aboutsummaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2009-01-29cfg80211: print correct intersected regulatory domainLuis R. Rodriguez
When CONFIG_CFG80211_REG_DEBUG is enabled and an intersection occurs we are printing the regulatory domain passed by CRDA and indicating its the intersected regulatory domain. Lets fix this and print the intersection as originally intended. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29cfg80211: Fix sanity check on 5 GHz when processing country IELuis R. Rodriguez
This fixes two issues with the sanity check loop when processing the country IE: 1. Do not use frequency for the current subband channel check, this was a big fat typo. 2. Apply the 5 GHz 4-channel steps when considering max channel on each subband as was done with a recent patch. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16cfg80211: Fix parsed country IE info for 5 GHzLuis R. Rodriguez
The country IE number of channels on 5 GHz specifies the number of 5 GHz channels, not the number of sequential channel numbers. For example, if in a country IEs if the first channel given is 36 and the number of channels passed is 4 then the individual channel numbers defined for the 5 GHz PHY by these parameters are: 36, 40, 44, 48 not: 36, 37, 38, 39 See: http://tinyurl.com/11d-clarification Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16cfg80211: Fix regression with 11d on bandsLuis R. Rodriguez
This fixes a regression on disallowing bands introduced with the new 802.11d support. The issue is that IEEE-802.11 allows APs to send a subset of what a country regulatory domain defines. This was clarified in this document: http://tinyurl.com/11d-clarification As such it is possible, and this is what is done in practice, that a single band 2.4 GHz AP will only send 2.4 GHz band regulatory information through the 802.11 country information element and then the current intersection with what CRDA provided yields a regulatory domain with no 5 GHz information -- even though that country may actually allow 5 GHz operation. We correct this by only applying the intersection rules on a channel if the the intersection yields a regulatory rule on the same band the channel is on. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16cfg80211: make handle_band() and handle_channel() wiphy specificLuis R. Rodriguez
This allows us to make more wiphy specific judgements when handling the channels later on. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-06wireless: convert wireless ioctl to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-19mac80211: Fix HT channel selectionSujith
HT management is done differently for AP and STA modes, unify to just the ->config() callback since HT is fundamentally a PHY property and cannot be per-BSS. Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote the channel type ( NO_HT, HT20, HT40+, HT40- ). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19nl80211: Add signal strength and bandwith to nl80211station infoHenning Rogge
This patch adds signal strength and transmission bitrate to the station_info of nl80211. Signed-off-by: Henning Rogge <rogge@fgan.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12mac80211/cfg80211: check endianness in sparse runsJohannes Berg
Make sure sparse checks endianness when run on mac80211/cfg80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12cfg80211: fix nl80211 frequency handlingJohannes Berg
Fix two small bugs with HT frequency setting: * HT is accepted even when the driver is incapable * HT40 is accepted when the driver cannot do 40 MHz (both on the selected band) Also simplify the code a little. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-06wireless: Fix incorrect use of loose in wext.cNick Andrew
Fix incorrect use of loose in wext.c It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05cfg80211: "fix" 11d oopsJohannes Berg
This "fixes" the 11d oops I was seeing. This needs some more work but I cannot work on it now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: fix wiphy remove if no regulatory requestJohannes Berg
Fixes the segfault I just pointed out. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: handle SIOCGIWMODE/SIOCSIWMODEJohannes Berg
further reducing wext code in mac80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: handle SIOCGIWNAMEJohannes Berg
This patch moves the SIOCGIWNAME handling from mac80211 to cfg80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05nl80211: Add frequency configuration (including HT40)Jouni Malinen
This patch adds new NL80211_CMD_SET_WIPHY attributes NL80211_ATTR_WIPHY_FREQ and NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to allow userspace to set the operating channel (e.g., hostapd for AP mode). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26nl80211: Change max TX power to be in mBm instead of dBmJouni Malinen
In order to be consistent with NL80211_ATTR_POWER_RULE_MAX_EIRP, change NL80211_FREQUENCY_ATTR_MAX_TX_POWER to use mBm and U32 instead of dBm and U8. This is a userspace interface change, but the previous version had not yet been pushed upstream and there are no userspace programs using this yet, so there is justification to get this change in as long as it goes in before the previous version gets out. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26nl80211: Report max TX power in NL80211_BAND_ATTR_FREQSJouni Malinen
This is useful information to provide for userspace (e.g., hostapd needs this to generate Country IE). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211: add support for custom firmware regulatory solutionsLuis R. Rodriguez
This adds API to cfg80211 to allow wireless drivers to inform us if their firmware can handle regulatory considerations *and* they cannot map these regulatory domains to an ISO / IEC 3166 alpha2. In these cases we skip the first regulatory hint instead of expecting the driver to build their own regulatory structure, providing us with an alpha2, or using the reg_notifier(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211/mac80211: Add 802.11d supportLuis R. Rodriguez
This adds country IE parsing to mac80211 and enables its usage within the new regulatory infrastructure in cfg80211. We parse the country IEs only on management beacons for the BSSID you are associated to and disregard the IEs when the country and environment (indoor, outdoor, any) matches the already processed country IE. To avoid following misinformed or outdated APs we build and use a regulatory domain out of the intersection between what the AP provides us on the country IE and what CRDA is aware is allowed on the same country. A secondary device is allowed to follow only the same country IE as it make no sense for two devices on a system to be in two different countries. In the case the AP is using country IEs for an incorrect country the user may help compliance further by setting the regulatory domain before or after the IE is parsed and in that case another intersection will be performed. CONFIG_WIRELESS_OLD_REGULATORY is supported but requires CRDA present. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211: mark regdomains with > NL80211_MAX_SUPP_REG_RULES invalidLuis R. Rodriguez
Lets remain consistent and mark rds with > NL80211_MAX_SUPP_REG_RULES number of reg rules as invalid in is_valid_rd(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211: call_crda() won't tell us if CRDA was presentLuis R. Rodriguez
kobject_uevent_env() can return an error but it just tells us if the uvent was built/sent or not, it doesn't tell us anything about what happened in userspace, whether the udev rule was present nor does it tell us if CRDA was present or not. So remove the informative complaint about it assuming it will tell us such things. Note that you can determine if CRDA is present after loading cfg80211 by using: is_old_static_regdom(cfg80211_regdomain) but this doesn't account for possible user install after initial boot, and also for when the user uses the static EU regulatory domain. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211: expect different rd in cfg80211 when intersectingLuis R. Rodriguez
When intersecting it is possible that set_regdom() was called with a regulatory domain which we'll only use as an aid to build a final regulatory domain. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211: separate intersection section in __set_regdom()Luis R. Rodriguez
So far the __set_regdom() code is pretty generic as the intersection case is fairly straight forward; this will however change when 802.11d support is added so lets separate intersection code for now in preparation for 802.11d support. This patch only has slight functional changes. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211: remove switch from __set_regdom()Luis R. Rodriguez
We have control over the REGDOM_SET_BY_* macros passed so remove the switch. This patch has no functional changes. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211: remove switch from __regulatory_hint()Luis R. Rodriguez
We have complete control over REGDOM_SET_BY_* enum passed down to __regulatory_hint() as such there is no need to account for unexpected REGDOM_SET_BY_*'s, lets just remove the switch statement as this code does not change and won't change even when we add 802.11d support. This patch has no functional changes. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211: mark negative frequencies as invalidLuis R. Rodriguez
Regulatory rules with negative frequencies are now marked as invalid in is_valid_reg_rule(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21wireless: clean up sysfs code using %pMJohannes Berg
Remove converting the MAC address to a string by a direct byte conversion and use %pM instead, since the code is now boilerplate use a macro to define the show functions, and also use the shorter __ATTR_RO macro to define the attributes. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21lib80211: consolidate crypt init routinesJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21lib80211: absorb crypto bits from net/ieee80211John W. Linville
These bits are shared already between ipw2x00 and hostap, and could probably be shared both more cleanly and with other drivers. This commit simply relocates the code to lib80211 and adjusts the drivers appropriately. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10cfg80211: Add kdoc for struct regulatory_requestLuis R. Rodriguez
As regulatory_request gets bigger there will be more questions of what things means, so clarify documenation for it and keep track of the special alpha2 codes we use internally and on the userspace regulatory agents. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10cfg80211: Add regulatory domain intersection capabilityLuis R. Rodriguez
There are certain scenerios where we require intersecting two regulatory domains. This adds intersection support. When we enable 802.11d support we will use this to intersect the regulatory domain from the AP's country IE and what our regulatory agent believes is correct for a country. This patch enables intersection for now in the case where the last regdomain was set by a country IE which was parsed and the user then wants to set the regulatory domain. Since we don't support country IE parsing yet this code path will not be hit, however this allows us to pave the way for 11d support. Intersection code has been tested in userspace with CRDA. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10cfg80211: a reg rule is invalid if freq diff is 0Luis R. Rodriguez
A regulatory rule is invalid when the frequency difference between the end of the frequency range and the start is 0. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10nl80211: Add TX queue parameter configurationJouni Malinen
Add a new attribute, NL80211_ATTR_WIPHY_TXQ_PARAMS, that can be used with NL80211_CMD_SET_WIPHY for userspace (e.g., hostapd) to set TX queue parameters (txop, cwmin, cwmax, aifs). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10nl80211: Add basic rate configuration for AP modeJouni Malinen
Add a new attribute, NL80211_ATTR_BSS_BASIC_RATES, that can be used with NL80211_CMD_SET_BSS for userspace (e.g., hostapd) to set which rates are in the basic rate set. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10wireless: implement basic rate helper functionJohannes Berg
This adds a helper function that, given a bitmap of basic rates and a bitrate returns the response rate for this rate. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10wireless: fix a few sparse warningsJohannes Berg
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless regulatory: move ignore_requestJohannes Berg
This function is only used once, move it closer to its caller. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: clean up regulatory ignore_request functionJohannes Berg
This function has a few WARNs that may eventually trigger when an AP sends rogue beacons, those must be removed. Some of the comments in the function are also inappropriate as this function is concerned with the global hint, not a per- wiphy thing (which a multidomain flag on a wiphy would imply). I'm convinced that we don't need to do anything to implement multi-domain capability as 802.11-2007 specifies it because it makes only two things mandatory: * starting of BSS/IBSS must have country information (this can easily be done with a mac80211 patch) * a STA must adopt the country information (we already have the framework for this) But we don't have anything implemented anyway for now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove struct regdom hintingJohannes Berg
The code needs to be split out and cleaned up, so as a first step remove the capability, to add it back in a subsequent patch as a separate function. Also remove the publically facing return value of the function and the wiphy argument. A number of internal functions go from being generic helpers to just being used for alpha2 setting. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: make regdom passing semantics simplerJohannes Berg
The regdom struct is given to the core, so it might as well free it in error conditions. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove write-only 'granted' variableJohannes Berg
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: use individual buffers for printing ssid valuesJohn W. Linville
Also change escape_ssid to print_ssid to match print_mac semantics. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: escape_ssid should handle non-printablesJohn W. Linville
Also use common backslash sequences like \t, \n, \r, and \\ as well as \0. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove NETWORK_EMPTY_ESSID flagJohn W. Linville
It is unnecessary and of questionable value. Also remove is_empty_ssid, as it is also unnecessary. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: consolidate on a single escape_essid implementationJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: fix EU checkJohannes Berg
http://en.wikipedia.org/wiki/De_Morgan%27s_laws is useful. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: get rid of pointless request listJohannes Berg
We really only need to know the last request at each point in time. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove cfg80211_reg_mutexJohannes Berg
This mutex is wrong, we use cfg80211_drv_mutex (which should possibly be renamed to just cfg80211_mutex) everywhere except in one place, fix that and get rid of the extra mutex. Also get rid of a spurious regulatory_requests list definition. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 02:25:20 +0000