aboutsummaryrefslogtreecommitdiff
path: root/net/sctp/transport.c
AgeCommit message (Collapse)Author
2009-11-29Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/ieee802154/fakehard.c drivers/net/e1000e/ich8lan.c drivers/net/e1000e/phy.c drivers/net/netxen/netxen_nic_init.c drivers/net/wireless/ath/ath9k/main.c
2009-11-29sctp: on T3_RTX retransmit all the in-flight chunksAndrei Pelinescu-Onciul
When retransmitting due to T3 timeout, retransmit all the in-flight chunks for the corresponding transport/path, including chunks sent less then 1 rto ago. This is the correct behaviour according to rfc4960 section 6.3.3 E3 and "Note: Any DATA chunks that were sent to the address for which the T3-rtx timer expired but did not fit in one MTU (rule E3 above) should be marked for retransmission and sent as soon as cwnd allows (normally, when a SACK arrives). ". This fixes problems when more then one path is present and the T3 retransmission of the first chunk that timeouts stops the T3 timer for the initial active path, leaving all the other in-flight chunks waiting forever or until a new chunk is transmitted on the same path and timeouts (and this will happen only if the cwnd allows sending new chunks, but since cwnd was dropped to MTU by the timeout => it will wait until the first heartbeat). Example: 10 packets in flight, sent at 0.1 s intervals on the primary path. The primary path is down and the first packet timeouts. The first packet is retransmitted on another path, the T3 timer for the primary path is stopped and cwnd is set to MTU. All the other 9 in-flight packets will not be retransmitted (unless more new packets are sent on the primary path which depend on cwnd allowing it, and even in this case the 9 packets will be retransmitted only after a new packet timeouts which even in the best case would be more then RTO). This commit reverts d0ce92910bc04e107b2f3f2048f07e94f570035d and also removes the now unused transport->last_rto, introduced in b6157d8e03e1e780660a328f7183bcbfa4a93a19. p.s The problem is not only when multiple paths are there. It can happen in a single homed environment. If the application stops sending data, it possible to have a hung association. Signed-off-by: Andrei Pelinescu-Onciul <andrei@iptel.org> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23sctp: Update max.burst implementationVlad Yasevich
Current implementation of max.burst ends up limiting new data during cwnd decay period. The decay is happening becuase the connection is idle and we are allowed to fill the congestion window. The point of max.burst is to limit micro-bursts in response to large acks. This still happens, as max.burst is still applied to each transmit opportunity. It will also apply if a very large send is made (greater then allowed by burst). Tested-by: Florian Niederbacher <florian.niederbacher@student.uibk.ac.at> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: Remove useless last_time_used variableVlad Yasevich
The transport last_time_used variable is rather useless. It was only used when determining if CWND needs to be updated due to idle transport. However, idle transport detection was based on a Heartbeat timer and last_time_used was not incremented when sending Heartbeats. As a result the check for cwnd reduction was always true. We can get rid of the variable and just base our cwnd manipulation on the HB timer (like the code comment sais). We also have to call into the cwnd manipulation function regardless of whether HBs are enabled or not. That way we will detect idle transports if the user has disabled Heartbeats. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-13sctp: Set socket source address when additing first transportVlad Yasevich
Recent commits sctp: Get rid of an extra routing lookup when adding a transport and sctp: Set source addresses on the association before adding transports changed when routes are added to the sctp transports. As such, we didn't set the socket source address correctly when adding the first transport. The first transport is always the primary/active one, so when adding it, set the socket source address. This was causing regression failures in SCTP tests. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-04sctp: Clear fast_recovery on the transport when T3 timer expires.Vlad Yasevich
If T3 timer expires, we are retransmitting data due to timeout any any fast recovery is null and void. We can clear the fast recovery flag. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-03-02sctp: use time_before or time_after for comparing jiffiesWei Yongjun
The functions time_before or time_after are more robust for comparing jiffies against other values. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-16sctp: Fix the RTO-doubling on idle-link heartbeatsVlad Yasevich
SCTP incorrectly doubles rto ever time a Hearbeat chunk is generated. However RFC 4960 states: On an idle destination address that is allowed to heartbeat, it is recommended that a HEARTBEAT chunk is sent once per RTO of that destination address plus the protocol parameter 'HB.interval', with jittering of +/- 50% of the RTO value, and exponential backoff of the RTO if the previous HEARTBEAT is unanswered. Essentially, of if the heartbean is unacknowledged, do we double the RTO. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-18sctp: Prevent uninitialized memory accessFlorian Westphal
valgrind reports uninizialized memory accesses when running sctp inside the network simulation cradle simulator: Conditional jump or move depends on uninitialised value(s) at 0x570E34A: sctp_assoc_sync_pmtu (associola.c:1324) by 0x57427DA: sctp_packet_transmit (output.c:403) by 0x5710EFF: sctp_outq_flush (outqueue.c:824) by 0x5710B88: sctp_outq_uncork (outqueue.c:701) by 0x5745262: sctp_cmd_interpreter (sm_sideeffect.c:1548) by 0x57444B7: sctp_side_effects (sm_sideeffect.c:976) by 0x5744460: sctp_do_sm (sm_sideeffect.c:945) by 0x572157D: sctp_primitive_ASSOCIATE (primitive.c:94) by 0x5725C04: __sctp_connect (socket.c:1094) by 0x57297DC: sctp_connect (socket.c:3297) Conditional jump or move depends on uninitialised value(s) at 0x575D3A5: mod_timer (timer.c:630) by 0x5752B78: sctp_cmd_hb_timers_start (sm_sideeffect.c:555) by 0x5754133: sctp_cmd_interpreter (sm_sideeffect.c:1448) by 0x5753607: sctp_side_effects (sm_sideeffect.c:976) by 0x57535B0: sctp_do_sm (sm_sideeffect.c:945) by 0x571E9AE: sctp_endpoint_bh_rcv (endpointola.c:474) by 0x573347F: sctp_inq_push (inqueue.c:104) by 0x572EF93: sctp_rcv (input.c:256) by 0x5689623: ip_local_deliver_finish (ip_input.c:230) by 0x5689759: ip_local_deliver (ip_input.c:268) by 0x5689CAC: ip_rcv_finish (dst.h:246) #1 is due to "if (t->pmtu_pending)". 8a4794914f9cf2681235ec2311e189fe307c28c7 "[SCTP] Flag a pmtu change request" suggests it should be initialized to 0. #2 is the heartbeat timer 'expires' value, which is uninizialised, but test by mod_timer(). T3_rtx_timer seems to be affected by the same problem, so initialize it, too. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04sctp: Start T3-RTX timer when fast retransmitting lowest TSNVlad Yasevich
When we are trying to fast retransmit the lowest outstanding TSN, we need to restart the T3-RTX timer, so that subsequent timeouts will correctly tag all the packets necessary for retransmissions. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Tested-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04sctp: Correctly implement Fast Recovery cwnd manipulations.Vlad Yasevich
Correctly keep track of Fast Recovery state and do not reduce congestion window multiple times during sucht state. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Tested-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-05[SCTP]: Fix NULL dereference of asoc.YOSHIFUJI Hideaki
Commit 7cbca67c073263c179f605bdbbdc565ab29d801d ("[IPV6]: Support Source Address Selection API (RFC5014)") introduced NULL dereference of asoc to sctp_v6_get_saddr in net/sctp/ipv6.c. Pointed out by Johann Felix Soden <johfel@users.sourceforge.net>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-05net: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05[SCTP]: Stop claiming that this is a "reference implementation"Vlad Yasevich
I was notified by Randy Stewart that lksctp claims to be "the reference implementation". First of all, "the refrence implementation" was the original implementation of SCTP in usersapce written ty Randy and a few others. Second, after looking at the definiton of 'reference implementation', we don't really meet the requirements. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-01-28[NET]: Convert init_timer into setup_timerPavel Emelyanov
Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07SCTP: Fix difference cases of retransmit.Vlad Yasevich
Commit d0ce92910bc04e107b2f3f2048f07e94f570035d broke several retransmit cases including fast retransmit. The reason is that we should only delay by rto while doing retranmists as a result of a timeout. Retransmit as a result of path mtu discover, fast retransmit, or other evernts that should trigger immidiate retransmissions got broken. Also, since rto is doubled prior to marking of packets elegable for retransmission, we never marked correct chunks anyway. The fix is provide a reason for a given retransmission so that we can mark chunks appropriately and to save the old rto value to do comparisons against. All regressions tests passed with this code. Spotted by Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-13[SCTP] Don't disable PMTU discovery when mtu is smallVlad Yasevich
Right now, when we receive a mtu estimate smaller then minim threshold in the ICMP message, we disable the path mtu discovery on the transport. This leads to the never increasing sctp fragmentation point even when the real path mtu has increased. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-13[SCTP] Update pmtu handling to be similar to tcpVlad Yasevich
Introduce new function sctp_transport_update_pmtu that updates the transports and destination caches view of the path mtu. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-04-25[NET]: cleanup extra semicolonsStephen Hemminger
Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22[SCTP]: Correctly reset ssthresh when restarting associationVlad Yasevich
Reset ssthresh to the correct value (peer's a_rwnd) when restarting association. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-20[SCTP]: Reset some transport and association variables on restartVlad Yasevich
If the association has been restarted, we need to reset the transport congestion variables as well as accumulated error counts and CACC variables. If we do not, the association will use the wrong values and may terminate prematurely. This was found with a scenario where the peer restarted the association when lksctp was in the last HB timeout for its association. The restart happened, but the error counts have not been reset and when the timeout occurred, a newly restarted association was terminated due to excessive retransmits. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10[NET] SCTP: Fix whitespace errors.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[SCTP]: Remove multiple levels of msecs to jiffies conversions.Vladislav Yasevich
The SCTP sysctl entries are displayed in milliseconds, but stored internally in jiffies. This results in multiple levels of msecs to jiffies conversion and as a result produces a truncation error. This patch makes things consistent in that we store and display defaults in milliseconds and only convert once for use by association. This patch also adds some sane min/max values so that we don't go off the deep end. Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[SCTP]: Verify all the paths to a peer via heartbeat before using them.Sridhar Samudrala
This patch implements Path Initialization procedure as described in Sec 2.36 of RFC4460. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-17[SCTP]: Fix bad sysctl formatting of SCTP timeout values on 64-bit m/cs.Vlad Yasevich
Change all the structure members that hold jiffies to be of type unsigned long. This also corrects bad sysctl formating on 64 bit architectures. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
2006-01-03[SCTP]: Update SCTP_PEER_ADDR_PARAMS socket option to the latest api draft.Frank Filz
This patch adds support to set/get heartbeat interval, maximum number of retransmissions, pathmtu, sackdelay time for a particular transport/ association/socket as per the latest SCTP sockets api draft11. Signed-off-by: Frank Filz <ffilz@us.ibm.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-02[SCTP]: Fix getsockname for sctp when an ipv6 socket accepts a connection fromNeil Horman
an ipv4 socket. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-08[PATCH] gfp flags annotations - part 1Al Viro
- added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-11[SCTP]: __nocast annotationsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-28[SCTP] Make init & delayed sack timeouts configurable by user.Vlad Yasevich
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-20[SCTP] sctp_connectx() API supportFrank Filz
Implements sctp_connectx() as defined in the SCTP sockets API draft by tunneling the request through a setsockopt(). Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!