier used for uploading the firmware). For this reason, it seems better to move the disabling and enabling of user mode helpers to separate functions that will be called by the PM core as necessary. [akpm@linux-foundation.org: remove unneeded ifdefs] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16memrlimit: cgroup mm owner callback changes to add task infoBalbir Singh
This patch adds an additional field to the mm_owner callbacks. This field is required to get to the mm that changed. Hold mmap_sem in write mode before calling the mm_owner_changed callback [hugh@veritas.com: fix mmap_sem deadlock] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16driver core: basic infrastructure for per-module dynamic debug messagesJason Baron
Base infrastructure to enable per-module debug messages. I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes control of debugging statements on a per-module basis in one /proc file, currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG, is not set, debugging statements can still be enabled as before, often by defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set. The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls can be dynamically enabled/disabled on a per-module basis. Future plans include extending this functionality to subsystems, that define their own debug levels and flags. Usage: Dynamic debugging is controlled by the debugfs file, <debugfs>/dynamic_printk/modules. This file contains a list of the modules that can be enabled. The format of the file is as follows: <module_name> <enabled=0/1> . . . <module_name> : Name of the module in which the debug call resides <enabled=0/1> : whether the messages are enabled or not For example: snd_hda_intel enabled=0 fixup enabled=1 driver enabled=0 Enable a module: $echo "set enabled=1 <module_name>" > dynamic_printk/modules Disable a module: $echo "set enabled=0 <module_name>" > dynamic_printk/modules Enable all modules: $echo "set enabled=1 all" > dynamic_printk/modules Disable all modules: $echo "set enabled=0 all" > dynamic_printk/modules Finally, passing "dynamic_printk" at the command line enables debugging for all modules. This mode can be turned off via the above disable command. [gkh: minor cleanups and tweaks to make the build work quietly] Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16modules: fix module "notes" kobject leakAlexey Dobriyan
Fix "notes" kobject leak It happens every rmmod if KALLSYMS=y and SYSFS=y. # modprobe foo kobject: 'foo' (ffffffffa00743d0): kobject_add_internal: parent: 'module', set: 'module' kobject: 'holders' (ffff88017e7c5770): kobject_add_internal: parent: 'foo', set: '<NULL>' kobject: 'foo' (ffffffffa00743d0): kobject_uevent_env kobject: 'foo' (ffffffffa00743d0): fill_kobj_path: path = '/module/foo' kobject: 'notes' (ffff88017fa9b668): kobject_add_internal: parent: 'foo', set: '<NULL>' ^^^^^ # rmmod foo kobject: 'holders' (ffff88017e7c5770): kobject_cleanup kobject: 'holders' (ffff88017e7c5770): auto cleanup kobject_del kobject: 'holders' (ffff88017e7c5770): calling ktype release kobject: (ffff88017e7c5770): dynamic_kobj_release kobject: 'holders': free name kobject: 'foo' (ffffffffa00743d0): kobject_cleanup kobject: 'foo' (ffffffffa00743d0): does not have a release() function, it is broken and must be fixed. kobject: 'foo' (ffffffffa00743d0): auto cleanup 'remove' event kobject: 'foo' (ffffffffa00743d0): kobject_uevent_env kobject: 'foo' (ffffffffa00743d0): fill_kobj_path: path = '/module/foo' kobject: 'foo' (ffffffffa00743d0): auto cleanup kobject_del kobject: 'foo': free name [whooops] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17module: remove CONFIG_KMOD in comment after #endifRusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-16genirq: fix name space collision of nr_irqs in autoprobe.cThomas Gleixner
probe_irq_off() is disfunctional as the local nr_irqs is referenced instead of the global one for the for_each_irq_desc() iterator. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: use iterators for irq_desc loopsThomas Gleixner
Use for_each_irq_desc[_reverse] for all the iteration loops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: cleanup the sparseirq modificationsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: revert dynarrayThomas Gleixner
Revert the dynarray changes. They need more thought and polishing. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: remove irq_to_desc_allocThomas Gleixner
Remove the leftover of sparseirqs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: remove sparse irq codeThomas Gleixner
This code is not ready, but we need to rip it out instead of rebasing as we would lose the APIC/IO_APIC unification otherwise. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: use inline function for irq_to_descThomas Gleixner
For the non sparse irq case an inline function is perfectly fine. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16x86: fix typo in irq_desc arrayYinghai Lu
when SPARSE_IRQ is not used, should still use irq_desc->lock Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16fix warning: "x86: sparse_irq needs spin_lock in allocations"Andrew Morton
caused by commit a532e19680ada3b8579b81e67e76d3ebd19c340f Author: Yinghai Lu <yhlu.kernel@gmail.com> Date: Wed Aug 20 20:46:25 2008 -0700 x86: sparse_irq needs spin_lock in allocations Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16sparseirq: remove some debug print outYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: fix irqpoll && sparseirqYinghai Lu
Steven Noonan reported a boot hang when using irqpoll and CONFIG_HAVE_SPARSE_IRQ=y. The irqpoll loop needs to be updated to not iterate from 1 to nr_irqs but to iterate via for_each_irq_desc(). (in the former case desc can be NULL which crashes the box) Reported-by: Steven Noonan <steven@uplinklabs.net> Tested-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: HPET_MSI change IRQ affinity in process context when it is disabledvenkatesh.pallipadi@intel.com
Change the IRQ affinity in the process context when the IRQ is disabled. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: set_irq_chip() has redundant call to irq_to_desc()Dean Nelson
Extraneous call to irq_to_desc(). Signed-off-by: Dean Nelson <dcn@sgi.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16sparseirq: move kstat_irqs from kstat to irq_desc - fixYinghai Lu
fix non-sparseirq architectures. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: sparse_irq needs spin_lock in allocationsYinghai Lu
Suresh Siddha noticed that we should have a spinlock around it. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16sparseirq: fix lockdepIngo Molnar
-tip testing found this lockdep splat: [ 0.000000] Initializing CPU#0 [ 0.000000] found new irq_desc for irq 0 [ 0.000000] INFO: trying to register non-static key. [ 0.000000] the code is fine but needs lockdep annotation. [ 0.000000] turning off the locking correctness validator. [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-tip-00191-g98ccb89-dirty #1 [ 0.000000] [<c0153c22>] register_lock_class+0x3d2/0x400 [ 0.000000] [<c0104d87>] ? mcount_call+0x5/0xa [ 0.000000] [<c0154f3a>] __lock_acquire+0x22a/0x5d0 [ 0.000000] [<c0104d87>] ? mcount_call+0x5/0xa [ 0.000000] [<c0155351>] lock_acquire+0x71/0xa0 [ 0.000000] [<c016d61f>] ? set_irq_chip+0x3f/0x90 [ 0.000000] [<c070f148>] _spin_lock_irqsave+0x58/0x90 [ 0.000000] [<c016d61f>] ? set_irq_chip+0x3f/0x90 [ 0.000000] [<c016d61f>] set_irq_chip+0x3f/0x90 [ 0.000000] [<c016d7e0>] ? handle_level_irq+0x0/0xe0 [ 0.000000] [<c016da1a>] set_irq_chip_and_handler_name+0x1a/0x40 [ 0.000000] [<c0a396c1>] init_ISA_irqs+0x51/0xa0 [ 0.000000] [<c0a4a365>] pre_intr_init_hook+0x25/0x30 [ 0.000000] [<c0a39723>] native_init_IRQ+0x13/0x370 [ 0.000000] [<c015569c>] ? lock_release+0xcc/0x1d0 [ 0.000000] [<c0104d87>] ? mcount_call+0x5/0xa [ 0.000000] [<c070dc22>] ? __mutex_unlock_slowpath+0x92/0x110 [ 0.000000] [<c070dcad>] ? mutex_unlock+0xd/0x10 [ 0.000000] [<c0135f62>] ? cpu_maps_update_done+0x12/0x20 [ 0.000000] [<c06c6743>] ? register_cpu_notifier+0x23/0x30 [ 0.000000] [<c011e8ae>] init_IRQ+0xe/0x10 [ 0.000000] [<c0a357a5>] start_kernel+0x1c5/0x340 [ 0.000000] [<c0a35280>] ? unknown_bootoption+0x0/0x210 [ 0.000000] [<c0a3506b>] i386_start_kernel+0x6b/0x80 [ 0.000000] ======================= [ 0.000000] found new irq_desc for irq 1 [ 0.000000] found new irq_desc for irq 2 [ 0.000000] found new irq_desc for irq 3 this: static void init_one_irq_desc(struct irq_desc *desc) { memcpy(desc, &irq_desc_init, sizeof(struct irq_desc)); #ifdef CONFIG_TRACE_IRQFLAGS lockdep_set_class(&desc->lock, &irq_desc_lock_class); #endif } should be unconditional. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: remove irqbalance in kernel for 32 bitYinghai Lu
This has been deprecated for years, the user space irqbalanced utility works better with numa, has configurable policies, etc... Signed-off-by: Yinghai Lu <yhlu.kernel@gmai.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: separate sparse_irqs from sparse_irqs_freeYinghai Lu
so later don't need compare with -1U Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86_64: rename irq_desc/irq_desc_allocYinghai Lu
change names: irq_desc() ==> irq_desc_alloc __irq_desc() ==> irq_desc Also split a few of the uses in lowlevel x86 code. v2: need to check if desc is null in smp_irq_move_cleanup Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: add irq_desc in function in parameterYinghai Lu
So we could remove some duplicated calling to irq_desc v2: make sure irq_desc in init/main.c is not used without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: remove >= nr_irqs checking with config_have_sparse_irqYinghai Lu
remove irq limit checks - nr_irqs is dynamic and we expand anytime. v2: fix checking about result irq_cfg_without_new, so could use msi again v3: use irq_desc_without_new to check irq is valid Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: replace loop with nr_irqs with for_each_irq_descYinghai Lu
There are a handful of loops that go from 0 to nr_irqs and use get_irq_desc() on them. These would allocate all the irq_desc entries, regardless of the need for them. Use the smarter for_each_irq_desc() iterator that will only iterate over the present ones. v2: make sure arch without GENERIC_HARDIRQS work too Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: add irq_desc_without_newYinghai Lu
add an irq_desc accessor that will not allocate any sparse entry but returns failure if there's no entry present. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: move kstat_irqs from kstat to irq_descYinghai Lu
based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: sparse irqs, fix IRQ auto-probe crashIngo Molnar
fix: [ 10.631533] calling yenta_socket_init+0x0/0x20 [ 10.631533] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012] [ 10.631533] Yenta: Using INTVAL to route CSC interrupts to PCI [ 10.631533] Yenta: Routing CardBus interrupts to PCI [ 10.631533] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64 [ 10.731599] BUG: unable to handle kernel NULL pointer dereference at 00000040 [ 10.731838] IP: [<c0c95b5f>] _spin_lock_irq+0xf/0x20 [ 10.732221] *pde = 00000000 [ 10.732741] Oops: 0002 [#1] SMP [ 10.733453] [ 10.734253] Pid: 1, comm: swapper Tainted: G W (2.6.27-rc3-tip-00173-gd7eaa4f-dirty #1) [ 10.735188] EIP: 0060:[<c0c95b5f>] EFLAGS: 00010002 CPU: 0 [ 10.735523] EIP is at _spin_lock_irq+0xf/0x20 [ 10.735523] EAX: 00000040 EBX: 00000000 ECX: f6e04c90 EDX: 00000100 [ 10.735523] ESI: 000000df EDI: f6e04c90 EBP: f7867df0 ESP: f7867df0 [ 10.735523] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 10.735523] Process swapper (pid: 1, ti=f7867000 task=f7870000 task.ti=f7867000) [ 10.735523] Stack: f7867e04 c0155fbd 00000000 00000000 f6e04c90 f7867e5c c0c6e319 c0f6a074 [ 10.735523] f6e04c90 000017aa 00002012 c112b648 f791f240 c112b5e0 f7867e44 c010440b [ 10.735523] f791f240 f791f29c c112b8ec f791f240 00000000 f7867e5c c048f893 03c0b648 [ 10.735523] Call Trace: [ 10.735523] [<c0155fbd>] ? probe_irq_on+0x3d/0x140 [ 10.735523] [<c0c6e319>] ? yenta_probe+0x529/0x640 [ 10.735523] [<c010440b>] ? mcount_call+0x5/0xa [ 10.735523] [<c048f893>] ? pci_match_device+0xa3/0xb0 [ 10.735523] [<c048fc1e>] ? pci_device_probe+0x5e/0x80 [ 10.735523] [<c0515423>] ? driver_probe_device+0x83/0x180 [ 10.735523] [<c0515594>] ? __driver_attach+0x74/0x80 [ 10.735523] [<c0514b69>] ? bus_for_each_dev+0x49/0x70 [ 10.735523] [<c051528e>] ? driver_attach+0x1e/0x20 [ 10.735523] [<c0515520>] ? __driver_attach+0x0/0x80 [ 10.735523] [<c05150d3>] ? bus_add_driver+0x1a3/0x220 [ 10.735523] [<c048fb60>] ? pci_device_remove+0x0/0x40 [ 10.735523] [<c05157f4>] ? driver_register+0x54/0x130 [ 10.735523] [<c048fe2f>] ? __pci_register_driver+0x4f/0x90 [ 10.735523] [<c11e9419>] ? yenta_socket_init+0x19/0x20 [ 10.735523] [<c0101125>] ? do_one_initcall+0x35/0x160 [ 10.735523] [<c11e9400>] ? yenta_socket_init+0x0/0x20 [ 10.735523] [<c01391a6>] ? __queue_work+0x36/0x50 [ 10.735523] [<c013922d>] ? queue_work_on+0x3d/0x50 [ 10.735523] [<c11a2758>] ? kernel_init+0x148/0x210 [ 10.735523] [<c11a2610>] ? kernel_init+0x0/0x210 [ 10.735523] [<c01043f3>] ? kernel_thread_helper+0x7/0x10 [ 10.735523] ======================= [ 10.735523] Code: 10 38 f2 74 06 f3 90 8a 10 eb f6 5d 89 c8 c3 8d b6 00 00 00 00 8d bc 27 00 00 00 00 55 89 e5 e8 a4 e8 46 ff fa ba 00 01 00 00 90 <66> 0f c1 10 38 f2 74 06 f3 90 8a 10 eb f6 5d c3 90 55 89 e5 53 as auto-probing wants to iterate over existing irqs. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: sparse irqs: use irq_desc() together with dyn_array, instead of ↵Yinghai Lu
irq_desc[] add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: make irqs in kernel stat use per_cpu_dyn_arrayYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: sparse irqs, export nr_irqsIngo Molnar
fix: Building modules, stage 2. MODPOST 458 modules ERROR: "nr_irqs" [drivers/serial/8250.ko] undefined! Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: make irq_desc to use dyn_arrayYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: introduce nr_irqsYinghai Lu
at this point nr_irqs is equal NR_IRQS convert a few easy users from NR_IRQS to dynamic nr_irqs. v2: according to Eric, we need to take care of arch without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16Merge branch 'linus' into genirqIngo Molnar
2008-10-15Merge branches 'core/softlockup', 'core/softirq', 'core/resources', ↵Ingo Molnar
'core/printk' and 'core/misc' into core-v28-for-linus
2008-10-14Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: (59 commits) svcrdma: Fix IRD/ORD polarity svcrdma: Update svc_rdma_send_error to use DMA LKEY svcrdma: Modify the RPC reply path to use FRMR when available svcrdma: Modify the RPC recv path to use FRMR when available svcrdma: Add support to svc_rdma_send to handle chained WR svcrdma: Modify post recv path to use local dma key svcrdma: Add a service to register a Fast Reg MR with the device svcrdma: Query device for Fast Reg support during connection setup svcrdma: Add FRMR get/put services NLM: Remove unused argument from svc_addsock() function NLM: Remove "proto" argument from lockd_up() NLM: Always start both UDP and TCP listeners lockd: Remove unused fields in the nlm_reboot structure lockd: Add helper to sanity check incoming NOTIFY requests lockd: change nlmclnt_grant() to take a "struct sockaddr *" lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addresses lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INET lockd: Support non-AF_INET addresses in nlm_lookup_host() NLM: Convert nlm_lookup_host() to use a single argument svcrdma: Add Fast Reg MR Data Types ...
2008-10-14tracing/fastboot: improve help textIngo Molnar
Improve the help text of the boot tracer. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/stacktrace: improve help textIngo Molnar
Improve the help text that is displayed for CONFIG_STACK_TRACER. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14trace: add build-time check to avoid overrunning hex bufferHarvey Harrison
Remove the runtime BUG_ON and change to a compile-time check in the macro that calls the hex format routine [Noticed by Joe Perches] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: fix hex output mode of ftraceHarvey Harrison
Fix the output of ftrace in hex mode as the hi/lo nibbles are output in reverse order. Without this patch, the output of ftrace is: raw mode : 6474 0 141531612444 0 140 + 6402 120 S hex mode : 000091a4 00000000 000000023f1f50c1 00000000 c8 000000b2 00009120 87 ffff00c8 00000035 There is an inversion on ouput hex(6474) is 194a [based on a patch by Philippe Reynes <tremyfr@yahoo.fr>] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/fastboot: fix printk format typo in boot tracerArjan van de Ven
When printing nanoseconds, the right printk format string is %09 not %06... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Frédéric Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: return an error when setting a nonexistent tracerFrederic Weisbecker
When one try to set a nonexistent tracer, no error is returned as if the name of the tracer was correct. We should return -EINVAL. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make some tracers reentrantSteven Rostedt
Now that the ring buffer is reentrant, some of the ftrace tracers (sched_swich, debugging traces) can also be reentrant. Note: Never make the function tracer reentrant, that can cause recursion problems all over the kernel. The function tracer must disable reentrancy. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring-buffer: make reentrantSteven Rostedt
This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ring-buffer: move page indexes into page headersSteven Rostedt
Remove the global head and tail indexes and move them into the page header. Each page will now keep track of where the last write and read was made. We also rename the head and tail to read and write for better clarification. This patch is needed for future enhancements to move the ring buffer to a lockless solution. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/fastboot: only trace non-module initcallsFrederic Weisbecker
At this time, only built-in initcalls interest us. We can't really produce a relevant graph if we include the modules initcall too. I had good results after this patch (see svg in attachment). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>