aboutsummaryrefslogtreecommitdiff
path: root/net/ipv6/mcast.c
AgeCommit message (Collapse)Author
2006-02-07[PATCH] net/ipv6/mcast.c NULL noise removalAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-01-24[IPV6] MLDv2: fix change records when transitioning to/from inactiveDavid L Stevens
The following patch fixes these problems in MLDv2: 1) Add/remove "delete" records for sending change reports when addition of a filter results in that filter transitioning to/from inactive. [same as recent IPv4 IGMPv3 fix] 2) Remove 2 redundant "group_type" checks (can't be IPV6_ADDR_ANY within that loop, so checks are always true) 3) change an is_in() "return 0" to "return type == MLD2_MODE_IS_INCLUDE". It should always be "0" to get here, but it improves code locality to not assume it, and if some race allowed otherwise, doing the check would return the correct result. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-17[IPV6]: Preserve procfs IPV6 address output formatYOSHIFUJI Hideaki
Procfs always output IPV6 addresses without the colon characters, and we cannot change that. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13[NET]: Use NIP6_FMT in kernel.hJoe Perches
There are errors and inconsistency in the display of NIP6 strings. ie: net/ipv6/ip6_flowlabel.c There are errors and inconsistency in the display of NIPQUAD strings too. ie: net/netfilter/nf_conntrack_ftp.c This patch: adds NIP6_FMT to kernel.h changes all code to use NIP6_FMT fixes net/ipv6/ip6_flowlabel.c adds NIPQUAD_FMT to kernel.h fixes net/netfilter/nf_conntrack_ftp.c changes a few uses of "%u.%u.%u.%u" to NIPQUAD_FMT for symmetry to NIP6_FMT Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-11[NET]: Remove more unneeded typecasts on *malloc()Kris Katterjohn
This removes more unneeded casts on the return value for kmalloc(), sock_kmalloc(), and vmalloc(). Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-04[IPV6]: Use macro for rwlock_t initialization.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27[IPV6] mcast: Fix multiple issues in MLDv2 reports.David L Stevens
The below "jumbo" patch fixes the following problems in MLDv2. 1) Add necessary "ntohs" to recent "pskb_may_pull" check [breaks all nonzero source queries on little-endian (!)] 2) Add locking to source filter list [resend of prior patch] 3) fix "mld_marksources()" to a) send nothing when all queried sources are excluded b) send full exclude report when source queried sources are not excluded c) don't schedule a timer when there's nothing to report NOTE: RFC 3810 specifies the source list should be saved and each source reported individually as an IS_IN. This is an obvious DOS path, requiring the host to store and then multicast as many sources as are queried (e.g., millions...). This alternative sends a full, relevant report that's limited to number of sources present on the machine. 4) fix "add_grec()" to send empty-source records when it should The original check doesn't account for a non-empty source list with all sources inactive; the new code keeps that short-circuit case, and also generates the group header with an empty list if needed. 5) fix mca_crcount decrement to be after add_grec(), which needs its original value These issues (other than item #1 ;-) ) were all found by Yan Zheng, much thanks! Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-26[IPV6]: Increase default MLD_MAX_MSF to 64.David L Stevens
The existing default of 10 is just way too low. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-02[IGMP]: workaround for IGMP v1/v2 bugDavid Stevens
From: David Stevens <dlstevens@us.ibm.com> As explained at: http://www.cs.ucsb.edu/~krishna/igmp_dos/ With IGMP version 1 and 2 it is possible to inject a unicast report to a client which will make it ignore multicast reports sent later by the router. The fix is to only accept the report if is was sent to a multicast or unicast address. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-02[MCAST]: ip[6]_mc_add_src should be called when number of sources is zeroYan Zheng
And filter mode is exclude. Further explanation by David Stevens: Multicast source filters aren't widely used yet, and that's really the only feature that's affected if an application actually exercises this bug, as far as I can tell. An ordinary filter-less multicast join should still work, and only forwarded multicast traffic making use of filters and doing empty-source filters with the MSFILTER ioctl would be at risk of not getting multicast traffic forwarded to them because the reports generated would not be based on the correct counts. Signed-off-by: Yan Zheng <yanzheng@21cn.com Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-31[MCAST] IPv6: Check packet size when process MulticastYan Zheng
Signed-off-by: Yan Zheng <yanzheng@21cn.com Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-28[MCAST] IPv6: Fix algorithm to compute Querier's Query IntervalYan Zheng
5.1.3. Maximum Response Code The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: If Maximum Response Code < 32768, Maximum Response Delay = Maximum Response Code If Maximum Response Code >=32768, Maximum Response Code represents a floating-point value as follows: 0 1 2 3 4 5 6 7 8 9 A B C D E F +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |1| exp | mant | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Maximum Response Delay = (mant | 0x1000) << (exp+3) 5.1.9. QQIC (Querier's Query Interval Code) The Querier's Query Interval Code field specifies the [Query Interval] used by the Querier. The actual interval, called the Querier's Query Interval (QQI), is represented in units of seconds, and is derived from the Querier's Query Interval Code as follows: If QQIC < 128, QQI = QQIC If QQIC >= 128, QQIC represents a floating-point value as follows: 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ |1| exp | mant | +-+-+-+-+-+-+-+-+ QQI = (mant | 0x10) << (exp + 3) -- rfc3810 #define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value) #define MLDV2_MRC(value) MLDV2_EXP(0x8000, 12, 3, value) Above macro are defined in mcast.c. but 1 << 4 == 0x10 and 1 << 12 == 0x1000. So the result computed by original Macro is larger. Signed-off-by: Yan Zheng <yanzheng@21cn.com> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-05[MCAST] ipv6: Fix address size in grec_sizeYan Zheng
Signed-Off-By: Yan Zheng <yanzheng@21cn.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-14[MCAST]: Fix MCAST_EXCLUDE line dupesDenis Lukianov
This patch fixes line dupes at /ipv4/igmp.c and /ipv6/mcast.c in the 2.6 kernel, where MCAST_EXCLUDE is mistakenly used instead of MCAST_INCLUDE. Signed-off-by: Denis Lukianov <denis@voxelsoft.com> Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08[IPV6]: Fix warning in ip6_mc_msfilter.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08[IPV4]: (INCLUDE,empty)/leave-group equivalence for full-state MSF APIs & ↵David L Stevens
errno fix 1) Adds (INCLUDE, empty)/leave-group equivalence to the full-state multicast source filter APIs (IPv4 and IPv6) 2) Fixes an incorrect errno in the IPv6 leave-group (ENOENT should be EADDRNOTAVAIL) Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08[IPV4]: multicast API "join" issuesDavid L Stevens
1) In the full-state API when imsf_numsrc == 0 errno should be "0", but returns EADDRNOTAVAIL 2) An illegal filter mode change errno should be EINVAL, but returns EADDRNOTAVAIL 3) Trying to do an any-source option without IP_ADD_MEMBERSHIP errno should be EINVAL, but returns EADDRNOTAVAIL 4) Adds comments for the less obvious error return values Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21[NETFILTER]: Restore netfilter assumptions in IPv6 multicastPatrick McHardy
Netfilter assumes that skb->data == skb->nh.ipv6h Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21[IPV6]: multicast join and miscDavid L Stevens
Here is a simplified version of the patch to fix a bug in IPv6 multicasting. It: 1) adds existence check & EADDRINUSE error for regular joins 2) adds an exception for EADDRINUSE in the source-specific multicast join (where a prior join is ok) 3) adds a missing/needed read_lock on sock_mc_list; would've raced with destroying the socket on interface down without 4) adds a "leave group" in the (INCLUDE, empty) source filter case. This frees unneeded socket buffer memory, but also prevents an inappropriate interaction among the 8 socket options that mess with this. Some would fail as if in the group when you aren't really. Item #4 had a locking bug in the last version of this patch; rather than removing the idev->lock read lock only, I've simplified it to remove all lock state in the path and treat it as a direct "leave group" call for the (INCLUDE,empty) case it covers. Tested on an MP machine. :-) Much thanks to HoerdtMickael <hoerdt@clarinet.u-strasbg.fr> who reported the original bug. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!