aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2008-09-15mac80211: move STA timer restartJohannes Berg
This I shouldn't have moved to the scan implementation, move it back to the MLME where it belongs, to the notification. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15mac80211: move ieee80211_sta_expireJohannes Berg
ieee80211_sta_expire uses the internal __sta_info_unlink function which can become static if this function is moved to sta_info.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15cfg80211: Add new wireless regulatory infrastructureLuis R. Rodriguez
This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: Reorder debugfs calls during netdev deinitJouni Malinen
ieee80211_free_keys() must be called before ieee80211_debugfs_remove_netdev() in order to make sure that the possible default_key symlink is removed before attempting to remove the netdev debugfs directory. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: move frame TX functionJohannes Berg
The ieee80211_sta_tx function isn't MLME code any more, it's getting used by a lot of code. Move it to utils and rename it to ieee80211_tx_skb. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: make ieee80211_rx_h_mgmt more readableJohannes Berg
That function isn't exactly easy to read especially since it does something in an if branch that continues after the if because the else returns. Express it in a more readable way. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: move spectrum management code outJohannes Berg
Like the HT code, this doesn't depend on the STA-mode implementation and can be handled entirely independently. There's only stub code for now, but when it gets filled having it in its own file will be beneficial. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: make BA session handling independent of STA modeJohannes Berg
The aggregation handling isn't dependent on anything related to our STA-mode implementation, and doesn't need to depend on it for frame processing. This patch moves the relevant code to ht.c and adds a hook in rx.c. For now, the relevant action frames are only processed in STA/IBSS modes, but that's now something we can easily change. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: initialise queue QoS parameters at hw startJohannes Berg
When hardware is started it might be in a confused state with respect to queue QoS parameters. This patch changes mac80211 to set sane defaults right after the hardware is brought up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: split ieee80211_sta_def_wmm_paramsJohannes Berg
Cleans up the code a bit and prepares for the next patch that will use the function elsewhere. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: consolidate deauth/disassocJohannes Berg
deauth and disassoc frames are completely identical so there's little point in having two functions to send them rather than one that gets a parameter. This same a bit of code size. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: reorder frame code in mlmeJohannes Berg
This reorders all frame sending functions to be at the top of the file. When reading the file, I tend to be looking at either the frame code or the state machine, and having them mixed in the file is confusing. When all frame sending is at the top the remainder of the file is more readable, in my opinion. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: remove useless 'ibss' parameterJohannes Berg
Ever since we refactored beaconing to not be controlled by a fake queue this parameter to ieee80211_sta_def_wmm_params has been unused. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: simplify scan startJohannes Berg
ieee80211_sta_start_scan() can very well take a non-NULL ssid pointer with a zero ssid_len. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: clarify scan requestJohannes Berg
When a scan is requested for non-STA interfaces, we simply fire off a scan, but for STA interfaces we shouldn't because they could be in the middle of an association. This clarifies the corresponding code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: move some HT code out of main.cJohannes Berg
Now that I've created ht.c, I can move the aggregation code from main.c into it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: move some HT code out of mlme.cJohannes Berg
Some of the HT code in mlme.c is misplaced: * constants/definitions belong to the ieee80211.h header * code being used in other modes as well shouldn't be there Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: move BSS handling to scan codeJohannes Berg
This moves all the BSS list handling out of mlme.c to scan.c, no further changes except fixing kzalloc/atomic_inc/atomic_inc to kzalloc/atomic_set(2). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: refactor and move scan RX codeJohannes Berg
This patch refactors some code and moves the scan RX function to scan.c. More importantly, however, it changes it so that the MLME's beacon/probe_resp functions aren't invoked when scanning so that we can remove a "if (scanning)" conditions from two places. There's a very slight behavioural change in this patch: now, when scanning, IBSS and mesh aren't updated even on the same channel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: start moving scan code from mlmeJohannes Berg
Here's a first patch to move some code from mlme.c to a new file called scan.c. The end result will hopefully be a more manageable mlme.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: remove useless non-NULL tests from scan results codeJohannes Berg
I'm surprised nobody complained about these before. What a waste. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: use sdata pointer for scan interfaceJohannes Berg
Since we now use sdata pointers most of the time, using a netdev pointer here is somewhat artificial, use an sdata pointer instead. Replace a netdev-prefix in a few messages by a wiphy-prefix. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: reorder mlme codeJohannes Berg
This reorders the mlme code a bit so we don't need all the forward function declarations. It also removes the ERP_INFO_USE_PROTECTION define that is unused, but otherwise contains no real changes. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: stop queues before carrier offTomas Winkler
During testing of the disassociation fixes, Tomas noticed that it was possible to run into a situation where you'd suddenly get a few "wlan0: dropped frame to <AP> (unauthorized port)" messages and I found this to be due to the AP's sta_info having been removed but netif_carrier_off not having removed/stopped traffic yet. To avoid that, stop the queue for the interface (and avoid bringing them up when another vif scans when they weren't up.) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: remove disassociation code from ieee80211_set_associatedTomas Winkler
This patch moves disassociation code from ieee80211_set_associated to ieee80211_set_disassoc. To reduce code duplication, it introduces the ieee80211_sta_send_apinfo function. Additionally, it fixes a lapse where BSS_CHANGED_HT wasn't set when notifying the driver of changes due to disassociation. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: disassociate when moving to new BSSTomas Winkler
This patch makes the MLME cleanly disassociate from the current BSS when leaving it for a new one. This is not just nicer to the old AP (we're leaving it, might as well tell it!) but also required for some drivers that keep track of the station we're associated with, they'd get confused because they'd think we are associated with two APs. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: restructure disassoc/deauth flowsTomas Winkler
This patch restructure the flow of disassociation and deauthentication flows to be consistent under all circumstances. It ensures that BA session is treated down before deauthentication or disassociation, adds the removal of the obsolete sta form station table and fixes a related bug (sta_info_destroy without sta_info_unlink) in ieee80211_associated() and reduce some code duplication Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: move IE parsing to util fileJohannes Berg
Since IE parsing is required for the mlme and mesh code, it's not a static function anyway, and it's much better to have it in util rather than the overly large mlme.c Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: fix typo in action frame handlingJohannes Berg
This says chan_switch.action_code but really means measurement.action_code, of course the actual offset in the frame is the same, it's just harder to understand this way. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: fix action frame length checksJohannes Berg
The action frame length checks are one too small, there's not just an action code as the comment makes you believe, there's a category code too, and the category code is required in each action frame (hence part of IEEE80211_MIN_ACTION_SIZE). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: BSS info: check channel firstJohannes Berg
When we receive information about a BSS we check at some point whether or not we think we're allowed to use the channel it is on, but we do that fairly late. I don't think we should do it that late, so do it earlier to avoid doing IBSS/mesh stuff on that channel and then getting confused because it's disabled. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: make conf_tx non-atomicJohannes Berg
The conf_tx callback currently needs to be atomic, this requirement is just because it can be called from scanning. This rearranges it slightly to only update while not scanning (which is fine, we'll be getting beacons when associated) and thus removes the atomic requirement. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: move some RCU locking into an if branchJohannes Berg
The if itself doesn't need to be protected, so move in the RCU locking to avoid doing anything at all when the condition isn't true. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: change MIMO_PS to SM_PSTomas Winkler
This patch follows 11n spec naming more rigorously replacing MIMO_PS with SM_PS (Spatial Multiplexing Power Save). (Originally submitted as 4 patches, "mac80211: change MIMO_PS to SM_PS", "iwlwifi: change MIMO_PS to SM_PS", "ath9k: change MIMO_PS to SM_PS", and "iwlwifi: remove double definition of SM PS". -- JWL) Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: net/mac80211/mlme.c
2008-09-08mac80211: add missing kernel-docRandy Dunlap
Fix mac80211 kernel-doc missing struct field: Warning(linux-2.6.27-rc1-git2//net/mac80211/sta_info.h:329): No description found for parameter 'tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1]' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08mac80211: Fix rate scale initialization in IBSSEmmanuel Grumbach
This patch address some IBSS rate issues introduced or not covered by "mac80211: eliminate IBSS warning in rate_lowest_index()" and "cfg80211 API for channels/bitrates, mac80211 and driver conversion". This patch: 1. Moves addition of IBSS station from prepare_for_handlers to ieee80211_rx_bss_info when triggered from beacon eliminating bogus supported rates. 2. Initialize properly supported rates also in IBSS merging 3. Ensure that mandatory rates are always added into supported rates. This is needed in case when station addition is triggered from non beacon/probe packet. Some management frames need to be sent 4. Remove initialization of supported rates from self rates. This path was dead code after 6bc37c06bc4 and in general incorrect. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: Vladimir Koutny <vlado@work.ksp.sk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08mac80211: Fix low bit rate in IBSSTomas Winkler
This patch fixes regression in iwlwifi IBSS rate scaling caused by patch: commit 6bc37c06bc424bcf3f944e6a79e2d5bb537e02ed Author: Vladimir Koutny <vlado@work.ksp.sk> Date: Fri Jun 13 16:50:44 2008 +0200 mac80211: eliminate IBSS warning in rate_lowest_index() An IBSS station is added in prepare_for_handlers where the rate scaling was initialized only with single rate matching the received packet. The correct rate scale information should be updated only in ieee80211_rx_bss_info function where beacon is parsed. Because of coding error the rate info was left untouched. If a beacon has triggered the connection the rate remined 1Mbps. This patch fixes this coding error Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: Vladimir Koutny <vlado@work.ksp.sk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05cfg80211: keep track of supported interface modesLuis R. Rodriguez
It is obviously good for userspace to know up front which interface modes a given piece of hardware might support (even if adding such an interface might fail later because of concurrency issues), so let's make cfg80211 aware of that. For good measure, disallow adding interfaces in all other modes so drivers don't forget to announce support for one mode when they add it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05Revert "mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOM"Linus Torvalds
This reverts commit 087d833e5a9f67ba933cb32eaf5a2279c1a5b47c, which was reported to break wireless at least in some combinations with 32bit user space and a 64bit kernel. Alex Williamnson bisected it to this commit. Reported-and-bisected-by: Alex Williamson <alex.williamson@hp.com> Acked-by: John W. Linville <linville@tuxdriver.com> Cc: David Miller <davem@davemloft.net> Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02mac80211: Fix debugfs union misuse and pointer corruptionJouni Malinen
debugfs union in struct ieee80211_sub_if_data is misused by including a common default_key dentry as a union member. This ends occupying the same memory area with the first dentry in other union members (structures; usually drop_unencrypted). Consequently, debugfs operations on default_key symlinks and drop_unencrypted entry are using the same dentry pointer even though they are supposed to be separate ones. This can lead to removing entries incorrectly or potentially leaving something behind since one of the dentry pointers gets lost. Fix this by moving the default_key dentry to a new struct (common_debugfs) that contains dentries (more to be added in future) that are shared by all vif types. The debugfs union must only be used for vif type-specific entries to avoid this type of pointer corruption. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/mlme.c
2008-08-29mac80211/cfg80211: HT capabilities for NEW_STAJouni Malinen
Allow userspace (e.g., hostapd) to set HT capabilities for associated STAs. This is based on a patch from Zhu Yi <yi.zhu@intel.com> (only the NL80211_ATTR_HT_CAPABILITY for NEW_STA part is included here). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29mac80211: Use only precedence level of DSCP field for frame classificationDaniel Wagner
Bit 4-5 of DSCP should not be considered by classify_d1. The 802.11 QoS Priority field is only depending on the precedence level. Signed-off-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29mac80211: Handle scan result IEs in one blockJouni Malinen
Clean up and extend scan result processing by storing all the IEs from Beacon/Probe Response frames in a single block instead of allocating memory for each specific IE separately. This removes lot of unnecessary code and automatically supports reporting of new IEs (e.g., IEEE 802.11r) into user space without need to manually extend mac80211 scanning code whenever a new protocol adds IE(s). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29mac80211/cfg80211: Add BSS configuration options for AP modeJouni Malinen
This change adds a new cfg80211 command, NL80211_CMD_SET_BSS, to allow AP mode BSS parameters to be changed from user space (e.g., hostapd). The drivers using mac80211 are expected to be modified with separate changes to use the new BSS info parameter for short slot time in the bss_info_changed() handler. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29mac80211: fill start-sequence-number for BA session startJohannes Berg
Otherwise, drivers are required to keep track of the sequence numbers themselves, and they really shouldn't be since we already do it for them. I'll fix the race once we figure out how this code should work at all, it's currently disabled. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: quiet chatty IBSS merge messageJohn W. Linville
It seems obvious that this #ifndef should be the opposite polarity... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: don't send empty extended rates IEJan-Espen Pettersen
The association request includes a list of supported data rates. 802.11b: 4 supported rates. 802.11g: 12 (8 + 4) supported rates. 802.11a: 8 supported rates. The rates tag of the assoc request has room for only 8 rates. In case of 802.11g an extended rate tag is appended. However in net/wireless/mlme.c an extended (empty) rate tag is also appended if the number of rates is exact 8. This empty (length=0) extended rates tag causes some APs to deny association with code 18 (unsupported rates). These APs include my ZyXEL G-570U, and according to Tomas Winkler som Cisco APs. 'If count == 8' has been used to check for the need for an extended rates tag. But count would also be equal to 8 if the for loop exited because of no more supported rates. Therefore a check for count being less than rates_len would seem more correct. Thanks to: * Dan Williams for newbie guidance * Tomas Winkler for confirming the problem Signed-off-by: Jan-Espen Pettersen <sigsegv@radiotube.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: Fix debugfs file add/del for netdevJouni Malinen
Previous version was using incorrect union structures for non-AP interfaces when adding and removing max_ratectrl_rateidx and force_unicast_rateidx entries. Depending on the vif type, this ended up in corrupting debugfs entries since the dentries inside different union structures ended up going being on top of eachother.. As the end result, debugfs files were being left behind with references to freed data (instant kernel oops on access) and directories were not removed properly when unloading mac80211 drivers. This patch fixes those issues by using only a single union structure based on the vif type. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>