aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2007-10-10[PATCH] mac80211: Defer setting of RX_FLAG_DECRYPTED.Mattias Nissler
The decryption handlers will skip the frame if the RX_FLAG_DECRYPTED flag is set, so the early flag setting introduced by Johannes breaks decryption. To work around this, call the handlers first and then set the flag. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] ieee80211_if_set_type: make check for master dev more explicitJohn W. Linville
Problem description by Daniel Drake <dsd@gentoo.org>: "This sequence of events causes loss of connectivity: <plug in> <associate as normal in managed mode> ifconfig eth7 down iwconfig eth7 mode monitor ifconfig eth7 up ifconfig eth7 down iwconfig eth7 mode managed <associate as normal> At this point you are associated but TX does not work. This is because the eth7 hard_start_xmit is still ieee80211_monitor_start_xmit." The problem is caused by ieee80211_if_set_type checking for a non-zero hard_start_xmit pointer value in order to avoid changing that value for master devices. The fix is to make that check more explicitly linked to master devices rather than simply checking if the value has been previously set. CC: Daniel Drake <dsd@gentoo.org> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[MAC80211]: add sta_notify callbackTomas Winkler
This patch adds sta_notify callback and removes sta_table_notification which was not used by any driver. sta_notify() is essential for drivers that keeps notion of station internally and need to be notified about removal or addition of a station to the (I)BSS or assocation to an AP. This version adds interface id to the parameter list as suggested by Johannes Berg Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: implement cfg80211's change_interface hookJohannes Berg
This implements the cfg80211 change_interface hook that changes the type of an interface and cleans up the code a bit. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: Add association LED triggerMichael Buesch
Many devices have LEDs to indicate the link status. Export this functionality to drivers. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: make userspace-mlme a per-interface settingJohannes Berg
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: improve radiotap injectionJohannes Berg
This improves radiotap injection by removing the shortcut over TX handlers that led to BUGS when injecting frames without setting a rate and also resulted in various other quirks. Now, TX handlers are run but some information that was present in the radiotap header is used instead of automatic settings. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Andy Green <andy@warmcat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[MAC80211]: remove ALG_NONEJohannes Berg
This "algorithm" is used only internally and is not useful. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Michael Buesch <mb@bu3sch.de> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: use RX_FLAG_DECRYPTED for sw decrypted as wellJohannes Berg
This makes mac80211 set the RX_FLAG_DECRYPTED flag for frames decrypted in software allowing us to handle some things more uniformly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: consolidate decryption moreJohannes Berg
Currently, we have three RX handlers doing the decryption. This patch changes it to have only one handler doing everything, thereby getting rid of many duplicate checks. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> -- net/mac80211/rx.c | 46 ++++++++++++---------------------------------- 1 files changed, 12 insertions(+), 34 deletions(-)
2007-10-10[MAC80211]: move sta_process rx handler laterJohannes Berg
This moves the sta_process RX handler to after decryption so that frames that cannot be decrypted don't influence statistics, it is likely that they were injected or something else is totally wrong. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: remove management interfaceJohannes Berg
Removes the management interface since it is only required for hostapd/userspace MLME, will not be in the final tree at least in this form and hostapd/userspace MLME currently do not work against this tree anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: add "invalid" interface typeJohannes Berg
Since I cannot convince the lazy driver authors (hello Michael) to stop (ab)using the MGMT interface type internally in their drivers, this patch introduces a new _INVALID type especially for their use and changes all affected drivers to use it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: Check open_count before calling config callback.Michael Buesch
Also remove the check for ops->config!=NULL, as it can never be NULL. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[PATCH] mac80211: bss_tim_clear must use ~ instead of !Michael Buesch
We need to use bitwise NOT. This also cleans up the code a little bit to make it more readable. Signed-off-by: Michael Buesch <mb@bu3sch.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: remove generic IE for AP interfacesJohannes Berg
This is not useful since we do not support probe response offload to hardware at this time and beacons are set in another way. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: remove all prism2 ioctlsJohannes Berg
This patch removes all prism2 ioctls. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: fix iff_promiscs, iff_allmultis raceJohannes Berg
When we update the counters iff_promiscs and iff_allmultis in struct ieee80211_local we have no common lock held to protect them. The problem is that the update to each counter may not be atomic, so we could end up with iff_promiscs == -1 in unfortunate conditions. To fix it, use atomic_t values. It doesn't matter whether the two counters are updated together atomically or not, if there are two invocations of set_multicast_list we will end up with multiple configure_filter() invocations of which the latter will always be correct. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: fix TKIP IV updateJohannes Berg
The TKIP IV should be updated only after MMIC verification, this patch changes it to be at that spot. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: fix vlan bugJohannes Berg
VLAN interfaces have yet another bug: they aren't accounted for properly in the receive path in prepare_for_handlers(). I noticed this by code inspection, but it would be easy for the compiler to catch such things if we'd just use the proper enum where appropriate. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: remove ieee80211_wep_get_keyidxJohannes Berg
This function is not used any more. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: consolidate encryptionJohannes Berg
Currently we run through all crypto handlers for each transmitted frame although we already know which one will be used. This changes the code to invoke only the needed handler. It also moves the wep code into wep.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: consolidate decryptionJohannes Berg
Currently, we run through all three crypto algorithms for each received frame even though we have previously determined which key we have and as such already know which algorithm will be used. Change it to invoke only the needed function. Also move the WEP decrypt handler to wep.c so that fewer functions need to be non-static. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: pass frames to monitor interfaces earlyJohannes Berg
This makes mac80211 pass all frames to monitor interfaces early before all receive processing with the benefit that only a single copy needs to be made, all monitors can receive clones of the skb and if the frame will be discarded we don't even need to make a single copy. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: fix interface initialisation and deinitialisationJohannes Berg
When an interface is registered it is still uninitialised so ieee80211_if_reinit() can't be called on it (it will oops.) Hence, we need to move the uninit method assignment. Also, this patch fixes the bug that the master device is never initialised nor deinitialised at all. Oddly, the deinit code had an if statement to not run some code when running for the master interface (which never happened), but that if statement is also wrong. Fix that too. Now that the uninit code is run for the master device, another bug surfaced: it tries to remove all dependent interfaces and that oopses or BUGs at some point, either because it unregisters already unregistered interfaces (missing list_del bug) or due to trying to iterate a list that has had other things removed. Fix this too by handling the master interface specially. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: fix virtual interface lockingJohannes Berg
Florian Lohoff noticed a bug in mac80211: when bringing the master interface down while other virtual interfaces are up we call dev_close() under a spinlock which is not allowed. This patch removes the sub_if_lock used by mac80211 in favour of using an RCU list. All list manipulations are already done under rtnl so are well protected against each other, and the read-side locks we took in the RX and TX code are already in RCU read-side critical sections. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Florian Lohoff <flo@rfc822.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Satyam Sharma <satyam@infradead.org> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: remove crypto algorithm typedefJohannes Berg
The typedef is not required, we can just use "enum ieee80211_key_alg" instead of "ieee80211_key_alg" Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: validate VLAN interfaces betterJohannes Berg
This patch changes mac80211 to verify that VLAN interfaces are valid and not bother drivers about them any more. VLAN interfaces are now only valid when an AP interface is up with the same MAC address, and are automatically turned off when the AP interface is set down. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jouni Malinen <j@w1.fi> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: revamp interface and filter configurationJohannes Berg
Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[NET]: Move hardware header operations out of netdevice.Stephen Hemminger
Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Wrap hard_header_parseStephen Hemminger
Wrap the hard_header_parse function to simplify next step of header_ops conversion. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: rename ieee80211_cfg.h to cfg.hMichael Wu
Might as well rename ieee80211_cfg.h to cfg.h to keep things consistent. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: kill vlan_idJohannes Berg
Each station has a vlan_id that is useless. Remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: kill IE parse typedefJohannes Berg
The parse result typedef isn't needed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: rename ieee80211_cfg.c to cfg.cJohannes Berg
It's just painful to have the extra ieee80211_ prefix. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: print out wiphy name instead of master deviceJohannes Berg
This makes mac80211 print out the wiphy name instead of the master device name where appropriate. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: fix warnings introduced by the doc patchesJohannes Berg
This fixes a warning about NUM_IEEE80211_MODES missing in a switch statement. Intentionally do not add a default case so we get warnings at these places if we need to add new modes. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: remove key threshold stuffJohannes Berg
This patch removes the key threshold stuff from mac80211. I have patches for later that add it as a per-key setting to nl/cfg80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: allow drivers to indicate failed FCS/PLCP checksumJohannes Berg
This patch allows drivers to indicate bad FCS/PLCP CRC to the stack and have the stack drop packets like that except for monitor interfaces. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: Add support for setting TX power and radio statusMichael Buesch
This adds support for disabling the radio and setting the TXpower through wext. This also fixes the prism TXpower ioctl (It always overwrote the TXpower value in ieee80211_hw_config()) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NL80211]: add netlink interface to cfg80211Johannes Berg
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: remove/change some comments about Michael MIC hardware offloadJohannes Berg
There are a few TODO comments in the mac80211 sources regarding hardware offload for Michael MIC verification. Those items are, however, better handled in the driver instead of the stack, if any device requires such hand-holding. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: PS mode fixTomas Winkler
tx.mode must be set also for buffered frames. It is used in the tx hanlders Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: use internal network device statsStephen Hemminger
Stats are now available for device usage inside network_device Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: get STA after tx radiotap snippedwarmcat
Johannes Berg noticed that in __ieee80211_tx_prepare() we try to get the STA from addr1 of the ieee80211 header when the radiotap header is actually still at the front of the packet. This patch defers doing that until the radiotap header is gone. Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: ignore key index on pairwise key (WEP only)Volker Braun
Work-around for broken APs that use a non-zero key index for WEP pairwise keys. With this patch, WEP encryption only is exempt from providing a zero key index. Signed-off-by: Volker Braun <volker.braun@physik.hu-berlin.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: remove TKIP mixing for hw accel againJohannes Berg
The TKIP mixing code was added for the benefit of Intel's ipw3945 chipset but that code ended up not using it. We have previously identified many problems with this code and it crystallized that library functions for mixing are likely to handle this in much more generality and might allow b43 to take advantage of hardware acceleration for TKIP. Due to these reasons, remove the TKIP mixing for hardware accelerated crypto operations. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Buesch <mb@bu3sch.de> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: remove HW_KEY_IDX_INVALIDJohannes Berg
This patch makes the mac80211/driver interface rely only on the IEEE80211_TXCTL_DO_NOT_ENCRYPT flag to signal to the driver whether a frame should be encrypted or not, since mac80211 internally no longer relies on HW_KEY_IDX_INVALID either this removes it, changes the key index to be a u8 in all places and makes the full range of the value available to drivers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: remove set_key_idx callbackJohannes Berg
No existing drivers use this callback, hence there's no telling how it might be used. In fact, it is unlikely to be of much use as-is because the default key index isn't something that the driver can do much with without knowing which interface it was for etc. And if it needs the key index for the transmitted frame, it can get it by keeping a reference to the key_conf structure and looking it up by hw_key_idx. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>