aboutsummaryrefslogtreecommitdiff
path: root/net/rfkill
AgeCommit message (Collapse)Author
2008-11-10net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath5k/base.c net/8021q/vlan_core.c
2008-11-06Fix logic error in rfkill_check_duplicityJonathan McDowell
> I'll have a prod at why the [hso] rfkill stuff isn't working next Ok, I believe this is due to the addition of rfkill_check_duplicity in rfkill and the fact that test_bit actually returns a negative value rather than the postive one expected (which is of course equally true). So when the second WLAN device (the hso device, with the EEE PC WLAN being the first) comes along rfkill_check_duplicity returns a negative value and so rfkill_register returns an error. Patch below fixes this for me. Signed-Off-By: Jonathan McDowell <noodles@earth.li> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31rfkill: rate-limit rfkill-input workqueue usage (v3)Henrique de Moraes Holschuh
Limit the number of "expensive" rfkill workqueue operations per second, in order to not hog system resources too much when faced with a rogue source of rfkill input events. The old rfkill-input code (before it was refactored) had such a limit in place. It used to drop new events that were past the rate limit. This behaviour was not implemented as an anti-DoS measure, but rather as an attempt to work around deficiencies in input device drivers which would issue multiple KEY_FOO events too soon for a given key FOO (i.e. ones that do not implement mechanical debouncing properly). However, we can't really expect such issues to be worked around by every input handler out there, and also by every userspace client of input devices. It is the input device driver's responsability to do debouncing instead of spamming the input layer with bogus events. The new limiter code is focused only on anti-DoS behaviour, and tries to not lose events (instead, it coalesces them when possible). The transmitters are updated once every 200ms, maximum. Care is taken not to delay a request to _enter_ rfkill transmitter Emergency Power Off (EPO) mode. If mistriggered (e.g. by a jiffies counter wrap), the code delays processing *once* by 200ms. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31rfkill: honour EPO state when resuming a rfkill controllerHenrique de Moraes Holschuh
rfkill_resume() would always restore the rfkill controller state to its pre-suspend state. Now that we know when we are under EPO, kick the rfkill controller to SOFT_BLOCKED state instead of to its pre-suspend state when it is resumed while EPO mode is active. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-inputHenrique de Moraes Holschuh
Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31rfkill: export global states to rfkill-inputHenrique de Moraes Holschuh
Export the the global switch states to rfkill-input. This is needed to properly implement KEY_* handling without disregarding the initial state. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31rfkill: use killable locks instead of interruptibleHenrique de Moraes Holschuh
Apparently, many applications don't expect to get EAGAIN from fd read/write operations, since POSIX doesn't mandate it. Use mutex_lock_killable instead of mutex_lock_interruptible, which won't cause issues. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-27RFKILL: fix input layer initialisationDmitry Baryshkov
Initialise correctly last fields, so tasks can be actually executed. On some architectures the initial jiffies value is not zero, so later all rfkill incorrectly decides that rfkill_*.last is in future. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-14net/rfkill/rfkill-input.c needs <linux/sched.h>Geert Uytterhoeven
For some m68k configs, I get: | net/rfkill/rfkill-input.c: In function 'rfkill_start': | net/rfkill/rfkill-input.c:208: error: dereferencing pointer to incomplete type As the incomplete type is `struct task_struct', including <linux/sched.h> fixes it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-06rfkill: update LEDs for all state changesHenrique de Moraes Holschuh
The LED state was not being updated by rfkill_force_state(), which will cause regressions in wireless drivers that had old-style rfkill support and are updated to use rfkill_force_state(). The LED state was not being updated when a change was detected through the rfkill->get_state() hook, either. Move the LED trigger update calls into notify_rfkill_state_change(), where it should have been in the first place. This takes care of both issues above. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15rfkill: remove transmitter blocking on suspendHenrique de Moraes Holschuh
Currently, rfkill would stand in the way of properly supporting wireless devices that are capable of waking the system up from sleep or hibernation when they receive a special wireless message. It would also get in the way of mesh devices that need to remain operational even during platform suspend. To avoid that, stop trying to block the transmitters on the rfkill class suspend handler. Drivers that need rfkill's older behaviour will have to implement it by themselves in their own suspend handling. Do note that rfkill *will* attempt to restore the transmitter state on resume in any situation. This happens after the driver's resume method is called by the suspend core (class devices resume after the devices they are attached to have been resumed). The following drivers need to check if they need to explicitly block their transmitters in their own suspend handlers (maintainers Cc'd): arch/arm/mach-pxa/tosa-bt.c drivers/net/usb/hso.c drivers/net/wireless/rt2x00/* (USB might need it?) drivers/net/wireless/b43/ (SSB over USB might need it?) drivers/misc/hp-wmi.c eeepc-laptop w/rfkill support (not in mainline yet) Compal laptop w/rfkill support (not in mainline yet) toshiba-acpi w/rfkill support (not in mainline yet) Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Andrew Bird <ajb@spheresystems.co.uk> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Cc: Philip Langdale <philipl@overt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rfkill: rename rfkill_mutex to rfkill_global_mutexHenrique de Moraes Holschuh
rfkill_mutex and rfkill->mutex are too easy to confuse with each other. Rename rfkill_mutex to rfkill_global_mutex, so that they are easier to tell apart with just one glance. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rfkill: add WARN and BUG_ON paranoia (v2)Henrique de Moraes Holschuh
BUG_ON() and WARN() the heck out of buggy drivers calling into the rfkill subsystem. Also switch from WARN_ON(1) to the new descriptive WARN(). Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rfkill: add missing line breakFelipe Balbi
Trivial patch adding a missing line break on rfkill_claim_show(). Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.co> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29rfkill: use strict_strtoul (v2)Henrique de Moraes Holschuh
Switch sysfs parsing to something that actually works properly. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rfkill: introduce RFKILL_STATE_MAXHenrique de Moraes Holschuh
While it is interesting to not add last-enum-markers because it allows gcc to warn us of switch() statements missing a valid state, we really should be handling memory corruption on a rfkill state with default clauses, anyway. So add RFKILL_STATE_MAX and use it where applicable. It makes for safer code in the long run. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rfkill: add __must_check annotationsHenrique de Moraes Holschuh
rfkill is not a small, mere detail in wireless support. Once it starts supporting rfkill and users start counting on that support, a wireless device is at risk of operating in dangerous conditions should rfkill support fail to properly activate. Therefore, add the required __must_check annotations on some key functions of the rfkill API, for which the wireless drivers absolutely MUST handle the failure mode safely in order to avoid a potentially dangerous situation where the wireless transmitter is left enabled when the user don't want it to. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rfkill: add default global states (v2)Henrique de Moraes Holschuh
Add a second set of global states, "rfkill_default_states", to track the state that will be used when the first rfkill class of a given type is registered, and also to save "undo" information when rfkill_epo is called. Add a new exported function, rfkill_set_default(), which can be used by platform drivers to restore radio state saved by the platform across reboots or shutdown. Also, fix rfkill_epo to properly update rfkill_states, but still preserve a copy of the state so that we can undo the effect of rfkill_epo later if we want to. Add rfkill_restore_states() to restore rfkill_states from the copy. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rfkill: detect bogus double-registering (v2)Henrique de Moraes Holschuh
Detect and abort with -EEXIST if rfkill_register is called twice on the same rfkill struct. And WARN_ON(it) for good measure. While at it, flag when we are adding the first switch of a type, we will need that information later. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-18rfkill: protect suspended rfkill controllersHenrique de Moraes Holschuh
Guard rfkill controllers attached to a rfkill class against state changes after class suspend has been issued. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01RFKILL: set the status of the leds on activation.Dmitry Baryshkov
Provide default activate function to set the state of the led when the led becomes bound to the trigger Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01RFKILL: allow one to specify led trigger nameDmitry Baryshkov
Allow the rfkill driver to specify led trigger name. By default it still defaults to the name of rfkill switch. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01rfkill: query EV_SW states when rfkill-input (re)?connects to a input deviceHenrique de Moraes Holschuh
Every time a new input device that is capable of one of the rfkill EV_SW events (currently only SW_RFKILL_ALL) is connected to rfkill-input, we must check the states of the input EV_SW switches and take action. Otherwise, we will ignore the initial switch state. We also need to re-check the states of the EV_SW switches after a device that was under an exclusive grab is released back to us, since we got no input events from that device while it was grabbed. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rfkill: yet more minor kernel-doc fixesHenrique de Moraes Holschuh
For some stupid reason, I sent and old version of the patch minor kernel doc-fix patch, and it got merged before I noticed the problem. This is an incremental fix on top. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rfkill: mutex fixesHenrique de Moraes Holschuh
There are two mutexes in rfkill: rfkill->mutex, which protects some of the fields of a rfkill struct, and is also used for callback serialization. rfkill_mutex, which protects the global state, the list of registered rfkill structs and rfkill->claim. Make sure to use the correct mutex, and to not miss locking rfkill->mutex even when we already took rfkill_mutex. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rfkill: fix led-trigger unregister order in error unwindHenrique de Moraes Holschuh
rfkill needs to unregister the led trigger AFTER a call to rfkill_remove_switch(), otherwise it will not update the LED state, possibly leaving it ON when it should be OFF. To make led-trigger unregistering safer, guard against unregistering a trigger twice, and also against issuing trigger events to a led trigger that was unregistered. This makes the error unwind paths more resilient. Refer to "rfkill: Register LED triggers before registering switch". Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rfkill: document rfkill_force_state as required (v2)Henrique de Moraes Holschuh
While the rfkill class does work with just get_state(), it doesn't work well on devices that are subject to external events that cause rfkill state changes. Document that rfkill_force_state() is required in those cases. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rfkill: ignore errors from rfkill_toggle_radio in rfkill_add_switchHenrique de Moraes Holschuh
rfkill_add_switch() calls rfkill_toggle_radio() to set the state of a recently registered rfkill class to the current global state [for that rfkill->type]. The rfkill_toggle_radio() call is going to error out if the hardware is RFKILL_STATE_HARD_BLOCKED, and the global state is RFKILL_STATE_UNBLOCKED. That is a quite normal situation which I missed to account for. As things stand, the error return from rfkill_toggle_radio ends up causing rfkill_register to bail out with an error (de-registering the new switch in the process), which is Not Nice. Change rfkill_add_switch() to not return errors because of a failed call to rfkill_toggle_radio(). We can go back to returning errors again (if that's indeed the right thing to do) if we define the exact error codes the rfkill->toggle_radio callbacks are to return in each situation, so that we can ignore the right ones only. Bug reported by "kionez <kionez@anche.no>". Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: kionez <kionez@anche.no> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rfkill: some minor kernel-doc changes for rfkill_toggle_radioHenrique de Moraes Holschuh
Improve rfkill_toggle_radio's kernel-doc header a bit. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: rename the rfkill_state states and add block-locked stateHenrique de Moraes Holschuh
The current naming of rfkill_state causes a lot of confusion: not only the "kill" in rfkill suggests negative logic, but also the fact that rfkill cannot turn anything on (it can just force something off or stop forcing something off) is often forgotten. Rename RFKILL_STATE_OFF to RFKILL_STATE_SOFT_BLOCKED (transmitter is blocked and will not operate; state can be changed by a toggle_radio request), and RFKILL_STATE_ON to RFKILL_STATE_UNBLOCKED (transmitter is not blocked, and may operate). Also, add a new third state, RFKILL_STATE_HARD_BLOCKED (transmitter is blocked and will not operate; state cannot be changed through a toggle_radio request), which is used by drivers to indicate a wireless transmiter was blocked by a hardware rfkill line that accepts no overrides. Keep the old names as #defines, but document them as deprecated. This way, drivers can be converted to the new names *and* verified to actually use rfkill correctly one by one. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: do not allow userspace to override ALL RADIOS OFFHenrique de Moraes Holschuh
SW_RFKILL_ALL is the "emergency power-off all radios" input event. It must be handled, and must always do the same thing as far as the rfkill system is concerned: all transmitters are to go *immediately* offline. For safety, do NOT allow userspace to override EV_SW SW_RFKILL_ALL OFF. As long as rfkill-input is loaded, that event will *always* be processed, and it will *always* force all rfkill switches to disable all wireless transmitters, regardless of user_claim attribute or anything else. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: drop current_state from tasks in rfkill-inputFabien Crespel
The whole current_state thing seems completely useless and a source of problems in rfkill-input, since state comparison is already done in rfkill, and rfkill-input is more than likely to become out of sync with the real state. Signed-off-by: Fabien Crespel <fabien@crespel.net> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: add uevent notificationsHenrique de Moraes Holschuh
Use the notification chains to also send uevents, so that userspace can be notified of state changes of every rfkill switch. Userspace should use these events for OSD/status report applications and rfkill GUI frontends. HAL might want to broadcast them over DBUS, for example. It might be also useful for userspace implementations of rfkill-input, or to use HAL as the platform driver which promotes rfkill switch change events into input events (to synchronize all other switches) when necessary for platforms that lack a convenient platform-specific kernel module to do it. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: add type string helperHenrique de Moraes Holschuh
We will need access to the rfkill switch type in string format for more than just sysfs. Therefore, move it to a generic helper. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: add notifier chains supportHenrique de Moraes Holschuh
Add a notifier chain for use by the rfkill class. This notifier chain signals the following events (more to be added when needed): 1. rfkill: rfkill device state has changed A pointer to the rfkill struct will be passed as a parameter. The notifier message types have been added to include/linux/rfkill.h instead of to include/linux/notifier.h in order to avoid the madness of modifying a header used globally (and that triggers an almost full tree rebuild every time it is touched) with information that is of interest only to code that includes the rfkill.h header. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: rework suspend and resume handlersHenrique de Moraes Holschuh
The resume handler should reset the wireless transmitter rfkill state to exactly what it was when the system was suspended. Do it, and do it using the normal routines for state change while at it. The suspend handler should force-switch the transmitter to blocked state, ignoring caches. Do it. Also take an opportunity shot to rfkill_remove_switch() and also force the transmitter to blocked state there, bypassing caches. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: add the WWAN radio typeHenrique de Moraes Holschuh
Unfortunately, instead of adding a generic Wireless WAN type, a technology- specific type (WiMAX) was added. That's useless for other WWAN devices, such as EDGE, UMTS, X-RTT and other such radios. Add a WWAN rfkill type for generic wireless WAN devices. No keys are added as most devices really want to use KEY_WLAN for WWAN control (in a cycle of none, WLAN, WWAN, WLAN+WWAN) and need no specific keycode added. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Iñaky Pérez-González <inaky.perez-gonzalez@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: add read-write rfkill switch supportHenrique de Moraes Holschuh
Currently, rfkill support for read/write rfkill switches is hacked through a round-trip over the input layer and rfkill-input to let a driver sync rfkill->state to hardware changes. This is buggy and sub-optimal. It causes real problems. It is best to think of the rfkill class as supporting only write-only switches at the moment. In order to implement the read/write functionality properly: Add a get_state() hook that is called by the class every time it needs to fetch the current state of the switch. Add a call to this hook every time the *current* state of the radio plays a role in a decision. Also add a force_state() method that can be used to forcefully syncronize the class' idea of the current state of the switch. This allows for a faster implementation of the read/write functionality, as a driver which get events on switch changes can avoid the need for a get_state() hook. If the get_state() hook is left as NULL, current behaviour is maintained, so this change is fully backwards compatible with the current rfkill drivers. For hardware that issues events when the rfkill state changes, leave get_state() NULL in the rfkill struct, set the initial state properly before registering with the rfkill class, and use the force_state() method in the driver to keep the rfkill interface up-to-date. get_state() can be called by the class from atomic context. It must not sleep. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: add parameter to disable radios by defaultHenrique de Moraes Holschuh
Currently, radios are always enabled when their rfkill interface is registered. This is not optimal, the safest state for a radio is to be offline unless the user turns it on. Add a module parameter that causes all radios to be disabled when their rfkill interface is registered. The module default is not changed so unless the parameter is used, radios will still be forced to their enabled state when they are registered. The new rfkill module parameter is called "default_state". Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: handle SW_RFKILL_ALL eventsHenrique de Moraes Holschuh
Teach rfkill-input how to handle SW_RFKILL_ALL events (new name for the SW_RADIO event). SW_RFKILL_ALL is an absolute enable-or-disable command that is tied to all radios in a system. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26rfkill: fix minor typo in kernel docHenrique de Moraes Holschuh
Fix a minor typo in an exported function documentation Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-15rfkill: Fix device type check when toggling statesCarlos Corbacho
rfkill_switch_all() is supposed to only switch all the interfaces of a given type, but does not actually do this; instead, it just switches everything currently in the same state. Add the necessary type check in. (This fixes a bug I've been seeing while developing an rfkill laptop driver, with both bluetooth and wireless simultaneously changing state after only pressing either KEY_WLAN or KEY_BLUETOOTH). Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-23PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-03typo fix in net/rfkill/rfkill.cOliver Pinter
Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-01-31rfkill: add the WiMAX radio typeIñaky Pérez-González
Teach rfkill about wimax radios. Had to define a KEY_WIMAX as a 'key for disabling only wimax radios', as other radio technologies have. This makes sense as hardware has specific keys for disabling specific radios. The RFKILL enabling part is, otherwise, a copy and paste of any other radio technology. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20rfkill: call rfkill_led_trigger_unregister() on errorEric Paris
Code inspection turned up that error cases in rfkill_register() do not call rfkill_led_trigger_unregister() even though we have already registered. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29rfkill: fix double-mutex-lockingMichael Buesch
rfkill_toggle_radio is called from functions where rfkill->mutex is already aquired. Remove the lock from rfkill_toggle_radio() and add it to the only calling function that calls it without the lock held. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10rfkill: Fix sparse warningMichael Buesch
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10rfkill: Use mutex_lock() at register and add sanity checkMichael Buesch
Replace mutex_lock_interruptible() by mutex_lock() in rfkill_register(), as interruptible doesn't make sense there. Add a sanity check for rfkill->type, as that's used for an unchecked dereference in an array and might cause hard to debug crashes if the driver sets this to an invalid value. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>