aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2009-03-27mac80211/iwlwifi: move virtual A-MDPU queue bookkeeping to iwlwifiJohannes Berg
This patch removes all the virtual A-MPDU-queue bookkeeping from mac80211. Curiously, iwlwifi already does its own bookkeeping, so it doesn't require much changes except where it needs to handle starting and stopping the queues in mac80211. To handle the queue stop/wake properly, we rewrite the software queue number for aggregation frames and internally to iwlwifi keep track of the queues that map into the same AC queue, and only talk to mac80211 about the AC queue. The implementation requires calling two new functions, iwl_stop_queue and iwl_wake_queue instead of the mac80211 counterparts. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Reinette Chattre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: fix aggregation to not require queue stopJohannes Berg
Instead of stopping the entire AC queue when enabling aggregation (which was only done for hardware with aggregation queues) buffer the packets for each station, and release them to the pending skb queue once aggregation is turned on successfully. We get a little more code, but it becomes conceptually simpler and we can remove the entire virtual queue mechanism from mac80211 in a follow-up patch. This changes how mac80211 behaves towards drivers that support aggregation but have no hardware queues -- those drivers will now not be handed packets while the aggregation session is being established, but only after it has been fully established. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: add skb length sanity checkingJohannes Berg
We just found a bug in zd1211rw where it would reject packets in the ->tx() method but leave them modified, which would cause retransmit attempts with completely bogus skbs, eventually leading to a panic due to not having enough headroom in those. This patch adds a sanity check to mac80211 to catch such driver mistakes; in this case we warn and drop the skb. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: unify and fix TX aggregation startJohannes Berg
When TX aggregation becomes operational, we do a number of steps: 1) print a debug message 2) wake the virtual queue 3) notify the driver Unfortunately, 1) and 3) are only done if the driver is first to reply to the aggregation request, it is, however, possible that the remote station replies before the driver! Thus, unify the code for this and call the new function ieee80211_agg_tx_operational in both places where TX aggregation can become operational. Additionally, rename the driver notification from IEEE80211_AMPDU_TX_RESUME to IEEE80211_AMPDU_TX_OPERATIONAL. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: clean up __ieee80211_tx argsJohannes Berg
__ieee80211_tx takes a struct ieee80211_tx_data argument, but only uses a few of its members, namely 'skb' and 'sta'. Make that explicit, so that less internal knowledge is required in ieee80211_tx_pending and the possibility of introducing errors here is removed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: rework the pending packets codeJohannes Berg
The pending packets code is quite incomprehensible, uses memory barriers nobody really understands, etc. This patch reworks it entirely, using the queue spinlock, proper stop bits and the skb queues themselves to indicate whether packets are pending or not (rather than a separate variable like before). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: fix A-MPDU queue assignmentJohannes Berg
Internally, mac80211 requires the skb's queue mapping to be set to the AC queue, not the virtual A-MPDU queue. This is not done correctly currently, this patch moves the code down to directly before the driver is invoked and adds a comment that it will be moved into the driver later. Since this requires __ieee80211_tx() to have the sta pointer, make sure to provide it in ieee80211_tx_pending(). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: rewrite fragmentationJohannes Berg
Fragmentation currently uses an allocated array to store the fragment skbs, and then keeps track of which have been sent and which are still pending etc. This is rather complicated; make it simpler by just chaining the fragments into skb->next and removing from that list when sent. Also simplifies all code that needs to touch fragments, since it now only needs to walk the skb->next list. This is a prerequisite for fixing the stored packet code, which I need to do for proper aggregation packet storing. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: fix RX pathJohannes Berg
My previous patch ("mac80211: remove mixed-cell and userspace MLME code") was too obvious to me, so obvious that a stupid bug crept in. The IBSS RX function must be invoked for IBSS, of course, not anything != IBSS. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: rate control status only for controlled packetsJohannes Berg
This patch changes mac80211 to not notify the rate control algorithm's tx_status() method when reporting status for a packet that didn't go through the rate control algorithm's get_rate() method. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: add beacon filtering supportKalle Valo
Add IEEE80211_HW_BEACON_FILTERING flag so that driver inform that it supports beacon filtering. Drivers need to call the new function ieee80211_beacon_loss() to notify about beacon loss. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: disable power save when scanningKalle Valo
When software scanning we need to disable power save so that all possible probe responses and beacons are received. For hardware scanning assume that hardware will take care of that and document that assumption. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: track beacons separately from the rx path activityKalle Valo
Separate beacon and rx path tracking in preparation for the beacon filtering support. At the same time change ieee80211_associated() to look a bit simpler. Probe requests are now sent only after IEEE80211_PROBE_IDLE_TIME, which is now set to 60 seconds. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: decrease execution of the associated timerKalle Valo
Currently the timer is triggering every two seconds (IEEE80211_MONITORING_INTERVAL). Decrease the timer to only trigger during data idle periods to avoid waking up CPU unnecessary. The timer will still trigger during idle periods, that needs to be fixed later. There's also a functional change that probe requests are sent only when the data path is idle, earlier they were sent also while there was activity on the data path. This is also preparation for the beacon filtering support. Thanks to Johannes Berg for the idea. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: remove mixed-cell and userspace MLME codeJohannes Berg
Neither can currently be set from userspace, so there's no regression potential, and neither will be supported from userspace since the new userspace APIs allow the SME, which is in userspace, to control all we need. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Check iftype in cfg80211 codeJouni Malinen
We do not want to require all the drivers using cfg80211 to need to do this. In addition, make the error values consistent by using EOPNOTSUPP instead of semi-random assortment of errno values. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Check that netif_runnin is true in cfg80211 codeJouni Malinen
We do not want to require all the drivers using cfg80211 to need to do this or to be prepared to handle these commands when the interface is down. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Remove NL80211_CMD_SET_MGMT_EXTRA_IEJouni Malinen
The functionality that NL80211_CMD_SET_MGMT_EXTRA_IE provided can now be achieved with cleaner design by adding IE(s) into NL80211_CMD_TRIGGER_SCAN, NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. Since this is a very recently added command and there are no known (or known planned) applications using NL80211_CMD_SET_MGMT_EXTRA_IE and taken into account how much extra complexity it adds to the IE processing we have now (and need to add in the future to fix IE order in couple of frames), it looks like the best option is to just remove the implementation of this command for now. The enum values themselves are left to avoid changing the nl80211 command or attribute numbers. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: Fix memleak in nl80211 authentication on deinitJouni Malinen
This file was forgotten from the quilt patch that added MLME primitives, so the kfree on interface removal is missing. Fix this potential memleak by freeing the temporary Authentication frame IEs from SME when the interface is being removed. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: resume properly, add suspend/resume testJohannes Berg
When mac80211 resumes, it currently doesn't reconfigure the interfaces entirely and also doesn't reconfigure BSS information -- fix this. Also, to be able to test this, add a debugfs file that just calls the suspend/resume code to see what happens when we go through that, without needing the time-consuming suspend/resume cycle. (Original version broke the build for CONFIG_PM=n. Define alternative functions for that situation. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Add MLME primitives to support external SMEJouni Malinen
This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Event notifications for MLME eventsJouni Malinen
Add new nl80211 event notifications (and a new multicast group, "mlme") for informing user space about received and processed Authentication, (Re)Association Response, Deauthentication, and Disassociation frames in station and IBSS modes (i.e., MLME SAP interface primitives MLME-AUTHENTICATE.confirm, MLME-ASSOCIATE.confirm, MLME-REASSOCIATE.confirm, MLME-DEAUTHENTICATE.indicate, and MLME-DISASSOCIATE.indication). The event data is encapsulated as the 802.11 management frame since we already have the frame in that format and it includes all the needed information. This is the initial step in providing MLME SAP interface for authentication and association with nl80211. In other words, kernel code will act as the MLME and a user space application can control it as the SME. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: Fix reassociation by not clearing previous BSSIDJouni Malinen
We must not clear the previous BSSID when roaming to another AP within the same ESS for reassociation to be used properly. It is fine to clear this when the SSID changes, so let's move the code into ieee80211_sta_set_ssid(). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: Fix a typo in assoc vs. reassoc checkJouni Malinen
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: don't drop nullfunc frames during software scanKalle Valo
ieee80211_tx_h_check_assoc() was dropping everything else than probe requests during software scan. So the nullfunc frame with the power save bit was dropped and AP never received it. This meant that AP never buffered any frames for the station during software scan. Fix this by allowing to transmit both probe request and nullfunc frames during software scan. Tested with stlc45xx. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: Tear down aggregation sessions for suspend/resumeSujith
When the driver has been notified with a STA_REMOVE, it tears down the internal ADDBA state. On resume, trying to initiate aggregation would fail because mac80211 has not cleared the operational state for that <TID,STA>. This can be fixed by tearing down the existing sessions on a suspend. Also, the driver can initiate a new BA session when suspend is in progress. This is fixed by marking the station as being in suspend state and denying ADDBA requests for such STAs. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: acquire sta_lock for station suspend/resumeJohannes Berg
To avoid concurrent manipulations of the sta list (which shouldn't be possible at this point, but anyway) we need to hold the sta_lock around iterating the list. At the same time, we do not need to iterate the list at all if the driver doesn't want to be notified. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: Populate HT limitation with TKIP/WEP to the handler for ↵Vasanthakumar Thiagarajan
SIOCSIWENCODE too Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27wireless: radiotap updatesJohannes Berg
Radiotap was updated to include a "bad PLCP" flag and standardise the "bad FCS" flag in the "flags" rather than "RX flags" field, this patch updates Linux to that standard. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: stop queues across suspend/resumeJohannes Berg
Even though userland probably cannot submit packets, there might still be some coming, and that's no good when the driver doesn't expect them. Stop the queues across suspend/resume. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: fix warnings in ieee80211_if_configJohannes Berg
The last warning can never trigger, and the explicit AP_VLAN check is pointless if we move the config_interface check down, in practice config_interface is required anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: start pending scan after probe/auth/assoc timed outHelmut Schaa
If a scan is queued in STA mode while the interface is in state direct probe, authenticate or associate the scan is delayed until the interface enters disabled or associated state. But in case of direct probe-, authentication- or association- timeout sta_work will not be scheduled anymore (without external trigger) and thus the pending scan is not executed and prevents a new scan from being triggered (-EBUSY). Fix this by queueing the sta work again after direct probe-, authentication- and association- timeout. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: remove ieee80211_num_regular_queuesJohannes Berg
This inline is useless and actually makes the code _longer_ rather than shorter. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: ieee80211_ibss_commit() cleanupAlina Friedrichsen
Don't call ieee80211_sta_find_ibss() directly, like it's done in STA mode, so that the commit() call is more harmless respectively has less site-effects. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-17Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-03-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/igb/igb_main.c drivers/net/qlge/qlge_main.c drivers/net/wireless/ath9k/ath9k.h drivers/net/wireless/ath9k/core.h drivers/net/wireless/ath9k/hw.c
2009-03-16mac80211: deauth before flushing STA informationHerton Ronaldo Krzesinski
Even after commit "mac80211: deauth when interface is marked down" (e327b847 on Linus tree), userspace still isn't notified when interface goes down. There isn't a problem with this commit, but because of other code changes it doesn't work on kernels >= 2.6.28 (works if same/similar change applied on 2.6.27 for example). The issue is as follows: after commit "mac80211: restructure disassoc/deauth flows" in 2.6.28, the call to ieee80211_sta_deauthenticate added by commit e327b847 will not work: because we do sta_info_flush(local, sdata) inside ieee80211_stop (iface.c), all stations in interface are cleared, so when calling ieee80211_sta_deauthenticate->ieee80211_set_disassoc (mlme.c), inside ieee80211_set_disassoc we have this in the beginning: sta = sta_info_get(local, ifsta->bssid); if (!sta) { The !sta check triggers, thus the function returns early and ieee80211_sta_send_apinfo(sdata, ifsta) later isn't called, so wpa_supplicant/userspace isn't notified with SIOCGIWAP. This commit moves deauthentication to before flushing STA info (sta_info_flush), thus the above can't happen and userspace is really notified when interface goes down. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16mac80211: handle failed scan requests in STA modeHelmut Schaa
If cfg80211 requests a scan it awaits either a return code != 0 from the scan function or the cfg80211_scan_done to be called. In case of a STA mac80211's scan function ever returns 0 and queues the scan request. If ieee80211_sta_work is executed and ieee80211_start_scan fails for some reason cfg80211_scan_done will never be called but cfg80211 still thinks the scan was triggered successfully and will refuse any future scan requests due to drv->scan_req not being cleaned up. If a scan is triggered from within the MLME a similar problem appears. If ieee80211_start_scan returns an error, local->scan_req will not be reset and mac80211 will refuse any future scan requests. Hence, in both cases call ieee80211_scan_failed (which notifies cfg80211 and resets local->scan_req) if ieee80211_start_scan returns an error. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16mac80211: Fix WMM ACM parsing and AC downgrade operationJouni Malinen
Incorrect local->wmm_acm bits were set for AC_BK and AC_BE. Fix this and add some comments to make it easier to understand the AC-to-UP(pair) mapping. Set the wmm_acm bits (and show WMM debug) even if the driver does not implement conf_tx() handler. In addition, fix the ACM-based AC downgrade code to not use the highest priority in error cases. We need to break the loop to get the correct AC_BK value (3) instead of returning 0 (which would indicate AC_VO). The comment here was not really very useful either, so let's provide somewhat more helpful description of the situation. Since it is very unlikely that the ACM flag would be set for AC_BK and AC_BE, these bugs are not likely to be seen in real life networks. Anyway, better do these things correctly should someone really use silly AP configuration (and to pass some functionality tests, too). Remove the TODO comment about handling ACM. Downgrading AC is perfectly valid mechanism for ACM. Eventually, we may add support for WMM-AC and send a request for a TS, but anyway, that functionality won't be here at the location of this TODO comment. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16mac80211: Fix panic on fragmentation with power savingJouni Malinen
It was possible to hit a kernel panic on NULL pointer dereference in dev_queue_xmit() when sending power save buffered frames to a STA that woke up from sleep. This happened when the buffered frame was requeued for transmission in ap_sta_ps_end(). In order to avoid the panic, copy the skb->dev and skb->iif values from the first fragment to all other fragments. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05mac80211: Update IBSS beacon timestamp properlySujith
In IBSS mode, the beacon timestamp has to be filled with the BSS's timestamp when joining, and set to zero when creating a new BSS. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05mac80211: Always send a null data frame if TIM bit is set.Vivek Natarajan
If the AP thinks we are in power save state eventhough we are not truly in that state, it sets the TIM bit and does not send a data frame unless we send a null data frame to correct the state in the AP. This might happen if the null data frame for wake up is lost in the air after we disable power save. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05mac80211: Fix TKIP/WEP HT capability handlingSujith
There is no need to parse the AP's HT capabilities if the STA uses TKIP/WEP cipher. This allows the rate control module to choose the correct(legacy) rate table. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05mac80211: Fix quality reporting for wireless statsJohannes Berg
Since "mac80211/cfg80211: move iwrange handler to cfg80211", the results for link quality from "iwlist scan" and "iwconfig" commands have been very different. The results are now consistent. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported- and tested-by: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05mac80211: Notify the driver only when the beacon interval changesSujith
Currently, the driver is unconditionally notified of beacon interval. This is a problem in AP mode, because the driver has to know that the beacon interval has actualy changed to recalculate TBTT and reset the HW TSF. Fix this to make mac80211 notify the driver only when the beacon interval has been reconfigured to a new value. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: Give it some time to do the TSF syncAlina Friedrichsen
Give slow hardware some time to do the TSF sync, to not run into an IBSS merging endless loop in some rarely situations. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: Don't merge with the same BSSIDAlina Friedrichsen
It was not a good idea to do a TSF reset on strange IBSS merges to the same BSSID. For example it will break the TSF sync of ath9k completely and it is unnecessary as all hardware I have tested do a TSF sync to a higher value automatically and IBSS merges are only done to higher TSF values. It only need a TSF reset to accept a lower value, when the IBSS network is changed manually. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: Introduce a generic commit() to apply changesAlina Friedrichsen
This patch introduces a generic commit() function which initiate a new network joining process. It should be called after some interface config changes, so that the changes get applied more cleanly. Currently set_ssid() and set_bssid() call it. Others can be added in future patches. In version 1 the header files was forgotten, sorry. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: Add software scan notifiersMichael Buesch
This adds optional notifier functions for software scan. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211/cfg80211: move iwrange handler to cfg80211Johannes Berg
The previous patch made cfg80211 generally aware of the signal type a given hardware will give, so now it can implement SIOCGIWRANGE itself, removing more wext stuff from mac80211. Might need to be a little more parametrized once we have more hardware using cfg80211 and new hardware capabilities. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>