aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211/debugfs_sta.c
AgeCommit message (Collapse)Author
2009-01-29mac80211: 802.11w - STA flag for MFPJouni Malinen
Add flags for setting STA entries and struct ieee80211_if_sta to indicate whether management frame protection (MFP) is used. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: minor code cleanupsJohannes Berg
Nothing very interesting, some checkpatch inspired stuff, some other things. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: remove aggregation status write support from debugfsJohannes Berg
This code uses static variables and thus cannot be kept. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-27mac80211: convert to %pM away from print_macJohannes Berg
Also remove a few stray DECLARE_MAC_BUF that were no longer used at all. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-14mac80211: fix debugfs lockupJohannes Berg
When debugfs_create_dir fails, sta_info_debugfs_add_work will not terminate because it will find the same station again and again. This is possible whenever debugfs fails for whatever reason; one reason is a race condition in mac80211, unfortunately we cannot do much about it, so just document it, it just means some station may be missing from debugfs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Robin Holt <holt@sgi.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24mac80211: make master iface not wirelessJohannes Berg
There's no need to register the master netdev with cfg80211, in fact, this is quite dangerous and lead to having to add checks for the master interface all over the config handlers. This patch removes the "ieee80211_ptr" from the master iface in favour of having a small netdev_priv() associated with the master interface that stores the ieee80211_local pointer. Because of this, a lot of code in the configuration handlers can go away. To make this patch easier to verify I have also removed a number of wiphy_priv() calls in favour of getting the sdata first and then the local pointer from that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15mac80211: share STA information with driverJohannes Berg
This patch changes mac80211 to share some more data about stations with drivers. Should help iwlwifi and ath9k when they get around to updating, and might also help with implementing rate control algorithms without internals. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22replace net_device arguments with ieee80211_{local,sub_if_data} as appropriateJasper Bryant-Greene
This patch replaces net_device arguments to mac80211 internal functions with ieee80211_{local,sub_if_data} as appropriate. It also does the same for many 802.11s mesh functions, and changes the mesh path table to be indexed on sub_if_data rather than net_device. If the mesh part needs to be a separate patch let me know, but since mesh uses a lot of mac80211 functions which were being converted anyway, the changes go hand-in-hand somewhat. This patch probably does not convert all the functions which could be converted, but it is a large chunk and followup patches will be provided. Signed-off-by: Jasper Bryant-Greene <jasper@amiton.co.nz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: remove channel use statisticsJohannes Berg
The useless channel use statistics are quite a lot of code, currently use integer divisions in the packet fast path, are rather inaccurate since they do not account for retries and finally nobody even cares. Hence, remove them completely. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-14mac80211: use hardware flags for signal/noise unitsBruno Randolf
trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-14mac80211: proper STA info lockingJohannes Berg
As discussed earlier, we can unify locking in struct sta_info and use just a single spinlock protecting all members of the structure that need protection. Many don't, but one of the especially bad ones is the 'flags' member that can currently be clobbered when RX and TX is being processed on different CPUs at the same time. Because having four spinlocks for different, mostly exclusive parts of a single structure is overkill, this patch also kills the ampdu and mesh plink spinlocks and uses just a single one for everything. Because none of the spinlocks are nested, this is safe. It remains to be seen whether or not we should make the sta flags use atomic bit operations instead, for now though this is a safe thing and using atomic operations instead will be very simple using the new static inline functions this patch introduces for accessing sta->flags. Since spin_lock_bh() is used with this lock, there shouldn't be any contention even if aggregation is enabled at around the same time as both requires frame transmission/reception which is in a bh context. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Tomas Winkler <tomasw@gmail.com> Cc: Ron Rindjunsky <ron.rindjunsky@intel.com> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-07mac80211: QoS related cleanupsJohannes Berg
This * makes the queue number passed to drivers a u16 (as it will be with skb_get_queue_mapping) * removes the useless queue number defines * splits hw->queues into hw->queues/ampdu_queues * removes the debugfs files for per-queue counters * removes some dead QoS code * removes the beacon queue configuration for IBSS so that the drivers now never get a queue number bigger than (hw->queues + hw->ampdu_queues - 1) for tx and only in the range 0..hw->queues-1 for conf_tx. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: make debugfs files root-onlyJohannes Berg
Unfortunately, debugfs can be made to access invalid memory by open()ing a file and then waiting until the corresponding debugfs file has been removed (and, probably, the underlying object.) That could be exploited by any user if the user is able to open debugfs files and can cause networking devices, STA entries or similar to disappear which is quite easy to do. Hence, all debugfs files should be root-only. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27mac80211: A-MPDU MLME use dynamic allocationRon Rindjunsky
This patch alters the A-MPDU MLME in sta_info to use dynamic allocation, thus drastically improving memory usage - from a constant ~2 Kbyte in the previous (static) allocation to a lower limit of ~200 Byte and an upper limit of ~2 Kbyte. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27mac80211: fix wrong Rx A-MPDU control via debugfsRon Rindjunsky
This patch eliminate the use of buf_size as a trigger in favor of a new flag to control Rx A-MPDU sessions through debugfs Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: clean up sta_info and document lockingJohannes Berg
This patch cleans up the sta_info struct and documents how each set of variables is locked. Notably, flags locking is completely missing. It also adds kernel-doc for some (but not all yet) members of the struct. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: RCU-ify STA info structure accessJohannes Berg
This makes access to the STA hash table/list use RCU to protect against freeing of items. However, it's not a true RCU, the copy step is missing: whenever somebody changes a STA item it is simply updated. This is an existing race condition that is now somewhat understandable. This patch also fixes the race key freeing vs. STA destruction by making sure that sta_info_destroy() is always called under RTNL and frees the key. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: remove STA infos last_ack stuffJohannes Berg
These things aren't used and the only possible use is within rate control algorithms, however those can, if they need it, keep track of it in their private data. last_ack_ms isn't even updated so completely useless. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: fix debugfs_sta print_mac() warningJohannes Berg
When print_mac() was marked as __pure to avoid emitting a function call in pr_debug() scenarios, a warning in this code surfaced since it relies on the fact that the buffer is modified and doesn't use the return value. This patch makes it use the return value instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: remove sta TIM flag, fix expiry TIM handlingJohannes Berg
The TIM flag that is kept in each station's info is completely useless, there's no code (aside from the debugfs display code) checking it, hence it can be removed. While doing that, I noticed that the TIM handling is broken when buffered frames expire, so fix that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: remove port control enable switch, clean up sta flagsJohannes Berg
This patch removes the 802.1X port acess control enable flag since it is not required. Instead, set the authorized flag for each station that we normally communicate with (WDS peers, IBSS peers and APs we're associated to) and require hostapd to set the authorized flag for all stations when port control is not enabled. Also, since I was working in that area, this documents station flags and removes the unused "permanent" one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29cfg80211 API for channels/bitrates, mac80211 and driver conversionJohannes Berg
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: A-MPDU add debugfs supportRon Rindjunsky
This patch adds A-MPDU status report per STA to the debugfs. The option to de/activate A-MPDU through debugfs is also present. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[MAC80211]: kill vlan_idJohannes Berg
Each station has a vlan_id that is useless. Remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: remove fake set_key() callJohannes Berg
Remove adding a fake key with a NONE key algorithm for each associated STA. If we have hardware with such TX filtering we should probably extend the sta_table_notification() callback with the sta information instead; the fact that it's treated as a key for some atheros hardware shouldn't bother the stack. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-06[PATCH] mac80211: Fix sparse error for sta_last_seq_ctrl_readZhu Yi
Fix sparse error for sta_last_seq_ctrl_read. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-05[MAC80211]: Add debugfs attributes.Jiri Benc
Export various mac80211 internal variables through debugfs. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>