aboutsummaryrefslogtreecommitdiff
path: root/mm/slub.c
AgeCommit message (Collapse)Author
2008-07-15slub: current is always validAlexey Dobriyan
Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-07-15slub: Add check for kfree() of non slab objects.Christoph Lameter
We can detect kfree()s on non slab objects by checking for PageCompound(). Works in the same way as for ksize. This helped me catch an invalid kfree(). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-07-14Start using the new '%pS' infrastructure to print symbolsLinus Torvalds
This simplifies the code significantly, and was the whole point of the exercise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-10slub: Fix use-after-preempt of per-CPU data structureDmitry Adamushko
Vegard Nossum reported a crash in kmem_cache_alloc(): BUG: unable to handle kernel paging request at da87d000 IP: [<c01991c7>] kmem_cache_alloc+0xc7/0xe0 *pde = 28180163 *pte = 1a87d160 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC Pid: 3850, comm: grep Not tainted (2.6.26-rc9-00059-gb190333 #5) EIP: 0060:[<c01991c7>] EFLAGS: 00210203 CPU: 0 EIP is at kmem_cache_alloc+0xc7/0xe0 EAX: 00000000 EBX: da87c100 ECX: 1adad71a EDX: 6b6b6b6b ESI: 00200282 EDI: da87d000 EBP: f60bfe74 ESP: f60bfe54 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 and analyzed it: "The register %ecx looks innocent but is very important here. The disassembly: mov %edx,%ecx shr $0x2,%ecx rep stos %eax,%es:(%edi) <-- the fault So %ecx has been loaded from %edx... which is 0x6b6b6b6b/POISON_FREE. (0x6b6b6b6b >> 2 == 0x1adadada.) %ecx is the counter for the memset, from here: memset(object, 0, c->objsize); i.e. %ecx was loaded from c->objsize, so "c" must have been freed. Where did "c" come from? Uh-oh... c = get_cpu_slab(s, smp_processor_id()); This looks like it has very much to do with CPU hotplug/unplug. Is there a race between SLUB/hotplug since the CPU slab is used after it has been freed?" Good analysis. Yeah, it's possible that a caller of kmem_cache_alloc() -> slab_alloc() can be migrated on another CPU right after local_irq_restore() and before memset(). The inital cpu can become offline in the mean time (or a migration is a consequence of the CPU going offline) so its 'kmem_cache_cpu' structure gets freed ( slab_cpuup_callback). At some point of time the caller continues on another CPU having an obsolete pointer... Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04Christoph has movedChristoph Lameter
Remove all clameter@sgi.com addresses from the kernel tree since they will become invalid on June 27th. Change my maintainer email address for the slab allocators to cl@linux-foundation.org (which will be the new email address for the future). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-03slub: Do not use 192 byte sized cache if minimum alignment is 128 byteChristoph Lameter
The 192 byte cache is not necessary if we have a basic alignment of 128 byte. If it would be used then the 192 would be aligned to the next 128 byte boundary which would result in another 256 byte cache. Two 256 kmalloc caches cause sysfs to complain about a duplicate entry. MIPS needs 128 byte aligned kmalloc caches and spits out warnings on boot without this patch. Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-05-22slub: ksize() abuse checksPekka Enberg
Add a WARN_ON for pages that don't have PageSlab nor PageCompound set to catch the worst abusers of ksize() in the kernel. Acked-by: Christoph Lameter <clameter@sgi.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-05-08slub: fix atomic usage in any_slab_objects()Benjamin Herrenschmidt
any_slab_objects() does an atomic_read on an atomic_long_t, this fixes it to use atomic_long_read instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-02slub: #ifdef simplificationChristoph Lameter
If we make SLUB_DEBUG depend on SYSFS then we can simplify some #ifdefs and avoid others. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-05-02slub: Whitespace cleanup and use of strict_strtoulChristoph Lameter
Fix some issues with wrapping and use strict_strtoul to make parameter passing from sysfs safer. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-05-01remove div_long_long_remRoman Zippel
x86 is the only arch right now, which provides an optimized for div_long_long_rem and it has the downside that one has to be very careful that the divide doesn't overflow. The API is a little akward, as the arguments for the unsigned divide are signed. The signed version also doesn't handle a negative divisor and produces worse code on 64bit archs. There is little incentive to keep this API alive, so this converts the few users to the new API. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30infrastructure to debug (dynamic) objectsThomas Gleixner
We can see an ever repeating problem pattern with objects of any kind in the kernel: 1) freeing of active objects 2) reinitialization of active objects Both problems can be hard to debug because the crash happens at a point where we have no chance to decode the root cause anymore. One problem spot are kernel timers, where the detection of the problem often happens in interrupt context and usually causes the machine to panic. While working on a timer related bug report I had to hack specialized code into the timer subsystem to get a reasonable hint for the root cause. This debug hack was fine for temporary use, but far from a mergeable solution due to the intrusiveness into the timer code. The code further lacked the ability to detect and report the root cause instantly and keep the system operational. Keeping the system operational is important to get hold of the debug information without special debugging aids like serial consoles and special knowledge of the bug reporter. The problems described above are not restricted to timers, but timers tend to expose it usually in a full system crash. Other objects are less explosive, but the symptoms caused by such mistakes can be even harder to debug. Instead of creating specialized debugging code for the timer subsystem a generic infrastructure is created which allows developers to verify their code and provides an easy to enable debug facility for users in case of trouble. The debugobjects core code keeps track of operations on static and dynamic objects by inserting them into a hashed list and sanity checking them on object operations and provides additional checks whenever kernel memory is freed. The tracked object operations are: - initializing an object - adding an object to a subsystem list - deleting an object from a subsystem list Each operation is sanity checked before the operation is executed and the subsystem specific code can provide a fixup function which allows to prevent the damage of the operation. When the sanity check triggers a warning message and a stack trace is printed. The list of operations can be extended if the need arises. For now it's limited to the requirements of the first user (timers). The core code enqueues the objects into hash buckets. The hash index is generated from the address of the object to simplify the lookup for the check on kfree/vfree. Each bucket has it's own spinlock to avoid contention on a global lock. The debug code can be compiled in without being active. The runtime overhead is minimal and could be optimized by asm alternatives. A kernel command line option enables the debugging code. Thanks to Ingo Molnar for review, suggestions and cleanup patches. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29ipc: define the slab_memory_callback priority as a constantNadia Derbey
This is a trivial patch that defines the priority of slab_memory_callback in the callback chain as a constant. This is to prepare for next patch in the series. Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: pack objects denser slub: Calculate min_objects based on number of processors. slub: Drop DEFAULT_MAX_ORDER / DEFAULT_MIN_OBJECTS slub: Simplify any_slab_object checks slub: Make the order configurable for each slab cache slub: Drop fallback to page allocator method slub: Fallback to minimal order during slab page allocation slub: Update statistics handling for variable order slabs slub: Add kmem_cache_order_objects struct slub: for_each_object must be passed the number of objects in a slab slub: Store max number of objects in the page struct. slub: Dump list of objects not freed on kmem_cache_close() slub: free_list() cleanup slub: improve kmem_cache_destroy() error message slob: fix bug - when slob allocates "struct kmem_cache", it does not force alignment.
2008-04-28mm: move cache_line_size() to <linux/cache.h>Pekka Enberg
Not all architectures define cache_line_size() so as suggested by Andrew move the private implementations in mm/slab.c and mm/slob.c to <linux/cache.h>. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28mm: have zonelist contains structs with both a zone pointer and zone_idxMel Gorman
Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28mm: use two zonelist that are filtered by GFP maskMel Gorman
Currently a node has two sets of zonelists, one for each zone type in the system and a second set for GFP_THISNODE allocations. Based on the zones allowed by a gfp mask, one of these zonelists is selected. All of these zonelists consume memory and occupy cache lines. This patch replaces the multiple zonelists per-node with two zonelists. The first contains all populated zones in the system, ordered by distance, for fallback allocations when the target/preferred node has no free pages. The second contains all populated zones in the node suitable for GFP_THISNODE allocations. An iterator macro is introduced called for_each_zone_zonelist() that interates through each zone allowed by the GFP flags in the selected zonelist. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28mm: introduce node_zonelist() for accessing the zonelist for a GFP maskMel Gorman
Introduce a node_zonelist() helper function. It is used to lookup the appropriate zonelist given a node and a GFP mask. The patch on its own is a cleanup but it helps clarify parts of the two-zonelist-per-node patchset. If necessary, it can be merged with the next patch in this set without problems. Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-27slub: pack objects denserChristoph Lameter
Since we now have more orders available use a denser packing. Increase slab order if more than 1/16th of a slab would be wasted. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Calculate min_objects based on number of processors.Christoph Lameter
The mininum objects per slab is calculated based on the number of processors that may come online. Processors min_objects --------------------------- 1 8 2 12 4 16 8 20 16 24 32 28 64 32 1024 48 4096 56 The higher the number of processors the large the order sizes used for various slab caches will become. This has been shown to address the performance issues in hackbench on 16p etc. The calculation is only performed if slub_min_objects is zero (default). If one specifies a slub_min_objects on boot then that setting is taken. As suggested by Zhang Yanmin's performance tests on 16-core Tigerton, use the formula '4 * (fls(nr_cpu_ids) + 1)': ./hackbench 100 process 2000: 1) 2.6.25-rc6slab: 23.5 seconds 2) 2.6.25-rc7SLUB+slub_min_objects=20: 31 seconds 3) 2.6.25-rc7SLUB+slub_min_objects=24: 23.5 seconds Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Drop DEFAULT_MAX_ORDER / DEFAULT_MIN_OBJECTSChristoph Lameter
We can now fallback to order 0 slabs. So set the slub_max_order to PAGE_CACHE_ORDER_COSTLY but keep the slub_min_objects at 4. This will mostly preserve the orders used in 2.6.25. F.e. The 2k kmalloc slab will use order 1 allocs and the 4k kmalloc slab order 2. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Simplify any_slab_object checksChristoph Lameter
Since we now have total_objects counter per node use that to check for the presence of any objects. The loop over all cpu slabs is not that useful since any cpu slab would require an object allocation first. So drop that. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Make the order configurable for each slab cacheChristoph Lameter
Makes /sys/kernel/slab/<slabname>/order writable. The allocation order of a slab cache can then be changed dynamically during runtime. This can be used to override the objects per slabs value establisheed with the slub_min_objects setting that was manually specified or calculated on bootup. The changes of the slab order can occur while allocate_slab() runs. Allocate slab needs the order and the number of slab objects that are both changed by the change of order. Both are put into a single word (struct kmem_cache_order_objects). They can then be atomically updated and retrieved. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Drop fallback to page allocator methodChristoph Lameter
There is now a generic method of falling back to a slab page of minimal order. No need anymore for the fallback to kmalloc_large(). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Fallback to minimal order during slab page allocationChristoph Lameter
If any higher order allocation fails then fall back the smallest order necessary to contain at least one object. This enables fallback for all allocations to order 0 pages. The fallback will waste more memory (objects will not fit neatly) and the fallback slabs will be not as efficient as larger slabs since they contain less objects. Note that SLAB also depends on order 1 allocations for some slabs that waste too much memory if forced into PAGE_SIZE'd page. SLUB now can now deal with failing order 1 allocs which SLAB cannot do. Add a new field min that will contain the objects for the smallest possible order for a slab cache. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Update statistics handling for variable order slabsChristoph Lameter
Change the statistics to consider that slabs of the same slabcache can have different number of objects in them since they may be of different order. Provide a new sysfs field total_objects which shows the total objects that the allocated slabs of a slabcache could hold. Add a max field that holds the largest slab order that was ever used for a slab cache. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Add kmem_cache_order_objects structChristoph Lameter
Pack the order and the number of objects into a single word. This saves some memory in the kmem_cache_structure and more importantly allows us to fetch both values atomically. Later the slab orders become runtime configurable and we need to fetch these two items together in order to properly allocate a slab and initialize its objects. Fix the race by fetching the order and the number of objects in one word. [penberg@cs.helsinki.fi: fix memset() page order in new_slab()] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: for_each_object must be passed the number of objects in a slabChristoph Lameter
Pass the number of objects to the for_each_object macro. Most of these are debug related. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Store max number of objects in the page struct.Christoph Lameter
Split the inuse field up to be able to store the number of objects in this page in the page struct as well. Necessary if we want to have pages of various orders for a slab. Also avoids touching struct kmem_cache cachelines in __slab_alloc(). Update diagnostic code to check the number of objects and make sure that the number of objects always stays within the bounds of a 16 bit unsigned integer. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: Dump list of objects not freed on kmem_cache_close()Christoph Lameter
Dump a list of unfreed objects if a slab cache is closed but objects still remain. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: free_list() cleanupChristoph Lameter
free_list looked a bit screwy so here is an attempt to clean it up. free_list is is only used for freeing partial lists. We do not need to return a parameter if we decrement nr_partial within the function which allows a simplification of the whole thing. The current version modifies nr_partial outside of the list_lock which is technically not correct. It was only ok because we should be the only user of this slab cache at this point. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-27slub: improve kmem_cache_destroy() error messagePekka Enberg
As pointed out by Ingo, the SLUB warning of calling kmem_cache_destroy() with cache that still has objects triggers in practice. So turn this WARN_ON() into a nice SLUB specific error message to avoid people confusing it to a SLUB bug. Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-23slab_err: Pass parameters correctly to slab_bugChristoph Lameter
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-14slub: No need for per node slab counters if !SLUB_DEBUGChristoph Lameter
The per node counters are used mainly for showing data through the sysfs API. If that API is not compiled in then there is no point in keeping track of this data. Disable counters for the number of slabs and the number of total slabs if !SLUB_DEBUG. Incrementing the per node counters is also accessing a potentially contended cacheline so this could actually be a performance benefit to embedded systems. SLABINFO support is also affected. It now must depends on SLUB_DEBUG (which is on by default). Patch also avoids a check for a NULL kmem_cache_node pointer in new_slab() if the system is not compiled with NUMA support. [penberg@cs.helsinki.fi: fix oops and move ->nr_slabs into CONFIG_SLUB_DEBUG] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14slub: Move map/flag clearing to __free_slabChristoph Lameter
__free_slab does some diagnostics. The resetting of mapcount etc in discard_slab() can interfere with debug processing. So move the reset immediately before the page is freed. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14slub: Fixes to per cpu stat output in sysfsChristoph Lameter
Only output per cpu stats if the kernel is build for SMP. Use a capital "C" as a leading character for the processor number (same as the numa statistics that also use a capital letter "N"). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14slub: Deal with config variable dependenciesChristoph Lameter
count_partial() is used by both slabinfo and the sysfs proc support. Move the function directly before the beginning of the sysfs code so that it can be easily found. Rework the preprocessor conditional to take into account that slub sysfs support depends on CONFIG_SYSFS *and* CONFIG_SLUB_DEBUG. Make CONFIG_SLUB_STATS depend on CONFIG_SLUB_DEBUG and CONFIG_SYSFS. There is no point of keeping statistics if no one can restrive them. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14slub: Reduce #ifdef ZONE_DMA by moving kmalloc_caches_dma near dma logicChristoph Lameter
Move the definition of kmalloc_caches_dma() into a later #ifdef CONFIG_ZONE_DMA. This saves one #ifdef and leaves us with a total of two #ifdefs for dma slab support. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14slub: Initialize per-cpu statsPekka Enberg
As spotted by kmemcheck, we need to initialize the per-CPU ->stat array before using it. [kmem_cache_cpu structures are usually allocated from arrays defined via DEFINE_PER_CPU that are zeroed so we have not noticed this so far --cl]. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-01Fix undefined count_partial if !CONFIG_SLABINFOChristoph Lameter
Small typo in the patch recently merged to avoid the unused symbol message for count_partial(). Discussion thread with confirmation of fix at http://marc.info/?t=120696854400001&r=1&w=2 Typo in the check if we need the count_partial function that was introduced by 53625b4204753b904addd40ca96d9ba802e6977d Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-27Revert "SLUB: remove useless masking of GFP_ZERO"Linus Torvalds
This reverts commit 3811dbf67162bd08412f1b0e02e554f353e93bdb. The masking was not at all useless, and it was sensible. We handle GFP_ZERO in the caller, and passing it down to any page allocator logic is buggy and wrong. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26count_partial() is not used if !SLUB_DEBUG and !CONFIG_SLABINFOChristoph Lameter
Avoid warnings about unused functions if neither SLUB_DEBUG nor CONFIG_SLABINFO is defined. This patch will be reversed when slab defrag is merged since slab defrag requires count_partial() to determine the fragmentation status of slab caches. Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-17slub page alloc fallback: Enable interrupts for GFP_WAIT.Christoph Lameter
The fallback path needs to enable interrupts like done for the other page allocator calls. This was not necessary with the alternate fast path since we handled irq enable/disable in the slow path. The regular fastpath handles irq enable/disable around calls to the slow path so we need to restore the proper status before calling the page allocator from the slowpath. Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-06slub: Do not cross cacheline boundaries for very small objectsNick Piggin
SLUB should pack even small objects nicely into cachelines if that is what has been asked for. Use the same algorithm as SLAB for this. The effect of this patch for a system with a cacheline size of 64 bytes is that the 24 byte sized slab caches will now put exactly 2 objects into a cacheline instead of 3 with some overlap into the next cacheline. This reduces the object density in a 4k slab from 170 to 128 objects (same as SLAB). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-06slub statistics: Fix check for DEACTIVATE_REMOTE_FREESChristoph Lameter
The remote frees are in the freelist of the page and not in the percpu freelist. Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03slub: fix possible NULL pointer dereferenceCyrill Gorcunov
This patch fix possible NULL pointer dereference if kzalloc failed. To be able to return proper error code the function return type is changed to ssize_t (according to callees and sysfs definitions). Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03slub: Add kmalloc_large_node() to support kmalloc_node fallbackChristoph Lameter
Slub is missing some NUMA support for large kmallocs. Provide that. Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03slub: look up object from the freelist oncePekka J Enberg
We only need to look up object from c->page->freelist once in __slab_alloc(). Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03slub: Fix up commentsChristoph Lameter
Provide comments and fix up various spelling / style issues. Signed-off-by: Christoph Lameter <clameter@sgi.com>
2008-03-03slub: Rearrange #ifdef CONFIG_SLUB_DEBUG in calculate_sizes()Christoph Lameter
Group SLUB_DEBUG code together to reduce the number of #ifdefs. Move some debug checks under the #ifdef. Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com>