aboutsummaryrefslogtreecommitdiff
path: root/net/sunrpc
AgeCommit message (Collapse)Author
2005-11-10[NET]: Detect hardware rx checksum faults correctlyHerbert Xu
Here is the patch that introduces the generic skb_checksum_complete which also checks for hardware RX checksum faults. If that happens, it'll call netdev_rx_csum_fault which currently prints out a stack trace with the device name. In future it can turn off RX checksum. I've converted every spot under net/ that does RX checksum checks to use skb_checksum_complete or __skb_checksum_complete with the exceptions of: * Those places where checksums are done bit by bit. These will call netdev_rx_csum_fault directly. * The following have not been completely checked/converted: ipmr ip_vs netfilter dccp This patch is based on patches and suggestions from Stephen Hemminger and David S. Miller. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-09[PATCH] SUNRPC: don't reencode when looping in call transmit.Trond Myklebust
If the call to xprt_transmit() fails due to socket buffer space exhaustion, we do not need to re-encode the RPC message when we loop back through call_transmit. Re-encoding can actually end up triggering the WARN_ON() in call_decode() if we re-encode something like a read() request and auth->au_rslack has changed. It can also cause us to increment the RPCSEC_GSS sequence number beyond the limits of the allowed window. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sanitize lookup_hash prototypeChristoph Hellwig
->permission and ->lookup have a struct nameidata * argument these days to pass down lookup intents. Unfortunately some callers of lookup_hash don't actually pass this one down. For lookup_one_len() we don't have a struct nameidata to pass down, but as this function is a library function only used by filesystem code this is an acceptable limitation. All other callers should pass down the nameidata, so this patch changes the lookup_hash interface to only take a struct nameidata argument and derives the other two arguments to __lookup_hash from it. All callers already have the nameidata argument available so this is not a problem. At the same time I'd like to deprecate the lookup_hash interface as there are better exported interfaces for filesystem usage. Before it can actually be removed I need to fix up rpc_pipefs. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08[NET]: kfree cleanupJesper Juhl
From: Jesper Juhl <jesper.juhl@gmail.com> This is the net/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in net/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-11-07[PATCH] knfsd: make sure svc_process call the correct pg_authenticate for ↵NeilBrown
multi-service port If an RPC socket is serving multiple programs, then the pg_authenticate of the first program in the list is called, instead of pg_authenticate for the program to be run. This does not cause a problem with any programs in the current kernel, but could confuse future code. Also set pg_authenticate for nfsd_acl_program incase it ever gets used. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04NFS,SUNRPC,NLM: fix unused variable warnings when CONFIG_SYSCTL is disabledChuck Lever
Fix some dprintk's so that NLM, NFS client, and RPC client compile cleanly if CONFIG_SYSCTL is disabled. Test plan: Compile kernel with CONFIG_NFS enabled and CONFIG_SYSCTL disabled. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-11-04SUNRPC: allow sunrpc.o to link when CONFIG_SYSCTL is disabledChuck Lever
The sunrpc module should build properly even when CONFIG_SYSCTL is disabled. Reported by Jan-Benedict Glaw. Test plan: Compile kernel with CONFIG_NFS as a module and built-in, and CONFIG_SYSCTL enabled and disabled. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-30[CRYPTO] Simplify one-member scatterlist expressionsHerbert Xu
This patch rewrites various occurences of &sg[0] where sg is an array of length one to simply sg. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2005-10-30[PATCH] Use sg_set_buf/sg_init_one where applicableDavid Hardeman
This patch uses sg_set_buf/sg_init_one in some places where it was duplicated. Signed-off-by: David Hardeman <david@2gen.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2005-10-27RPC: Ensure that nobody can queue up new upcalls after rpc_close_pipes()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-27Merge /home/trondmy/scm/kernel/git/torvalds/linux-2.6Trond Myklebust
2005-10-27Revert "RPC: stops the release_pipe() funtion from being called twice"Trond Myklebust
This reverts 747c5534c9a6da4aa87e7cdc2209ea98ea27f381 commit.
2005-10-26[PATCH] svcsock timestamp fixAndrew Morton
Convert nanoseconds to microseconds correctly. Spotted by Steve Dickson <SteveD@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-18RPCSEC_GSS: krb5 cleanupJ. Bruce Fields
Remove some senseless wrappers. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18RPCSEC_GSS remove all qop parametersJ. Bruce Fields
Not only are the qop parameters that are passed around throughout the gssapi unused by any currently implemented mechanism, but there appears to be some doubt as to whether they will ever be used. Let's just kill them off for now. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18RPCSEC_GSS: Add support for privacy to krb5 rpcsec_gss mechanism.J. Bruce Fields
Add support for privacy to the krb5 rpcsec_gss mechanism. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18RPCSEC_GSS: krb5 pre-privacy cleanupJ. Bruce Fields
The code this was originally derived from processed wrap and mic tokens using the same functions. This required some contortions, and more would be required with the addition of xdr_buf's, so it's better to separate out the two code paths. In preparation for adding privacy support, remove the last vestiges of the old wrap token code. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18RPCSEC_GSS: Simplify rpcsec_gss crypto codeJ. Bruce Fields
Factor out some code that will be shared by privacy crypto routines Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18RPCSEC_GSS: client-side privacy supportJ. Bruce Fields
Add the code to the client side to handle privacy. This is dead code until we actually add privacy support to krb5. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18RPCSEC_GSS: cleanup au_rslack calculationJ. Bruce Fields
Various xdr encode routines use au_rslack to guess where the reply argument will end up, so we can set up the xdr_buf to recieve data into the right place for zero copy. Currently we calculate the au_rslack estimate when we check the verifier. Normally this only depends on the verifier size. In the integrity case we add a few bytes to allow for a length and sequence number. It's a bit simpler to calculate only the verifier size when we check the verifier, and delay the full calculation till we unwrap. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18SUNRPC: Retry wrap in case of memory allocation failure.J. Bruce Fields
For privacy we need to allocate extra pages to hold encrypted page data when wrapping requests. This allocation may fail, and we handle that case by waiting and retrying. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18SUNRPC: Provide a callback to allow free pages allocated during xdr encodingJ. Bruce Fields
For privacy, we need to allocate pages to store the encrypted data (passed in pages can't be used without the risk of corrupting data in the page cache). So we need a way to free that memory after the request has been transmitted. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18SUNRPC: Add support for privacy to generic gss-api code.J. Bruce Fields
Add support for privacy to generic gss-api code. This is dead code until we have both a mechanism that supports privacy and code in the client or server that uses it. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18RPC: stops the release_pipe() funtion from being called twiceSteve Dickson
This patch stops the release_pipe() funtion from being called twice by invalidating the ops pointer in the rpc_inode when rpc_pipe_release() is called. Signed-off-by: Steve Dickson <steved@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18RPC: allow call_encode() to delay transmission of an RPC call.Trond Myklebust
Currently, call_encode will cause the entire RPC call to abort if it returns an error. This is unnecessarily rigid, and gets in the way of attempts to allow the NFSv4 layer to order RPC calls that carry sequence ids. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18SUNRPC: Retry rpcbind requests if the server's portmapper isn't upChuck Lever
After a server crash/reboot, rebinding should always retry, otherwise requests on "hard" mounts will fail when they shouldn't. Test plan: Run a lock-intensive workload against a server while rebooting the server repeatedly. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18Merge /home/trondmy/scm/kernel/git/torvalds/linux-2.6Trond Myklebust
2005-10-08[PATCH] gfp flags annotations - part 1Al Viro
- added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-04[RPC]: fix sparse gfp nocast warningsRandy Dunlap
Fix nocast sparse warnings: net/rxrpc/call.c:2013:25: warning: implicit cast to nocast type net/rxrpc/connection.c:538:46: warning: implicit cast to nocast type net/sunrpc/sched.c:730:36: warning: implicit cast to nocast type net/sunrpc/sched.c:734:56: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-23SUNRPC: fix bug in patch "portmapper doesn't need a reserved port"Chuck Lever
The in-kernel portmapper does in fact need a reserved port when registering new services, but not when performing bind queries. Ensure that we distinguish between the two cases. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23Revert "[PATCH] RPC,NFS: new rpc_pipefs patch"Trond Myklebust
This reverts 17f4e6febca160a9f9dd4bdece9784577a2f4524 commit.
2005-09-23[PATCH] RPC,NFS: new rpc_pipefs patchChristoph Hellwig
Currently rpc_mkdir/rpc_rmdir and rpc_mkpipe/mk_unlink have an API that's a little unfortunate. They take a path relative to the rpc_pipefs root and thus need to perform a full lookup. If you look at debugfs or usbfs they always store the dentry for directories they created and thus can pass in a dentry + single pathname component pair into their equivalents of the above functions. And in fact rpc_pipefs actually stores a dentry for all but one component so this change not only simplifies the core rpc_pipe code but also the callers. Unfortuntately this code path is only used by the NFS4 idmapper and AUTH_GSSAPI for which I don't have a test enviroment. Could someone give it a spin? It's the last bit needed before we can rework the lookup_hash API Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: rationalize set_buffer_sizeChuck Lever
In fact, ->set_buffer_size should be completely functionless for non-UDP. Test-plan: Check socket buffer size on UDP sockets over time. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: parametrize various transport connect timeoutsChuck Lever
Each transport implementation can now set unique bind, connect, reestablishment, and idle timeout values. These are variables, allowing the values to be modified dynamically. This permits exponential backoff of any of these values, for instance. As an example, we implement exponential backoff for the connection reestablishment timeout. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: make sure to get the same local port number when reconnectingChuck Lever
Implement a best practice: if the remote end drops our connection, try to reconnect using the same port number. This is important because the NFS server's Duplicate Reply Cache often hashes on the source port number. If the client reuses the port number when it reconnects, the server's DRC will be more effective. Based on suggestions by Mike Eisler, Olaf Kirch, and Alexey Kuznetsky. Test-plan: Destructive testing. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: allow RPC client's port range to be adjustableChuck Lever
Select an RPC client source port between 650 and 1023 instead of between 1 and 800. The old range conflicts with a number of network services. Provide sysctls to allow admins to select a different port range. Note that this doesn't affect user-level RPC library behavior, which still uses 1 to 800. Based on a suggestion by Olaf Kirch <okir@suse.de>. Test-plan: Repeated mount and unmount. Destructive testing. Idle timeouts. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: clean up after nocong was removedChuck Lever
Clean-up: Move some macros that are specific to the Van Jacobson implementation into xprt.c. Get rid of the cong_wait field in rpc_xprt, which is no longer used. Get rid of xprt_clear_backlog. Test-plan: Compile with CONFIG_NFS enabled. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: remove xprt->nocongChuck Lever
Get rid of the "xprt->nocong" variable. Test-plan: Use WAN simulation to cause sporadic bursty packet loss with UDP mounts. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: add a release_rqst callout to the RPC transport switchChuck Lever
The final place where congestion control state is adjusted is in xprt_release, where each request is finally released. Add a callout there to allow transports to perform additional processing when a request is about to be released. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: add generic interface for adjusting the congestion windowChuck Lever
A new interface that allows transports to adjust their congestion window using the Van Jacobson implementation in xprt.c is provided. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: separate xprt_timer implementationsChuck Lever
Allow transports to hook the retransmit timer interrupt. Some transports calculate their congestion window here so that a retransmit timeout has immediate effect on the congestion window. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: expose API for serializing access to RPC transportsChuck Lever
The next method we abstract is the one that releases a transport, allowing another task to have access to the transport. Again, one generic version of this is provided for transports that don't need the RPC client to perform congestion control, and one version is for transports that can use the original Van Jacobson implementation in xprt.c. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: expose API for serializing access to RPC transportsChuck Lever
The next several patches introduce an API that allows transports to choose whether the RPC client provides congestion control or whether the transport itself provides it. The first method we abstract is the one that serializes access to the RPC transport to prevent the bytes from different requests from mingling together. This method provides proper request serialization and the opportunity to prevent new requests from being started because the transport is congested. The normal situation is for the transport to handle congestion control itself. Although NFS over UDP was first, it has been recognized after years of experience that having the transport provide congestion control is much better than doing it in the RPC client. Thus TCP, and probably every future transport implementation, will use the default method, xprt_lock_write, provided in xprt.c, which does not provide any kind of congestion control. UDP can continue using the xprt.c-provided Van Jacobson congestion avoidance implementation. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: add API to set transport-specific timeoutsChuck Lever
Prepare the way to remove the "xprt->nocong" variable by adding a callout to the RPC client transport switch API to handle setting RPC retransmit timeouts. Add a pair of generic helper functions that provide the ability to set a simple fixed timeout, or to set a timeout based on the state of a round- trip estimator. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: get rid of xprt->streamChuck Lever
Now we can fix up the last few places that use the "xprt->stream" variable, and get rid of it from the rpc_xprt structure. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: skip over transport-specific heads automaticallyChuck Lever
Add a generic mechanism for skipping over transport-specific headers when constructing an RPC request. This removes another "xprt->stream" dependency. Test-plan: Write-intensive workload on a single mount point (try both UDP and TCP). Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: separate TCP and UDP socket write pathsChuck Lever
Split the RPC client's main socket write path into a TCP version and a UDP version to eliminate another dependency on the "xprt->stream" variable. Compiler optimization removes unneeded code from xs_sendpages, as this function is now called with some constant arguments. We can now cleanly perform transport protocol-specific return code testing and error recovery in each path. Test-plan: Millions of fsx operations. Performance characterization such as "sio" or "iozone". Examine oprofile results for any changes before and after this patch is applied. Version: Thu, 11 Aug 2005 16:08:46 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: separate TCP and UDP transport connection logicChuck Lever
Create separate connection worker functions for managing UDP and TCP transport sockets. This eliminates several dependencies on "xprt->stream". Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with v2, v3, and v4. Version: Thu, 11 Aug 2005 16:08:18 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: separate TCP and UDP write space callbacksChuck Lever
Split the socket write space callback function into a TCP version and UDP version, eliminating one dependence on the "xprt->stream" variable. Keep the common pieces of this path in xprt.c so other transports can use it too. Test-plan: Write-intensive workload on a single mount point. Version: Thu, 11 Aug 2005 16:07:51 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: client-side transport switch cleanupChuck Lever
Clean-up: change some comments to reflect the realities of the new RPC transport switch mechanism. Get rid of unused xprt_receive() prototype. Also, organize function prototypes in xprt.h by usage and scope. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:07:21 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>