aboutsummaryrefslogtreecommitdiff
path: root/net/ipv6
AgeCommit message (Collapse)Author
2007-04-28[IPV6]: Fix slab corruption running ip6sicEric Sesterhenn
From: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-28[IPV6]: Track device renames in snmp6.Stephen Hemminger
When network device's are renamed, the IPV6 snmp6 code gets confused. It doesn't track name changes so it will OOPS when network device's are removed. The fix is trivial, just unregister/re-register in notify handler. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27[IPV6]: Fix thinko in ipv6_rthdr_rcv() changes.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[NET]: SPIN_LOCK_UNLOCKED cleanup in drivers/atm, netMilind Arun Choudhary
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6] NDISC: Unify main process of sending ND messages.YOSHIFUJI Hideaki
Because ndisc_send_na(), ndisc_send_ns() and ndisc_send_rs() are almost identical, so let's unify their common part. With gcc (GCC) 3.3.5 (Debian 1:3.3.5-13) on i386, Before: text data bss dec hex filename 14689 364 24 15077 3ae5 net/ipv6/ndisc.o After: text data bss dec hex filename 12317 364 24 12705 31a1 net/ipv6/ndisc.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-04-25[IPV6] XFRM: Use ip6addr_any where applicable.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-04-25[IPV6]: Export in6addr_any for future use.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-04-25[IPV6] SIT: Unify code path to get hash array index.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-04-25[IPV6]: Fix Makefile thinko.David S. Miller
obj-$(CONFIG_PROC_FS) --> ipv6-$(CONFIG_PROC_FS) Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6]: Consolidate common SNMP codeHerbert Xu
This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6] SNMP: Use put_unaligned() instead of memcpy().YOSHIFUJI Hideaki
Hint from David Miller <davem@davemloft.net>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6] SNMP: Fix several warnings without procfs.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-04-25[IPV6] SNMP: Avoid unaligned accesses.YOSHIFUJI Hideaki
Because stats pointer may not be aligned for u64, use memcpy to fill u64 values. Issue reported by David Miller <davem@davemloft.net>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-04-25[NET]: cleanup extra semicolonsStephen Hemminger
Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6] SNMP: Export statistics via netlink without CONFIG_PROC_FS.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6] SNMP: Move some statistic bits to net/ipv6/proc.c.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6] SNMP: Netlink interface.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[INET]: Add IP(V6)_PMTUDISC_RPOBEJohn Heffner
Add IP(V6)_PMTUDISC_PROBE value for IP(V6)_MTU_DISCOVER. This option forces us not to fragment, but does not make use of the kernel path MTU discovery. That is, it allows for user-mode MTU probing (or, packetization-layer path MTU discovery). This is particularly useful for diagnostic utilities, like traceroute/tracepath. Signed-off-by: John Heffner <jheffner@psc.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6]: MTU discovery check in ip6_fragment()John Heffner
Adds a check in ip6_fragment() mirroring ip_fragment() for packets that we can't fragment, and sends an ICMP Packet Too Big message in response. Signed-off-by: John Heffner <jheffner@psc.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[RTNETLINK]: Remove unnecessary locking in dump callbacksPatrick McHardy
Since we're now holding the rtnl during the entire dump operation, we can remove additional locking for rtnl protected data. This patch does that for all simple cases (dev_base_lock for dev_base walking, RCU protection for FIB rule dumping). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NETLINK]: Switch cb_lock spinlock to mutex and allow to override itPatrick McHardy
Switch cb_lock to mutex and allow netlink kernel users to override it with a subsystem specific mutex for consistent locking in dump callbacks. All netlink_dump_start users have been audited not to rely on any side-effects of the previously used spinlock. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NETFILTER]: {eb,ip6,ip}t_LOG: remove remains of LOG target overloadingPatrick McHardy
All LOG targets always use their internal logging function nowadays, so remove the incorrect error message and handle real errors (!= -EEXIST) by failing to load. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NET]: Treat CHECKSUM_PARTIAL as CHECKSUM_UNNECESSARYHerbert Xu
When a transmitted packet is looped back directly, CHECKSUM_PARTIAL maps to the semantics of CHECKSUM_UNNECESSARY. Therefore we should treat it as such in the stack. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NET]: Use csum_start offset instead of skb_transport_headerHerbert Xu
The skb transport pointer is currently used to specify the start of the checksum region for transmit checksum offload. Unfortunately, the same pointer is also used during receive side processing. This creates a problem when we want to retransmit a received packet with partial checksums since the skb transport pointer would be overwritten. This patch solves this problem by creating a new 16-bit csum_start offset value to replace the skb transport header for the purpose of checksums. This offset is calculated from skb->head so that it does not have to change when skb->data changes. No extra space is required since csum_offset itself fits within a 16-bit word so we can use the other 16 bits for csum_start. For backwards compatibility, just before we push a packet with partial checksums off into the device driver, we set the skb transport header to what it would have been under the old scheme. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[XFRM]: Optimize MTU calculationPatrick McHardy
Replace the probing based MTU estimation, which usually takes 2-3 iterations to find a fitting value and may underestimate the MTU, by an exact calculation. Also fix underestimation of the XFRM trailer_len, which causes unnecessary reallocations. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[XFRM]: esp: fix skb_tail_pointer conversion bugPatrick McHardy
Fix incorrect switch of "trailer" skb by "skb" during skb_tail_pointer conversion: - *(u8*)(trailer->tail - 1) = top_iph->protocol; + *(skb_tail_pointer(skb) - 1) = top_iph->protocol; - *(u8 *)(trailer->tail - 1) = *skb_network_header(skb); + *(skb_tail_pointer(skb) - 1) = *skb_network_header(skb); Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6] FIB6RULE: Find source address during looking up route.YOSHIFUJI Hideaki
When looking up route for destination with rules with source address restrictions, we may need to find a source address for the traffic if not given. Based on patch from Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[NET]: Allow forwarding of ip_summed except CHECKSUM_COMPLETEHerbert Xu
Right now Xen has a horrible hack that lets it forward packets with partial checksums. One of the reasons that CHECKSUM_PARTIAL and CHECKSUM_COMPLETE were added is so that we can get rid of this hack (where it creates two extra bits in the skbuff to essentially mirror ip_summed without being destroyed by the forwarding code). I had forgotten that I've already gone through all the deivce drivers last time around to make sure that they're looking at ip_summed == CHECKSUM_PARTIAL rather than ip_summed != 0 on transmit. In any case, I've now done that again so it should definitely be safe. Unfortunately nobody has yet added any code to update CHECKSUM_COMPLETE values on forward so we I'm setting that to CHECKSUM_NONE. This should be safe to remove for bridging but I'd like to check that code path first. So here is the patch that lets us get rid of the hack by preserving ip_summed (mostly) on forwarded packets. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[INET]: Use jhash + random secret for ehash.David S. Miller
The days are gone when this was not an issue, there are folks out there with huge bot networks that can be used to attack the established hash tables on remote systems. So just like the routing cache and connection tracking hash, use Jenkins hash with random secret input. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NETFILTER]: Use setup_timerPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NETFILTER]: Remove changelogs and CVS IDsPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NET] rules: Unified rules dumpingThomas Graf
Implements a unified, protocol independant rules dumping function which is capable of both, dumping a specific protocol family or all of them. This speeds up dumping as less lookups are required. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPv6]: Use rtnl registration interfaceThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF] ipv6: Use skb_network_offset in some more placesArnaldo Carvalho de Melo
So that we reduce the number of direct accesses to skb->data. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[NETLINK]: Introduce nlmsg_hdr() helperArnaldo Carvalho de Melo
For the common "(struct nlmsghdr *)skb->data" sequence, so that we reduce the number of direct accesses to skb->data and for consistency with all the other cast skb member helpers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: unions of just one member don't get anything done, kill themArnaldo Carvalho de Melo
Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and skb->mac to skb->mac_header, to match the names of the associated helpers (skb[_[re]set]_{transport,network,mac}_header). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_network_header_lenArnaldo Carvalho de Melo
For the common sequence "skb->h.raw - skb->nh.raw", similar to skb->mac_len, that is precalculated tho, don't think we need to bloat skb with one more member, so just use this new helper, reducing the number of non-skbuff.h references to the layer headers even more. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Use the helpers to get the layer header pointerArnaldo Carvalho de Melo
Some more cases... Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Some more layer header conversionsArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: More skb_put related skb_reset_transport_headerArnaldo Carvalho de Melo
This time we have to set it to skb->tail that is not anymore equal to skb->data, so we either add a new helper or just add the skb->tail - skb->data offset, for now do the later. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6]: Reset the network header in ip6_nd_hdrArnaldo Carvalho de Melo
ip6_nd_hdr is always called immediately after a alloc_skb + skb_reserve sequence, i.e. when skb->tail is equal to skb->data, making it correct to use skb_reset_network_header(). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NETFILTER]: nf_conntrack: add nf_copy() to safely copy members in skbYasuyuki Kozakai
This unifies the codes to copy netfilter related datas. Before copying, nf_copy() puts original members in destination skb. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_transport_header(skb)Arnaldo Carvalho de Melo
For the places where we need a pointer to the transport header, it is still legal to touch skb->h.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: More skb_reset_transport_header conversionsArnaldo Carvalho de Melo
These are a bit more subtle, they are of this type: - skb->h.raw = payload; __skb_pull(skb, payload - skb->data); + skb_reset_transport_header(skb); __skb_pull results in: skb->data = skb->data + payload - skb->data; skb->data = payload; So after __skb_pull we have skb->data pointing to payload and we can just call skb_reset_transport_header(skb), that will do: skb->h.raw = payload; The others are similar, allowing us to get rid of some more cases where a pointer was being attributed to the layer headers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce ipipv6_hdr(), remove skb->h.ipv6hArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce ipip_hdr(), remove skb->h.ipiphArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce tcp_hdr(), remove skb->h.thArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>