| Age | Commit message (Collapse) | Author |
|---|
|
times out
The ieee80211softmac_call_events function, when called with event type
IEEE80211SOFTMAC_EVENT_ASSOCIATE_TIMEOUT should pass the network as the
third parameter. This patch does that.
Signed-off-by: Joseph Jezak <josejx@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch addresses the "No queue exists" messages commonly seen during
authentication and associating. These appear due to scheduling multiple
authentication attempts on the same network. To prevent this, I added a
flag to stop multiple authentication attempts by the association layer.
I also added a check to the wx handler to see if we're connecting to a
different network than the one already in progress. This scenario was
causing multiple requests on the same network because the network BSSID
was not being updated despite the fact that the ESSID changed.
Signed-off-by: Joseph Jezak <josejx@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
ieee80211softmac_assoc_req
In commit ba9b28d19a3251bb1dfe6a6f8cc89b96fb85f683, routine
ieee80211softmac_capabilities was added to ieee80211softmac_io.c. As
denoted by its name, it completes the capabilities IE that is
needed in the associate and reassociate requests sent to the
AP. For at least one AP, the Linksys WRT54G V5, the capabilities
field must set the 'short preamble' bit or the AP refuses to
associate. In the commit noted above, there is a call to the
new routine from ieee80211softmac_reassoc_req, but not from
ieee80211softmac_assoc_req. This patch fixes that oversight.
As noted in the subject, v2.6.17 is affected. My bcm43xx card had been
unable to associate since I was forced to buy a new AP. I finally was
able to get a packet dump and traced the problem to the capabilities
info. Although I had heard that a patch was "floating around", I had
not seen it before 2.6.17 was released. As this bug does not affect
security and I seem to have the only AP affected by it, there should
be no problem in leaving it for 2.6.18.
Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
this patch fixes coverity id #913. ieee80211_monitor_rx() passes the skb
to netif_rx() and we should not reference it any longer.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
ieee80211_tx_frame
We should preallocate IV+ICV space when encrypting the frame.
Currently no problem shows up just because dev_alloc_skb aligns the
data len to SMP_CACHE_BYTES which can be used for ICV.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
In net/ieee80211/softmac/ieee80211softmac_wx.c, there is a bug that
prints extended sign information whenever the byte value exceeds
0x7f. The following patch changes the printk to use a u8 cast to limit
the output to 2 digits. This bug was first noticed by Dan Williams
<dcbw@redhat.com>. This patch applies to the current master branch
of the Linville tree.
Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch moves the capabilities field computation to a function for clarity
and adds some previously unimplemented bits.
Signed off by Joseph Jezak <josejx@gentoo.org>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-By: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
My router blew up earlier, but exhibited some interesting behaviour during
its dying moments. It was broadcasting beacons but wouldn't respond to
any authentication requests.
I noticed that softmac wasn't playing nice with this, as I couldn't make it try
to connect to other networks after it had timed out authenticating to my ill
router.
To resolve this, I modified the softmac event/notify API to pass the event
code to the callback, so that callbacks being notified from
IEEE80211SOFTMAC_EVENT_ANY masks can make some judgement. In this case, the
ieee80211softmac_assoc callback needs to make a decision based upon whether
the association passed or failed.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch finishes of the partially-complete shared key authentication
implementation in softmac.
The complication here is that we need to encrypt a management frame during
the authentication process. I don't think there are any other scenarios where
this would have to happen.
To get around this without causing too many headaches, we decided to just use
software encryption for this frame. The softmac config option now selects
IEEE80211_CRYPT_WEP so that we can ensure this available. This also involved
a modification to some otherwise unused ieee80211 API.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Got this compiler warning and Johannes Berg <johannes@sipsolutions.net>
wrote:
Yeah, known 'bug', we have that code there but never use it. Feel free
to submit a patch (to John Linville, CC netdev and softmac-dev) to
remove it.
Signed-off-by: Toralf Foerster <toralf.foerster@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch is the first step towards rate control inside softmac.
The txrates substructure has been extended to provide
different fields for different types of packets (management/data,
unicast/multicast). These fields are updated on association to values
compatible with the access point we are associating to.
Drivers can then use the new ieee80211softmac_suggest_txrate() function
call when deciding which rate to transmit each frame at. This is
immensely useful for ZD1211, and bcm can use it too.
The user can still specify a rate through iwconfig, which is matched
for all transmissions (assuming the rate they have specified is in
the rate set required by the AP).
At a later date, we can incorporate automatic rate management into
the ieee80211softmac_recalc_txrates() function.
This patch also removes the mcast_fallback field. Sam Leffler pointed
out that this field is meaningless, because no driver will ever be
retransmitting mcast frames (they are not acked).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Since sec->key_sizes[] is an u8, len can't be < 0.
Spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The 802.11 specs state that deauthenticating also implies
disassociating. This patch implements that, which improve the behaviour
of SIOCSIWMLME.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
|
|
zd1211 with softmac and wpa_supplicant revealed an issue with softmac
and the use of workqueues. Some of the work functions actually
reschedule themselves, so this meant that there could still be
pending work after flush_scheduled_work() had been called during
ieee80211softmac_stop().
This patch introduces a "running" flag which is used to ensure that
rescheduling does not happen in this situation.
I also used this flag to ensure that softmac's hooks into ieee80211 are
non-operational once the stop operation has been started. This simply
makes softmac a little more robust, because I could crash it easily
by receiving frames in the short timeframe after shutting down softmac
and before turning off the ZD1211 radio. (ZD1211 is now fixed as well!)
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
When wpa_supplicant exits, it uses SIOCSIWMLME to request
deauthentication. softmac then tries to reassociate without any user
intervention, which isn't the desired behaviour of this signal.
This change makes softmac only attempt reassociation if the remote
network itself deauthenticated us.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch cleans up the event handling code in ieee80211softmac_event.c and
makes the module slightly smaller by removing some strings that are not used
any more and consolidating some code.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch adds the SIOCSIWMLME wext to softmac, this functionality
appears to be used by wpa_supplicant and is softmac-specific.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Jouni Malinen <jkm@devicescape.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The patch replace the way to export the list of bit rates in scan results
from IWEVCUSTOM to SIOCGIWRATE. It also removes the max_rate item exported
with SIOCGIWRATE since this should be done by userspace.
Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Fix ieee80211 TX code when using WPA+QOS. TKIP/CCMP will use
the TID field of qos_ctl in 802.11 frame header to do encryption. We
cannot ignore this field when doing host encryption and add the qos_ctl
field later.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Fix TKIP MIC verification failure when receiving QoS frames from AP.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
There are some bugs in the current implementation of the SIOCSIWAP wext,
for example that when you do it twice and it fails, it may still try
another access point for some reason. This patch fixes this by introducing
a new flag that tells the association code that the bssid that is in use
was fixed by the user and shouldn't be deviated from.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Make softmac report a scan event when scanning has finished, that way
userspace can wait for the event to happen instead of polling for the
results.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Softmac is sending custom events to userspace already, but it
should _really_ be sending the right WEXT events instead. This
patch fixes that.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Below patch allows using iw_mode auto with softmac. bcm43xx forces managed
so this bug wasn't noticed earlier, but this was one of the problems why
zd1211 didn't work earlier.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Seems we forgot to stop the queue while scanning. Better do that so we
don't transmit packets all the time during background scanning.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Below patch was developed after discussion with Daniel Drake who
mentioned to me that wireless tools expect an EAGAIN return from getscan
so that they can wait for the scan to finish before printing out the
results.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This fixes a spinlock recursion on receiving a reassoc request.
On reassoc, the softmac calls back into the driver. This results in a
driver lock recursion. This schedules the assoc workqueue, instead
of calling it directly.
Probably, we should defer the _whole_ management frame processing
to a tasklet or workqueue, because it does several callbacks into the driver.
That is dangerous.
This fix should go into linus's tree, before 2.6.17 is released, because it
is remote exploitable (DoS by crash).
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
softmac uses wireless extensions, so let it SELECT that config option;
WARNING: "wireless_send_event" [net/ieee80211/softmac/ieee80211softmac.ko] undefined!
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
We don't make much of an attempt to fall back to lower rates, and 54M
just isn't reliable enough for many people. In fact, it's not clear we
even set it to 11M if we're trying to associate with an 802.11b AP.
This patch makes us default to 11M, which ought to work for most people.
When we actually handle dynamic rate adjustment, we can reconsider the
defaults -- but even then, probably it makes as much sense to start at
11M and adjust it upwards as it does to start at 54M and reduce it.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
It currently takes something like 8 seconds to do a scan, because we
spend half a second on each channel. Reduce that time to 20ms per
channel.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The attached patch removes a potential problem from ieee80211_wx.c, by changing the name of routine
ipw2100_translate_scan to ieee80211_translate_scan. The problem is minor as the routine is declared
static; however, if it were made global, it would pollute the namespace.
Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
After a scan, we weren't switching back to the original channel if we
were associated with an AP. So NetworkManager's periodic scans would
disrupt connectivity until the ESSID was manually set again. Fix that.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Remove the function_enter() debugging macros.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Softmac scanning fails because the stop flag is not cleared before
scanning is started. The attached one-line patch fixes this.
Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch removes ieee80211softmac_reassoc which is neither implemented
nor used nor necessary.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch adds handling of reassociation to softmac when the AP
requests it. Patch from Larry Finger.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Recently the deauth packet handler was updated to use a deauth packet
struct (identical to the auth packet struct) and this now gives a
warning. This patch updates the code to properly use a deauth struct and
deauth variable.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch removes a blank line that shouldn't be there and fixes a
spelling error in softmac.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch updates the copyright statements in softmac that I
erroneously added for 2005 only (when we already had 2006).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
ieee80211_rx_mgt
Version 2 of the patch. Added checks for version 0
and proper from/to DS bits. Even in promisc
mode we won't receive packets from another BSSes.
bcm43xx_rx() contains code to filter out packets from
foreign BSSes and decide whether to call ieee80211_rx
or ieee80211_rx_mgt. This is not bcm specific.
Patch adapts that code and adds it to 80211
as ieee80211_rx_any() function.
Signed-off-by: Denis Vlasenko <vda@ilport.com.ua>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
add copyright and license headers to all softmac files
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Properly check return value of ieee80211softmac_alloc_mgt
in ieee80211softmac_disassoc_deauth (patch by Denis Vlasenko)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
