aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2009-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: igb: fix link reporting when using sgmii igb: prevent skb_over panic w/ mtu smaller than 1K igb: Fix DCA errors and do not use context index for 82576 ipv6: compile fix for ip6mr.c packet: Avoid lock_sock in mmap handler sfc: Replace stats_enabled flag with a disable count sfc: SFX7101/SFT9001: Fix AN advertisements sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B sfc: Update board info for hardware monitor on SFN4111T-R5 and later sfc: Test for PHYXS faults whenever we cannot test link state bits sfc: Reinitialise the PHY completely in case of a PHY or NIC reset sfc: Fix post-reset MAC selection sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1 sfc: SFT9001: Fix speed reporting in 1G PHY loopback sfc: SFX7101: Remove workaround for bad link training sfc: SFT9001: Enable robust link training sky2: fix hard hang with netconsoling and iface going up
2009-01-31ipv6: compile fix for ip6mr.cDave Jones
net/ipv6/ip6mr.c: In function 'pim6_rcv': net/ipv6/ip6mr.c:368: error: implicit declaration of function 'csum_ipv6_magic' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30packet: Avoid lock_sock in mmap handlerHerbert Xu
As the mmap handler gets called under mmap_sem, and we may grab mmap_sem elsewhere under the socket lock to access user data, we should avoid grabbing the socket lock in the mmap handler. Since the only thing we care about in the mmap handler is for pg_vec* to be invariant, i.e., to exclude packet_set_ring, we can achieve this by simply using a new mutex. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Martin MOKREJŠ <mmokrejs@ribosome.natur.cuni.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) tulip: fix 21142 with 10Mbps without negotiation drivers/net/skfp: if !capable(CAP_NET_ADMIN): inverted logic gianfar: Fix Wake-on-LAN support smsc911x: timeout reaches -1 smsc9420: fix interrupt signalling test failures ucc_geth: Change uec phy id to the same format as gianfar's wimax: fix build issue when debugfs is disabled netxen: fix memory leak in drivers/net/netxen_nic_init.c tun: Add some missing TUN compat ioctl translations. ipv4: fix infinite retry loop in IP-Config net: update documentation ip aliases net: Fix OOPS in skb_seq_read(). net: Fix frag_list handling in skb_seq_read netxen: revert jumbo ringsize ath5k: fix locking in ath5k_config cfg80211: print correct intersected regulatory domain cfg80211: Fix sanity check on 5 GHz when processing country IE iwlwifi: fix kernel oops when ucode DMA memory allocation failure rtl8187: Fix error in setting OFDM power settings for RTL8187L mac80211: remove Michael Wu as maintainer ...
2009-01-29wimax: fix build issue when debugfs is disabledInaky Perez-Gonzalez
As reported by Toralf Förster and Randy Dunlap. - http://linuxwimax.org/pipermail/wimax/2009-January/000460.html - http://lkml.org/lkml/2009/1/29/279 The definitions needed for the wimax stack and i2400m driver debug infrastructure was, by mistake, compiled depending on CONFIG_DEBUG_FS (by them being placed in the debugfs.c files); thus the build broke in 2.6.29-rc3 when debugging was enabled (CONFIG_WIMAX_DEBUG) and DEBUG_FS was disabled. These definitions are always needed if debug is enabled at compile time (independently of DEBUG_FS being or not enabled), so moving them to a file that is always compiled fixes the issue. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29ipv4: fix infinite retry loop in IP-ConfigBenjamin Zores
Signed-off-by: Benjamin Zores <benjamin.zores@alcatel-lucent.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29net: Fix OOPS in skb_seq_read().Shyam Iyer
It oopsd for me in skb_seq_read. addr2line said it was linux-2.6/net/core/skbuff.c:2228, which is this line: while (st->frag_idx < skb_shinfo(st->cur_skb)->nr_frags) { I added some printks in there and it looks like we hit this: } else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; st->frag_idx = 0; goto next_skb; } Actually I did some testing and added a few printks and found that the st->cur_skb->data was 0 and hence the ptr used by iscsi_tcp was null. This caused the kernel panic. if (abs_offset < block_limit) { - *data = st->cur_skb->data + abs_offset; + *data = st->cur_skb->data + (abs_offset - st->stepped_offset); I enabled the debug_tcp and with a few printks found that the code did not go to the next_skb label and could find that the sequence being followed was this - It hit this if condition - if (st->cur_skb->next) { st->cur_skb = st->cur_skb->next; st->frag_idx = 0; goto next_skb; And so, now the st pointer is shifted to the next skb whereas actually it should have hit the second else if first since the data is in the frag_list. else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; goto next_skb; } Reversing the two conditions the attached patch fixes the issue for me on top of Herbert's patches. Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29net: Fix frag_list handling in skb_seq_readHerbert Xu
The frag_list handling was broken in skb_seq_read: 1) We didn't add the stepped offset when looking at the head are of fragments other than the first. 2) We didn't take the stepped offset away when setting the data pointer in the head area. 3) The frag index wasn't reset. This patch fixes both issues. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-01-29cfg80211: print correct intersected regulatory domainLuis R. Rodriguez
When CONFIG_CFG80211_REG_DEBUG is enabled and an intersection occurs we are printing the regulatory domain passed by CRDA and indicating its the intersected regulatory domain. Lets fix this and print the intersection as originally intended. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29cfg80211: Fix sanity check on 5 GHz when processing country IELuis R. Rodriguez
This fixes two issues with the sanity check loop when processing the country IE: 1. Do not use frequency for the current subband channel check, this was a big fat typo. 2. Apply the 5 GHz 4-channel steps when considering max channel on each subband as was done with a recent patch. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-27ipv6: Make mc_forwarding sysctl read-only.David S. Miller
The kernel manages this value internally, as necessary, as VIFs are added/removed and as multicast routers are registered and deregistered. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-27IPv6: Fix multicast routing bugs.Thomas Goff
This patch addresses the IPv6 multicast routing issues described below. It was tested with XORP 1.4/1.5 as the IPv6 PIM-SM routing daemon against FreeBSD peers. net/ipv6/ip6_input.c: - Don't try to forward link-local multicast packets. - Don't reset skb2->dev before calling ip6_mr_input() so packets can be identified as coming from the PIM register vif properly. net/ipv6/ip6mr.c: - Fix incoming PIM register messages processing: * The IPv6 pseudo-header should be included when checksumming PIM messages (RFC 4601 section 4.9; RFC 3973 section 4.7.1). * Packets decapsulated from PIM register messages should have skb->protocol ETH_P_IPV6. - Enable/disable IPv6 multicast forwarding on the corresponding interface when a routing daemon adds/removes a multicast virtual interface. - Remove incorrect skb_pull() to fix userspace signaling. - Enable/disable global IPv6 multicast forwarding when an IPv6 multicast routing socket is opened/closed. net/ipv6/route.c: - Don't use strict routing logic for packets decapsulated from PIM register messages (similar to disabling rp_filter for the IPv4 case). Signed-off-by: Thomas Goff <thomas.goff@boeing.com> Reviewed-by: Fred Templin <fred.l.templin@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-27net: fix xfrm reverse flow lookup for icmp6Jiri Pirko
This patch fixes the xfrm reverse flow lookup for icmp6 so that icmp6 packets don't get lost over ipsec tunnels. Similar patch is in RHEL5 kernel for a quite long time and I do not see why it isn't in mainline. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-27nfs: note that CONFIG_SUNRPC_XPRT_RDMA turns on server side support tooJ. Bruce Fields
We forgot to update this when adding server-side support. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-26tcp: Fix length tcp_splice_data_recv passes to skb_splice_bits.Dimitris Michailidis
tcp_splice_data_recv has two lengths to consider: the len parameter it gets from tcp_read_sock, which specifies the amount of data in the skb, and rd_desc->count, which is the amount of data the splice caller still wants. Currently it passes just the latter to skb_splice_bits, which then splices min(rd_desc->count, skb->len - offset) bytes. Most of the time this is fine, except when the skb contains urgent data. In that case len goes only up to the urgent byte and is less than skb->len - offset. By ignoring len tcp_splice_data_recv may a) splice data tcp_read_sock told it not to, b) return to tcp_read_sock a value > len. Now, tcp_read_sock doesn't handle used > len and leaves the socket in a bad state (both sk_receive_queue and copied_seq are bad at that point) resulting in duplicated data and corruption. Fix by passing min(rd_desc->count, len) to skb_splice_bits. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Acked-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26udp: optimize bind(0) if many ports are in useEric Dumazet
commit 9088c5609584684149f3fb5b065aa7f18dcb03ff (udp: Improve port randomization) introduced a regression for UDP bind() syscall to null port (getting a random port) in case lot of ports are already in use. This is because we do about 28000 scans of very long chains (220 sockets per chain), with many spin_lock_bh()/spin_unlock_bh() calls. Fix this using a bitmap (64 bytes for current value of UDP_HTABLE_SIZE) so that we scan chains at most once. Instead of 250 ms per bind() call, we get after patch a time of 2.9 ms Based on a report from Vitaly Mayatskikh Reported-by: Vitaly Mayatskikh <v.mayatskih@gmail.com> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Tested-by: Vitaly Mayatskikh <v.mayatskih@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (92 commits) gianfar: Revive VLAN support vlan: Export symbols as non GPL symbols. bnx2x: tx_has_work should not wait for FW netxen: reduce memory footprint netxen: fix vlan tso/checksum offload net: Fix linux/if_frad.h's suitability for userspace. net: Move config NET_NS to from net/Kconfig to init/Kconfig isdn: Fix missing ifdef in isdn_ppp networking: document "nc" in addition to "netcat" in netconsole.txt e1000e: workaround hw errata af_key: initialize xfrm encap_oa virtio_net: Fix MAX_PACKET_LEN to support 802.1Q VLANs lcs: fix compilation for !CONFIG_IP_MULTICAST rtl8187: Add termination packet to prevent stall iwlwifi: fix rs_get_rate WARN_ON() p54usb: fix packet loss with first generation devices sctp: Fix another socket race during accept/peeloff sctp: Properly timestamp outgoing data chunks for rtx purposes sctp: Correctly start rtx timer on new packet transmissions. sctp: Fix crc32c calculations on big-endian arhes. ...
2009-01-26vlan: Export symbols as non GPL symbols.Ben Greear
In previous kernels, any kernel module could get access to the 'real-device' and the VLAN-ID for a particular VLAN. In more recent kernels, the code was restructured such that this is hard to do without accessing private .h files for any module that cannot use GPL-only symbols. Attached is a patch to once again allow non-GPL modules the ability to access the real-device and VLAN id for VLANs. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26net: Move config NET_NS to from net/Kconfig to init/KconfigMatt Helsley
Make NET_NS available underneath the generic Namespaces config option since all of the other namespace options are there. Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-25af_key: initialize xfrm encap_oaTimo Teras
Currently encap_oa is left uninitialized, so it contains garbage data which is visible to userland via Netlink. Initialize it by zeroing it out. Signed-off-by: Timo Teras <timo.teras@iki.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22sctp: Fix another socket race during accept/peeloffVlad Yasevich
There is a race between sctp_rcv() and sctp_accept() where we have moved the association from the listening socket to the accepted socket, but sctp_rcv() processing cached the old socket and continues to use it. The easy solution is to check for the socket mismatch once we've grabed the socket lock. If we hit a mis-match, that means that were are currently holding the lock on the listening socket, but the association is refrencing a newly accepted socket. We need to drop the lock on the old socket and grab the lock on the new one. A more proper solution might be to create accepted sockets when the new association is established, similar to TCP. That would eliminate the race for 1-to-1 style sockets, but it would still existing for 1-to-many sockets where a user wished to peeloff an association. For now, we'll live with this easy solution as it addresses the problem. Reported-by: Michal Hocko <mhocko@suse.cz> Reported-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22sctp: Properly timestamp outgoing data chunks for rtx purposesVlad Yasevich
Recent changes to the retransmit code exposed a long standing bug where it was possible for a chunk to be time stamped after the retransmit timer was reset. This caused a rare situation where the retrnamist timer has expired, but nothing was marked for retrnasmission because all of timesamps on data were less then 1 rto ago. As result, the timer was never restarted since nothing was retransmitted, and this resulted in a hung association that did couldn't complete the data transfer. The solution is to timestamp the chunk when it's added to the packet for transmission purposes. After the packet is trsnmitted the rtx timer is restarted. This guarantees that when the timer expires, there will be data to retransmit. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22sctp: Correctly start rtx timer on new packet transmissions.Vlad Yasevich
Commit 62aeaff5ccd96462b7077046357a6d7886175a57 (sctp: Start T3-RTX timer when fast retransmitting lowest TSN) introduced a regression where it was possible to forcibly restart the sctp retransmit timer at the transmission of any new chunk. This resulted in much longer timeout times and sometimes hung sctp connections. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22mac80211: fix slot time debug messageChristian Lamparter
wlan0: switched to short barker preamble (BSSID=00:01:aa:bb:cc:dd) wlan0: switched to short slot (BSSID=) <something is missing here> should be: wlan0: switched to short barker preamble (BSSID=00:01:aa:bb:cc:dd) wlan0: switched to short slot (BSSID=00:01:aa:bb:cc:dd) Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22mac80211: decrement ref count to netdev after launching mesh discoveryBrian Cavagnolo
After launching mesh discovery in tx path, reference count was not being decremented. This was preventing module unload. Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22fs/Kconfig: move sunrpc outAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-21netfilter: ctnetlink: fix scheduling while atomicPatrick McHardy
Caused by call to request_module() while holding nf_conntrack_lock. Reported-and-tested-by: Kövesdi György <kgy@teledigit.hu> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20gro: Fix merging of paged packetsHerbert Xu
The previous fix to paged packets broke the merging because it reset the skb->len before we added it to the merged packet. This wasn't detected because it simply resulted in the truncation of the packet while the missing bit is subsequently retransmitted. The fix is to store skb->len before we clobber it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20gro: Fix error handling on extremely short fragsHerbert Xu
When a frag is shorter than an Ethernet header, we'd return a zeroed packet instead of aborting. This patch fixes that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20gro: Fix handling of complete checksums in IPv6Herbert Xu
We need to perform skb_postpull_rcsum after pulling the IPv6 header in order to maintain the correctness of the complete checksum. This patch also adds a missing iph reload after pulling. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20NET: net_namespace, fix lock imbalanceJiri Slaby
register_pernet_gen_subsys omits mutex_unlock in one fail path. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-01-20Revert "xfrm: For 32/64 compatability wrt. xfrm_usersa_info"David S. Miller
This reverts commit fc8c7dc1b29560c016a67a34ccff32a712b5aa86. As indicated by Jiri Klimes, this won't work. These numbers are not only used the size validation, they are also used to locate attributes sitting after the message. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19net: Fix data corruption when splicing from sockets.Jarek Poplawski
The trick in socket splicing where we try to convert the skb->data into a page based reference using virt_to_page() does not work so well. The idea is to pass the virt_to_page() reference via the pipe buffer, and refcount the buffer using a SKB reference. But if we are splicing from a socket to a socket (via sendpage) this doesn't work. The from side processing will grab the page (and SKB) references. The sendpage() calls will grab page references only, return, and then the from side processing completes and drops the SKB ref. The page based reference to skb->data is not enough to keep the kmalloc() buffer backing it from being reused. Yet, that is all that the socket send side has at this point. This leads to data corruption if the skb->data buffer is reused by SLAB before the send side socket actually gets the TX packet out to the device. The fix employed here is to simply allocate a page and copy the skb->data bytes into that page. This will hurt performance, but there is no clear way to fix this properly without a copy at the present time, and it is important to get rid of the data corruption. With fixes from Herbert Xu. Tested-by: Willy Tarreau <w@1wt.eu> Foreseen-by: Changli Gao <xiaosuo@gmail.com> Diagnosed-by: Willy Tarreau <w@1wt.eu> Reported-by: Willy Tarreau <w@1wt.eu> Fixed-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19net: Add debug info to track down GSO checksum bugHerbert Xu
I'm trying to track down why people're hitting the checksum warning in skb_gso_segment. As the problem seems to be hitting lots of people and I can't reproduce it or locate the bug, here is a patch to print out more details which hopefully should help us to track this down. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19net/9p: fid->fid is used uninitializedRoel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-16cfg80211: Fix parsed country IE info for 5 GHzLuis R. Rodriguez
The country IE number of channels on 5 GHz specifies the number of 5 GHz channels, not the number of sequential channel numbers. For example, if in a country IEs if the first channel given is 36 and the number of channels passed is 4 then the individual channel numbers defined for the 5 GHz PHY by these parameters are: 36, 40, 44, 48 not: 36, 37, 38, 39 See: http://tinyurl.com/11d-clarification Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16cfg80211: Fix regression with 11d on bandsLuis R. Rodriguez
This fixes a regression on disallowing bands introduced with the new 802.11d support. The issue is that IEEE-802.11 allows APs to send a subset of what a country regulatory domain defines. This was clarified in this document: http://tinyurl.com/11d-clarification As such it is possible, and this is what is done in practice, that a single band 2.4 GHz AP will only send 2.4 GHz band regulatory information through the 802.11 country information element and then the current intersection with what CRDA provided yields a regulatory domain with no 5 GHz information -- even though that country may actually allow 5 GHz operation. We correct this by only applying the intersection rules on a channel if the the intersection yields a regulatory rule on the same band the channel is on. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16cfg80211: make handle_band() and handle_channel() wiphy specificLuis R. Rodriguez
This allows us to make more wiphy specific judgements when handling the channels later on. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16mac80211: more kernel-doc fixesRandy Dunlap
Fix (delete) more mac80211 kernel-doc: Warning(linux-2.6.28-git13//include/net/mac80211.h:375): Excess struct/union/enum/typedef member 'retry_count' description in 'ieee80211_tx_info' Warning(linux-2.6.28-git13//net/mac80211/sta_info.h:308): Excess struct/union/enum/typedef member 'last_txrate' description in 'sta_info' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (95 commits) b44: GFP_DMA skb should not escape from driver korina: do not use IRQF_SHARED with IRQF_DISABLED korina: do not stop queue here korina: fix handling tx_chain_tail korina: do tx at the right position korina: do schedule napi after testing for it korina: rework korina_rx() for use with napi korina: disable napi on close and restart korina: reset resource buffer size to 1536 korina: fix usage of driver_data bnx2x: First slow path interrupt race bnx2x: MTU Filter bnx2x: Indirection table initialization index bnx2x: Missing brackets bnx2x: Fixing the doorbell size bnx2x: Endianness issues bnx2x: VLAN tagged packets without VLAN offload bnx2x: Protecting the link change indication bnx2x: Flow control updated before reporting the link bnx2x: Missing mask when calculating flow control ...
2009-01-159p: disallow RDMA if RDMA CM isn't availableRoland Dreier
If INET=y and INFINIBAND=y, but IPV6=m then INFINIBAND_ADDR_TRANS is set to n and the RDMA CM functions rdma_connect() et al are not built. However, the current config dependencies allow NET_9P_RDMA to be selected in this, which leads to a build failure. Fix this by adding a dependency on INFINIBAND_ADDR_TRANS to disallow NET_9P_RDMA in this case. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14can: fix slowpath issue in hrtimer callback functionOliver Hartkopp
Due to the loopback functionality in can_send() we can not invoke it from hardirq context which was done inside the bcm_tx_timeout_handler() hrtimer callback: [ 700.361154] [<c012228c>] warn_slowpath+0x80/0xb6 [ 700.361163] [<c013d559>] valid_state+0x125/0x136 [ 700.361171] [<c013d858>] mark_lock+0x18e/0x332 [ 700.361180] [<c013e300>] __lock_acquire+0x12e/0xb1e [ 700.361189] [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm] [ 700.361198] [<c031e20a>] dev_queue_xmit+0x191/0x479 [ 700.361206] [<c01262a7>] __local_bh_disable+0x2b/0x64 [ 700.361213] [<c031e20a>] dev_queue_xmit+0x191/0x479 [ 700.361225] [<f8aa69a1>] can_send+0xd7/0x11a [can] [ 700.361235] [<f8ab522b>] bcm_can_tx+0x9d/0xd9 [can_bcm] [ 700.361245] [<f8ab597f>] bcm_tx_timeout_handler+0x6a/0xbc [can_bcm] [ 700.361255] [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm] [ 700.361263] [<c0134143>] __run_hrtimer+0x5a/0x86 [ 700.361273] [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm] [ 700.361282] [<c0134a50>] hrtimer_interrupt+0xb9/0x110 This patch moves the rest of the functionality from the hrtimer callback to the already existing tasklet to fix this slowpath problem. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14net: Add init_dummy_netdev() and fix EMAC driver using itBenjamin Herrenschmidt
This adds an init_dummy_netdev() function that gets a network device structure (allocation and lifetime entirely under caller's control) and initialize the minimum amount of fields so it can be used to schedule NAPI polls without registering a full blown interface. This is to be used by drivers that need to tie several hardware interfaces to a single NAPI poll scheduler due to HW limitations. It also updates the ibm_newemac driver to use that, this fixing the oops on 2.6.29 due to passing NULL as "dev" to netif_napi_add() Symbol is exported GPL only a I don't think we want binary drivers doing that sort of acrobatics (if we want them at all). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gso: Ensure that the packet is long enoughHerbert Xu
When we get a GSO packet from an untrusted source, we need to ensure that it is sufficiently long so that we don't end up crashing. Based on discovery and patch by Ian Campbell. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gro: Fix page ref count for skbs freed normallyHerbert Xu
When an skb with page frags is merged into an existing one, we cannibalise its reference count. This is OK when the skb is reused because we set nr_frags to zero in that case. However, for the case where the skb is freed through kfree_skb, we didn't clear nr_frags which causes the page to be freed prematurely. This is fixed by moving the skb resetting into skb_gro_receive. Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14xfrm: For 32/64 compatability wrt. xfrm_usersa_infoDavid S. Miller
Reported by Jiri Klimes. Fix suggested by Patrick McHardy. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gro: Check for GSO packets and packets with frag_listHerbert Xu
As GRO cannot be applied to packets with frag_list we need to make sure that we reject such packets if they are fed to us, e.g., through a tunnel device. Also there is no point in applying GRO on GSO packets so they too should be rejected. This allows GRO to be used in virtio-net which may produce GSO packets directly but may still benefit from GRO if the other end of it doesn't support GSO. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14[CVE-2009-0029] System call wrappers part 22Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>