aboutsummaryrefslogtreecommitdiff
path: root/net/xfrm
AgeCommit message (Collapse)Author
2006-09-22[XFRM]: Fix wildcard as tunnel sourcePatrick McHardy
Hashing SAs by source address breaks templates with wildcards as tunnel source since the source address used for hashing/lookup is still 0/0. Move source address lookup to xfrm_tmpl_resolve_one() so we can use the real address in the lookup. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: remove xerr_idxp from __xfrm_policy_check()James Morris
It seems that during the MIPv6 respin, some code which was originally conditionally compiled around CONFIG_XFRM_ADVANCED was accidently left in after the config option was removed. This patch removes an extraneous pointer (xerr_idxp) which is no longer needed. Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Fix flusing with hash mask.Masahide NAKAMURA
This is a minor fix about transformation state flushing for net-2.6.19. Please apply it. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[NET]: Use SLAB_PANICAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Respect priority in policy lookups.David S. Miller
Even if we find an exact match in the hash table, we must inspect the inexact list to look for a match with a better priority. Noticed by Masahide NAKAMURA <nakam@linux-ipv6.org>. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Extract common hashing code into xfrm_hash.[ch]David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Hash policies when non-prefixed.David S. Miller
This idea is from Alexey Kuznetsov. It is common for policies to be non-prefixed. And for that case we can optimize lookups, insert, etc. quite a bit. For each direction, we have a dynamically sized policy hash table for non-prefixed policies. We also have a hash table on policy->index. For prefixed policies, we have a list per-direction which we will consult on lookups when a non-prefix hashtable lookup fails. This still isn't as efficient as I would like it. There are four immediate problems: 1) Lots of excessive refcounting, which can be fixed just like xfrm_state was 2) We do 2 hash probes on insert, one to look for dups and one to allocate a unique policy->index. Althought I wonder how much this matters since xfrm_state inserts do up to 3 hash probes and that seems to perform fine. 3) xfrm_policy_insert() is very complex because of the priority ordering and entry replacement logic. 4) Lots of counter bumping, in addition to policy refcounts, in the form of xfrm_policy_count[]. This is merely used to let code path(s) know that some IPSEC rules exist. So this count is indexed per-direction, maybe that is overkill. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Hash xfrm_state objects by source address too.David S. Miller
The source address is always non-prefixed so we should use it to help give entropy to the bydst hash. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Kill excessive refcounting of xfrm_state objects.David S. Miller
The refcounting done for timers and hash table insertions are just wasted cycles. We can eliminate all of this refcounting because: 1) The implicit refcount when the xfrm_state object is active will always be held while the object is in the hash tables. We never kfree() the xfrm_state until long after we've made sure that it has been unhashed. 2) Timers are even easier. Once we mark that x->km.state as anything other than XFRM_STATE_VALID (__xfrm_state_delete sets it to XFRM_STATE_DEAD), any timer that fires will do nothing and return without rearming the timer. Therefore we can defer the del_timer calls until when the object is about to be freed up during GC. We have to use del_timer_sync() and defer it to GC because we can't do a del_timer_sync() while holding x->lock which all callers of __xfrm_state_delete hold. This makes SA changes even more light-weight. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Purge dst references to deleted SAs passively.David S. Miller
Just let GC and other normal mechanisms take care of getting rid of DST cache references to deleted xfrm_state objects instead of walking all the policy bundles. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Do not flush all bundles on SA insert.David S. Miller
Instead, simply set all potentially aliasing existing xfrm_state objects to have the current generation counter value. This will make routes get relooked up the next time an existing route mentioning these aliased xfrm_state objects gets used, via xfrm_dst_check(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Simplify xfrm_spi_hashDavid S. Miller
It can use __xfrm{4,6}_addr_hash(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Put more keys into destination hash function.David S. Miller
Besides the daddr, key the hash on family and reqid too. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Add generation count to xfrm_state and xfrm_dst.David S. Miller
Each xfrm_state inserted gets a new generation counter value. When a bundle is created, the xfrm_dst objects get the current generation counter of the xfrm_state they will attach to at dst->xfrm. xfrm_bundle_ok() will return false if it sees an xfrm_dst with a generation count different from the generation count of the xfrm_state that dst points to. This provides a facility by which to passively and cheaply invalidate cached IPSEC routes during SA database changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Dynamic xfrm_state hash table sizing.David S. Miller
The grow algorithm is simple, we grow if: 1) we see a hash chain collision at insert, and 2) we haven't hit the hash size limit (currently 1*1024*1024 slots), and 3) the number of xfrm_state objects is > the current hash mask All of this needs some tweaking. Remove __initdata from "hashdist" so we can use it safely at run time. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Convert xfrm_state hash linkage to hlists.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Pull xfrm_state_by{spi,src} hash table knowledge out of afinfo.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Pull xfrm_state_bydst hash table knowledge out of afinfo.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] POLICY: Support netlink socket interface for sub policy.Masahide NAKAMURA
Sub policy can be used through netlink socket. PF_KEY uses main only and it is TODO to support sub. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Add sorting interface for state and template.Masahide NAKAMURA
Under two transformation policies it is required to merge them. This is a platform to sort state for outbound and templates for inbound respectively. It will be used when Mobile IPv6 and IPsec are used at the same time. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] POLICY: sub policy support.Masahide NAKAMURA
Sub policy is introduced. Main and sub policy are applied the same flow. (Policy that current kernel uses is named as main.) It is required another transformation policy management to keep IPsec and Mobile IPv6 lives separate. Policy which lives shorter time in kernel should be a sub i.e. normally main is for IPsec and sub is for Mobile IPv6. (Such usage as two IPsec policies on different database can be used, too.) Limitation or TODOs: - Sub policy is not supported for per socket one (it is always inserted as main). - Current kernel makes cached outbound with flowi to skip searching database. However this patch makes it disabled only when "two policies are used and the first matched one is bypass case" because neither flowi nor bundle information knows about transformation template size. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22[XFRM] POLICY: Add Kconfig to support sub policy.Masahide NAKAMURA
Add Kconfig to support sub policy. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Introduce XFRM_MSG_REPORT.Masahide NAKAMURA
XFRM_MSG_REPORT is a message as notification of state protocol and selector from kernel to user-space. Mobile IPv6 will use it when inbound reject is occurred at route optimization to make user-space know a binding error requirement. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Trace which secpath state is reject factor.Masahide NAKAMURA
For Mobile IPv6 usage, it is required to trace which secpath state is reject factor in order to notify it to user space (to know the address which cannot be used route optimized communication). Based on MIPL2 kernel patch. This patch was also written by: Henrik Petander <petander@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Add Mobile IPv6 route optimization protocols to netlink interface.Masahide NAKAMURA
Add Mobile IPv6 route optimization protocols to netlink interface. Route optimization states carry care-of address. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Fix message about transformation user interface.Masahide NAKAMURA
Transformation user interface is not only for IPsec. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] IPV6: Restrict bundle reusingMasahide NAKAMURA
For outbound transformation, bundle is checked whether it is suitable for current flow to be reused or not. In such IPv6 case as below, transformation may apply incorrect bundle for the flow instead of creating another bundle: - The policy selector has destination prefix length < 128 (Two or more addresses can be matched it) - Its bundle holds dst entry of default route whose prefix length < 128 (Previous traffic was used such route as next hop) - The policy and the bundle were used a transport mode state and this time flow address is not matched the bundled state. This issue is found by Mobile IPv6 usage to protect mobility signaling by IPsec, but it is not a Mobile IPv6 specific. This patch adds strict check to xfrm_bundle_ok() for each state mode and address when prefix length is less than 128. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] IPV6: Update outbound state timestamp for each sending.Masahide NAKAMURA
With this patch transformation state is updated last used time for each sending. Xtime is used for it like other state lifetime expiration. Mobile IPv6 enabled nodes will want to know traffic status of each binding (e.g. judgement to request binding refresh by correspondent node, or to keep home/care-of nonce alive by mobile node). The last used timestamp is an important hint about it. Based on MIPL2 kernel patch. This patch was also written by: Henrik Petander <petander@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Introduce care-of address.Noriaki TAKAMIYA
Care-of address is carried by state as a transformation option like IPsec encryption/authentication algorithm. Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22[XFRM]: Rename secpath_has_tunnel to secpath_has_nontransport.Masahide NAKAMURA
On current kernel inbound transformation state is allowed transport and disallowed tunnel mode when mismatch is occurred between tempates and states. As the result of adding two more modes by Mobile IPv6, this function name is misleading. Inbound transformation can allow only transport mode when mismatch is occurred between template and secpath. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Common receive function for route optimization extension headers.Masahide NAKAMURA
XFRM_STATE_WILDRECV flag is introduced; the last resort state is set it and receives packet which is not route optimized but uses such extension headers i.e. Mobile IPv6 signaling (binding update and acknowledgement). A node enabled Mobile IPv6 adds the state. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Restrict authentication algorithm only when inbound transformation ↵Masahide NAKAMURA
protocol is IPsec. For Mobile IPv6 usage, routing header or destination options header is used and it doesn't require this comparison. It is checked only for IPsec template. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Search by address using source address list.Masahide NAKAMURA
This is a support to search transformation states by its addresses by using source address list for Mobile IPv6 usage. To use it from user-space, it is also added a message type for source address as a xfrm state option. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Add source address list.Masahide NAKAMURA
Support source address based searching. Mobile IPv6 will use it. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Allow non IPsec protocol.Masahide NAKAMURA
It will be added two more transformation protocols (routing header and destination options header) for Mobile IPv6. xfrm_id_proto_match() can be handle zero as all, IPSEC_PROTO_ANY as all IPsec and otherwise as exact one. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Introduce a helper to compare id protocol.Masahide NAKAMURA
Put the helper to header for future use. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Add XFRM_MODE_xxx for future use.Masahide NAKAMURA
Transformation mode is used as either IPsec transport or tunnel. It is required to add two more items, route optimization and inbound trigger for Mobile IPv6. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[MLSXFRM]: Default labeling of socket specific IPSec policiesVenkat Yekkirala
This defaults the label of socket-specific IPSec policies to be the same as the socket they are set on. Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[MLSXFRM]: Add flow labelingVenkat Yekkirala
This labels the flows that could utilize IPSec xfrms at the points the flows are defined so that IPSec policy and SAs at the right label can be used. The following protos are currently not handled, but they should continue to be able to use single-labeled IPSec like they currently do. ipmr ip_gre ipip igmp sit sctp ip6_tunnel (IPv6 over IPv6 tunnel device) decnet Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[MLSXFRM]: Add security context to acquire messages using netlinkSerge Hallyn
This includes the security context of a security association created for use by IKE in the acquire messages sent to IKE daemons using netlink/xfrm_user. This would allow the daemons to include the security context in the negotiation, so that the resultant association is unique to that security context. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[MLSXFRM]: Flow based matching of xfrm policy and stateVenkat Yekkirala
This implements a seemless mechanism for xfrm policy selection and state matching based on the flow sid. This also includes the necessary SELinux enforcement pieces. Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-21[CRYPTO] users: Use crypto_comp and crypto_has_*Herbert Xu
This patch converts all users to use the new crypto_comp type and the crypto_has_* functions. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21[IPSEC]: Use HMAC template and hash interfaceHerbert Xu
This patch converts IPsec to use the new HMAC template. The names of existing simple digest algorithms may still be used to refer to their HMAC composites. The same structure can be used by other MACs such as AES-XCBC-MAC. This patch also switches from the digest interface to hash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-21[IPSEC] ESP: Use block ciphers where applicableHerbert Xu
This patch converts IPSec/ESP to use the new block cipher type where applicable. Similar to the HMAC conversion, existing algorithm names have been kept for compatibility. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21[IPSEC]: Add compatibility algorithm name supportHerbert Xu
This patch adds a compatibility name field for each IPsec algorithm. This is needed when parameterised algorithms are used. For example, "md5" will become "hmac(md5)", and "aes" will become "cbc(aes)". Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21[IPSEC]: Move linux/crypto.h inclusion out of net/xfrm.hHerbert Xu
The header file linux/crypto.h is only needed by a few files so including it in net/xfrm.h (which is included by half of the networking stack) is a waste. This patch moves it out of net/xfrm.h and into the specific header files that actually need it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-13[IPSEC]: Validate properly in xfrm_dst_check()David S. Miller
If dst->obsolete is -1, this is a signal from the bundle creator that we want the XFRM dst and the dsts that it references to be validated on every use. I misunderstood this intention when I changed xfrm_dst_check() to always return NULL. Now, when we purge a dst entry, by running dst_free() on it. This will set the dst->obsolete to a positive integer, and we want to return NULL in that case so that the socket does a relookup for the route. Thus, if dst->obsolete<0, let stale_bundle() validate the state, else always return NULL. In general, we need to do things more intelligently here because we flush too much state during rule changes. Herbert Xu has some ideas wherein the key manager gives us some help in this area. We can also use smarter state management algorithms inside of the kernel as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[NET]: Conversions from kmalloc+memset to k(z|c)alloc.Panagiotis Issaris
Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29[XFRM]: unexport xfrm_state_mtuAdrian Bunk
This patch removes the unused EXPORT_SYMBOL(xfrm_state_mtu). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>