aboutsummaryrefslogtreecommitdiff
path: root/net/ipv4/devinet.c
AgeCommit message (Collapse)Author
2008-11-03net: clean up net/ipv4/devinet.cJianjun Kong
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28net: don't use INIT_RCU_HEADAlexey Dobriyan
call_rcu() will unconditionally rewrite RCU head anyway. Applies to struct neigh_parms struct neigh_table struct net struct cipso_v4_doi struct in_ifaddr struct in_device rt->u.dst Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) ipv4: Add a missing rcu_assign_pointer() in routing cache. [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit xen-netfront: Avoid unaligned accesses to IP header lmc: copy_*_user under spinlock [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
2008-10-16net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)Johannes Berg
Some code here depends on CONFIG_KMOD to not try to load protocol modules or similar, replace by CONFIG_MODULES where more than just request_module depends on CONFIG_KMOD and and also use try_then_request_module in ebtables. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-16sysctl: simplify ->strategyAlexey Dobriyan
name and nlen parameters passed to ->strategy hook are unused, remove them. In general ->strategy hook should know what it's doing, and don't do something tricky for which, say, pointer to original userspace array may be needed (name). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> [ networking bits ] Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02ipv: Re-enable IP when MTU > 68Breno Leitao
Re-enable IP when the MTU gets back to a valid size. This patch just checks if the in_dev is NULL on a NETDEV_CHANGEMTU event and if MTU is valid (bigger than 68), then re-enable in_dev. Also a function that checks valid MTU size was created. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25net: convert BUG_TRAP to generic WARN_ONIlpo Järvinen
Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON() though some might actually be promoted to BUG_ON() but I left that to future. I could make at least one BUILD_BUG_ON conversion. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05netns: add namespace parameter to rt_cache_flushDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-19net: Disable LRO on devices that are forwardingBen Hutchings
Large Receive Offload (LRO) is only appropriate for packets that are destined for the host, and should be disabled if received packets may be forwarded. It can also confuse the GSO on output. Add dev_disable_lro() function which uses the appropriate ethtool ops to disable LRO if enabled. Add calls to dev_disable_lro() in br_add_if() and functions that enable IPv4 and IPv6 forwarding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11net: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10ipv4 addr: Send netlink notification for address label changesThomas Graf
Makes people happy who try to keep a list of addresses up to date by listening to notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-03route: Remove unused ifa_anycast fieldThomas Graf
The field was supposed to allow the creation of an anycast route by assigning an anycast address to an address prefix. It was never implemented so this field is unused and serves no purpose. Remove it. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-02-28[NETNS]: Process inet_select_addr inside a namespace.Denis V. Lunev
The context is available from a network device passed in. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[NETNS]: Enable IPv4 address manipulations inside namespace.Denis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[NETNS]: Process devinet ioctl in the correct namespace.Denis V. Lunev
Add namespace parameter to devinet_ioctl and locate device inside it for state changes. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[NETNS]: Enable inetdev_event notifier.Denis V. Lunev
After all these preparations it is time to enable main IPv4 device initialization routine inside namespace. It is safe do this now. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26[IPV4]: Reset scope when changing addressBjorn Mork
This bug did bite at least one user, who did have to resort to rebooting the system after an "ifconfig eth0 127.0.0.1" typo. Deleting the address and adding a new is a less intrusive workaround. But I still beleive this is a bug that should be fixed. Some way or another. Another possibility would be to remove the scope mangling based on address. This will always be incomplete (are 127/8 the only address space with host scope requirements?) We set the scope to RT_SCOPE_HOST if an IPv4 interface is configured with a loopback address (127/8). The scope is never reset, and will remain set to RT_SCOPE_HOST after changing the address. This patch resets the scope if the address is changed again, to restore normal functionality. Signed-off-by: Bjorn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[NETNS]: Process interface address manipulation routines in the namespace.Denis V. Lunev
The namespace is available when required except rtm_to_ifaddr. Add namespace argument to it. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[IPV4]: Small style cleanup of the error path in rtm_to_ifaddr.Denis V. Lunev
Remove error code assignment inside brackets on failure. The code looks better if the error is assigned before condition check. Also, the compiler treats this better. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[IPV4]: Make struct ipv4_devconf static.Adrian Bunk
struct ipv4_devconf can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to inetdev_by_index.Denis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Process inet_confirm_addr in the correct namespace.Denis V. Lunev
inet_confirm_addr can be called with NULL in_dev from arp_ignore iff scope is RT_SCOPE_LINK. Lets always pass the device and check for RT_SCOPE_LINK scope inside inet_confirm_addr. This let us take network namespace from in_device a need for an additional argument. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Remove extra argument from arp_ignore.Denis V. Lunev
arp_ignore has two arguments: dev & in_dev. dev is used for inet_confirm_addr calling only. inet_confirm_addr, in turn, either gets in_dev from the device passed or iterates over all network devices if the device passed is NULL. It seems logical to directly pass in_dev into inet_confirm_addr. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Should build with CONFIG_SYSCTL=nEric Dumazet
Previous NETNS patches broke CONFIG_SYSCTL=n case Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4] net/ipv4: Use ipv4_is_<type>Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Switch users of ipv4_devconf(_all) to use the pernet onePavel Emelyanov
These are scattered over the code, but almost all the "critical" places already have the proper struct net at hand except for snmp proc showing function and routing rtnl handler. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Switch users of ipv4_devconf_dflt to use the pernet onePavel Emelyanov
They are all collected in the net/ipv4/devinet.c file and mostly use the IPV4_DEVCONF_DFLT macro. So I add the net parameter to it and patch users accordingly. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Move the devinet pointers on the struct netPavel Emelyanov
This is the core. Add all and default pointers on the netns_ipv4 and register a new pernet subsys to initialize them. Also add the ctl_table_header to register the net.ipv4.ip_forward ctl. I don't allocate additional memory for init_net, but use global devinets. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Store the net pointer on devinet's ctl tablesPavel Emelyanov
Some handers and strategies of devinet sysctl tables need to know the net to propagate the ctl change to all the net devices. I use the (currently unused) extra2 pointer on the tables to get it. Holding the reference on the struct net is not possible, because otherwise we'll get a net->ctl_table->net circular dependency. But since the ctl tables are unregistered during the net destruction, this is safe to get it w/o additional protection. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Make __devinet_sysctl_register return an errorPavel Emelyanov
Currently, this function is void, so failures in creating sysctls for new/renamed devices are not reported to anywhere. Fixing this is another complex (needed?) task, but this return value is needed during the namespaces creation to handle the case, when we failed to create "all" and "default" entries. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Cleanup sysctl manipulations in devinet.cPavel Emelyanov
This includes: * moving neigh_sysctl_(un)register calls inside devinet_sysctl_(un)register ones, as they are always called in pairs; * making __devinet_sysctl_unregister() to unregister the ipv4_devconf struct, while original devinet_sysctl_unregister() works with the in_device to handle both - devconf and neigh sysctls; * make stubs for CONFIG_SYSCTL=n case to get rid of in-code ifdefs. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[INET]: Merge sys.net.ipv4.ip_forward and sys.net.ipv4.conf.all.forwardingPavel Emelyanov
AFAIS these two entries should do the same thing - change the forwarding state on ipv4_devconf and on all the devices. I propose to merge the handlers together using ctl paths. The inet_forward_change() is static after this and I move it higher to be closer to other "propagation" helpers and to avoid diff making patches based on { and } matching :) i.e. - make them easier to read. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Use ctl paths to register devinet sysctlsPavel Emelyanov
This looks very much like the patch for neighbors. The path is also located on the stack and is prepared inside the function. This time, the call to the registering function is guarded with the RTNL lock, but I decided to keep it on the stack not to litter the devinet.c file with unneeded names and to make it look similar to the neighbors code. This is also intended to help us with the net namespaces and saves the vmlinux size as well - this time by more than 670 bytes. The difference from the first version is just the patch offsets, that changed due to changes in the patch #2. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Unify and cleanup calls to devinet_sysctl_registerPavel Emelyanov
Currently this call is used to register sysctls for devices and for the "default" confs. The "all" sysctls are registered separately. Besides, the inet_device is passed to this function, but it is not needed there at all - just the device name and ifindex are required. Thanks to Herbert, who noticed, that this call doesn't even require the devconf pointer (the last argument) - all we need we can take from the in_device itself. The fix is to make a __devinet_sysctl_register(), which registers sysctls for all "devices" we need, including "default" and "all" :) The original devinet_sysctl_register() works with struct net_device, not the inet_device, and calls the introduced function, passing the device name and ifindex (to be used as procname and ctl_name) into it. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Cleanup the devinet_sysctl_registerPavel Emelyanov
I moved the call to kmalloc() from the *t declaration into the code (this is confusing when a variable is initialized with the result of some call) and removed unneeded comment near the error path. Just like I did with the neigh ctl-s. Besides, I fixed the goto's and the labels - they were indented with spaces :( Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: Make rtnetlink infrastructure network namespace aware (v3)Denis V. Lunev
After this patch none of the netlink callback support anything except the initial network namespace but the rtnetlink infrastructure now handles multiple network namespaces. Changes from v2: - IPv6 addrlabel processing Changes from v1: - no need for special rtnl_unlock handling - fixed IPv6 ndisc Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: Modify all rtnetlink methods to only work in the initial namespace (v2)Denis V. Lunev
Before I can enable rtnetlink to work in all network namespaces I need to be certain that something won't break. So this patch deliberately disables all of the rtnletlink methods in everything except the initial network namespace. After the methods have been audited this extra check can be disabled. Changes from v1: - added IPv6 addrlabel protection Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-04[INET]: Fix netdev renaming and inet address labelsMark McLoughlin
When re-naming an interface, the previous secondary address labels get lost e.g. $> brctl addbr foo $> ip addr add 192.168.0.1 dev foo $> ip addr add 192.168.0.2 dev foo label foo:00 $> ip addr show dev foo | grep inet inet 192.168.0.1/32 scope global foo inet 192.168.0.2/32 scope global foo:00 $> ip link set foo name bar $> ip addr show dev bar | grep inet inet 192.168.0.1/32 scope global bar inet 192.168.0.2/32 scope global bar:2 Turns out to be a simple thinko in inetdev_changename() - clearly we want to look at the address label, rather than the device name, for a suffix to retain. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[IPV4]: Swap the ifa allocation with the"ipv4_devconf_setall" callPavel Emelyanov
According to Herbert, the ipv4_devconf_setall should be called only when the ifa is added to the device. However, failed ifa allocation may bring things into inconsistent state. Move the call to ipv4_devconf_setall after the ifa allocation. Fits both net-2.6 (with offsets) and net-2.6.25 (cleanly). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[IPV4]: When possible test for IFF_LOOPBACK and not dev == loopback_devEric W. Biederman
Now that multiple loopback devices are becoming possible it makes the code a little cleaner and more maintainable to test if a deivice is th a loopback device by testing dev->flags & IFF_LOOPBACK instead of dev == loopback_dev. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[IPV4]: Remove unnecessary test for the loopback device from inetdev_destroyEric W. Biederman
Currently we never call unregister_netdev for the loopback device so it is impossible for us to reach inetdev_destroy with the loopback device. So the test in inetdev_destroy is unnecessary. Further when testing with my network namespace patches removing unregistering the loopback device and calling inetdev_destroy works fine so there appears to be no reason for avoiding unregistering the loopback device. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Dynamically allocate the loopback device, part 1.Daniel Lezcano
This patch replaces all occurences to the static variable loopback_dev to a pointer loopback_dev. That provides the mindless, trivial, uninteressting change part for the dynamic allocation for the loopback. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-By: Kirill Korotaev <dev@sw.ru> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make the device list and device lookups per namespace.Eric W. Biederman
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make device event notification network namespace safeEric W. Biederman
Every user of the network device notifiers is either a protocol stack or a pseudo device. If a protocol stack that does not have support for multiple network namespaces receives an event for a device that is not in the initial network namespace it quite possibly can get confused and do the wrong thing. To avoid problems until all of the protocol stacks are converted this patch modifies all netdev event handlers to ignore events on devices that are not in the initial network namespace. As the rest of the code is made network namespace aware these checks can be removed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-11[IPV4] devinet: show all addresses assigned to interfaceStephen Hemminger
Bug: http://bugzilla.kernel.org/show_bug.cgi?id=8876 Not all ips are shown by "ip addr show" command when IPs number assigned to an interface is more than 60-80 (in fact it depends on broadcast/label etc presence on each address). Steps to reproduce: It's terribly simple to reproduce: # for i in $(seq 1 100); do ip ad add 10.0.$i.1/24 dev eth10 ; done # ip addr show this will _not_ show all IPs. Looks like the problem is in netlink/ipv4 message processing. This is fix from bug submitter, it looks correct. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[IPV4/IPV6]: Fail registration if inet device construction failsHerbert Xu
Now that netdev notifications can fail, we can use this to signal errors during registration for IPv4/IPv6. In particular, if we fail to allocate memory for the inet device, we can fail the netdev registration. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-08[IPV4]: Do not remove idev when addresses are clearedHerbert Xu
Now that we create idev before addresses are added, it no longer makes sense to remove them when addresses are all deleted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[NETLINK]: Mark netlink policies constPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>