aboutsummaryrefslogtreecommitdiff
path: root/net/ipv6/udp.c
AgeCommit message (Collapse)Author
2009-10-30net: fix sk_forward_alloc corruptionEric Dumazet
On UDP sockets, we must call skb_free_datagram() with socket locked, or risk sk_forward_alloc corruption. This requirement is not respected in SUNRPC. Add a convenient helper, skb_free_datagram_locked() and use it in SUNRPC Reported-by: Francis Moreau <francis.moro@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30net: Make setsockopt() optlen be unsigned.David S. Miller
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14net: constify struct inet6_protocolAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02ip: Report qdisc packet dropsEric Dumazet
Christoph Lameter pointed out that packet drops at qdisc level where not accounted in SNMP counters. Only if application sets IP_RECVERR, drops are reported to user (-ENOBUFS errors) and SNMP counters updated. IP_RECVERR is used to enable extended reliable error message passing, but these are not needed to update system wide SNMP stats. This patch changes things a bit to allow SNMP counters to be updated, regardless of IP_RECVERR being set or not on the socket. Example after an UDP tx flood # netstat -s ... IP: 1487048 outgoing packets dropped ... Udp: ... SndbufErrors: 1487048 send() syscalls, do however still return an OK status, to not break applications. Note : send() manual page explicitly says for -ENOBUFS error : "The output queue for a network interface was full. This generally indicates that the interface has stopped sending, but may be caused by transient congestion. (Normally, this does not occur in Linux. Packets are just silently dropped when a device queue overflows.) " This is not true for IP_RECVERR enabled sockets : a send() syscall that hit a qdisc drop returns an ENOBUFS error. Many thanks to Christoph, David, and last but not least, Alexey ! Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13inet6: Conversion from u8 to intGerrit Renker
This replaces assignments of the type "int on LHS" = "u8 on RHS" with simpler code. The LHS can express all of the unsigned right hand side values, hence the assigned value can not be negative. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12udpv6: Handle large incoming UDP/IPv6 packets and support software UFOSridhar Samudrala
- validate and forward GSO UDP/IPv6 packets from untrusted sources. - do software UFO if the outgoing device doesn't support UFO. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12udpv6: Fix HW checksum support for outgoing UFO packetsSridhar Samudrala
- add HW checksum support for outgoing large UDP/IPv6 packets destined for a UFO enabled device. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23ipv6: Use correct data types for ICMPv6 type and codeBrian Haley
Change all the code that deals directly with ICMPv6 type and code values to use u8 instead of a signed int as that's the actual data type. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18net: correct off-by-one write allocations reportsEric Dumazet
commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. We need to take into account this offset when reporting sk_wmem_alloc to user, in PROC_FS files or various ioctls (SIOCOUTQ/TIOCOUTQ) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net: skb->dst accessorsEric Dumazet
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ipv6: Fix NULL pointer dereference with time-wait socketsVlad Yasevich
Commit b2f5e7cd3dee2ed721bf0675e1a1ddebb849aee6 (ipv6: Fix conflict resolutions during ipv6 binding) introduced a regression where time-wait sockets were not treated correctly. This resulted in the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000062 IP: [<ffffffff805d7d61>] ipv4_rcv_saddr_equal+0x61/0x70 ... Call Trace: [<ffffffffa033847b>] ipv6_rcv_saddr_equal+0x1bb/0x250 [ipv6] [<ffffffffa03505a8>] inet6_csk_bind_conflict+0x88/0xd0 [ipv6] [<ffffffff805bb18e>] inet_csk_get_port+0x1ee/0x400 [<ffffffffa0319b7f>] inet6_bind+0x1cf/0x3a0 [ipv6] [<ffffffff8056d17c>] ? sockfd_lookup_light+0x3c/0xd0 [<ffffffff8056ed49>] sys_bind+0x89/0x100 [<ffffffff80613ea2>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8020bf9b>] system_call_fastpath+0x16/0x1b Tested-by: Brian Haley <brian.haley@hp.com> Tested-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ipv6: Fix conflict resolutions during ipv6 bindingVlad Yasevich
The ipv6 version of bind_conflict code calls ipv6_rcv_saddr_equal() which at times wrongly identified intersections between addresses. It particularly broke down under a few instances and caused erroneous bind conflicts. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16ipv6: fix the outgoing interface selection order in udpv6_sendmsg()Yang Hongyang
1.When no interface is specified in an IPV6_PKTINFO ancillary data item, the interface specified in an IPV6_PKTINFO sticky optionis is used. RFC3542: 6.7. Summary of Outgoing Interface Selection This document and [RFC-3493] specify various methods that affect the selection of the packet's outgoing interface. This subsection summarizes the ordering among those in order to ensure deterministic behavior. For a given outgoing packet on a given socket, the outgoing interface is determined in the following order: 1. if an interface is specified in an IPV6_PKTINFO ancillary data item, the interface is used. 2. otherwise, if an interface is specified in an IPV6_PKTINFO sticky option, the interface is used. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25netns xfrm: lookup in netnsAlexey Dobriyan
Pass netns to xfrm_lookup()/__xfrm_lookup(). For that pass netns to flow_cache_lookup() and resolver callback. Take it from socket or netdevice. Stub DECnet to init_net. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16udp: Use hlist_nulls in UDP RCU codeEric Dumazet
This is a straightforward patch, using hlist_nulls infrastructure. RCUification already done on UDP two weeks ago. Using hlist_nulls permits us to avoid some memory barriers, both at lookup time and delete time. Patch is large because it adds new macros to include/net/sock.h. These macros will be used by TCP & DCCP in next patch. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath5k/base.c net/8021q/vlan_core.c
2008-11-02udp: Fix the SNMP counter of UDP_MIB_INERRORSWei Yongjun
UDP packets received in udpv6_recvmsg() are not only IPv6 UDP packets, but also have IPv4 UDP packets, so when do the counter of UDP_MIB_INERRORS in udpv6_recvmsg(), we should check whether the packet is a IPv6 UDP packet or a IPv4 UDP packet. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-02udp: Fix the SNMP counter of UDP_MIB_INDATAGRAMSWei Yongjun
If UDP echo is sent to xinetd/echo-dgram, the UDP reply will be received at the sender. But the SNMP counter of UDP_MIB_INDATAGRAMS will be not increased, UDP6_MIB_INDATAGRAMS will be increased instead. Endpoint A Endpoint B UDP Echo request -----------> (IPv4, Dst port=7) <---------- UDP Echo Reply (IPv4, Src port=7) This bug is come from this patch cb75994ec311b2cd50e5205efdcc0696abd6675d. It do counter UDP[6]_MIB_INDATAGRAMS until udp[v6]_recvmsg. Because xinetd used IPv6 socket to receive UDP messages, thus, when received UDP packet, the UDP6_MIB_INDATAGRAMS will be increased in function udpv6_recvmsg() even if the packet is a IPv4 UDP packet. This patch fixed the problem. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-01udp: multicast packets need to check namespaceEric Dumazet
Current UDP multicast delivery is not namespace aware. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29udp: introduce sk_for_each_rcu_safenext()Eric Dumazet
Corey Minyard found a race added in commit 271b72c7fa82c2c7a795bc16896149933110672d (udp: RCU handling for Unicast packets.) "If the socket is moved from one list to another list in-between the time the hash is calculated and the next field is accessed, and the socket has moved to the end of the new list, the traversal will not complete properly on the list it should have, since the socket will be on the end of the new list and there's not a way to tell it's on a new list and restart the list traversal. I think that this can be solved by pre-fetching the "next" field (with proper barriers) before checking the hash." This patch corrects this problem, introducing a new sk_for_each_rcu_safenext() macro. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29udp: RCU handling for Unicast packets.Eric Dumazet
Goals are : 1) Optimizing handling of incoming Unicast UDP frames, so that no memory writes should happen in the fast path. Note: Multicasts and broadcasts still will need to take a lock, because doing a full lockless lookup in this case is difficult. 2) No expensive operations in the socket bind/unhash phases : - No expensive synchronize_rcu() calls. - No added rcu_head in socket structure, increasing memory needs, but more important, forcing us to use call_rcu() calls, that have the bad property of making sockets structure cold. (rcu grace period between socket freeing and its potential reuse make this socket being cold in CPU cache). David did a previous patch using call_rcu() and noticed a 20% impact on TCP connection rates. Quoting Cristopher Lameter : "Right. That results in cacheline cooldown. You'd want to recycle the object as they are cache hot on a per cpu basis. That is screwed up by the delayed regular rcu processing. We have seen multiple regressions due to cacheline cooldown. The only choice in cacheline hot sensitive areas is to deal with the complexity that comes with SLAB_DESTROY_BY_RCU or give up on RCU." - Because udp sockets are allocated from dedicated kmem_cache, use of SLAB_DESTROY_BY_RCU can help here. Theory of operation : --------------------- As the lookup is lockfree (using rcu_read_lock()/rcu_read_unlock()), special attention must be taken by readers and writers. Use of SLAB_DESTROY_BY_RCU is tricky too, because a socket can be freed, reused, inserted in a different chain or in worst case in the same chain while readers could do lookups in the same time. In order to avoid loops, a reader must check each socket found in a chain really belongs to the chain the reader was traversing. If it finds a mismatch, lookup must start again at the begining. This *restart* loop is the reason we had to use rdlock for the multicast case, because we dont want to send same message several times to the same socket. We use RCU only for fast path. Thus, /proc/net/udp still takes spinlocks. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29udp: introduce struct udp_table and multiple spinlocksEric Dumazet
UDP sockets are hashed in a 128 slots hash table. This hash table is protected by *one* rwlock. This rwlock is readlocked each time an incoming UDP message is handled. This rwlock is writelocked each time a socket must be inserted in hash table (bind time), or deleted from this table (close time) This is not scalable on SMP machines : 1) Even in read mode, lock() and unlock() are atomic operations and must dirty a contended cache line, shared by all cpus. 2) A writer might be starved if many readers are 'in flight'. This can happen on a machine with some NIC receiving many UDP messages. User process can be delayed a long time at socket creation/dismantle time. This patch prepares RCU migration, by introducing 'struct udp_table and struct udp_hslot', and using one spinlock per chain, to reduce contention on central rwlock. Introducing one spinlock per chain reduces latencies, for port randomization on heavily loaded UDP servers. This also speedup bindings to specific ports. udp_lib_unhash() was uninlined, becoming to big. Some cleanups were done to ease review of following patch (RCUification of UDP Unicast lookups) Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07inet: Don't lookup the socket if there's a socket attached to the skbKOVACS Krisztian
Use the socket cached in the skb if it's present. Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07inet: Add udplib_lookup_skb() helpersKOVACS Krisztian
To be able to use the cached socket reference in the skb during input processing we add a new set of lookup functions that receive the skb on their argument list. Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-09udp: Drop socket lock for encapsulated packetsHerbert Xu
The socket lock is there to protect the normal UDP receive path. Encapsulation UDP sockets don't need that protection. In fact the locking is deadly for them as they may contain another UDP packet within, possibly with the same addresses. Also the nested bit was copied from TCP. TCP needs it because of accept(2) spawning sockets. This simply doesn't apply to UDP so I've removed it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05MIB: add struct net to UDP6_INC_STATS_BHPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05MIB: add struct net to UDP6_INC_STATS_USERPavel Emelyanov
As simple as the patch #1 in this set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17udp: sk_drops handlingEric Dumazet
In commits 33c732c36169d7022ad7d6eb474b0c9be43a2dc1 ([IPV4]: Add raw drops counter) and a92aa318b4b369091fd80433c80e62838db8bc1c ([IPV6]: Add raw drops counter), Wang Chen added raw drops counter for /proc/net/raw & /proc/net/raw6 This patch adds this capability to UDP sockets too (/proc/net/udp & /proc/net/udp6). This means that 'RcvbufErrors' errors found in /proc/net/snmp can be also be examined for each udp socket. # grep Udp: /proc/net/snmp Udp: InDatagrams NoPorts InErrors OutDatagrams RcvbufErrors SndbufErrors Udp: 23971006 75 899420 16390693 146348 0 # cat /proc/net/udp sl local_address rem_address st tx_queue rx_queue tr tm->when retrnsmt --- uid timeout inode ref pointer drops 75: 00000000:02CB 00000000:0000 07 00000000:00000000 00:00000000 00000000 --- 0 0 2358 2 ffff81082a538c80 0 111: 00000000:006F 00000000:0000 07 00000000:00000000 00:00000000 00000000 --- 0 0 2286 2 ffff81042dd35c80 146348 In this example, only port 111 (0x006F) was flooded by messages that user program could not read fast enough. 146348 messages were lost. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16udp: add struct net argument to udp_hashfnPavel Emelyanov
Every caller already has this one. The new argument is currently unused, but this will be fixed shortly. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16udp: provide a struct net pointer for __udp[46]_lib_mcast_deliverPavel Emelyanov
They both calculate the hash chain, but currently do not have a struct net pointer, so pass one there via additional argument, all the more so their callers already have such. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16udp: introduce a udp_hashfn functionPavel Emelyanov
Currently the chain to store a UDP socket is calculated with simple (x & (UDP_HTABLE_SIZE - 1)). But taking net into account would make this calculation a bit more complex, so moving it into a function would help. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-14net: change proto destroy method to return voidBrian Haley
Change struct proto destroy function pointer to return void. Noticed by Al Viro. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11net: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-05[IPV6]: inet_sk(sk)->cork.opt leakDenis V. Lunev
IPv6 UDP sockets wth IPv4 mapped address use udp_sendmsg to send the data actually. In this case ip_flush_pending_frames should be called instead of ip6_flush_pending_frames. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-05[IPV6] NETNS: Handle ancillary data in appropriate namespace.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-05[IPV6] UDP: Possible dst leak in udpv6_sendmsg.YOSHIFUJI Hideaki
ip6_sk_dst_lookup returns held dst entry. It should be released on all paths beyond this point. Add missed release when up->pending is set. Bug report and initial patch by Denis V. Lunev <den@openvz.org>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Denis V. Lunev <den@openvz.org>
2008-04-12[IPv6]: Change IPv6 unspecified destination address to ::1 for raw and ↵Brian Haley
un-connected sockets This patch fixes a difference between IPv4 and IPv6 when sending packets to the unspecified address (either 0.0.0.0 or ::) when using raw or un-connected UDP sockets. There are two cases where IPv6 either fails to send anything, or sends with the destination address set to ::. For example: --> ping -c1 0.0.0.0 PING 0.0.0.0 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.032 ms --> ping6 -c1 :: PING ::(::) 56 data bytes ping: sendmsg: Invalid argument Doing a sendto("0.0.0.0") reveals: 10:55:01.495090 IP localhost.32780 > localhost.7639: UDP, length 100 Doing a sendto("::") reveals: 10:56:13.262478 IP6 fe80::217:8ff:fe7d:4718.32779 > ::.7639: UDP, length 100 If you issue a connect() first in the UDP case, it will be sent to ::1, similar to what happens with TCP. This restores the BSD-ism. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-28[UDP]: Remove owner from udp_seq_afinfo.Denis V. Lunev
Move it to udp_seq_afinfo->seq_fops as should be. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-28[UDP]: Place file operations directly into udp_seq_afinfo.Denis V. Lunev
No need to have separate never-used variable. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-28[UDP]: Move seq_ops from udp_iter_state to udp_seq_afinfo.Denis V. Lunev
No need to create seq_operations for each instance of 'netstat'. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-28[SOCK]: Drop inuse pcounter from struct proto (v2).Pavel Emelyanov
An uppercut - do not use the pcounter on struct proto. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25[IPV6]: Optimize hop-limit determination.YOSHIFUJI Hideaki
Last part of hop-limit determination is always: hoplimit = dst_metric(dst, RTAX_HOPLIMIT); if (hoplimit < 0) hoplimit = ipv6_get_hoplimit(dst->dev). Let's consolidate it as ip6_dst_hoplimit(dst). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-22[UDP]: Make full use of proto.h.udp_hash innovation.Pavel Emelyanov
After this we have only udp_lib_get_port to get the port and two stubs for ipv4 and ipv6. No difference in udp and udplite except for initialized h.udp_hash member. I tried to find a graceful way to drop the only difference between udp_v4_get_port and udp_v6_get_port (i.e. the rcv_saddr comparison routine), but adding one more callback on the struct proto didn't appear such :( Maybe later. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-21[NETNS][IPV6] udp6 - make proc per namespaceDaniel Lezcano
The proc init/exit functions take a new network namespace parameter in order to register/unregister /proc/net/udp6 for a namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-07[NETNS][IPV6] mcast - handle several network namespaceDaniel Lezcano
This patch make use of the network namespace information at the right places to handle the multicast for several network namespaces. It makes the socket control to be per namespace too. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06[UDP]: Revert udplite and code split.David S. Miller
This reverts commit db1ed684f6c430c4cdad67d058688b8a1b5e607c ("[IPV6] UDP: Rename IPv6 UDP files."), commit 8be8af8fa4405652e6c0797db5465a4be8afb998 ("[IPV4] UDP: Move IPv4-specific bits to other file.") and commit e898d4db2749c6052072e9bc4448e396cbdeb06a ("[UDP]: Allow users to configure UDP-Lite."). First, udplite is of such small cost, and it is a core protocol just like TCP and normal UDP are. We spent enormous amounts of effort to make udplite share as much code with core UDP as possible. All of that work is less valuable if we're just going to slap a config option on udplite support. It is also causing build failures, as reported on linux-next, showing that the changeset was not tested very well. In fact, this is the second build failure resulting from the udplite change. Finally, the config options provided was a bool, instead of a modular option. Meaning the udplite code does not even get build tested by allmodconfig builds, and furthermore the user is not presented with a reasonable modular build option which is particularly needed by distribution vendors. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[IPV6] UDP: Rename IPv6 UDP files.YOSHIFUJI Hideaki
Rename net/ipv6/udp.c to net/ipv6/udp_ipv6.c Rename net/ipv6/udplite.c to net/ipv6/udplite_ipv6.c. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 14:04:04 +0000