aboutsummaryrefslogtreecommitdiff
path: root/net/9p
AgeCommit message (Collapse)Author
2009-02-069p: fix endian issues [attempt 3]Eric Van Hensbergen
When the changes were done to the protocol last release, some endian bugs crept in. This patch fixes those endian problems and has been verified to run on 32/64 bit and x86/ppc architectures. This version of the patch incorporates the correct annotations for endian variables. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19net/9p: fid->fid is used uninitializedRoel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-159p: disallow RDMA if RDMA CM isn't availableRoland Dreier
If INET=y and INFINIBAND=y, but IPV6=m then INFINIBAND_ADDR_TRANS is set to n and the RDMA CM functions rdma_connect() et al are not built. However, the current config dependencies allow NET_9P_RDMA to be selected in this, which leads to a build failure. Fix this by adding a dependency on INFINIBAND_ADDR_TRANS to disallow NET_9P_RDMA in this case. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
2008-11-21net: remove redundant argument commentsQinghuang Feng
Remove redundant argument comments in files of net/* Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-18Merge branch 'master' into nextJames Morris
Conflicts: fs/cifs/misc.c Merge to resolve above, per the patch below. Signed-off-by: James Morris <jmorris@namei.org> diff --cc fs/cifs/misc.c index ec36410,addd1dc..0000000 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@@ -347,13 -338,13 +338,13 @@@ header_assemble(struct smb_hdr *buffer /* BB Add support for establishing new tCon and SMB Session */ /* with userid/password pairs found on the smb session */ /* for other target tcp/ip addresses BB */ - if (current->fsuid != treeCon->ses->linux_uid) { + if (current_fsuid() != treeCon->ses->linux_uid) { cFYI(1, ("Multiuser mode and UID " "did not match tcon uid")); - read_lock(&GlobalSMBSeslock); - list_for_each(temp_item, &GlobalSMBSessionList) { - ses = list_entry(temp_item, struct cifsSesInfo, cifsSessionList); + read_lock(&cifs_tcp_ses_lock); + list_for_each(temp_item, &treeCon->ses->server->smb_ses_list) { + ses = list_entry(temp_item, struct cifsSesInfo, smb_ses_list); - if (ses->linux_uid == current->fsuid) { + if (ses->linux_uid == current_fsuid()) { if (ses->server == treeCon->ses->server) { cFYI(1, ("found matching uid substitute right smb_uid")); buffer->Uid = ses->Suid;
2008-11-149p: restrict RDMA usageRandy Dunlap
linux-next: Make 9p's RDMA option depend on INET since it uses Infiniband rdma_* functions and that code depends on INET. Otherwise 9p can try to use symbols which don't exist. ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined! I used an if/endif block so that the menu items would remain presented together. Also correct an article adjective. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-14Merge branch 'master' into nextJames Morris
Conflicts: security/keys/internal.h security/keys/process_keys.c security/keys/request_key.c Fixed conflicts above by using the non 'tsk' versions. Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Wrap task credential accesses in 9P2000 filesystemDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Reviewed-by: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: v9fs-developer@lists.sourceforge.net Signed-off-by: James Morris <jmorris@namei.org>
2008-11-05net/9p: fix printk format warningsRandy Dunlap
Fix printk format warnings in net/9p. Built cleanly on 7 arches. net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64' net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64' net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-05unsigned fid->fid cannot be negativeRoel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-059p: rdma: remove duplicated #includeHuang Weiyi
Removed duplicated #include <rdma/ib_verbs.h> in net/9p/trans_rdma.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-05p9: Fix leak of waitqueue in request allocation pathTom Tucker
If a T or R fcall cannot be allocated, the function returns an error but neglects to free the wait queue that was successfully allocated. If it comes through again a second time this wq will be overwritten with a new allocation and the old allocation will be leaked. Also, if the client is subsequently closed, the close path will attempt to clean up these allocations, so set the req fields to NULL to avoid duplicate free. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-059p: Remove unneeded free of fcall for FlushTom Tucker
T and R fcall are reused until the client is destroyed. There does not need to be a special case for Flush Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-059p: Make all client spin locks IRQ safeTom Tucker
The client lock must be IRQ safe. Some of the lock acquisition paths took regular spin locks. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-059p: rdma: Set trans prior to requesting async connection opsTom Tucker
The RDMA connection manager is fundamentally asynchronous. Since the async callback context is the client pointer, the transport in the client struct needs to be set prior to calling the first async op. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-229p: fix sparse warningsEric Van Hensbergen
Several sparse warnings were introduced by patches accepted during the merge window which weren't caught. This patch fixes those warnings. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-229p: rdma: RDMA Transport Support for 9PTom Tucker
This patch implements the RDMA transport provider for 9P. It allows mounts to be performed over iWARP and IB capable network interfaces. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Latchesar Ionkov <lionkov@lanl.gov>
2008-10-229p: fix debug build errorEric Van Hensbergen
Fixes build problem with 9p when building with debug disabled. Also contains some fixes for warnings which pop up when CONFIG_NET_9P_DEBUG is disabled. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: add more conservative lockingEric Van Hensbergen
During the reorganization some of the multi-theaded locking assumptions were accidently relaxed. This patch moves us back towards a more conservative locking strategy. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: fix oops in protocol stat parsing error path.Eric Van Hensbergen
When we get an error on parsing a stat due to a protocol bug, we can generate an oops during cleanup because we didn't initialize the string pointers in the stat structure. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: Improve debug supportEric Van Hensbergen
The new debug support lacks some of the information that the previous fcprint code provided -- this patch focuses on better presentation of debug data along with more helpful debug along error paths. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: eliminate depricated conv functionsEric Van Hensbergen
Remove depricated conv functions which have been replaced with new protocol routines. This patch also reworks the one instance of the file-system code which directly calls conversion routines (to accomplish unpacking dirreads). Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: rework client code to use new protocol support functionsEric Van Hensbergen
Now that the new protocol functions are in place, this patch switches the client code to using the new support code. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: remove unnecessary tag field from p9_req_t structureEric Van Hensbergen
This removes the vestigial tag field from the p9_req_t structure. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: remove 9p fcall debug printsEric Van Hensbergen
One of the current debug options allows users to get a verbose dump of fcalls. This isn't really necessary as correctly parsed protocol frames can be printed as part of the code in the client functions. The consolidated printfcalls structure would require new entries to be added for every extension. This patch removes the debug print methods and their use. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: add new protocol support codeEric Van Hensbergen
This adds a new protocol processing support code based on Anthony Liguori's 9p library code. This code performs protocol marshalling/unmarshalling using printf like strings to represent protocol elements. It is my intent to use them to replace the current functions in conv.c as well as the p9_create_* functions. This should make the client implementation much more clear, and also make it much easier to add new protocol extensions by limiting the number of places in which changes need to be made. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: encapsulate version functionEric Van Hensbergen
Alsmot all 9P client wire functions have their own (set of) functions. Tversion is an exception as its encapsulated into the client_create code. This patch moves the protocol specifics of this to a function to match the rest of the code. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: move dirread to fs layerEric Van Hensbergen
Currently reading a directory is implemented in the client code. This function is not actually a wire operation, but a meta operation which calls read operations and processes the results. This patch moves this functionality to the fs layer and calls component wire operations instead of constructing their packets. This provides a cleaner separation and will help when we reorganize the client functions and protocol processing methods. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: move readn meta-function from client to fs layerEric Van Hensbergen
There are a couple of methods in the client code which aren't actually wire operations. To keep things organized cleaner, these operations are being moved to the fs layer. This patch moves the readn meta-function (which executes multiple wire reads until a buffer is full) to the fs layer. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: consolidate read/write functionsEric Van Hensbergen
Currently there are two separate versions of read and write. One for dealing with user buffers and the other for dealing with kernel buffers. There is a tremendous amount of code duplication in the otherwise identical versions of these functions. This patch adds an additional user buffer parameter to read and write and conditionalizes handling of the buffer on whether the kernel buffer or the user buffer is populated. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: drop broken unused error path from p9_conn_create()Tejun Heo
Post p9_fd_poll() error path which checks m->poll_waddr[i] for PTR_ERR value has the following problems. * It's completely unused. Error value is set iff NULL @wait_address has been specified to p9_pollwait() which is guaranteed not to happen. * It dereferences @m after deallocating it (introduced by 571ffeaf and spotted by Raja R Harinath. * It returned the wrong value on error. It should return poll_waddr[i] but it returnes poll_waddr (introduced by 571ffeaf). * p9_mux_poll_stop() doesn't handle PTR_ERR value. It will try to operate on the PTR_ERR value as if it's a normal pointer and cause oops. As the error path is bogus in the first place, there's no reason to hold onto it. Kill it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Cc: Raja R Harinath <harinath@hurrynot.org>
2008-10-179p: make rpc code common and rework flush codeEric Van Hensbergen
This code moves the rpc function to the common client base, reorganizes the flush code to be more simple and stable, and makes the necessary adjustments to the underlying transports to adapt to the new structure. This reduces the overall amount of code duplication between the transports and should make adding new transports more straightforward. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: use the rcall structure passed in the request in trans_fd read_workEric Van Hensbergen
This patch reworks the read_work function to enable it to directly use a passed in rcall structure. This should help allow us to remove unnecessary copies in the future. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: apply common request code to trans_fdEric Van Hensbergen
Apply the now common p9_req_t structure to the fd transport. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: apply common tagpool handling to trans_fdEric Van Hensbergen
Simplify trans_fd by using new common client tagpool structure. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: move request management to client codeEric Van Hensbergen
The virtio transport uses a simplified request management system that I want to use for all transports. This patch adapts and moves the exisiting code for managing requests to the client common code. Later patches will apply these mechanisms to the other transports. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: eliminate callback complexityEric Van Hensbergen
The current trans_fd rpc mechanisms use a dynamic callback mechanism which introduces a lot of complexity which only accomodates a single special case. This patch removes much of that complexity in favor of a simple exception mechanism to deal with flushes. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: consolidate mux_rpc and request structureEric Van Hensbergen
Currently, trans_fd has two structures (p9_req and p9_mux-rpc) which contain mostly duplicate data. This patch consolidates these two structures and removes p9_mux_rpc. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: remove unnecessary prototypesEric Van Hensbergen
Cleanup files by reordering functions in order to remove need for unnecessary function prototypes. There are no code changes here, just functions being moved around and prototypes being eliminated. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: remove duplicate client stateEric Van Hensbergen
Now that we are passing client state into the transport modules, remove duplicate state which is present in transport private structures. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p: consolidate transport structureEric Van Hensbergen
Right now there is a transport module structure which provides per-transport type functions and data and a transport structure which contains per-instance public data as well as function pointers to instance specific functions. This patch moves public transport visible instance data to the client structure (which in some cases had duplicate data) and consolidates the functions into the transport module structure. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-179p-trans_fd: use single pollerTejun Heo
trans_fd used pool of upto 100 pollers to monitor the r/w fds. The approach makes sense in userspace back when the only available interfaces were poll(2) and select(2). As each event monitor - trigger - handling iteration took O(n) where `n' is the number of watched fds, it makes sense to spread them to many pollers such that the `n' can be divided by the number of pollers. However, this doesn't make any sense in kernel because persistent edge triggered event monitoring is how the whole thing is implemented in the kernel in the first place. This patch converts trans_fd to use single poller which watches all the fds instead of the poll of pollers approach. All the fds are registered for monitoring on creation and only the fds with pending events are scanned when something happens much like how epoll is implemented. This change makes trans_fd fd monitoring more efficient and simpler. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-13vfs: Use const for kernel parser tableSteven Whitehouse
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-249p: fix put_data error handlingEric Van Hensbergen
Abhishek Kulkarni pointed out an inconsistency in the way errors are returned from p9_put_data. On deeper exploration it seems the error handling for this path was completely wrong. This patch adds checks for allocation problems and propagates errors correctly. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-249p: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-09-249p-trans_fd: fix and clean up module init/exit pathsTejun Heo
trans_fd leaked p9_mux_wq on module unload. Fix it. While at it, collapse p9_mux_global_init() into p9_trans_fd_init(). It's easier to follow this way and the global poll_tasks array is about to removed anyway. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-249p-trans_fd: don't do fs segment mangling in p9_fd_poll()Tejun Heo
p9_fd_poll() is never called with user pointers and f_op->poll() doesn't expect its arguments to be from userland. There's no need to set kernel ds before calling f_op->poll() from p9_fd_poll(). Remove it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-249p-trans_fd: clean up p9_conn_create()Tejun Heo
* Use kzalloc() to allocate p9_conn and remove 0/NULL initializations. * Clean up error return paths. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-249p-trans_fd: fix trans_fd::p9_conn_destroy()Tejun Heo
p9_conn_destroy() first kills all current requests by calling p9_conn_cancel(), then waits for the request list to be cleared by waiting on p9_conn->equeue. After that, polling is stopped and the trans is destroyed. This sequence has a few problems. * Read and write works were never cancelled and the p9_conn can be destroyed while the works are running as r/w works remove requests from the list and dereference the p9_conn from them. * The list emptiness wait using p9_conn->equeue wouldn't trigger because p9_conn_cancel() always clears all the lists and the only way the wait can be triggered is to have another task to issue a request between the slim window between p9_conn_cancel() and the wait, which isn't safe under the current implementation with or without the wait. This patch fixes the problem by first stopping poll, which can schedule r/w works, first and cancle r/w works which guarantees that r/w works are not and will not run from that point and then calling p9_conn_cancel() and do the rest of destruction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>