aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2009-06-26mac80211: Use rcu_barrier() on unload.Jesper Dangaard Brouer
The mac80211 module uses rcu_call() thus it should use rcu_barrier() on module unload. The rcu_barrier() is placed in mech.c ieee80211_stop_mesh() which is invoked from ieee80211_stop() in case vif.type == NL80211_IFTYPE_MESH_POINT. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15mac80211: fix wext bssid/ssid settingJohannes Berg
When changing to a new BSSID or SSID, the code in ieee80211_set_disassoc() needs to have the old data still valid to be able to disconnect and clean up properly. Currently, however, the old data is thrown away before ieee80211_set_disassoc() is ever called, so fix that by calling the function _before_ the old data is overwritten. This is (one of) the issue(s) causing mac80211 to hold cfg80211's BSS structs forever, and them thus being returned in scan results after they're long gone. http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2015 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15mac80211: disconnect when user changes channelJohannes Berg
If we do not disconnect when a channel switch is requested, we end up eventually detection beacon loss from the AP and then disconnecting, without ever really telling the AP, so we might just as well disconnect right away. Additionally, this fixes a problem with iwlwifi where the driver will clear some internal state on channel changes like this and then get confused when we actually go clear that state from mac80211. It may look like this patch drops the no-IBSS check, but that is already handled by cfg80211 in the wext handler it provides for IBSS (cfg80211_ibss_wext_siwfreq). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15mac80211: add queue debugfs fileJohannes Berg
I suspect that some driver bugs can cause queues to be stopped while they shouldn't be, but it's hard to find out whether that is the case or not without having any visible information about the queues. This adds a file to debugfs that allows us to see the queues' statuses. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15mac80211: Do not try to associate with an empty SSIDJouni Malinen
It looks like some programs (e.g., NM) are setting an empty SSID with SIOCSIWESSID in some cases. This seems to trigger mac80211 to try to associate with an invalid configuration (wildcard SSID) which will result in failing associations (or odd issues, potentially including kernel panic with some drivers) if the AP were to actually accept this anyway). Only start association process if the SSID is actually set. This speeds up connection with NM in number of cases and avoids sending out broken association request frames. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-13net: use symbolic values for ndo_start_xmit() return codesPatrick McHardy
Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively. 0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases where its in direct proximity to one of the other values. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10mac80211: disable PS while probing APJohannes Berg
When associated, but probing the AP because we detected beacon loss, we need to disable powersave to be able to receive the probe response. Change the code to do that by checking whether we're trying to probe when determining the possibility of going into PS, and recalculate the PS ability at the necessary spots. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10mac80211: disable moving between PS modes during scanLuis R. Rodriguez
We don't want to trigger moving between PS mode during scan, because then we will sometimes end up sending nullfunc frames during scan. We're supposed to only send one prior to scan and after scan. This fixes an oops which occured due to an assert in ath9k: http://marc.info/?l=linux-wireless&m=124277331319024 The assert was happening because the rate control algorithm figures it should find at least one valid dual stream or single stream rate. Since we allow mac80211 to send nullfunc frames during scan and dynamic PS was enabled at times we ended up trying to send nullfunc frames for the target sta on the wrong band for which we have no valid rate to communicate with it. This breaks the assumptions in rate control. We determine we also need to disable moving between PS modes when not associated so lets just add that now as well, and we should not have a ps_sdata when that interface cannot actually go into PS because it's not associated. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10mac80211: clean up return value of __ieee80211_parse_tx_radiotapJohannes Berg
The return type has more than two values, but it can validly only ever return TX_DROP and TX_CONTINUE, so use a bool instead of ieee80211_tx_result. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10mac80211: don't use master netdev nameJohannes Berg
Always use the wiphy name instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10mac80211: Fix the way ADDBA request count being modifiedVasanthakumar Thiagarajan
addba_req_num[tid] is supposed to have the count of consecutive addba request attempts on 'tid' which failed. This count is checked against a retry threshold (3 times) before starting the addba negotiation. This patch fixes the way this addba count is incremented/reset and thereby avoids indefinite addba attempts. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10mac80211: do not pass PS frames out of mac80211 againJohannes Berg
In order to handle powersave frames properly we had needed to pass these out to the device queues again, and introduce the skb->requeue bit. This, however, also has unnecessary overhead by needing to 'clean up' already tried frames, and this clean-up code is also buggy when software encryption is used. Instead of sending the frames via the master netdev queue again, simply put them into the pending queue. This also fixes a problem where frames for that particular station could be reordered when some were still on the software queues and older ones are re-injected into the software queue after them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10mac80211 : fix unaligned rx skbmatthieu castet
mac80211 is checking is the skb is aligned on 32 bit boundary. But it is checking against ethernet header, whereas Linux expect IP header aligned. And ethernet ether size is 6*2+2=14, so aligning ethernet header make IP header unaligned. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10mac80211: fix minstrel single-rate memory corruptionBob Copeland
The minstrel rate controller periodically looks up rate indexes in a sampling table. When accessing a specific row and column, minstrel correctly does a bounds check which, on the surface, appears to handle the case where mi->n_rates < 2. However, mi->sample_idx is actually defined as an unsigned, so the right hand side is taken to be a huge positive number when negative, and the check will always fail. Consequently, the RC will overrun the array and cause random memory corruption when communicating with a peer that has only a single rate. The max value of mi->sample_idx is around 25 so casting to int should have no ill effects. Without the change, uptime is a few minutes under load with an AP that has a single hard-coded rate, and both the AP and STA could potentially crash. With the change, both lasted 12 hours with a steady load. Thanks to Ognjen Maric for providing the single-rate clue so I could reproduce this. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=12490 on the regression list (also http://bugzilla.kernel.org/show_bug.cgi?id=13000). Cc: stable@kernel.org Reported-by: Sergey S. Kostyliov <rathamahata@gmail.com> Reported-by: Ognjen Maric <ognjen.maric@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: fix Kconfig for users of cfg80211Johannes Berg
* iwm doesn't depend on cfg80211 or wireless extensions * rndis wlan selects cfg80211 - needs to depend * mac80211 selects cfg80211 - needs to depend Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03mac80211: removed unused variable in ieee80211_tx()Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03mac80211: extend sta kdoc - explain when they are addedLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: add rfkill supportJohannes Berg
To be easier on drivers and users, have cfg80211 register an rfkill structure that drivers can access. When soft-killed, simply take down all interfaces; when hard-killed the driver needs to notify us and we will take down the interfaces after the fact. While rfkilled, interfaces cannot be set UP. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: move txpower wext from mac80211Johannes Berg
This patch introduces new cfg80211 API to set the TX power via cfg80211, puts the wext code into cfg80211 and updates mac80211 to use all that. The -ENETDOWN bits are a hack but will go away soon. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03mac80211: handle -EALREADY on cfg80211 op assoc reqLuis R. Rodriguez
When the SME requests to associate to an open AP ieee80211_sta_set_extra_ie() can be called with zero IE length. When this happens or when the extra IE has already been set -EALREADY is passed down and the supplicant will complain that the operation is already in progress and it will not let us associate. We correct this by treating -EALREADY from ieee80211_sta_set_extra_ie() as a success just as we do for wext. Cc: Shan.Palanisamy@Atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03mac80211: fix transposed min/max CW valuesJohannes Berg
I accidentally transposed these in the patch that "fixed" the defaults, leading to extremely low throughput because of the huge min CW. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: validate AID of stations being addedJohannes Berg
We have some validation code in mac80211 but said code will force an invalid AID to 0 which isn't a valid AID either; instead require a valid AID (1-2007) to be passed in from userspace in cfg80211 already. Also move the code before the race comment since it can only be executed during STA addition and thus is not racy. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03mac80211: deprecate conf.beacon_int properlyJohannes Berg
Ivo has updated the driver to no longer use the change flag, so we can remove that, but rt2x00 and ath5k still use the actual value so let's mark it as deprecated too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-27net: ALIGN/PTR_ALIGN cleanup in alloc_netdev_mq()/netdev_priv()Eric Dumazet
Use ALIGN() and PTR_ALIGN() macros instead of handcoding them. Get rid of NETDEV_ALIGN_CONST ugly define Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22wireless: move some utility functions from mac80211 to cfg80211Zhu Yi
The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22mac80211: correct probe wait timeJohannes Berg
My first patch submission used 200ms, which I then somehow managed to revert back to the earlier 50ms I had used for some tests in the second patch submission -- but that was wrong, I should have used 200ms here. Correct that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22mac80211: fix probe response wait timingJohannes Berg
In "mac80211: split out and decrease probe wait time" I tried to reduce the time waiting for a probe response, but failed to take into account the case where we are detecting beacon loss in software -- in that case we still wait the monitoring time rather than the probe wait time. Fix this by refactoring the mod_timer() calls in ieee80211_associated(). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: fix managed mode BSSID handlingJohannes Berg
Currently, we will ask the driver to configure right away when somebody changes the desired BSSID. That's totally strange because then we will configure the driver without even knowing whether the BSS exists. Change this to only configure the BSSID when associated, and configure a zero BSSID when not associated. As a side effect, this fixes an issue with the iwlwifi driver which doesn't implement sta_notify properly and uses the BSSID instead and gets very confused if the BSSID is cleared before we disassociate, which results in the warning Marcel posted [1] and iwlwifi bug 1995 [2]. [1] http://thread.gmane.org/gmane.linux.kernel.wireless.general/32598 [2] http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1995 Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: fix parameter confusion when finding IBSSJohannes Berg
When I fixed the crypto bit I must have done the negative test only -- it is quite clearly impossible to find _any_ IBSS to join with the parameters put the wrong way around. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: don't try to do anything on unchanged genIEJohannes Berg
When the genIE hasn't changed there's no reason to kick the state machine since it won't be able to do anything new -- doing this decreases the useless work we do for reassociating because if we do kick the state machine it will try to find a usable BSS but there might not be one because wpa_supplicant will only change the BSSID a little later. In a sense this is a workaround for userspace behaviour, but on the other hand userspace cannot really keep track of what the kernel currently has for genIE since any process could have changed that while wpa_supplicant wasn't looking. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: Do not override AID in the duration fieldJouni Malinen
When updating the duration field for TX frames, skip the update for PS-Poll frames that use this field for other purposes (AID). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: PS processing for every Beacon with our AID in TIMJouni Malinen
If the AP includes our AID in the TIM IE, we need to process the Beacon frame as far as PS is concerned (send PS-Poll or nullfunc data with PM=0). The previous code skipped this in cases where the CRC value did not change and it would not change if the AP continues including our AID in the TIM.. There is no need to count the crc32 value for directed_tim with this change, so we can remove that part. In order not to change the order of operations (i.e., update WMM parameters prior to sending PS-Poll), the CRC match is checked twice as only after the PS processing step, the rest of the function is skipped if nothing changed in the Beacon. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: fix kernel-docJohannes Berg
Moving information from config_interface to bss_info_changed removed struct ieee80211_if_conf which the documentation still refers to, additionally there's one kernel-doc description too much and one other missing, fix all this. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: cancel/restart all timers across suspend/resumeJohannes Berg
We forgot to cancel all timers in mac80211 when suspending. In particular we forgot to deal with some things that can cause hardware reconfiguration -- while it is down. While at it we go ahead and add a warning in ieee80211_sta_work() if its run while the suspend->resume cycle is in effect. This should not happen and if it does it would indicate there is a bug lurking in either mac80211 or mac80211 drivers. With this now wpa_supplicant doesn't blink when I go to suspend and resume where as before there where issues with some timers running during the suspend->resume cycle. This caused a lot of incorrect assumptions and would at times bring back the device in an incoherent, but mostly recoverable, state. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: move channel switch codeJohannes Berg
The channel switch code is currently in the spectrum management file, where arguably it belongs. However, it is for managed mode only and uses the structures for that mode only so having it in a more generic file can be confusing. Additionally, my next patch gets simpler with the code here. When/if we ever implement this for IBSS or mesh then we will need to rework the structures it uses anyway at which point we could move the code back. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20nl80211: Validate NL80211_ATTR_KEY_SEQ lengthJouni Malinen
Validate RSC (NL80211_ATTR_KEY_SEQ) length in nl80211/cfg80211 instead of having to do this in all the drivers. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: Cancel pending probereq poll on beacon RXJouni Malinen
While the probe request poll is expected to work, it looks like it does not always result in getting a response. The exact reason for this is unclear, but anyway, if we do receive a Beacon frame from our AP, there is no need to disconnect based on the probereq poll. This seems to help keep the connection bit more stable in cases where beacon loss is occurring semi-frequently. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: Initialize RX's last received sequence numberSenthil Balasubramanian
The STA may drop the very first frame if it happens to be a retried frame. This is because we maintian the last received sequence number per TID for QoS frames and it is initialized to zero through kzalloc during sta_info_alloc and the sequence number of the very first date frame received would be ZERO (as per IEEE 802.11-2007, 7.1.3.4.1). If the frame dropped happens to be an EAP Request Identity(very first frame from the AP), then wpa_supplicnat disconnects the STA and the whole procedure starts again. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211/cfg80211: move wiphy specific debugfs entries to cfg80211Luis R. Rodriguez
This moves the cfg80211 specific stuff to new cfg80211 debugfs entries. Non-mac80211 will also get these entries now. There were only 4 which we take: rts_threshold fragmentation_threshold short_retry_limit long_retry_limit Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211: check if HT40+/- is allowed before sending assocLuis R. Rodriguez
We weren't checking this at all. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20wireless: rename IEEE80211_CHAN_NO_FAT_* to HT40-/+Luis R. Rodriguez
This is more consistent with our nl80211 naming convention for HT40-/+. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/scsi/fcoe/fcoe.c
2009-05-13mac80211: make noack test availableJohannes Berg
There's this internal wifi_wme_noack_test variable that we use to set the QoS control if set. For one, it is unlikely that it is set. Secondly, if set it needs to influence the IEEE80211_TX_CTL_NO_ACK TX control flag, and finally we should also be able to set it at all, so make it available in debugfs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13mac80211: IBSS supported rate fixesJohannes Berg
Currently mac80211 announces a rate set with no basic rates, this fixes it to use 1/2 or 6/9 Mbit as basic rates by default. Additionally, mac80211 will currently adopt the peer's entire rate set, rather than just the basic rate set; fix that too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13mac80211: don't connect to IBSS network with different privacyJohannes Berg
Even when we find an IBSS with the SSID we're looking for, we may not be able to connect to it because it has a key and we don't, or vice versa. Avoid such situations by checking the privacy capability bit. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13mac80211: split out and decrease probe wait timeJohannes Berg
The time we wait for a probe response after probing an AP due to beacon loss is currently the same as the monitoring interval, 2s. This is far too long, APs should respond to probes within a fraction of that time. To be able to adjust both values, add a new constant IEEE80211_PROBE_WAIT, use it for checking the probe response, and adjust it down to 200ms instead of 2 seconds. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13mac80211: respond to beacon loss report only onceJohannes Berg
The driver might keep reporting beacon loss until we disassociate -- catch that and don't respond to any subsequent events until the probe is either successful or we disassociate. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13nl80211: Add RSC configuration for new keysJouni Malinen
When setting a key with NL80211_CMD_NEW_KEY, we should allow the key sequence number (RSC) to be set in order to allow replay protection to work correctly for group keys. This patch documents this use for nl80211 and adds the couple of missing pieces in nl80211/cfg80211 and mac80211 to support this. In addition, WEXT SIOCSIWENCODEEXT compat processing in cfg80211 is extended to handle the RSC (this was already specified in WEXT, but just not implemented in cfg80211/mac80211). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13nl80211: Add IEEE 802.1X PAE control for station modeJouni Malinen
Add a new NL80211_ATTR_CONTROL_PORT flag for NL80211_CMD_ASSOCIATE to allow user space to indicate that it will control the IEEE 802.1X port in station mode. Previously, mac80211 was always marking the port authorized in station mode. This was enough when drop_unencrypted flag was set. However, drop_unencrypted can currently be controlled only with WEXT and the current nl80211 design does not allow fully secure configuration. Fix this by providing a mechanism for user space to control the IEEE 802.1X port in station mode (i.e., do the same that we are already doing in AP mode). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13nl80211: improve station flags handlingJohannes Berg
It is currently not possible to modify station flags, but that capability would be very useful. This patch introduces a new nl80211 attribute that contains a set/mask for station flags, and updates the internal API (and mac80211) to mirror that. The new attribute is parsed before falling back to the old so that userspace can specify both (if it can) to work on all kernels. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>