aboutsummaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2009-12-03Bluetooth: Add RFCOMM option to use L2CAP ERTM modeMarcel Holtmann
By default the RFCOMM layer would still use L2CAP basic mode. For testing purposes this option enables RFCOMM to select enhanced retransmission mode. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Add L2CAP option for max transmit valueMarcel Holtmann
For testing purposes it is important to modify the max transmit value. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Fix 'SendRRorRNR' to send the ReqSeq valueGustavo F. Padovan
SendRRorRNR needs to acknowledge received I-frames (actually every packet needs to acknowledge received I-frames by sending the proper packet sequence number), so ReqSeq is set to the next I-frame number sequence to be pulled by the reassembly function. SendRRorRNR tells the remote side about local busy conditions, it sends a Receiver Ready frame if local busy is false or a Receiver Not Ready if local busy is true. ReqSeq is the packet's field to send the number of the acknowledged packets. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Implement RejActioned flagGustavo F. Padovan
RejActioned is used to prevent retransmission when a entity is on the WAIT_F state, i.e., waiting for a frame with F-bit set due local busy condition or a expired retransmission timer. (When these two events raise they send a frame with the Poll bit set and enters in the WAIT_F state to wait for a frame with the Final bit set.) The local entity doesn't send I-frames(the data frames) until the receipt of a frame with F-bit set. When that happens it also set RejActioned to false. RejActioned is a mandatory feature of ERTM spec. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Fix sending ReqSeq on I-framesGustavo F. Padovan
As specified by ERTM spec an ERTM channel can acknowledge received I-frames(the data frames) by sending an I-frame with the proper ReqSeq value (i.e. ReqSeq is set to BufferSeq). Until now we aren't setting the ReqSeq value on I-frame control bits. That way we can save sending S-frames(Supervise frames) only to acknowledge receipt of I-frames. It is very helpful to the full-duplex channel. ReqSeq is the packet sequence number sent in an acknowledgement frame to acknowledge receipt of frames up to (ReqSeq - 1). BufferSeq controls the receiver buffer, it is used to delay acknowledgement of new frames to not cause buffer overflow. BufferSeq value is not increased until frames are pulled by reassembly function. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Fix unset of SrejActioned flagGustavo F. Padovan
SrejActioned is a flag that when set prevents local side to retransmit a I-frame(the data frame) already retransmitted. The local entity can retransmit again only when it receives a SREJ frame with the F-bit set. SREJ frame - Selective Reject frame - is sent when an entity wants the retransmission of a specific I-frame that was lost or corrupted. This bug can put ERTM in an unknown state once the entity can't retransmit. A frame with the Final bit set is expected when the local side sends a frame with the Poll bit set due to a local busy condition or a retransmission timer expired. (Receipt of P-bit shall always be replied by a frame with the F-bit set). pi->conn_state keeps informations about many ERTM flags including SrejActioned. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Initialize variables and timers for both channel's sidesGustavo F. Padovan
Fix ERTM's full-duplex channel to work as specified by ERTM spec. ERTM needs to handle state vars, timers and counters to send and receive I-frames(the data frames), i.e., for both sides of data communication. We initialize all of them to the default values here. Full-duplex channel is a mandatory feature of ERTM spec. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Fix handling of BNEP setup connection requestsVikram Kandukuri
According to BNEP test specification the proper response should be sent for a setup connection request message after the BNEP connection setup has been completed. Signed-off-by: Vikram Kandukuri <vikram.kandukuri@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Unobfuscate tasklet_schedule usageMarcel Holtmann
The tasklet schedule function helpers are just an obfuscation. So remove them and call the schedule functions directly. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Turn hci_recv_frame into an exported functionMarcel Holtmann
For future simplification it is important that the hci_recv_frame function is no longer an inline function. So move it into the module itself and export it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Return ENETDOWN when interface is downMarcel Holtmann
Sending commands to a down interface results in a timeout while clearly it should just return ENETDOWN. When using the ioctls this works fine, but not when using the HCI sockets sendmsg interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Implement raw output support for HIDP layerJiri Kosina
Implement raw output callback which is used by hidraw to send raw data to the underlying device. Without this patch, the userspace hidraw-based applications can't send output reports to HID Bluetooth devices. Reported-and-tested-by: Brian Gunn <bgunn@solekai.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-11-29net: Move && and || to end of previous lineJoe Perches
Not including net/atm/ Compiled tested x86 allyesconfig only Added a > 80 column line or two, which I ignored. Existing checkpatch plaints willfully, cheerfully ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/can/Kconfig
2009-11-16Bluetooth: Fix regression with L2CAP configuration in Basic ModeGustavo F. Padovan
Basic Mode is the default mode of operation of a L2CAP entity. In this case the RFC (Retransmission and Flow Control) configuration option should not be used at all. Normally remote L2CAP implementation should just ignore this option, but it can cause various side effects with other Bluetooth stacks that are not capable of handling unknown options. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-11-16Bluetooth: Select Basic Mode as default for SOCK_SEQPACKETGustavo F. Padovan
The default mode for SOCK_SEQPACKET is Basic Mode. So when no mode has been specified, Basic Mode shall be used. This is important for current application to keep working as expected and not cause a regression. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-11-16Bluetooth: Set general bonding security for ACL by defaultAndrei Emeltchenko
This patch fixes double pairing issues with Secure Simple Paring support. It was observed that when pairing with SSP enabled, that the confirmation will be asked twice. http://www.spinics.net/lists/linux-bluetooth/msg02473.html This also causes bug when initiating SSP connection from Windows Vista. The reason is because bluetoothd does not store link keys since HCIGETAUTHINFO returns 0. Setting default to general bonding fixes these issues. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-11-05net: check kern before calling security subsystemEric Paris
Before calling capable(CAP_NET_RAW) check if this operations is on behalf of the kernel or on behalf of userspace. Do not do the security check if it is on behalf of the kernel. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05net: pass kern to net_proto_family create functionEric Paris
The generic __sock_create function has a kern argument which allows the security system to make decisions based on if a socket is being created by the kernel or by userspace. This patch passes that flag to the net_proto_family specific create function, so it can do the same thing. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sh_eth.c
2009-10-19bluetooth: static lock key fixDave Young
When shutdown ppp connection, lockdep waring about non-static key will happen, it is caused by the lock is not initialized properly at that time. Fix with tuning the lock/skb_queue_head init order [ 94.339261] INFO: trying to register non-static key. [ 94.342509] the code is fine but needs lockdep annotation. [ 94.342509] turning off the locking correctness validator. [ 94.342509] Pid: 0, comm: swapper Not tainted 2.6.31-mm1 #2 [ 94.342509] Call Trace: [ 94.342509] [<c0248fbe>] register_lock_class+0x58/0x241 [ 94.342509] [<c024b5df>] ? __lock_acquire+0xb57/0xb73 [ 94.342509] [<c024ab34>] __lock_acquire+0xac/0xb73 [ 94.342509] [<c024b7fa>] ? lock_release_non_nested+0x17b/0x1de [ 94.342509] [<c024b662>] lock_acquire+0x67/0x84 [ 94.342509] [<c04cd1eb>] ? skb_dequeue+0x15/0x41 [ 94.342509] [<c054a857>] _spin_lock_irqsave+0x2f/0x3f [ 94.342509] [<c04cd1eb>] ? skb_dequeue+0x15/0x41 [ 94.342509] [<c04cd1eb>] skb_dequeue+0x15/0x41 [ 94.342509] [<c054a648>] ? _read_unlock+0x1d/0x20 [ 94.342509] [<c04cd641>] skb_queue_purge+0x14/0x1b [ 94.342509] [<fab94fdc>] l2cap_recv_frame+0xea1/0x115a [l2cap] [ 94.342509] [<c024b5df>] ? __lock_acquire+0xb57/0xb73 [ 94.342509] [<c0249c04>] ? mark_lock+0x1e/0x1c7 [ 94.342509] [<f8364963>] ? hci_rx_task+0xd2/0x1bc [bluetooth] [ 94.342509] [<fab95346>] l2cap_recv_acldata+0xb1/0x1c6 [l2cap] [ 94.342509] [<f8364997>] hci_rx_task+0x106/0x1bc [bluetooth] [ 94.342509] [<fab95295>] ? l2cap_recv_acldata+0x0/0x1c6 [l2cap] [ 94.342509] [<c02302c4>] tasklet_action+0x69/0xc1 [ 94.342509] [<c022fbef>] __do_softirq+0x94/0x11e [ 94.342509] [<c022fcaf>] do_softirq+0x36/0x5a [ 94.342509] [<c022fe14>] irq_exit+0x35/0x68 [ 94.342509] [<c0204ced>] do_IRQ+0x72/0x89 [ 94.342509] [<c02038ee>] common_interrupt+0x2e/0x34 [ 94.342509] [<c024007b>] ? pm_qos_add_requirement+0x63/0x9d [ 94.342509] [<c038e8a5>] ? acpi_idle_enter_bm+0x209/0x238 [ 94.342509] [<c049d238>] cpuidle_idle_call+0x5c/0x94 [ 94.342509] [<c02023f8>] cpu_idle+0x4e/0x6f [ 94.342509] [<c0534153>] rest_init+0x53/0x55 [ 94.342509] [<c0781894>] start_kernel+0x2f0/0x2f5 [ 94.342509] [<c0781091>] i386_start_kernel+0x91/0x96 Reported-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Tested-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-19bluetooth: scheduling while atomic bug fixDave Young
Due to driver core changes dev_set_drvdata will call kzalloc which should be in might_sleep context, but hci_conn_add will be called in atomic context Like dev_set_name move dev_set_drvdata to work queue function. oops as following: Oct 2 17:41:59 darkstar kernel: [ 438.001341] BUG: sleeping function called from invalid context at mm/slqb.c:1546 Oct 2 17:41:59 darkstar kernel: [ 438.001345] in_atomic(): 1, irqs_disabled(): 0, pid: 2133, name: sdptool Oct 2 17:41:59 darkstar kernel: [ 438.001348] 2 locks held by sdptool/2133: Oct 2 17:41:59 darkstar kernel: [ 438.001350] #0: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.+.}, at: [<faa1d2f5>] lock_sock+0xa/0xc [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001360] #1: (&hdev->lock){+.-.+.}, at: [<faa20e16>] l2cap_sock_connect+0x103/0x26b [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001371] Pid: 2133, comm: sdptool Not tainted 2.6.31-mm1 #2 Oct 2 17:41:59 darkstar kernel: [ 438.001373] Call Trace: Oct 2 17:41:59 darkstar kernel: [ 438.001381] [<c022433f>] __might_sleep+0xde/0xe5 Oct 2 17:41:59 darkstar kernel: [ 438.001386] [<c0298843>] __kmalloc+0x4a/0x15a Oct 2 17:41:59 darkstar kernel: [ 438.001392] [<c03f0065>] ? kzalloc+0xb/0xd Oct 2 17:41:59 darkstar kernel: [ 438.001396] [<c03f0065>] kzalloc+0xb/0xd Oct 2 17:41:59 darkstar kernel: [ 438.001400] [<c03f04ff>] device_private_init+0x15/0x3d Oct 2 17:41:59 darkstar kernel: [ 438.001405] [<c03f24c5>] dev_set_drvdata+0x18/0x26 Oct 2 17:41:59 darkstar kernel: [ 438.001414] [<fa51fff7>] hci_conn_init_sysfs+0x40/0xd9 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001422] [<fa51cdc0>] ? hci_conn_add+0x128/0x186 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001429] [<fa51ce0f>] hci_conn_add+0x177/0x186 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001437] [<fa51cf8a>] hci_connect+0x3c/0xfb [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001442] [<faa20e87>] l2cap_sock_connect+0x174/0x26b [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001448] [<c04c8df5>] sys_connect+0x60/0x7a Oct 2 17:41:59 darkstar kernel: [ 438.001453] [<c024b703>] ? lock_release_non_nested+0x84/0x1de Oct 2 17:41:59 darkstar kernel: [ 438.001458] [<c028804b>] ? might_fault+0x47/0x81 Oct 2 17:41:59 darkstar kernel: [ 438.001462] [<c028804b>] ? might_fault+0x47/0x81 Oct 2 17:41:59 darkstar kernel: [ 438.001468] [<c033361f>] ? __copy_from_user_ll+0x11/0xce Oct 2 17:41:59 darkstar kernel: [ 438.001472] [<c04c9419>] sys_socketcall+0x82/0x17b Oct 2 17:41:59 darkstar kernel: [ 438.001477] [<c020329d>] syscall_call+0x7/0xb Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12net: Generalize socket rx gap / receive queue overflow cmsgNeil Horman
Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 977750076d98c7ff6cbda51858bb5a5894a9d9ab (my af packet cmsg patch) is reverted Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07net: mark net_proto_ops as constStephen Hemminger
All usages of structure net_proto_ops should be declared const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30net: Make setsockopt() optlen be unsigned.David S. Miller
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Remove duplicate Kconfig entry HID: consolidate connect and disconnect into core code HID: fix non-atomic allocation in hid_input_report
2009-09-17HID: consolidate connect and disconnect into core codeJiri Kosina
HID core registers input, hidraw and hiddev devices, but leaves unregistering it up to the individual driver, which is not really nice. Let's move all the logic to the core. Reported-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Brian Rogers <brian@xyzw.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-15driver model: constify attribute groupsDavid Brownell
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-11net: Add DEVTYPE support for Ethernet based devicesMarcel Holtmann
The Ethernet framing is used for a lot of devices these days. Most prominent are WiFi and WiMAX based devices. However for userspace application it is important to classify these devices correctly and not only see them as Ethernet devices. The daemons like HAL, DeviceKit or even NetworkManager with udev support tries to do the classification in userspace with a lot trickery and extra system calls. This is not good and actually reaches its limitations. Especially since the kernel does know the type of the Ethernet device it is pretty stupid. To solve this problem the underlying device type needs to be set and then the value will be exported as DEVTYPE via uevents and available within udev. # cat /sys/class/net/wlan0/uevent DEVTYPE=wlan INTERFACE=wlan0 IFINDEX=5 This is similar to subsystems like USB and SCSI that distinguish between hosts, devices, disks, partitions etc. The new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual device type. All device types are free form, but for convenience the same strings as used with RFKILL are choosen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert pseudo-devices to netdev_tx_tStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26Bluetooth: Add support for L2CAP 'Send RRorRNR' actionGustavo F. Padovan
When called, 'Send RRorRNR' should send a RNR frame if local device is busy or a RR frame otherwise. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-26Bluetooth: Handle L2CAP case when the remote receiver is busyGustavo F. Padovan
Implement all issues related to RemoteBusy in the RECV state table. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-26Bluetooth: Acknowledge L2CAP packets when receiving RR-frames (F-bit=1)Gustavo F. Padovan
Implement the Recv ReqSeqAndFBit event when a RR frame with F bit set is received. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-24Bluetooth: Add missing selection of CONFIG_CRC16 for L2CAP layerRandy Dunlap
Fix net/bluetooth/l2cap.c build errors: l2cap.c:(.text+0x126035): undefined reference to `crc16' l2cap.c:(.text+0x126323): undefined reference to `crc16' l2cap.c:(.text+0x12668e): undefined reference to `crc16' l2cap.c:(.text+0x12683b): undefined reference to `crc16' l2cap.c:(.text+0x126956): undefined reference to `crc16' net/built-in.o:l2cap.c:(.text+0x129041): more undefined references to `crc16' follow Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-24Bluetooth: Use proper *_unaligned_le{16,32} helpers for L2CAPGustavo F. Padovan
Simplify more conversions to the right endian with the proper helpers. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-24Bluetooth: Add locking scheme to L2CAP timeout callbacksGustavo F. Padovan
Avoid race conditions when accessing the L2CAP socket from within the timeout handlers. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Fix rejected connection not disconnecting ACL linkLuiz Augusto von Dentz
When using DEFER_SETUP on a RFCOMM socket, a SABM frame triggers authorization which when rejected send a DM response. This is fine according to the RFCOMM spec: the responding implementation may replace the "proper" response on the Multiplexer Control channel with a DM frame, sent on the referenced DLCI to indicate that the DLCI is not open, and that the responder would not grant a request to open it later either. But some stacks doesn't seems to cope with this leaving DLCI 0 open after receiving DM frame. To fix it properly a timer was introduced to rfcomm_session which is used to set a timeout when the last active DLC of a session is unlinked, this will give the remote stack some time to reply with a proper DISC frame on DLCI 0 avoiding both sides sending DISC to each other on stacks that follow the specification and taking care of those who don't by taking down DLCI 0. Signed-off-by: Luiz Augusto von Dentz <luiz.dentz@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Full support for receiving L2CAP SREJ framesGustavo F. Padovan
Support for receiving of SREJ frames as specified by the state table. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add support for L2CAP SREJ exceptionGustavo F. Padovan
When L2CAP loses an I-frame we send a SREJ frame to the transmitter side requesting the lost packet. This patch implement all Recv I-frame events on SREJ_SENT state table except the ones that deal with SendRej (the REJ exception at receiver side is yet not implemented). Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add support for FCS option to L2CAPGustavo F. Padovan
Implement CRC16 check for L2CAP packets. FCS is used by Streaming Mode and Enhanced Retransmission Mode and is a extra check for the packet content. Using CRC16 is the default, L2CAP won't use FCS only when both side send a "No FCS" request. Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com> Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Enable Streaming Mode for L2CAPGustavo F. Padovan
Streaming Mode is helpful for the Bluetooth streaming based profiles, such as A2DP. It doesn't have any error control or flow control. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add support for Retransmission and Monitor TimersGustavo F. Padovan
L2CAP uses retransmission and monitor timers to inquiry the other side about unacked I-frames. After sending each I-frame we (re)start the retransmission timer. If it expires, we start a monitor timer that send a S-frame with P bit set and wait for S-frame with F bit set. If monitor timer expires, try again, at a maximum of L2CAP_DEFAULT_MAX_TX. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Initial support for retransmission of packets with REJ framesGustavo F. Padovan
When receiving an I-frame with unexpected txSeq, receiver side start the recovery procedure by sending a REJ S-frame to the transmitter side. So the transmitter can re-send the lost I-frame. This patch just adds a basic support for retransmission, it doesn't mean that ERTM now has full support for packet retransmission. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add support for Segmentation and Reassembly of SDUsGustavo F. Padovan
ERTM should use Segmentation and Reassembly to break down a SDU in many PDUs on sending data to the other side. On sending packets we queue all 'segments' until end of segmentation and just the add them to the queue for sending. On receiving we create a new SKB with the SDU reassembled. Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com> Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add initial support for ERTM packets transfersGustavo F. Padovan
This patch adds support for ERTM transfers, without retransmission, with txWindow up to 63 and with acknowledgement of packets received. Now the packets are queued before call l2cap_do_send(), so packets couldn't be sent at the time we call l2cap_sock_sendmsg(). They will be sent in an asynchronous way on later calls of l2cap_ertm_send(). Besides if an error occurs on calling l2cap_do_send() we disconnect the channel. Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com> Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Create separate l2cap_send_disconn_req() functionGustavo F. Padovan
The code for sending a disconnect request was repeated several times within L2CAP source code. So move this into its own function. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add configuration support for ERTM and Streaming modeGustavo F. Padovan
Add support to config_req and config_rsp to configure ERTM and Streaming mode. If the remote device specifies ERTM or Streaming mode, then the same mode is proposed. Otherwise ERTM or Basic mode is used. And in case of a state 2 device, the remote device should propose the same mode. If not, then the channel gets disconnected. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add L2CAP RFC option if ERTM is enabledMarcel Holtmann
When trying to establish a connection with Enhanced Retransmission mode enabled, the RFC option needs to be added to the configuration. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Allow setting of L2CAP ERTM via socket optionMarcel Holtmann
To enable Enhanced Retransmission mode it needs to be set via a socket option. A different mode can be set on a socket, but on listen() and connect() the mode is checked and ERTM is only allowed if it is enabled via the module parameter. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22Bluetooth: Add module option to enable L2CAP ERTM supportMarcel Holtmann
Since the Enhanced Retransmission mode for L2CAP is still under heavy development disable it by default and provide a module option to enable it manually for testing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>