aboutsummaryrefslogtreecommitdiff
path: root/net/core/skbuff.c
AgeCommit message (Collapse)Author
2006-07-13[NET]: Update frag_list in pskb_trimHerbert Xu
When pskb_trim has to defer to ___pksb_trim to trim the frag_list part of the packet, the frag_list is not updated to reflect the trimming. This will usually work fine until you hit something that uses the packet length or tail from the frag_list. Examples include esp_output and ip_fragment. Another problem caused by this is that you can end up with a linear packet with a frag_list attached. It is possible to get away with this if we audit everything to make sure that they always consult skb->len before going down onto frag_list. In fact we can do the samething for the paged part as well to avoid copying the data area of the skb. For now though, let's do the conservative fix and update frag_list. Many thanks to Marco Berizzi for helping me to track down this bug. This 4-year old bug took 3 months to track down. Marco was very patient indeed :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-03[PATCH] lockdep: annotate skb_queue_head_initIngo Molnar
Teach special (multi-initialized) locking code to the lock validator. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29[NET]: make skb_release_data() staticAdrian Bunk
skb_release_data() no longer has any users in other files. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[NET]: Added GSO header verificationHerbert Xu
When GSO packets come from an untrusted source (e.g., a Xen guest domain), we need to verify the header integrity before passing it to the hardware. Since the first step in GSO is to verify the header, we can reuse that code by adding a new bit to gso_type: SKB_GSO_DODGY. Packets with this bit set can only be fed directly to devices with the corresponding bit NETIF_F_GSO_ROBUST. If the device doesn't have that bit, then the skb is fed to the GSO engine which will allow the packet to be sent to the hardware if it passes the header check. This patch changes the sg flag to a full features flag. The same method can be used to implement TSO ECN support. We simply have to mark packets with CWR set with SKB_GSO_ECN so that only hardware with a corresponding NETIF_F_TSO_ECN can accept them. The GSO engine can either fully segment the packet, or segment the first MTU and pass the rest to the hardware for further segmentation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26[NET]: skb_find_text ignores to argumentPhil Oester
skb_find_text takes a "to" argument which is supposed to limit how far into the skb it will search for the given text. At present, it seems to ignore that argument on the first skb, and instead return a match even if the text occurs beyond the limit. Patch below fixes this, after adjusting for the "from" starting point. This consequently fixes the netfilter string match's "--to" handling, which currently is broken. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[NET]: Add software TSOv4Herbert Xu
This patch adds the GSO implementation for IPv4 TCP. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[NET]: Merge TSO/UFO fields in sk_buffHerbert Xu
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not going to scale if we add any more segmentation methods (e.g., DCCP). So let's merge them. They were used to tell the protocol of a packet. This function has been subsumed by the new gso_type field. This is essentially a set of netdev feature bits (shifted by 16 bits) that are required to process a specific skb. As such it's easy to tell whether a given device can process a GSO skb: you just have to and the gso_type field and the netdev's features field. I've made gso_type a conjunction. The idea is that you have a base type (e.g., SKB_GSO_TCPV4) that can be modified further to support new features. For example, if we add a hardware TSO type that supports ECN, they would declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO packets would be SKB_GSO_TCPV4. This means that only the CWR packets need to be emulated in software. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[NET]: Avoid allocating skb in skb_padHerbert Xu
First of all it is unnecessary to allocate a new skb in skb_pad since the existing one is not shared. More importantly, our hard_start_xmit interface does not allow a new skb to be allocated since that breaks requeueing. This patch uses pskb_expand_head to expand the existing skb and linearize it if needed. Actually, someone should sift through every instance of skb_pad on a non-linear skb as they do not fit the reasons why this was originally created. Incidentally, this fixes a minor bug when the skb is cloned (tcpdump, TCP, etc.). As it is skb_pad will simply write over a cloned skb. Because of the position of the write it is unlikely to cause problems but still it's best if we don't do it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[NET]: Warn in __skb_trim if skb is pagedHerbert Xu
It's better to warn and fail rather than rarely triggering BUG on paths that incorrectly call skb_trim/__skb_trim on a non-linear skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[SECMARK]: Add secmark support to core networking.James Morris
Add a secmark field to the skbuff structure, to allow security subsystems to place security markings on network packets. This is similar to the nfmark field, except is intended for implementing security policy, rather than than networking policy. This patch was already acked in principle by Dave Miller. Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-20[NET]: Add skb->truesize assertion checking.David S. Miller
Add some sanity checking. truesize should be at least sizeof(struct sk_buff) plus the current packet length. If not, then truesize is seriously mangled and deserves a kernel log message. Currently we'll do the check for release of stream socket buffers. But we can add checks to more spots over time. Incorporating ideas from Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-25[PATCH] slab: implement /proc/slab_allocatorsAl Viro
Implement /proc/slab_allocators. It produces output like: idr_layer_cache: 80 idr_pre_get+0x33/0x4e buffer_head: 2555 alloc_buffer_head+0x20/0x75 mm_struct: 9 mm_alloc+0x1e/0x42 mm_struct: 20 dup_mm+0x36/0x370 vm_area_struct: 384 dup_mm+0x18f/0x370 vm_area_struct: 151 do_mmap_pgoff+0x2e0/0x7c3 vm_area_struct: 1 split_vma+0x5a/0x10e vm_area_struct: 11 do_brk+0x206/0x2e2 vm_area_struct: 2 copy_vma+0xda/0x142 vm_area_struct: 9 setup_arg_pages+0x99/0x214 fs_cache: 8 copy_fs_struct+0x21/0x133 fs_cache: 29 copy_process+0xf38/0x10e3 files_cache: 30 alloc_files+0x1b/0xcf signal_cache: 81 copy_process+0xbaa/0x10e3 sighand_cache: 77 copy_process+0xe65/0x10e3 sighand_cache: 1 de_thread+0x4d/0x5f8 anon_vma: 241 anon_vma_prepare+0xd9/0xf3 size-2048: 1 add_sect_attrs+0x5f/0x145 size-2048: 2 journal_init_revoke+0x99/0x302 size-2048: 2 journal_init_revoke+0x137/0x302 size-2048: 2 journal_init_inode+0xf9/0x1c4 Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Alexander Nyberg <alexn@telia.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> DESC slab-leaks3-locking-fix EDESC From: Andrew Morton <akpm@osdl.org> Update for slab-remove-cachep-spinlock.patch Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Alexander Nyberg <alexn@telia.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-20[SK_BUFF]: export skb_pull_rcsumArnaldo Carvalho de Melo
*** Warning: "skb_pull_rcsum" [net/bridge/bridge.ko] undefined! *** Warning: "skb_pull_rcsum" [net/8021q/8021q.ko] undefined! *** Warning: "skb_pull_rcsum" [drivers/net/pppoe.ko] undefined! *** Warning: "skb_pull_rcsum" [drivers/net/ppp_generic.ko] undefined! Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[NET]: Replace skb_pull/skb_postpull_rcsum with skb_pull_rcsumHerbert Xu
We're now starting to have quite a number of places that do skb_pull followed immediately by an skb_postpull_rcsum. We can merge these two operations into one function with skb_pull_rcsum. This makes sense since most pull operations on receive skb's need to update the checksum. I've decided to make this out-of-line since it is fairly big and the fast path where hardware checksums are enabled need to call csum_partial anyway. Since this is a brand new function we get to add an extra check on the len argument. As it is most callers of skb_pull ignore its return value which essentially means that there is no check on the len argument. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[NET]: Uninline kfree_skb and allow NULL argumentJörn Engel
o Uninline kfree_skb, which saves some 15k of object code on my notebook. o Allow kfree_skb to be called with a NULL argument. Subsequent patches can remove conditional from drivers and further reduce source and object size. Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-19[NET]: NETFILTER: remove duplicated lines and fix order in skb_clone().YOSHIFUJI Hideaki
Some of netfilter-related members are initalized / copied twice in skb_clone(). Remove one. Pointed out by Olivier MATZ <olivier.matz@6wind.com>. And this patch also fixes order of copying / clearing members. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[NET]: Fix skb fclone error path handling.Herbert Xu
On the error path if we allocated an fclone then we will free it in the wrong pool. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-09[NET]: Change some "if (x) BUG();" to "BUG_ON(x);"Kris Katterjohn
This changes some simple "if (x) BUG();" statements to "BUG_ON(x);" Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03[NET]: Speed up __alloc_skb()Benjamin LaHaise
From: Benjamin LaHaise <bcrl@kvack.org> In __alloc_skb(), the use of skb_shinfo() which casts a u8 * to the shared info structure results in gcc being forced to do a reload of the pointer since it has no information on possible aliasing. Fix this by using a pointer to refer to skb_shared_info. By initializing skb_shared_info sequentially, the write combining buffers can reduce the number of memory transactions to a single write. Reorder the initialization in __alloc_skb() to match the structure definition. There is also an alignment issue on 64 bit systems with skb_shared_info by converting nr_frags to a short everything packs up nicely. Also, pass the slab cache pointer according to the fclone flag instead of using two almost identical function calls. This raises bw_unix performance up to a peak of 707KB/s when combined with the spinlock patch. It should help other networking protocols, too. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-05[NET]: make function pointer argument parseable by kernel-docMartin Waitz
When a function takes a function pointer as argument it should use the 'return (*pointer)(params...)' syntax used everywhere else in the kernel as this is recognized by kernel-doc. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-09[NETFILTER]: Add nf_conntrack subsystem.Yasuyuki Kozakai
The existing connection tracking subsystem in netfilter can only handle ipv4. There were basically two choices present to add connection tracking support for ipv6. We could either duplicate all of the ipv4 connection tracking code into an ipv6 counterpart, or (the choice taken by these patches) we could design a generic layer that could handle both ipv4 and ipv6 and thus requiring only one sub-protocol (TCP, UDP, etc.) connection tracking helper module to be written. In fact nf_conntrack is capable of working with any layer 3 protocol. The existing ipv4 specific conntrack code could also not deal with the pecularities of doing connection tracking on ipv6, which is also cured here. For example, these issues include: 1) ICMPv6 handling, which is used for neighbour discovery in ipv6 thus some messages such as these should not participate in connection tracking since effectively they are like ARP messages 2) fragmentation must be handled differently in ipv6, because the simplistic "defrag, connection track and NAT, refrag" (which the existing ipv4 connection tracking does) approach simply isn't feasible in ipv6 3) ipv6 extension header parsing must occur at the correct spots before and after connection tracking decisions, and there were no provisions for this in the existing connection tracking design 4) ipv6 has no need for stateful NAT The ipv4 specific conntrack layer is kept around, until all of the ipv4 specific conntrack helpers are ported over to nf_conntrack and it is feature complete. Once that occurs, the old conntrack stuff will get placed into the feature-removal-schedule and we will fully kill it off 6 months later. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-28[IPv4/IPv6]: UFO Scatter-gather approachAnanda Raju
Attached is kernel patch for UDP Fragmentation Offload (UFO) feature. 1. This patch incorporate the review comments by Jeff Garzik. 2. Renamed USO as UFO (UDP Fragmentation Offload) 3. udp sendfile support with UFO This patches uses scatter-gather feature of skb to generate large UDP datagram. Below is a "how-to" on changes required in network device driver to use the UFO interface. UDP Fragmentation Offload (UFO) Interface: ------------------------------------------- UFO is a feature wherein the Linux kernel network stack will offload the IP fragmentation functionality of large UDP datagram to hardware. This will reduce the overhead of stack in fragmenting the large UDP datagram to MTU sized packets 1) Drivers indicate their capability of UFO using dev->features |= NETIF_F_UFO | NETIF_F_HW_CSUM | NETIF_F_SG NETIF_F_HW_CSUM is required for UFO over ipv6. 2) UFO packet will be submitted for transmission using driver xmit routine. UFO packet will have a non-zero value for "skb_shinfo(skb)->ufo_size" skb_shinfo(skb)->ufo_size will indicate the length of data part in each IP fragment going out of the adapter after IP fragmentation by hardware. skb->data will contain MAC/IP/UDP header and skb_shinfo(skb)->frags[] contains the data payload. The skb->ip_summed will be set to CHECKSUM_HW indicating that hardware has to do checksum calculation. Hardware should compute the UDP checksum of complete datagram and also ip header checksum of each fragmented IP packet. For IPV6 the UFO provides the fragment identification-id in skb_shinfo(skb)->ip6_frag_id. The adapter should use this ID for generating IPv6 fragments. Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (forwarded) Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-26[SK_BUFF] kernel-doc: fix skbuff warningsRandy Dunlap
Add kernel-doc to skbuff.h, skbuff.c to eliminate kernel-doc warnings. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-22[SK_BUFF]: ipvs_property field must be copiedJulian Anastasov
IPVS used flag NFC_IPVS_PROPERTY in nfcache but as now nfcache was removed the new flag 'ipvs_property' still needs to be copied. This patch should be included in 2.6.14. Further comments from Harald Welte: Sorry, seems like the bug was introduced by me. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-08[PATCH] gfp flags annotations - part 1Al Viro
- added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-03[NET]: Fix packet timestamping.Herbert Xu
I've found the problem in general. It affects any 64-bit architecture. The problem occurs when you change the system time. Suppose that when you boot your system clock is forward by a day. This gets recorded down in skb_tv_base. You then wind the clock back by a day. From that point onwards the offset will be negative which essentially overflows the 32-bit variables they're stored in. In fact, why don't we just store the real time stamp in those 32-bit variables? After all, we're not going to overflow for quite a while yet. When we do overflow, we'll need a better solution of course. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[NET]: use __read_mostly on kmem_cache_t , DEFINE_SNMP_STAT pointersEric Dumazet
This patch puts mostly read only data in the right section (read_mostly), to help sharing of these data between CPUS without memory ping pongs. On one of my production machine, tcp_statistics was sitting in a heavily modified cache line, so *every* SNMP update had to force a reload. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[NET]: Implement SKB fast cloning.David S. Miller
Protocols that make extensive use of SKB cloning, for example TCP, eat at least 2 allocations per packet sent as a result. To cut the kmalloc() count in half, we implement a pre-allocation scheme wherein we allocate 2 sk_buff objects in advance, then use a simple reference count to free up the memory at the correct time. Based upon an initial patch by Thomas Graf and suggestions from Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[NET]: Store skb->timestamp as offset to a base timestampPatrick McHardy
Reduces skb size by 8 bytes on 64-bit. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[NET]: Kill skb->real_devDavid S. Miller
Bonding just wants the device before the skb_bond() decapsulation occurs, so simply pass that original device into packet_type->func() as an argument. It remains to be seen whether we can use this same exact thing to get rid of skb->input_dev as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[NET]: Remove HIPPI private from skbuff.hStephen Hemminger
This removes the private element from skbuff, that is only used by HIPPI. Instead it uses skb->cb[] to hold the additional data that is needed in the output path from hard_header to device driver. PS: The only qdisc that might potentially corrupt this cb[] is if netem was used over HIPPI. I will take care of that by fixing netem to use skb->stamp. I don't expect many users of netem over HIPPI Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[NET]: Kill skb->tc_classidPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[NET]: Kill skb->listDavid S. Miller
Remove the "list" member of struct sk_buff, as it is entirely redundant. All SKB list removal callers know which list the SKB is on, so storing this in sk_buff does nothing other than taking up some space. Two tricky bits were SCTP, which I took care of, and two ATM drivers which Francois Romieu <romieu@fr.zoreil.com> fixed up. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-08-29[NETFILTER]: reduce netfilter sk_buff enlargementHarald Welte
As discussed at netconf'05, we're trying to save every bit in sk_buff. The patch below makes sk_buff 8 bytes smaller. I did some basic testing on my notebook and it seems to work. The only real in-tree user of nfcache was IPVS, who only needs a single bit. Unfortunately I couldn't find some other free bit in sk_buff to stuff that bit into, so I introduced a separate field for them. Maybe the IPVS guys can resolve that to further save space. Initially I wanted to shrink pkt_type to three bits (PACKET_HOST and alike are only 6 values defined), but unfortunately the bluetooth code overloads pkt_type :( The conntrack-event-api (out-of-tree) uses nfcache, but Rusty just came up with a way how to do it without any skb fields, so it's safe to remove it. - remove all never-implemented 'nfcache' code - don't have ipvs code abuse 'nfcache' field. currently get's their own compile-conditional skb->ipvs_property field. IPVS maintainers can decide to move this bit elswhere, but nfcache needs to die. - remove skb->nfcache field to save 4 bytes - move skb->nfctinfo into three unused bits to save further 4 bytes Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-19[NET]: Fix tc_verd thinko in skb_clone()David S. Miller
It was overwriting the computer n->tc_verd value over and over with skb->tc_verd, by mistake. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08[NET]: Fix sparse warningsVictor Fusco
From: Victor Fusco <victor@cetuc.puc-rio.br> Fix the sparse warning "implicit cast to nocast type" Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[NET]: Remove unused security member in sk_buffThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23[NET]: skb_find_text() - Find a text pattern in skb dataThomas Graf
Finds a pattern in the skb data according to the specified textsearch configuration. Use textsearch_next() to retrieve subsequent occurrences of the pattern. Returns the offset to the first occurrence or UINT_MAX if no match was found. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23[NET]: Zerocopy sequential reading of skb dataThomas Graf
Implements sequential reading for both linear and non-linear skb data at zerocopy cost. The data is returned in chunks of arbitary length, therefore random access is not possible. Usage: from := 0 to := 128 state := undef data := undef len := undef consumed := 0 skb_prepare_seq_read(skb, from, to, &state) while (len = skb_seq_read(consumed, &data, &state)) != 0 do /* do something with 'data' of length 'len' */ if abort then /* abort read if we don't wait for * skb_seq_read() to return 0 */ skb_abort_seq_read(&state) return endif /* not necessary to consume all of 'len' */ consumed += len done Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21[NETFILTER]: Kill nf_debugPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21[NET]: Add missing newline for skb_*_panicPatrick McHardy
While we're at it, lets also replace KERN_INFO by KERN_EMERG to make sure the user gets to see it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-19[NET]: skbuff: remove old NET_CALLER macroStephen Hemminger
Here is a revised alternative that uses BUG_ON/WARN_ON (as suggested by Herbert Xu) to eliminate NET_CALLER. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-19[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memoryHerbert Xu
So here is a patch that introduces skb_store_bits -- the opposite of skb_copy_bits, and uses them to read/write the csum field in rawv6. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!