aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2008-09-05Revert "mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOM"Linus Torvalds
This reverts commit 087d833e5a9f67ba933cb32eaf5a2279c1a5b47c, which was reported to break wireless at least in some combinations with 32bit user space and a 64bit kernel. Alex Williamnson bisected it to this commit. Reported-and-bisected-by: Alex Williamson <alex.williamson@hp.com> Acked-by: John W. Linville <linville@tuxdriver.com> Cc: David Miller <davem@davemloft.net> Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02mac80211: Fix debugfs union misuse and pointer corruptionJouni Malinen
debugfs union in struct ieee80211_sub_if_data is misused by including a common default_key dentry as a union member. This ends occupying the same memory area with the first dentry in other union members (structures; usually drop_unencrypted). Consequently, debugfs operations on default_key symlinks and drop_unencrypted entry are using the same dentry pointer even though they are supposed to be separate ones. This can lead to removing entries incorrectly or potentially leaving something behind since one of the dentry pointers gets lost. Fix this by moving the default_key dentry to a new struct (common_debugfs) that contains dentries (more to be added in future) that are shared by all vif types. The debugfs union must only be used for vif type-specific entries to avoid this type of pointer corruption. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: quiet chatty IBSS merge messageJohn W. Linville
It seems obvious that this #ifndef should be the opposite polarity... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: don't send empty extended rates IEJan-Espen Pettersen
The association request includes a list of supported data rates. 802.11b: 4 supported rates. 802.11g: 12 (8 + 4) supported rates. 802.11a: 8 supported rates. The rates tag of the assoc request has room for only 8 rates. In case of 802.11g an extended rate tag is appended. However in net/wireless/mlme.c an extended (empty) rate tag is also appended if the number of rates is exact 8. This empty (length=0) extended rates tag causes some APs to deny association with code 18 (unsupported rates). These APs include my ZyXEL G-570U, and according to Tomas Winkler som Cisco APs. 'If count == 8' has been used to check for the need for an extended rates tag. But count would also be equal to 8 if the for loop exited because of no more supported rates. Therefore a check for count being less than rates_len would seem more correct. Thanks to: * Dan Williams for newbie guidance * Tomas Winkler for confirming the problem Signed-off-by: Jan-Espen Pettersen <sigsegv@radiotube.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: Fix debugfs file add/del for netdevJouni Malinen
Previous version was using incorrect union structures for non-AP interfaces when adding and removing max_ratectrl_rateidx and force_unicast_rateidx entries. Depending on the vif type, this ended up in corrupting debugfs entries since the dentries inside different union structures ended up going being on top of eachother.. As the end result, debugfs files were being left behind with references to freed data (instant kernel oops on access) and directories were not removed properly when unloading mac80211 drivers. This patch fixes those issues by using only a single union structure based on the vif type. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26net/mac80211/mesh.c: correct the argument to __mesh_table_freeJulia Lawall
In the function mesh_table_grow, it is the new table not the argument table that should be freed if the function fails (cf commit bd9b448f4c0a514559bdae4ca18ca3e8cd999c6d) The semantic match that detects this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E,f; position p1,p2,p3; identifier l; statement S; @@ x = mesh_table_alloc@p1(...) ... if (x == NULL) S ... when != E = x when != mesh_table_free(x) goto@p2 l; ... when != E = x when != f(...,x,...) when any ( return \(0\|x\); | return@p3 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; p3 << r.p3; @@ print "%s: call on line %s not freed or saved before return on line %s via line %s" % (p1[0].file,p1[0].line,p3[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOMJouni Malinen
The previous code was using IWEVCUSTOM to report IEs from AssocReq and AssocResp frames into user space. This can easily hit the 256 byte limit (IW_CUSTOM_MAX) with APs that include number of vendor IEs in AssocResp. This results in the event message not being sent and dmesg showing "wlan0 (WE) : Wireless Event too big (366)" type of errors. Convert mac80211 to use IWEVASSOCREQIE/IWEVASSOCRESPIE to avoid the issue of being unable to send association IEs as wireless events. These newer event types use binary encoding and larger maximum size (IW_GENERIC_IE_MAX = 1024), so the likelyhood of not being able to send the IEs is much smaller than with IWEVCUSTOM. As an extra benefit, the code is also quite a bit simpler since there is no need to allocate an extra buffer for hex encoding. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-18mac80211: update new sta's rx timestampRon Rindjunsky
This patch fixes needless probe request caused by zero value in sta->last_rx inside ieee80211_associated flow Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07mac80211: keep mesh ifaces in allmulti modeLuis Carlos Cobo
Currently a mesh node will not forward a multicast frame if it is not subscribed to the specific multicast address. This patch addresses the issue and fixes mesh multicast forwarding. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07mac80211: fix use of skb->cb for mesh forwardingLuis Carlos Cobo
Now we deal with mesh forwarding before the 802.11->802.3 conversion, thus eliminating a few unnecessary steps. The next hop lookup is called from ieee80211_master_start_xmit() instead of subif_start_xmit(). Until the next hop is found, RA in the frame will be all zeroes for frames originating from the device. For forwarded frames, RA will contain the TA of the received frame, which will be necessary to send a path error if a next hop is not found. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04iwlwifi: HW bug fixesTomas Winkler
This patch adds few HW bug fixes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04mac80211: automatic IBSS channel selectionDaniel Drake
When joining an ad-hoc network, the user is currently required to specify the channel. The network will not be joined otherwise, unless it happens to be sitting on the currently active channel. This patch implements automatic channel selection when the user has not locked the interface onto a specific channel. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04mac80211: make listen_interval be limited by low level driverTomas Winkler
This patch makes possible for a driver to specify maximal listen interval The possibility for user to configure listen interval is not implemented yet, currently the maximum provided by the driver or 1 is used. Mac80211 uses config handler to set listen interval for to the driver. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04mac80211: pass dtim_period to low level driverEmmanuel Grumbach
This patch adds the dtim_period in ieee80211_bss_conf, this allows the low level driver to know the dtim_period, and to plan power save accordingly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-02mac80211: Use queue_lock() in ieee80211_ht_agg_queue_remove().David S. Miller
qdisc_root_lock() is only %100 safe to use when the RTNL semaphore is held. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-01mac80211: fix fragmentation kludgeTomas Winkler
This patch make mac80211 transmit correctly fragmented packet after queue was stopped Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: fix mesh beaconingLuis Carlos Cobo
This patch fixes mesh beaconing, which was broken by "mac80211: revamp beacon configuration". Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: fix cfg80211 hooks for master interfaceJohannes Berg
The master interface is a virtual interface that is registered to mac80211, changing that does not seem like a good idea at the moment. However, since it has no sdata, we cannot accept any configuration for it. This patch makes the cfg80211 hooks reject any such attempt. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: partially fix skb->cb useJohannes Berg
This patch fixes mac80211 to not use the skb->cb over the queue step from virtual interfaces to the master. The patch also, for now, disables aggregation because that would still require requeuing, will fix that in a separate patch. There are two other places (software requeue and powersaving stations) where requeue can happen, but that is not currently used by any drivers/not possible to use respectively. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: append CONFIG_ to MAC80211_VERBOSE_PS_DEBUG in net/mac80211/tx.c.Rami Rosen
In net/mac80211/tx.c, there are some #ifdef which checks MAC80211_VERBOSE_PS_DEBUG (which in fact is never set) instead of CONFIG_MAC80211_VERBOSE_PS_DEBUG, as should be. This patch replaces MAC80211_VERBOSE_PS_DEBUG with CONFIG_MAC80211_VERBOSE_PS_DEBUG in these #ifdef commands in net/mac80211/tx.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: return correct error return from ieee80211_wep_initJeremy Fitzhardinge
Return the proper error code rather than a hard-coded ENOMEM from ieee80211_wep_init. Also, print the error code on failure. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: tx, use dev_kfree_skb_any for beacon_getJiri Slaby
Use dev_kfree_skb_any(); instead of dev_kfree_skb();, since ieee80211_beacon_get function might be called from atomic. (It's in a fail path.) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-20net_sched: Add qdisc_enqueue wrapperJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17pkt_sched: Kill netdev_queue lock.David S. Miller
We can simply use the qdisc->q.lock for all of the qdisc tree synchronization. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17mac80211: Reimplement WME using ->select_queue().David S. Miller
The only behavior change is that we do not drop packets under any circumstances. If that is absolutely needed, we could easily add it back. With cleanups and help from Johannes Berg. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17mac80211: Temporarily mark QoS support BROKEN.David S. Miller
We will undo this after a few changsets. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17netdev: Kill NETIF_F_MULTI_QUEUE.David S. Miller
There is no need for a feature bit for something that can be tested by simply checking the TX queue count. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17netdev: Allocate multiple queues for TX.David S. Miller
alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15netdev: Do not use TX lock to protect address lists.David S. Miller
Now that we have a specific lock to protect the network device unicast and multicast lists, remove extraneous grabs of the TX lock in cases where the code only needs address list protection. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15netdev: Add netdev->addr_list_lock protection.David S. Miller
Add netif_addr_{lock,unlock}{,_bh}() helpers. Use them to protect operations that operate on or read the network device unicast and multicast address lists. Also use them in cases where the code simply wants to block calls into the driver's ->set_rx_mode() and ->set_multicast_list() methods. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-07-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/netfilter/nf_conntrack_proto_tcp.c
2008-07-14mac80211: dont add a STA which is not in the same IBSSEmmanuel Grumbach
This patch avoids adding STAs that don't belong to our IBSS ieee80211_bssid_match matches also bcast address so also APs were added Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix struct ieee80211_tx_queue_paramsJohannes Berg
Multiple issues: - there are no "default" values needed - cw_min/cw_max can be larger than documented - restructure to decrease size - use get_unaligned_le16 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix TX sequence numbersJohannes Berg
This patch makes mac80211 assign proper sequence numbers to QoS-data frames. It also removes the old sequence number code because we noticed that only the driver or hardware can assign sequence numbers to non-QoS-data and especially management frames in a race-free manner because beacons aren't passed through mac80211's TX path. This patch also adds temporary code to the rt2x00 drivers to not break them completely, that code will have to be reworked for proper sequence numbers on beacons. It also moves sequence number assignment down in the TX path so no sequence numbers are assigned to frames that are dropped. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix RX sequence number checkJohannes Berg
According to 802.11-2007, we are doing the wrong thing in the sequence number checks when receiving frames. This fixes it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: Fix ieee80211_rx_reorder_ampdu: ignore QoS null packetsEmmanuel Grumbach
This patch fixes the check at the entrance to ieee80211_rx_reorder_ampdu. This check has been broken by 'mac80211: rx.c use new helpers'. Letting QoS NULL packet in ieee80211_rx_reorder_ampdu led to packet loss in RX. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: revamp beacon configurationJohannes Berg
This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: push interface checks downJohannes Berg
This patch pushes the "netif_running()" and "same type as before" checks down into ieee80211_if_change_type() to centralise the logic instead of duplicating it for cfg80211 and wext. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: revamp virtual interface handlingJohannes Berg
This patch revamps the virtual interface handling and makes the code much easier to follow. Fewer functions, better names, less spaghetti code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: make master netdev handling saneJohannes Berg
Currently, almost every interface type has a 'bss' pointer pointing to BSS information. This BSS information, however, is for a _local_ BSS, not for the BSS we joined, so having it on a STA mode interface makes little sense, but now they have it pointing to the master device, which is an AP mode virtual interface. However, except for some bitrate control data, this pointer is only used in AP/VLAN modes (for power saving stations.) Overall, it is not necessary to even have the master netdev be a valid virtual interface, and it doesn't have to be on the list of interfaces either. This patch changes the master netdev to be special, it now - no longer is on the list of virtual interfaces, which lets me remove a lot of tests for that - no longer has sub_if_data attached, since that isn't used Additionally, this patch changes some vlan/ap mode handling that is related to these 'bss' pointers described above (but in the VLAN case they actually make sense because there they point to the AP they belong to); it also adds some debugging code to IEEE80211_DEV_TO_SUB_IF to validate it is not called on the master netdev any more. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: power management wext hooksSamuel Ortiz
This patch implements the power management routines wireless extensions for mac80211. For now we only support switching PS mode between on and off. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-09rc80211_pid: Fix fast_start parameter handlingMattias Nissler
This removes the fast_start parameter from the rc_pid parameters information and instead uses the parameter macro when initializing the rc_pid state. Since the parameter is only used on initialization, there is no point of making exporting it via debugfs. This also fixes uninitialized memory references to the fast_start and norm_offset parameters detected by the kmemcheck utility. Thanks to Vegard Nossum for reporting the bug. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller
Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Make netif_schedule() routines work with netdev_queue objects.David S. Miller
Only plain netif_schedule() remains taking a net_device, mostly as a compatability item while we transition the rest of these interfaces. Everything else calls netif_schedule_queue() or __netif_schedule(), both of which take a netdev_queue pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08mac80211: Decrease number of explicit ->tx_queue references.David S. Miller
Accomplish this by using local variables. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move rest of qdisc state into struct netdev_queueDavid S. Miller
Now qdisc, qdisc_sleeping, and qdisc_list also live there. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move queue_lock into struct netdev_queue.David S. Miller
The lock is now an attribute of the device queue. One thing to notice is that "suspicious" places emerge which will need specific training about multiple queue handling. They are so marked with explicit "netdev->rx_queue" and "netdev->tx_queue" references. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Remove 'dev' member of struct Qdisc.David S. Miller
It can be obtained via the netdev_queue. So create a helper routine, qdisc_dev(), to make the transformations nicer looking. Now, qdisc_alloc() now no longer needs a net_device pointer argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Create netdev_queue abstraction.David S. Miller
A netdev_queue is an entity managed by a qdisc. Currently there is one RX and one TX queue, and a netdev_queue merely contains a backpointer to the net_device. The Qdisc struct is augmented with a netdev_queue pointer as well. Eventually the 'dev' Qdisc member will go away and we will have the resulting hierarchy: net_device --> netdev_queue --> Qdisc Also, qdisc_alloc() and qdisc_create_dflt() now take a netdev_queue pointer argument. Signed-off-by: David S. Miller <davem@davemloft.net>