aboutsummaryrefslogtreecommitdiff
path: root/net/sctp
AgeCommit message (Collapse)Author
2009-09-14net: constify struct inet6_protocolAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14net: constify struct net_protocolAlexey Dobriyan
Remove long removed "inet_protocol_base" declaration. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-04sctp: Catch bogus stream sequence numbersVlad Yasevich
Since our TSN map is capable of holding at most a 4K chunk gap, there is no way that during this gap, a stream sequence number (unsigned short) can wrap such that the new number is smaller then the next expected one. If such a case is encountered, this is a protocol violation. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: remove dup code in net/sctp/output.cWei Yongjun
Use sctp_packet_reset() instead of dup code. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Sysctl configuration for IPv4 Address ScopingBhaskar Dutta
This patch introduces a new sysctl option to make IPv4 Address Scoping configurable <draft-stewart-tsvwg-sctp-ipv4-00.txt>. In networking environments where DNAT rules in iptables prerouting chains convert destination IP's to link-local/private IP addresses, SCTP connections fail to establish as the INIT chunk is dropped by the kernel due to address scope match failure. For example to support overlapping IP addresses (same IP address with different vlan id) a Layer-5 application listens on link local IP's, and there is a DNAT rule that maps the destination IP to a link local IP. Such applications never get the SCTP INIT if the address-scoping draft is strictly followed. This sysctl configuration allows SCTP to function in such unconventional networking environments. Sysctl options: 0 - Disable IPv4 address scoping draft altogether 1 - Enable IPv4 address scoping (default, current behavior) 2 - Enable address scoping but allow IPv4 private addresses in init/init-ack 3 - Enable address scoping but allow IPv4 link local address in init/init-ack Signed-off-by: Bhaskar Dutta <bhaskar.dutta@globallogic.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Get rid of an extra routing lookup when adding a transport.Vlad Yasevich
We used to perform 2 routing lookups for a new transport: one just for path mtu detection, and one to actually route to destination and path mtu update when sending a packet. There is no point in doing both of them, especially since the first one just for path mtu doesn't take into account source address and sometimes gives the wrong route, causing path mtu updates anyway. We now do just the one call to do both route to destination and get path mtu updates. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Correctly track if AUTH has been bundled.Vlad Yasevich
We currently track if AUTH has been bundled using the 'auth' pointer to the chunk. However, AUTH is disallowed after DATA is already in the packet, so we need to instead use the 'has_auth' field. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: fix to reset packet information after packet transmitWei Yongjun
The packet information does not reset after packet transmit, this may cause some problems such as following DATA chunk be sent without AUTH chunk, even if the authentication of DATA chunk has been requested by the peer. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Failover transmitted list on transport deleteVlad Yasevich
Add-IP feature allows users to delete an active transport. If that transport has chunks in flight, those chunks need to be moved to another transport or association may get into unrecoverable state. Reported-by: Rafael Laufer <rlaufer@cisco.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Fix SCTP_MAXSEG socket option to comply to spec.Vlad Yasevich
We had a bug that we never stored the user-defined value for MAXSEG when setting the value on an association. Thus future PMTU events ended up re-writing the frag point and increasing it past user limit. Additionally, when setting the option on the socket/endpoint, we effect all current associations, which is against spec. Now, we store the user 'maxseg' value along with the computed 'frag_point'. We inherit 'maxseg' from the socket at association creation and use it as an upper limit for 'frag_point' when its set. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Don't do NAGLE delay on large writes that were fragmented smallVlad Yasevich
SCTP will delay the last part of a large write due to NAGLE, if that part is smaller then MTU. Since we are doing large writes, we might as well send the last portion now instead of waiting untill the next large write happens. The small portion will be sent as is regardless, so it's better to not delay it. This is a result of much discussions with Wei Yongjun <yjwei@cn.fujitsu.com> and Doug Graham <dgraham@nortel.com>. Many thanks go out to them. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Nagle delay should be based on path mtuVlad Yasevich
The decision to delay due to Nagle should be based on the path mtu and future packet size. We currently incorrectly base it on 'frag_point' which is the SCTP DATA segment size, and also we do not count DATA chunk header overhead in the computation. This actuall allows situations where a user can set low 'frag_point', and then send small messages without delay. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.Vlad Yasevich
We currently set a_rwnd to 0 when faking a SACK from SHUTDOWN. This results in an hung association if the remote only uses SHUTDOWNs (which it's allowed to do) to acknowlege DATA when closing. The reason for that is that we simply honor the a_rwnd from the sack, but since we faked it to be 0, we enter 0-window probing. The fix is to use the peers old rwnd and add our flight size to it. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: drop a_rwnd to 0 when receive buffer overflows.Vlad Yasevich
SCTP has a problem that when small chunks are used, it is possible to exhaust the receiver buffer without fully closing receive window. This happens due to all overhead that we have account for with small messages. To fix this, when receive buffer is exceeded, we'll drop the window to 0 and save the 'drop' portion. When application starts reading data and freeing up recevie buffer space, we'll wait until we've reached the 'drop' window and then add back this 'drop' one mtu at a time. This worked well in testing and under stress produced rather even recovery. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Clear fast_recovery on the transport when T3 timer expires.Vlad Yasevich
If T3 timer expires, we are retransmitting data due to timeout any any fast recovery is null and void. We can clear the fast recovery flag. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Fix error count increments that were results of HEARTBEATSVlad Yasevich
SCTP RFC 4960 states that unacknowledged HEARTBEATS count as errors agains a given transport or endpoint. As such, we should increment the error counts for only for unacknowledged HB, otherwise we detect failure too soon. This goes for both the overall error count and the path error count. Now, there is a difference in how the detection is done between the two. The path error detection is done after the increment, so to detect it properly, we actually need to exceed the path threshold. The overall error detection is done _BEFORE_ the increment. Thus to detect the failure, it's enough for the error count to match the threshold. This is why all the state functions use '>=' to detect failure, while path detection uses '>'. Thanks goes to Chunbo Luo <chunbo.luo@windriver.com> who first proposed patches to fix this issue and made me re-read the spec and the code to figure out how this cruft really works. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: use proc_create()Alexey Dobriyan
create_proc_entry() is deprecated (not formally, though). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: fix check the chunk length of received HEARTBEAT-ACK chunkWei Yongjun
The receiver of the HEARTBEAT should respond with a HEARTBEAT ACK that contains the Heartbeat Information field copied from the received HEARTBEAT chunk. So the received HEARTBEAT-ACK chunk must have a length of: sizeof(sctp_chunkhdr_t) + sizeof(sctp_sender_hb_info_t) A badly formatted HB-ACK chunk, it is possible that we may access invalid memory. We should really make sure that the chunk format is what we expect, before attempting to touch the data. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: drop SHUTDOWN chunk if the TSN is less than the CTSNWei Yongjun
If Cumulative TSN Ack field of SHUTDOWN chunk is less than the Cumulative TSN Ack Point then drop the SHUTDOWN chunk. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Send user messages to the lower layer as oneVlad Yasevich
Currenlty, sctp breaks up user messages into fragments and sends each fragment to the lower layer by itself. This means that for each fragment we go all the way down the stack and back up. This also discourages bundling of multiple fragments when they can fit into a sigle packet (ex: due to user setting a low fragmentation threashold). We introduce a new command SCTP_CMD_SND_MSG and hand the whole message down state machine. The state machine and the side-effect parser will cork the queue, add all chunks from the message to the queue, and then un-cork the queue thus causing the chunks to get transmitted. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Try to encourage SACK bundling with DATA.Vlad Yasevich
If the association has a SACK timer pending and now DATA queued to be send, we'll try to bundle the SACK with the next application send. As such, try encourage bundling by accounting for SACK in the size of the first chunk fragment. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Generate SACKs when actually sending outbound DATAVlad Yasevich
We are now trying to bundle SACKs when we have outbound DATA to send. However, there are situations where this outbound DATA will not be sent (due to congestion or available window). In such cases it's ok to wait for the timer to expire. This patch refactors the sending code so that betfore attempting to bundle the SACK we check to see if the DATA will actually be transmitted. Based on eirlier works for Doug Graham <dgraham@nortel.com> and Wei Youngjun <yjwei@cn.fujitsu.com>. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Fix data segmentation with small frag_sizeVlad Yasevich
Since an application may specify the maximum SCTP fragment size that all data should be fragmented to, we need to fix how we do segmentation. Right now, if a user specifies a small fragment size, the segment size can go negative in the presence of AUTH or COOKIE_ECHO bundling. What we need to do is track the largest possbile DATA chunk that can fit into the mtu. Then if the fragment size specified is bigger then this maximum length, we'll shrink it down. Otherwise, we just use the smaller segment size without changing it further. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Disallow new connection on a closing socketVlad Yasevich
If a socket has a lot of association that are in the process of of being closed/aborted, it is possible for a remote to establish new associations during the time period that the old ones are shutting down. If this was a result of a close() call, there will be no socket and will cause a memory leak. We'll prevent this by setting the socket state to CLOSING and disallow new associations when in this state. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: Fix piggybacked ACKsDoug Graham
This patch corrects the conditions under which a SACK will be piggybacked on a DATA packet. The previous condition was incorrect due to a misinterpretation of RFC 4960 and/or RFC 2960. Specifically, the following paragraph from section 6.2 had not been implemented correctly: Before an endpoint transmits a DATA chunk, if any received DATA chunks have not been acknowledged (e.g., due to delayed ack), the sender should create a SACK and bundle it with the outbound DATA chunk, as long as the size of the final SCTP packet does not exceed the current MTU. See Section 6.2. When about to send a DATA chunk, the code now checks to see if the SACK timer is running. If it is, we know we have a SACK to send to the peer, so we append the SACK (assuming available space in the packet) and turn off the timer. For a simple request-response scenario, this will result in the SACK being bundled with the response, meaning the the SACK is received quickly by the client, and also meaning that no separate SACK packet needs to be sent by the server to acknowledge the request. Prior to this patch, a separate SACK packet would have been sent by the server SCTP only after its delayed-ACK timer had expired (usually 200ms). This is wasteful of bandwidth, and can also have a major negative impact on performance due the interaction of delayed ACKs with the Nagle algorithm. Signed-off-by: Doug Graham <dgraham@nortel.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: release cached route when the transport goes down.Vlad Yasevich
When the sctp transport is marked down, we can release the cached route and force a new lookup when attempting to use this transport for anything. This way, if a better route or source address is available, we'll try to use it. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: update the route for non-active transports after addresses are addedWei Yongjun
Update the route and saddr entries for the non-active transports as some of the added addresses can be used as better source addresses, or may be there is a better route. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: check the unrecognized ASCONF parameter before access itWei Yongjun
This patch fix to check the unrecognized ASCONF parameter before access it. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04sctp: avoid overwrite the return value of sctp_process_asconf_ack()Wei Yongjun
The return value of sctp_process_asconf_ack() may be overwritten while process parameters with no error. This patch fixed the problem. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-09sctp: fix missing destroy of percpu counter variable in sctp_proc_exit()Rafael Laufer
Commit 1748376b6626acf59c24e9592ac67b3fe2a0e026, net: Use a percpu_counter for sockets_allocated added percpu_counter function calls to sctp_proc_init code path, but forgot to add them to sctp_proc_exit(). This resulted in a following Ooops when performing this test # modprobe sctp # rmmod -f sctp # modprobe sctp [ 573.862512] BUG: unable to handle kernel paging request at f8214a24 [ 573.862518] IP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70 [ 573.862530] *pde = 37010067 *pte = 00000000 [ 573.862534] Oops: 0002 [#1] SMP [ 573.862537] last sysfs file: /sys/module/libcrc32c/initstate [ 573.862540] Modules linked in: sctp(+) crc32c libcrc32c binfmt_misc bridge stp bnep lp snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss arc4 joydev snd_pcm ecb pcmcia snd_seq_dummy snd_seq_oss iwlagn iwlcore snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket rsrc_nonstatic thinkpad_acpi snd_seq snd_timer snd_seq_device mac80211 psmouse sdhci_pci sdhci nvidia(P) ppdev video snd soundcore serio_raw pcspkr iTCO_wdt iTCO_vendor_support led_class ricoh_mmc pcmcia_core intel_agp nvram agpgart usbhid parport_pc parport output snd_page_alloc cfg80211 btusb ohci1394 ieee1394 e1000e [last unloaded: sctp] [ 573.862589] [ 573.862593] Pid: 5373, comm: modprobe Tainted: P R (2.6.31-rc3 #6) 7663B15 [ 573.862596] EIP: 0060:[<c0308b8f>] EFLAGS: 00010286 CPU: 1 [ 573.862599] EIP is at __percpu_counter_init+0x3f/0x70 [ 573.862602] EAX: f8214a20 EBX: f80faa14 ECX: c48c0000 EDX: f80faa20 [ 573.862604] ESI: f80a7000 EDI: 00000000 EBP: f69d5ef0 ESP: f69d5eec [ 573.862606] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 573.862610] Process modprobe (pid: 5373, ti=f69d4000 task=c2130c70 task.ti=f69d4000) [ 573.862612] Stack: [ 573.862613] 00000000 f69d5f18 f80a70a8 f80fa9fc 00000000 fffffffc f69d5f30 c018e2d4 [ 573.862619] <0> 00000000 f80a7000 00000000 f69d5f88 c010112b 00000000 c07029c0 fffffffb [ 573.862626] <0> 00000000 f69d5f38 c018f83f f69d5f54 c0557cad f80fa860 00000001 c07010c0 [ 573.862634] Call Trace: [ 573.862644] [<f80a70a8>] ? sctp_init+0xa8/0x7d4 [sctp] [ 573.862650] [<c018e2d4>] ? marker_update_probe_range+0x184/0x260 [ 573.862659] [<f80a7000>] ? sctp_init+0x0/0x7d4 [sctp] [ 573.862662] [<c010112b>] ? do_one_initcall+0x2b/0x160 [ 573.862666] [<c018f83f>] ? tracepoint_module_notify+0x2f/0x40 [ 573.862671] [<c0557cad>] ? notifier_call_chain+0x2d/0x70 [ 573.862678] [<c01588fd>] ? __blocking_notifier_call_chain+0x4d/0x60 [ 573.862682] [<c016b2f1>] ? sys_init_module+0xb1/0x1f0 [ 573.862686] [<c0102ffc>] ? sysenter_do_call+0x12/0x28 [ 573.862688] Code: 89 48 08 b8 04 00 00 00 e8 df aa ec ff ba f4 ff ff ff 85 c0 89 43 14 74 31 b8 b0 18 71 c0 e8 19 b9 24 00 a1 c4 18 71 c0 8d 53 0c <89> 50 04 89 43 0c b8 b0 18 71 c0 c7 43 10 c4 18 71 c0 89 15 c4 [ 573.862725] EIP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70 SS:ESP 0068:f69d5eec [ 573.862730] CR2: 00000000f8214a24 [ 573.862734] ---[ end trace 39c4e0b55e7cf54d ]--- Signed-off-by: Rafael Laufer <rlaufer@cisco.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05net: mark read-only arrays as constJan Engelhardt
String literals are constant, and usually, we can also tag the array of pointers const too, moving it to the .rodata section. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06sctp: fix warning at inet_sock_destruct() while release sctp socketWei Yongjun
Commit 'net: Move rx skb_orphan call to where needed' broken sctp protocol with warning at inet_sock_destruct(). Actually, sctp can do this right with sctp_sock_rfree_frag() and sctp_skb_set_owner_r_frag() pair. sctp_sock_rfree_frag(skb); sctp_skb_set_owner_r_frag(skb, newsk); This patch not revert the commit d55d87fdff8252d0e2f7c28c2d443aee17e9d70f, instead remove the sctp_sock_rfree_frag() function. ------------[ cut here ]------------ WARNING: at net/ipv4/af_inet.c:151 inet_sock_destruct+0xe0/0x142() Modules linked in: sctp ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_mod ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 1808, comm: sctp_test Not tainted 2.6.31-rc2 #40 Call Trace: [<c042dd06>] warn_slowpath_common+0x6a/0x81 [<c064a39a>] ? inet_sock_destruct+0xe0/0x142 [<c042dd2f>] warn_slowpath_null+0x12/0x15 [<c064a39a>] inet_sock_destruct+0xe0/0x142 [<c05fde44>] __sk_free+0x19/0xcc [<c05fdf50>] sk_free+0x18/0x1a [<ca0d14ad>] sctp_close+0x192/0x1a1 [sctp] [<c0649f7f>] inet_release+0x47/0x4d [<c05fba4d>] sock_release+0x19/0x5e [<c05fbab3>] sock_close+0x21/0x25 [<c049c31b>] __fput+0xde/0x189 [<c049c3de>] fput+0x18/0x1a [<c049988f>] filp_close+0x56/0x60 [<c042f422>] put_files_struct+0x5d/0xa1 [<c042f49f>] exit_files+0x39/0x3d [<c043086a>] do_exit+0x1a5/0x5dd [<c04a86c2>] ? d_kill+0x35/0x3b [<c0438fa4>] ? dequeue_signal+0xa6/0x115 [<c0430d05>] do_group_exit+0x63/0x8a [<c0439504>] get_signal_to_deliver+0x2e1/0x2f9 [<c0401d9e>] do_notify_resume+0x7c/0x6b5 [<c043f601>] ? autoremove_wake_function+0x0/0x34 [<c04a864e>] ? __d_free+0x3d/0x40 [<c04a867b>] ? d_free+0x2a/0x3c [<c049ba7e>] ? vfs_write+0x103/0x117 [<c05fc8fa>] ? sys_socketcall+0x178/0x182 [<c0402a56>] work_notifysig+0x13/0x19 ---[ end trace 9db92c463e789fba ]--- Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-29sctp: xmit sctp packet always return no route errorWei Yongjun
Commit 'net: skb->dst accessors'(adf30907d63893e4208dfe3f5c88ae12bc2f25d5) broken the sctp protocol stack, the sctp packet can never be sent out after Eric Dumazet's patch, which have typo in the sctp code. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Vlad Yasevich <vladisalv.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23ipv6: Use correct data types for ICMPv6 type and codeBrian Haley
Change all the code that deals directly with ICMPv6 type and code values to use u8 instead of a signed int as that's the actual data type. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18net: correct off-by-one write allocations reportsEric Dumazet
commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. We need to take into account this offset when reporting sk_wmem_alloc to user, in PROC_FS files or various ioctls (SIOCOUTQ/TIOCOUTQ) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10sctp: protocol.c call rcu_barrier() on unload.Jesper Dangaard Brouer
On module unload call rcu_barrier(), this is needed as synchronize_rcu() is not strong enough. The kmem_cache_destroy() does invoke synchronize_rcu() but it does not provide same protection. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09sctp: Use frag list abstraction interfaces.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03sctp: support non-blocking version of the new sctp_connectx() APIVlad Yasevich
Prior implementation of the new sctp_connectx() call that returns an association ID did not work correctly on non-blocking socket. This is because we could not return both a EINPROGRESS error and an association id. This is a new implementation that supports this. Originally from Ivan Skytte Jørgensen <isj-sctp@i1.dk Signed-off-by: Ivan Skytte Jørgensen <isj-sctp@i1.dk Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03sctp: fix to choose alternate destination when retransmit ASCONF chunkWei Yongjun
RFC 5061 Section 5.1 ASCONF Chunk Procedures said: B4) Re-transmit the ASCONF Chunk last sent and if possible choose an alternate destination address (please refer to [RFC4960], Section 6.4.1). An endpoint MUST NOT add new parameters to this chunk; it MUST be the same (including its Sequence Number) as the last ASCONF sent. An endpoint MAY, however, bundle an additional ASCONF with new ASCONF parameters with the next Sequence Number. For details, see Section 5.5. This patch fix to choose an alternate destination address when re-transmit the ASCONF chunk, with some dup codes cleanup. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03sctp: fix sack_timeout sysctl min and max typesJean-Mickael Guerin
sctp_sack_timeout is defined as int, but the sysctl's maxsize is set to sizeof(long) and the min/max are defined as long. Signed-off-by: jean-mickael.guerin@6wind.com Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03sctp: fix panic when T4-rto timer expire on removed transportWei Yongjun
If T4-rto timer is expired on a removed transport, kernel panic will occur when we do failure management on that transport. You can reproduce this use the following sequence: Endpoint A Endpoint B (ESTABLISHED) (ESTABLISHED) <----------------- ASCONF (SRC=X) ASCONF -----------------> (Delete IP Address = X) <----------------- ASCONF-ACK (Success Indication) <----------------- ASCONF (T4-rto timer expire) This patch fixed the problem. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03sctp: fix panic when T2-shutdown timer expire on removed transportWei Yongjun
If T2-shutdown timer is expired on a removed transport, kernel panic will occur when we do failure management on that transport. You can reproduce this use the following sequence: Endpoint A Endpoint B (ESTABLISHED) (ESTABLISHED) <----------------- SHUTDOWN (SRC=X) ASCONF -----------------> (Delete IP Address = X) <----------------- ASCONF-ACK (Success Indication) <----------------- SHUTDOWN (T2-shutdown timer expire) This patch fixed the problem. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03sctp: fix to only enable IPv6 address support on PF_INET6 socketWei Yongjun
If socket is create by PF_INET type, it can not used IPv6 address to send/recv DATA. So only enable IPv6 address support on PF_INET6 socket. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03sctp: fix a typo in net/sctp/sm_statetable.cWei Yongjun
Just fix a typo in net/sctp/sm_statetable.c. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03sctp: fix the error code when ASCONF is received with invalid addressWei Yongjun
Use Unresolvable Address error cause instead of Invalid Mandatory Parameter error cause when process ASCONF chunk with invalid address since address parameters are not mandatory in the ASCONF chunk. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03sctp: fix report unrecognized parameter in ACSONF-ACKWei Yongjun
RFC5061 Section 5.2. Upon Reception of an ASCONF Chunk V2) In processing the chunk, the receiver should build a response message with the appropriate error TLVs, as specified in the Parameter type bits, for any ASCONF Parameter it does not understand. To indicate an unrecognized parameter, Cause Type 8 should be used as defined in the ERROR in Section 3.3.10.8, [RFC4960]. The endpoint may also use the response to carry rejections for other reasons, such as resource shortages, etc., using the Error Cause TLV and an appropriate error condition. So we should indicate an unrecognized parameter with error SCTP_ERROR_UNKNOWN_PARAM in ACSONF-ACK chunk, not SCTP_ERROR_INV_PARAM. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03net: skb->dst accessorsEric Dumazet
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net: skb->rtable accessorEric Dumazet
Define skb_rtable(const struct sk_buff *skb) accessor to get rtable from skb Delete skb->rtable field Setting rtable is not allowed, just set dst instead as rtable is an alias. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28sctp: add feature bit for SCTP offload in hardwareJesse Brandeburg
this is the sctp code to enable hardware crc32c offload for adapters that support it. Originally by: Vlad Yasevich <vladislav.yasevich@hp.com> modified by Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>