aboutsummaryrefslogtreecommitdiff
path: root/net/8021q
AgeCommit message (Collapse)Author
2008-03-26[VLAN]: Don't copy ALLMULTI/PROMISC flags from underlying devicePatrick McHardy
Changing these flags requires to use dev_set_allmulti/dev_set_promiscuity or dev_change_flags. Setting it directly causes two unwanted effects: - the next dev_change_flags call will notice a difference between dev->gflags and the actual flags, enable promisc/allmulti mode and incorrectly update dev->gflags - this keeps the underlying device in promisc/allmulti mode until the VLAN device is deleted Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-17[8021Q]: vlan_dev misannotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[8021Q]: Use proc_create() to setup ->proc_fops firstWang Chen
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23[NET]: Restore sanity wrt. print_mac().David S. Miller
MAC_FMT had only one user and we tried to get rid of that, but this created more problems than it solved. As a result, this reverts three commits: 235365f3aaaa10b7056293877c0ead50425f25c7 ("net/8021q/vlan_dev.c: Use print_mac."), fea5fa875eb235dc186b1f5184eb36abc63e26cc ("[NET]: Remove MAC_FMT"), and 8f789c48448aed74fe1c07af76de8f04adacec7d ("[NET]: Elminate spurious print_mac() calls.") Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17net/8021q/vlan_dev.c: Use print_mac.Joe Perches
Remove direct use of MAC_FMT Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[VLAN]: set_rx_mode support for unicast address listChris Leech
Reuse the existing logic for multicast list synchronization for the unicast address list. The core of dev_mc_sync/unsync are split out as __dev_addr_sync/unsync and moved from dev_mcast.c to dev.c. These are then used to implement dev_unicast_sync/unsync as well. I'm working on cleaning up Intel's FCoE stack, which generates new MAC addresses from the fibre channel device id assigned by the fabric as per the current draft specification in T11. When using such a protocol in a VLAN environment it would be nice to not always be forced into promiscuous mode, assuming the underlying Ethernet driver supports multiple unicast addresses as well. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2008-01-28[VLAN]: sparse warning fixStephen Hemminger
Minor sparse warning fix. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Move protocol determination to seperate functionPavel Emelyanov
I think, that we can make this code flow easier to understand by introducing the vlan_set_encap_proto() function (I hope the name is good) to setup the skb proto and merge the paths calling netif_rx() together. [Patrick: Modified to apply on top of my previous patches] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Clean up vlan_skb_recv()Patrick McHardy
- remove three instances of identical code - remove unnecessary NULL initialization - remove obvious and unnecessary comments Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Update list addressPatrick McHardy
VLAN related mail should go to netdev. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: checkpatch cleanupsPatrick McHardy
Checkpatch cleanups, consisting mainly of overly long lines and missing spaces. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Turn VLAN_DEV_INFO into inline functionPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Simplify vlan unregistrationPatrick McHardy
Keep track of the number of VLAN devices in a vlan group. This allows to have the caller sense when the group is going to be destroyed and stop using it, which in turn allows to remove the wrapper around unregister_vlan_dev for the NETDEV_UNREGISTER notifier and avoid iterating over all possible VLAN ids whenever a device in unregistered. Also fix what looks like a use-after-free (but is actually safe since we're holding the RTNL), the real_dev reference should not be dropped while we still use it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Clean up unregister_vlan_devPatrick McHardy
Save two levels of indentation by aborting on error conditions, remove unnecessary initialization to NULL and remove two obvious comments. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Clean up initialization codePatrick McHardy
- move module init/exit functions to end of file, remove some now unnecessary forward declarations - remove some obvious comments - clean up proc init function and move a proc-related printk there Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Remove non-implemented ioctlsPatrick McHardy
The GET_VLAN_INGRESS_PRIORITY_CMD/GET_VLAN_EGRESS_PRIORITY_CMD ioctls are not implemented and won't be, new functionality will be added to the netlink interface. Remove the code and make the ioctl handler return -EOPNOTSUPP for unknown commands instead of -EINVAL. Also remove a comment about passing unknown commands to the underlying device, that doesn't make any sense since its a VLAN specific ioctl and if its not implemented here, its implemented nowhere. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Clean up debugging and printksPatrick McHardy
- use pr_* functions and common prefix for non-device related messages - remove VLAN_ printk levels - kill lots of useless debugging statements - remove a few unnecessary printks like for double VID registration (already returns -EEXIST) and kill of a number of unnecessary checks in vlan_proc_{add,rem}_dev() that are already performed by the caller Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Kill useless checkPatrick McHardy
vlan->real_dev is always equal to the device since thats what we used for the lookup. It doesn't even seem worth a WARN_ON or BUG_ON. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Move device setup to vlan_dev.cPatrick McHardy
Move device setup to vlan_dev.c and make all the VLAN device methods static. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Use dev->statsPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Kill useless VLAN_NAME definePatrick McHardy
The only user already includes __FUNCTION__ (vlan_proto_init) in the output, which is enough to identify what the message is about. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-10[VLAN]: nested VLAN: fix lockdep's recursive locking warningJarek Poplawski
Allow vlans nesting other vlans without lockdep's warnings (max. 2 levels i.e. parent + child). Thanks to Patrick McHardy for pointing a bug in the first version of this patch. Reported-by: Benny Amorsen Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[VLAN]: Fix potential race in vlan_cleanup_module vs vlan_ioctl_handler.Pavel Emelyanov
The vlan module cleanup function starts with vlan_netlink_fini(); vlan_ioctl_set(NULL); The first call removes all the vlan devices and the second one closes the vlan ioctl. AFAIS there's a tiny race window between these two calls - after rtnl unregistered all the vlans, but the ioctl handler isn't set to NULL yet, user can manage to call this ioctl and create one vlan device, and that this function will later BUG_ON seeing non-emply hashes. I think, that we must first close the vlan ioctl and only after this remove all the vlans with the vlan_netlink_fini() call. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-07[VLAN]: Lost rtnl_unlock() in vlan_ioctl()Pavel Emelyanov
The SET_VLAN_NAME_TYPE_CMD command w/o CAP_NET_ADMIN capability doesn't release the rtnl lock. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-29[VLAN]: Fix nested VLAN transmit bugJoonwoo Park
Fix misbehavior of vlan_dev_hard_start_xmit() for recursive encapsulations. Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-10[VLAN]: Allow setting mac address while device is upPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-10[VLAN]: Don't synchronize addresses while the vlan device is downPatrick McHardy
While the VLAN device is down, the unicast addresses are not configured on the underlying device, so we shouldn't attempt to sync them. Noticed by Dmitry Butskoy <buc@odusz.so-cdu.ru> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07[VLAN]: Fix SET_VLAN_INGRESS_PRIORITY_CMD ioctlPatrick McHardy
Based on report and patch by Doug Kehn <rdkehn@yahoo.com>: vconfig returns the following error when attempting to execute the set_ingress_map command: vconfig: socket or ioctl error for set_ingress_map: Operation not permitted In vlan.c, vlan_ioctl_handler for SET_VLAN_INGRESS_PRIORITY_CMD sets err = -EPERM and calls vlan_dev_set_ingress_priority. vlan_dev_set_ingress_priority is a void function so err remains at -EPERM and results in the vconfig error (even though the ingress map was set). Fix by setting err = 0 after the vlan_dev_set_ingress_priority call. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[8021Q]: transfer dev_id from real deviceUrsula Braun
A net_device struct provides field dev_id. It is used for unique ipv6 generation in case of shared network cards (as for the OSA network cards of IBM System z). If VLAN devices are built on top of such shared network cards, this dev_id information needs to be transferred to the VLAN device. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Move hardware header operations out of netdevice.Stephen Hemminger
Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Wrap netdevice hardware header creation.Stephen Hemminger
Add inline for common usage of hardware header creation, and fix bug in IPV6 mcast where the assumption about negative return is an errno. Negative return from hard_header means not enough space was available,(ie -N bytes). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make the device list and device lookups per namespace.Eric W. Biederman
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make device event notification network namespace safeEric W. Biederman
Every user of the network device notifiers is either a protocol stack or a pseudo device. If a protocol stack that does not have support for multiple network namespaces receives an event for a device that is not in the initial network namespace it quite possibly can get confused and do the wrong thing. To avoid problems until all of the protocol stacks are converted this patch modifies all netdev event handlers to ignore events on devices that are not in the initial network namespace. As the rest of the code is made network namespace aware these checks can be removed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make packet reception network namespace safeEric W. Biederman
This patch modifies every packet receive function registered with dev_add_pack() to drop packets if they are not from the initial network namespace. This should ensure that the various network stacks do not receive packets in a anything but the initial network namespace until the code has been converted and is ready for them. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make /proc/net per network namespaceEric W. Biederman
This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16[VLAN]: Fix net_device leak.Al Viro
In "[VLAN]: Move device registation to seperate function" (commit e89fe42cd03c8fd3686df82d8390a235717a66de), a pile of code got moved to register_vlan_dev(), including grabbing a reference to underlying device. However, original dev_hold() had been left behind, so we leak a reference to net_device now... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[VLAN/BRIDGE]: Fix "skb_pull_rcsum - Fatal exception in interrupt"Evgeniy Polyakov
I tried to preserve bridging code as it was before, but logic is quite strange - I think we should free skb on error, since it is already unshared and thus will just leak. Herbert Xu states: > + if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) > + goto out; If this happens it'll be a double-free on skb since we'll return NF_DROP which makes the caller free it too. We could return NF_STOLEN to prevent that but I'm not sure whether that's correct netfilter semantics. Patrick, could you please make a call on this? Patrick McHardy states: NF_STOLEN should work fine here. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14[VLAN] net/8021q/vlanproc.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we'd have already oops'ed if "vlandev" was NULL. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[NET]: ethtool ops are the only wayMatthew Wilcox
During the transition to the ethtool_ops way of doing things, we supported calling the device's ->do_ioctl method to allow unconverted drivers to continue working. Those days are long behind us, all in-tree drivers use the ethtool_ops way, and so we no longer need to support this. The bonding driver is the biggest beneficiary of this; it no longer needs to call ioctl() as a fallback if ethtool_ops aren't supported. Also put a proper copyright statement on ethtool.c. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-24[8021Q]: vlan_ioctl_handler: fix return valueAndrew Morton
net/8021q/vlan.c: In function 'vlan_ioctl_handler': net/8021q/vlan.c:700: warning: 'err' may be used uninitialized in this function The warning is incorrect, but from my reading this ioctl will return -EINVAL on success. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Fix memset lengthPatrick McHardy
Fix sizeof(ETH_ALEN) Introduced by my rtnl_link patches. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Use multicast list synchronization helpersPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Fix promiscous/allmulti synchronization racesPatrick McHardy
The set_multicast_list function may be called without holding the rtnl mutex, resulting in races when changing the underlying device's promiscous and allmulti state. Use the change_rx_mode hook, which is always invoked under the rtnl. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[RTNETLINK]: rtnl_link: allow specifying initial device addressPatrick McHardy
Drivers need to validate the initial addresses in their netlink attribute validation function or manually reject them if they can't support this. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[RTNETLINK]: rtnl_link API simplificationPatrick McHardy
All drivers need to unregister their devices in the module unload function. While doing so they must hold the rtnl and atomically unregister the rtnl_link ops as well. This makes the rtnl_link_unregister function that takes the rtnl itself completely useless. Provide default newlink/dellink functions, make __rtnl_link_unregister and rtnl_link_unregister unregister all devices with matching rtnl_link_ops and change the existing users to take advantage of that. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[VLAN]: Fix MAC address handlingPatrick McHardy
The VLAN MAC address handling is broken in multiple ways. When the address differs when setting it, the real device is put in promiscous mode twice, but never taken out again. Additionally it doesn't resync when the real device's address is changed and needlessly puts it in promiscous mode when the vlan device is still down. Fix by moving address handling to vlan_dev_open/vlan_dev_stop and properly deal with address changes in the device notifier. Also switch to dev_unicast_add (which needs the exact same handling). Since the set_mac_address handler is identical to the generic ethernet one with these changes, kill it and use ether_setup(). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[NET]: Make all initialized struct seq_operations const.Philippe De Muyter
Make all initialized struct seq_operations in net/ const Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[VLAN]: Use rtnl_link APIPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[VLAN]: Introduce symbolic constants for flag valuesPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>