aboutsummaryrefslogtreecommitdiff
path: root/net/ieee80211/ieee80211_rx.c
AgeCommit message (Collapse)Author
2008-04-08[NET]: Undo code bloat in hot paths due to print_mac().David S. Miller
If print_mac() is used inside of a pr_debug() the compiler can't see that the call is redundant so still performs it even of pr_debug() ends up being a nop. So don't use print_mac() in such cases in hot code paths, use MAC_FMT et al. instead. As noted by Joe Perches, pr_debug() could be modified to handle this better, but that is a change to an interface used by the entire kernel and thus needs to be validated carefully. This here is thus the less risky fix for 2.6.25 Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28ieee80211: beacon->capability is little-endianAl Viro
It's only a debugging printk, so it went unnoticed; still, the fix is trivial, so... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ieee80211: fix misannotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28eliminate byteswapping in struct ieee80211_qos_parametersAl Viro
Make it match the on-the-wire endianness, eliminate byteswapping. The only driver that used this sucker (ipw2200) updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28[IEEE80211]: Use htons() where appropriate.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-01[IEEE80211]: avoid integer underflow for runt rx framesJohn W. Linville
Reported by Chris Evans <scarybeasts@gmail.com>: > The summary is that an evil 80211 frame can crash out a victim's > machine. It only applies to drivers using the 80211 wireless code, and > only then to certain drivers (and even then depends on a card's > firmware not dropping a dubious packet). I must confess I'm not > keeping track of Linux wireless support, and the different protocol > stacks etc. > > Details are as follows: > > ieee80211_rx() does not explicitly check that "skb->len >= hdrlen". > There are other skb->len checks, but not enough to prevent a subtle > off-by-two error if the frame has the IEEE80211_STYPE_QOS_DATA flag > set. > > This leads to integer underflow and crash here: > > if (frag != 0) > flen -= hdrlen; > > (flen is subsequently used as a memcpy length parameter). How about this? Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-28[PATCH] Update my email address from jkmaline@cc.hut.fi to j@w1.fiJouni Malinen
After 13 years of use, it looks like my email address is finally going to disappear. While this is likely to drop the amount of incoming spam greatly ;-), it may also affect more appropriate messages, so let's update my email address in various places. In addition, Host AP mailing list is subscribers-only and linux-wireless can also be used for discussing issues related to this driver which is now shown in MAINTAINERS. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-25[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[SK_BUFF]: Convert skb->end to sk_buff_data_tArnaldo Carvalho de Melo
Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: unions of just one member don't get anything done, kill themArnaldo Carvalho de Melo
Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and skb->mac to skb->mac_header, to match the names of the associated helpers (skb[_[re]set]_{transport,network,mac}_header). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Some more simple skb_reset_network_header conversionsArnaldo Carvalho de Melo
This time of the type: skb->nh.iph = (struct iphdr *)skb->data; That is completely equivalent to: skb->nh.raw = skb->data; Wonder why people love casts... :-) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_reset_network_header(skb)Arnaldo Carvalho de Melo
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_reset_mac_header(skb)Arnaldo Carvalho de Melo
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10[NET] IEEE80211: Fix whitespace errors.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[PATCH] Check ieee80211softmac_auth_resp kmalloc resultArnaldo Carvalho de Melo
And use kmemdup and kzalloc where applicable Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] ieee80211: Drop and count duplicate data frames to remove 'replay ↵Larry Finger
detected' log messages In the SoftMAC version of the IEEE 802.11 stack, not all duplicate messages are detected. For the most part, there is no difficulty; however for TKIP and CCMP encryption, the duplicates result in a "replay detected" log message where the received and previous values of the TSC are identical. This change adds a new variable to the ieee80211_device structure that holds the 'seq_ctl' value for the previous frame. When a new frame repeats the value, the frame is dropped and the appropriate counter is incremented. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] ieee80211: Move IV/ICV stripping into ieee80211_rxDaniel Drake
This patch adds a host_strip_iv_icv flag to ieee80211 which indicates that ieee80211_rx should strip the IV/ICV/other security features from the payload. This saves on some memmove() calls in the driver and seems like something that belongs in the stack as it can be used by bcm43xx, ipw2200, and zd1211rw I will submit the ipw2200 patch separately as it needs testing. This patch also adds some sensible variable reuse (idx vs keyidx) in ieee80211_rx Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-31[PATCH] ieee80211: don't flood log with errorsJiri Benc
The "ieee80211: Workaround malformed 802.11 frames from AP" patch (see http://kernel.org/git/?p=linux/kernel/git/linville/wireless-2.6.git;a=commit;h=f09fc44d8c25f22c4d985bb93857338ed02feac6 ) fixes the problem with some buggy APs but also converts debug message into an error one. This floods the log with errors when you are near such AP (you get a message for every beacon). This patch reverts the error message back to the debug one. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ieee80211: Workaround malformed 802.11 frames from APZhu Yi
Stop processing further but return success when we receive a malformed packet from the AP. We need this patch to workaround some AP bugs. For example, the beacon frames from the Orinoco AP1000 contains an IE (value = 128) with length equals to 8 but the actual frame length is only 7. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27[PATCH] ieee80211: Make ieee80211_rx_any usableDaniel Drake
ieee80211_rx_any is new to 2.6.18-rc1, even though it appears this function was never completed: http://lists.sipsolutions.net/pipermail/softmac-dev/2006-February/000103.html This patch changes ieee80211_rx_any to always claim the skb, which avoids further driver complexity and the possibility of leaking management frames. It also exports the function so that people can actually use it. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27[PATCH] ieee80211: small ERP handling additionsDaniel Drake
This adds a flag to the ieee80211_network structure which indicates whether the stored erp_value is valid (a check against 0 is not enough, since an ERP of 0 is valid and very meaningful). I also added the ERP IE bit-definitions to ieee80211.h. This is needed by some upcoming softmac patches. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] CONFIG_WIRELESS_EXT is neccessary after allHorms
WARNING: /lib/modules/2.6.17-mm2/kernel/net/ieee80211/ieee80211.ko needs unknown symbol wireless_spy_update Someone removed the `#ifdef CONFIG_WIRELESS_EXT' from around the callsite in net/ieee80211/ieee80211_rx.c and didn't update Kconfig appropriately. The offending patchset seems to be 35c14b855f52c49e4f3d078b9532b056005ed321 which is tittled [PATCH] ieee80211: remove unnecessary CONFIG_WIRELESS_EXT checking After a quick look it seems that wireless_spy_update() lives in net/core/wirless.c, and that file is only compiled if CONFIG_WIRELESS_EXT is set. Perhaps this is Kconig work, but in the mean time here is a reversal of the recent change. Signed-Off-By: Horms <horms@verge.net.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] skb used after passing to netif_rx in net/ieee80211/ieee80211_rx.cEric Sesterhenn
this patch fixes coverity id #913. ieee80211_monitor_rx() passes the skb to netif_rx() and we should not reference it any longer. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-24[PATCH] ieee80211: replace debug IEEE80211_WARNING with each own debug macroZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24[PATCH] ieee80211: remove unnecessary CONFIG_WIRELESS_EXT checkingZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-22[PATCH] ieee80211_rx_any: filter out packets, call ieee80211_rx or ↵Denis Vlasenko
ieee80211_rx_mgt Version 2 of the patch. Added checks for version 0 and proper from/to DS bits. Even in promisc mode we won't receive packets from another BSSes. bcm43xx_rx() contains code to filter out packets from foreign BSSes and decide whether to call ieee80211_rx or ieee80211_rx_mgt. This is not bcm specific. Patch adapts that code and adds it to 80211 as ieee80211_rx_any() function. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ieee80211: Don't update network statistics from off-channel packets.James Ketrenos
This patch fixes a problem in the ieee80211 probe response and beacon reception code that would use the packet statistics for a network even if they were received on a channel other than that which the network exists on. This causes a problem in overlapping channels where, for example, a strong AP on channel 2 could have its beacons received on channels 1 and 3, but at much lower signal levels. If scanning was done sequentially, this means the beacon received on channel 3 would update the AP's signal level as being much lower than it really is, which subsequently could cause that AP to be passed over and an alternate AP selected. Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-15Merge branch 'upstream-fixes'John W. Linville
2006-03-15[PATCH] ieee80211: Fix QoS is not active problemHong Liu
Fix QoS is not active even the network and the card is QOS enabled. The problem is we pass the wrong ieee80211_network address to ipw_handle_beacon/ipw_handle_probe_response, thus the ieee80211_network->qos_data.active will not be set, causing the driver not sending QoS frames at all. Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-01Merge branch 'upstream-fixes'Jeff Garzik
2006-02-27[PATCH] ieee80211_rx.c: is_beaconPete Zaitcev
Fix broken is_beacon(). Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-31[PATCH] Add two management functions to ieee80211_rx.cLarry Finger
On my system, I get unhandled management functions corresponding to IEEE80211_STYPE_REASSOC_REQ and IEEE80211_STYPE_ASSOC_REQ. The attached patch adds the logic to pass these requests off to a user stack. The patches to implement these requests in softmac have already been sent to Johannes Berg. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30[PATCH] ieee80211: trivial fix for misplaced ()'sDenis Vlasenko
Patch fixes misplaced (). Diffed against wireless-2.6.git Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30[PATCH] net/: fix the WIRELESS_EXT abuseAdrian Bunk
This patch contains the following changes: - add a CONFIG_WIRELESS_EXT select'ed by NET_RADIO for conditional code - remove the now no longer required #ifdef CONFIG_NET_RADIO from some #include's Based on a patch by Jean Tourrilhes <jt@hpl.hp.com>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30Merge branch 'upstream-fixes'John W. Linville
2006-01-30[PATCH] Typo corrections for ieee80211Larry Finger
This patch, generated against 2.6.16-rc1-git4, corrects two typographical errors in ieee80211_rx.c and adds the facility name to a bare printk. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-27[PATCH] ieee80211: Add 802.11h information element parsingZhu Yi
Added default handlers for various 802.11h DFS and TPC information elements. Moved all information elements into single location (called from two places). Added debug message with information on unparsed IEs if debug_level set. Added code to reset network IBSS DFS information when appropriate. Added code to invoke driver callback for 802.11h ACTION STYPE. Changed a few printk's to IEEE80211_DEBUG_MGMT. Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-27[PATCH] ieee80211: Add 802.11h data type and structuresZhu Yi
Add 802.11h data types and structure definitions to ieee80211.h. Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-27[PATCH] ieee80211: TIM information element parsingZhu Yi
Added partial support of TIM information element parsing Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-27[PATCH] ieee80211: Log if netif_rx() drops the packetZhu Yi
Log to wireless network stats if netif_rx() drops the packet. (also trailing whitespace and Lindent cleanups as part of patch-apply process) Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-27[PATCH] ieee80211: Fix problem with not decrypting broadcast packetsZhu Yi
The code for pulling the key to use for decrypt was correctly using the host_mc_decrypt flag. The code that actually decrypted, however, was based on host_decrypt. This patch changes this behavior. Signed-off-by: Etay Bogner <etay.bogner@gmail.com> Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-14[PATCH] Unlinline a bunch of other functionsArjan van de Ven
Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[NET]: Change memcmp(,,ETH_ALEN) to compare_ether_addr()Kris Katterjohn
This changes some memcmp(one,two,ETH_ALEN) to compare_ether_addr(one,two). Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03[IEEE80211] ipw2200: Simplify multicast checks.Stephen Hemminger
From: Stephen Hemminger <shemminger@osdl.org> is_multicast_ether_addr() accepts broadcast too, so the is_broadcast_ether_addr() calls are redundant. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-07Merge git://git.tuxdriver.com/git/netdev-jwlJeff Garzik