aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2008-01-28[IPSEC]: Add ICMP host relookup supportHerbert Xu
RFC 4301 requires us to relookup ICMP traffic that does not match any policies using the reverse of its payload. This patch implements this for ICMP traffic that originates from or terminates on localhost. This is activated on outbound with the new policy flag XFRM_POLICY_ICMP, and on inbound by the new state flag XFRM_STATE_ICMP. On inbound the policy check is now performed by the ICMP protocol so that it can repeat the policy check where necessary. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Added xfrm_decode_session_reverse and xfrmX_policy_check_reverseHerbert Xu
RFC 4301 requires us to relookup ICMP traffic that does not match any policies using the reverse of its payload. This patch adds the functions xfrm_decode_session_reverse and xfrmX_policy_check_reverse so we can get the reverse flow to perform such a lookup. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Make xfrm_lookup flags argument a bit-fieldHerbert Xu
This patch introduces an enum for bits in the flags argument of xfrm_lookup. This is so that we can cram more information into it later. Since all current users use just the values 0 and 1, XFRM_LOOKUP_WAIT has been added with the value 1 << 0 to represent the current meaning of flags. The test in __xfrm_lookup has been changed accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TFRC]: Remove previous loss intervals implementationGerrit Renker
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CCID3]: Interface CCID3 code with newer Loss Intervals DatabaseGerrit Renker
This hooks up the TFRC Loss Interval database with CCID 3 packet reception. In addition, it makes the CCID-specific computation of the first loss interval (which requires access to all the guts of CCID3) local to ccid3.c. The patch also fixes an omission in the DCCP code, that of a default / fallback RTT value (defined in section 3.4 of RFC 4340 as 0.2 sec); while at it, the upper bound of 4 seconds for an RTT sample has been reduced to match the initial TCP RTO value of 3 seconds from[RFC 1122, 4.2.3.1]. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TFRC]: CCID3 (and CCID4) needs to access these inlinesGerrit Renker
This moves two inlines back to packet_history.h: these are not private to packet_history.c, but are needed by CCID3/4 to detect whether a new loss is indicated, or whether a loss is already pending. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CCID3]: Redundant debugging output / documentationGerrit Renker
Each time feedback is sent two lines are printed: ccid3_hc_rx_send_feedback: client ... - entry ccid3_hc_rx_send_feedback: Interval ...usec, X_recv=..., 1/p=... The first line is redundant and thus removed. Further, documentation of ccid3_hc_rx_sock (capitalisation) is made consistent. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TFRC]: Ringbuffer to track loss interval historyGerrit Renker
A ringbuffer-based implementation of loss interval history is easier to maintain, allocate, and update. The `swap' routine to keep the RX history sorted is due to and was written by Arnaldo Carvalho de Melo, simplifying an earlier macro-based variant. Details: * access to the Loss Interval Records via macro wrappers (with safety checks); * simplified, on-demand allocation of entries (no extra memory consumption on lossless links); cache allocation is local to the module / exported as service; * provision of RFC-compliant algorithm to re-compute average loss interval; * provision of comprehensive, new loss detection algorithm - support for all cases of loss, including re-ordered/duplicate packets; - waiting for NDUPACK=3 packets to fill the hole; - updating loss records when a late-arriving packet fills a hole. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TFRC]: Loss interval code needs the macros/inlines that were movedGerrit Renker
This moves the inlines (which were previously declared as macros) back into packet_history.h since the loss detection code needs to be able to read entries from the RX history in order to create the relevant loss entries: it needs at least tfrc_rx_hist_loss_prev() and tfrc_rx_hist_last_rcv(), which in turn require the definition of the other inlines (macros). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TFRC]: Put RX/TX initialisation into tfrc.cGerrit Renker
This separates RX/TX initialisation and puts all packet history / loss intervals initialisation into tfrc.c. The organisation is uniform: slab declaration -> {rx,tx}_init() -> {rx,tx}_exit() Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: separate af_packet netns dataDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: struct net content re-work (v3)Denis V. Lunev
Recently David Miller and Herbert Xu pointed out that struct net becomes overbloated and un-maintainable. There are two solutions: - provide a pointer to a network subsystem definition from struct net. This costs an additional dereferrence - place sub-system definition into the structure itself. This will speedup run-time access at the cost of recompilation time The second approach looks better for us. Other sub-systems will follow. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: make the protocol initialization to return an error codeDaniel Lezcano
This patchset makes the different protocols to return an error code, so the af_inet6 module can check the initialization was correct or not. The raw6 was taken into account to be consistent with the rest of the protocols, but the registration is at the same place. Because the raw6 has its own init function, the proto and the ops structure can be moved inside the raw6.c file. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: make inet6_register_protosw to return an error codeDaniel Lezcano
This patch makes the inet6_register_protosw to return an error code. The different protocols can be aware the registration was successful or not and can pass the error to the initial caller, af_inet6. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: make frag to return an error at initializationDaniel Lezcano
This patch makes the frag_init to return an error code, so the af_inet6 module can handle the error. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: make extended headers to return an error at initializationDaniel Lezcano
This patch factorize the code for the differents init functions for rthdr, nodata, destopt in a single function exthdrs_init. This function returns an error so the af_inet6 module can check correctly the initialization. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: make flowlabel to return an errorDaniel Lezcano
This patch makes the flowlab subsystem to return an error code and makes some cleanup with procfs ifdefs. The af_inet6 will use the flowlabel init return code to check the initialization was correct. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Cleanup sysctl manipulations in devinet.cPavel Emelyanov
This includes: * moving neigh_sysctl_(un)register calls inside devinet_sysctl_(un)register ones, as they are always called in pairs; * making __devinet_sysctl_unregister() to unregister the ipv4_devconf struct, while original devinet_sysctl_unregister() works with the in_device to handle both - devconf and neigh sysctls; * make stubs for CONFIG_SYSCTL=n case to get rid of in-code ifdefs. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[INET]: Use BUILD_BUG_ON in inet_timewait_sock.c checksPavel Emelyanov
Make the INET_TWDR_TWKILL_SLOTS vs sizeof(twdr->thread_slots) check nicer. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TCP]: Use BUILD_BUG_ON for tcp_skb_cb size checkingPavel Emelyanov
The sizeof(struct tcp_skb_cb) should not be less than the sizeof(skb->cb). This is checked in net/ipv4/tcp.c, but this check can be made more gracefully. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETLINK]: kzalloc() conversionEric Dumazet
nl_pid_hash_alloc() is renamed to nl_pid_hash_zalloc(). It is now returning zeroed memory to its callers. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: dst_ifdown() cleanupEric Dumazet
This cleanup shrinks size of net/core/dst.o on i386 from 1299 to 1289 bytes. (This is because dev_hold()/dev_put() are doing atomic_inc()/atomic_dec() and force compiler to re-evaluate memory contents.) Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Add xfrm_input_state helperHerbert Xu
This patch adds the xfrm_input_state helper function which returns the current xfrm state being processed on the input path given an sk_buff. This is currently only used by xfrm_input but will be used by ESP upon asynchronous resumption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CCID3]: HC-receiver should not insert timestamps as HC-sender doesn't uses itGerrit Renker
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TFRC]: The function tfrc_rx_hist_entry_delete() is not used anymoreGerrit Renker
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TFRC]: Move comment.Gerrit Renker
Moved up the comment "Receiver routines" above the first occurrence of RX history routines. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: Remove unused "mibalign" argument for snmp_mib_init().YOSHIFUJI Hideaki
With fixes from Arnaldo Carvalho de Melo. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: last default route is a fib table propertyDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Unify assignment of fi to fib_resultDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: no need pass pointer to a default into fib_detect_deathDenis V. Lunev
ipv4: no need pass pointer to a default into fib_detect_death Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: route6 remove ifdef for fib_rulesDaniel Lezcano
The patch defines the usual static inline functions when the code is disabled for fib6_rules. That's allow to remove some ifdef in route.c file and make the code a little more clear. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: remove ifdef in route6 for xfrm6Daniel Lezcano
The following patch create the usual static inline functions to disable the xfrm6_init and xfrm6_fini function when XFRM is off. That's allow to remove some ifdef and make the code a little more clear. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: create route6 proc init-fini functionsDaniel Lezcano
Make the proc creation/destruction to be a separate function. That allows to remove the #ifdef CONFIG_PROC_FS in the init/fini function and make them more readable. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET] sysctl: make sysctl_somaxconn per-namespacePavel Emelyanov
Just move the variable on the struct net and adjust its usage. Others sysctls from sys.net.core table are more difficult to virtualize (i.e. make them per-namespace), but I'll look at them as well a bit later. Signed-off-by: Pavel Emelyanov <xemul@oenvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET] sysctl: prepare core tables to point to netns variablesPavel Emelyanov
Some of ctl variables are going to be on the struct net. Here's the way to adjust the ->data pointer on the ctl_table-s to point on the right variable. Since some pointers still point on the global variables, I keep turning the write bits off on such tables. This looks to become a common procedure for net sysctls, so later parts of this code may migrate to some more generic place. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET] sysctl: make the sys.net.core sysctls per-namespacePavel Emelyanov
Making them per-namespace is required for the following two reasons: First, some ctl values have a per-namespace meaning. Second, making them writable from the sub-namespace is an isolation hole. So I introduce the pernet operations to create these tables. For init_net I use the existing statically declared tables, for sub-namespace they are duplicated and the write bits are removed from the mode. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IUCV]: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
these three list_head are all local variables, but can also use LIST_HEAD. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[XFRM] net/xfrm/xfrm_state.c: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[X25]: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[LAPB] net/lapb/lapb_iface.c: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4] net/ipv4/cipso_ipv4.c: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET] net/core/dev.c: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Move trie_local and trie_main into the proc iterator.Eric W. Biederman
We only use these variables when displaying the trie in proc so place them into the iterator to make this explicit. We should probably do something smarter to handle the CONFIG_IP_MULTIPLE_TABLES case but at least this makes it clear that the silliness is limited to the display in /proc. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Remove ip_fib_local_table and ip_fib_main_table defines.Eric W. Biederman
There are only 2 users and it doesn't hurt to call fib_get_table instead, and it makes it easier to make the fib network namespace aware. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6] route6/fib6: Don't panic a kmem_cache_create.Daniel Lezcano
If the kmem_cache_creation fails, the kernel will panic. It is acceptable if the system is booting, but if the ipv6 protocol is compiled as a module and it is loaded after the system has booted, do we want to panic instead of just failing to initialize the protocol ? The init function is now returning an error and this one is checked for protocol initialization. So the ipv6 protocol will safely fails. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: Make af_inet6 to check ip6_route_init return value.Daniel Lezcano
The af_inet6 initialization function does not check the return code of the route initilization, so if something goes wrong, the protocol initialization will continue anyway. This patch takes into account the modification made in the different route's initialization subroutines to check the return value and to make the protocol initialization to fail. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: Make ip6_route_init to return an error code.Daniel Lezcano
The route initialization function does not return any value to notify if the initialization is successful or not. This patch checks all calls made for the initilization in order to return a value for the caller. Unfortunately, proc_net_fops_create will return a NULL pointer if CONFIG_PROC_FS is off, so we can not check the return code without an ifdef CONFIG_PROC_FS block in the ip6_route_init function. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: Make fib6_rules_init to return an error code.Daniel Lezcano
When the fib_rules initialization finished, no return code is provided so there is no way to know, for the caller, if the initialization has been successful or has failed. This patch fix that. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: Make xfrm6_init to return an error code.Daniel Lezcano
The xfrm initialization function does not return any error code, so if there is an error, the caller can not be advise of that. This patch checks the return code of the different called functions in order to return a successful or failed initialization. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: Make fib6_init to return an error code.Daniel Lezcano
If there is an error in the initialization function, nothing is followed up to the caller. So I add a return value to be set for the init function. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>