aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2008-08-18[Bluetooth] Consolidate maintainers informationMarcel Holtmann
The Bluetooth entries for the MAINTAINERS file are a little bit too much. Consolidate them into two entries. One for Bluetooth drivers and another one for the Bluetooth subsystem. Also the MODULE_AUTHOR should indicate the current maintainer of the module and actually not the original author. Fix all Bluetooth modules to provide current maintainer information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-18[Bluetooth] Fix userspace breakage due missing class linksMarcel Holtmann
The Bluetooth adapters and connections are best presented via a class in sysfs. The removal of the links inside the Bluetooth class broke assumptions by userspace programs on how to find attached adapters. This patch creates adapters and connections as part of the Bluetooth class, but it uses different device types to distinguish them. The userspace programs can now easily navigate in the sysfs device tree. The unused platform device and bus have been removed to keep the code simple and clean. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-07pkt_sched: Fix actions referencingJamal Hadi Salim
When an action is added several times with the same exact index it gets deleted on every even-numbered attempt. This fixes that issue. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6
2008-08-07tcp: (whitespace only) fix confusing indentationAdam Langley
The indentation in part of tcp_minisocks makes it look like one of the if statements is much more important than it actually is. Signed-off-by: Adam Langley <agl@imperialviolet.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07pkt_sched: Fix qdisc config when link is down.David S. Miller
Bug reported by Stephen Hemminger. We need to fetch the root from ->qdisc_sleeping not ->qdisc. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07[Bluetooth] Add parameters to control BNEP header compressionMarcel Holtmann
The Bluetooth qualification for PAN demands testing with BNEP header compression disabled. This is actually pretty stupid and the Linux implementation outsmarts the test system since it compresses whenever possible. So to pass qualification two need parameters have been added to control the compression of source and destination headers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-07mac80211: keep mesh ifaces in allmulti modeLuis Carlos Cobo
Currently a mesh node will not forward a multicast frame if it is not subscribed to the specific multicast address. This patch addresses the issue and fixes mesh multicast forwarding. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07mac80211: fix use of skb->cb for mesh forwardingLuis Carlos Cobo
Now we deal with mesh forwarding before the 802.11->802.3 conversion, thus eliminating a few unnecessary steps. The next hop lookup is called from ieee80211_master_start_xmit() instead of subif_start_xmit(). Until the next hop is found, RA in the frame will be all zeroes for frames originating from the device. For forwarded frames, RA will contain the TA of the received frame, which will be necessary to send a path error if a next hop is not found. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07pktgen: multiqueue etc.Robert Olsson
Sofar far pktgen have had a restriction to only use one device per kernel thread. With the new multiqueue architecture this is no longer adequate. The patch below is an effort to remove this by in pktgen configuration adding a tag to the device name a la eth0@0 etc. The tag is used for usual device config just as before. Also a new flag is introduced to mirror queue_map with sending threads smp_processor_id() QUEUE_MAP_CPU. An example: We use 4 CPU's to send to one 10g interface (eth0) and we use the new tagging to send a mix of packet sizes, 64, 576 and 1500 bytes. Also we use TX queues according to smp_processor_id() PGDEV=/proc/net/pktgen/kpktgend_0 pgset "add_device eth0@0" PGDEV=/proc/net/pktgen/kpktgend_1 pgset "add_device eth0@1" PGDEV=/proc/net/pktgen/kpktgend_2 pgset "add_device eth0@2" PGDEV=/proc/net/pktgen/kpktgend_3 pgset "add_device eth0@3" .... PGDEV=/proc/net/pktgen/eth0@0 pgset "pkt_size 64" pgset "flag QUEUE_MAP_CPU" PGDEV=/proc/net/pktgen/eth0@1 pgset "pkt_size 572" pgset "flag QUEUE_MAP_CPU" PGDEV=/proc/net/pktgen/eth0@2 pgset "pkt_size 1496" PGDEV=/proc/net/pktgen/eth0@3 pgset "pkt_size 1496" pgset "flag QUEUE_MAP_CPU" Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-08-07Merge branch 'for-jeff' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into tmp
2008-08-07net/core: Allow receive on active slaves.Joe Eykholt
If a packet_type specifies an active slave to bonding and not just any interface, allow it to receive frames that came in on that interface. Signed-off-by: Joe Eykholt <jre@nuovasystems.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07net/core: Allow certain receives on inactive slave.Joe Eykholt
Allow a packet_type that specifies the exact device to receive even on an inactive bonding slave devices. This is important for some L2 protocols such as LLDP and FCoE. This can eventually be used for the bonding special cases as well. Signed-off-by: Joe Eykholt <jre@nuovasystems.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07net/core: Uninline skb_bond().Joe Eykholt
Otherwise subsequent changes need multiple return values. Signed-off-by: Joe Eykholt <jre@nuovasystems.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-06tcp: Fix kernel panic when calling tcp_v(4/6)_md5_do_lookupGui Jianfeng
If the following packet flow happen, kernel will panic. MathineA MathineB SYN ----------------------> SYN+ACK <---------------------- ACK(bad seq) ----------------------> When a bad seq ACK is received, tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr)) is finally called by tcp_v4_reqsk_send_ack(), but the first parameter(skb->sk) is NULL at that moment, so kernel panic happens. This patch fixes this bug. OOPS output is as following: [ 302.812793] IP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 [ 302.817075] Oops: 0000 [#1] SMP [ 302.819815] Modules linked in: ipv6 loop dm_multipath rtc_cmos rtc_core rtc_lib pcspkr pcnet32 mii i2c_piix4 parport_pc i2c_core parport ac button ata_piix libata dm_mod mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 302.849946] [ 302.851198] Pid: 0, comm: swapper Not tainted (2.6.27-rc1-guijf #5) [ 302.855184] EIP: 0060:[<c05cfaa6>] EFLAGS: 00010296 CPU: 0 [ 302.858296] EIP is at tcp_v4_md5_do_lookup+0x12/0x42 [ 302.861027] EAX: 0000001e EBX: 00000000 ECX: 00000046 EDX: 00000046 [ 302.864867] ESI: ceb69e00 EDI: 1467a8c0 EBP: cf75f180 ESP: c0792e54 [ 302.868333] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 302.871287] Process swapper (pid: 0, ti=c0792000 task=c0712340 task.ti=c0746000) [ 302.875592] Stack: c06f413a 00000000 cf75f180 ceb69e00 00000000 c05d0d86 000016d0 ceac5400 [ 302.883275] c05d28f8 000016d0 ceb69e00 ceb69e20 681bf6e3 00001000 00000000 0a67a8c0 [ 302.890971] ceac5400 c04250a3 c06f413a c0792eb0 c0792edc cf59a620 cf59a620 cf59a634 [ 302.900140] Call Trace: [ 302.902392] [<c05d0d86>] tcp_v4_reqsk_send_ack+0x17/0x35 [ 302.907060] [<c05d28f8>] tcp_check_req+0x156/0x372 [ 302.910082] [<c04250a3>] printk+0x14/0x18 [ 302.912868] [<c05d0aa1>] tcp_v4_do_rcv+0x1d3/0x2bf [ 302.917423] [<c05d26be>] tcp_v4_rcv+0x563/0x5b9 [ 302.920453] [<c05bb20f>] ip_local_deliver_finish+0xe8/0x183 [ 302.923865] [<c05bb10a>] ip_rcv_finish+0x286/0x2a3 [ 302.928569] [<c059e438>] dev_alloc_skb+0x11/0x25 [ 302.931563] [<c05a211f>] netif_receive_skb+0x2d6/0x33a [ 302.934914] [<d0917941>] pcnet32_poll+0x333/0x680 [pcnet32] [ 302.938735] [<c05a3b48>] net_rx_action+0x5c/0xfe [ 302.941792] [<c042856b>] __do_softirq+0x5d/0xc1 [ 302.944788] [<c042850e>] __do_softirq+0x0/0xc1 [ 302.948999] [<c040564b>] do_softirq+0x55/0x88 [ 302.951870] [<c04501b1>] handle_fasteoi_irq+0x0/0xa4 [ 302.954986] [<c04284da>] irq_exit+0x35/0x69 [ 302.959081] [<c0405717>] do_IRQ+0x99/0xae [ 302.961896] [<c040422b>] common_interrupt+0x23/0x28 [ 302.966279] [<c040819d>] default_idle+0x2a/0x3d [ 302.969212] [<c0402552>] cpu_idle+0xb2/0xd2 [ 302.972169] ======================= [ 302.974274] Code: fc ff 84 d2 0f 84 df fd ff ff e9 34 fe ff ff 83 c4 0c 5b 5e 5f 5d c3 90 90 57 89 d7 56 53 89 c3 50 68 3a 41 6f c0 e8 e9 55 e5 ff <8b> 93 9c 04 00 00 58 85 d2 59 74 1e 8b 72 10 31 db 31 c9 85 f6 [ 303.011610] EIP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 SS:ESP 0068:c0792e54 [ 303.018360] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06pkt_sched: Fix "parent is root" test in qdisc_create().David S. Miller
As noticed by Stephen Hemminger, the root qdisc is denoted by TC_H_ROOT, not zero. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06ipv4: Fix over-ifdeffing of ip_static_sysctl_init.David S. Miller
Noticed by Paulius Zaleckas. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06ipsec: Interfamily IPSec BEET, ipv4-inner ipv6-outerJoakim Koskela
Here's a revised version, based on Herbert's comments, of a fix for the ipv4-inner, ipv6-outer interfamily ipsec beet mode. It fixes the network header adjustment during interfamily, as well as makes sure that we reserve enough room for the new ipv6 header if we might have something else as the inner family. Also, the ipv4 pseudo header construction was added. Signed-off-by: Joakim Koskela <jookos@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06ipsec: Interfamily IPSec BEETJoakim Koskela
Here's a revised version, based on Herbert's comments, of a fix for the ipv6-inner, ipv4-outer interfamily ipsec beet mode. It fixes the network header adjustment in interfamily, and doesn't reserve space for the pseudo header anymore when we have ipv6 as the inner family. Signed-off-by: Joakim Koskela <jookos@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06netfilter: fix two recent sysctl problemsKrzysztof Piotr Oledzki
Starting with 9043476f726802f4b00c96d0c4f418dde48d1304 ("[PATCH] sanitize proc_sysctl") we have two netfilter releated problems: - WARNING: at kernel/sysctl.c:1966 unregister_sysctl_table+0xcc/0x103(), caused by wrong order of ini/fini calls - net.netfilter is duplicated and has truncated set of records Thanks to very useful guidelines from Al Viro, this patch fixes both of them. Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06ipv6: replace dst_metric() with dst_mtu() in net/ipv6/route.c.Rami Rosen
This patch replaces dst_metric() with dst_mtu() in net/ipv6/route.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06ipv4: replace dst_metric() with dst_mtu() in net/ipv4/route.c.Rami Rosen
This patch replaces dst_metric() with dst_mtu() in net/ipv4/route.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-05AX.25: Fix sysctl registration if !CONFIG_AX25_DAMA_SLAVERalf Baechle
Since 49ffcf8f99e8d33ec8afb450956804af518fd788 ("sysctl: update sysctl_check_table") setting struct ctl_table.procname = NULL does no longer work as it used to the way the AX.25 code is expecting it to resulting in the AX.25 sysctl registration code to break if CONFIG_AX25_DAMA_SLAVE was not set as in some distribution kernels. Kernel releases from 2.6.24 are affected. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-05pktgen: mac countRobert Olsson
dst_mac_count and src_mac_count patch from Eneas Hunguana We have sent one mac address to much. Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-05pktgen: random flow Robert Olsson
Random flow generation has not worked. This fixes it. Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-05bridge: Eliminate unnecessary forward delayStephen Hemminger
From: Stephen Hemminger <shemminger@vyatta.com> Based upon original patch by Herbert Xu, which contained the following problem description: -------------------- When the forward delay is set to zero, we still delay the setting of the forwarding state by one or possibly two timers depending on whether STP is enabled. This could either turn out to be instantaneous, or horribly slow depending on the load of the machine. As there is nothing preventing us from enabling forwarding straight away, this patch eliminates this potential delay by executing the code directly if the forward delay is zero. The effect of this problem is that immediately after the carrier comes on a port, the bridge will drop all packets received from that port until it enters forwarding mode, thus causing unnecessary packet loss. Note that this patch doesn't fully remove the delay due to the link watcher. We should also check the carrier state when we are about to drop an incoming packet because the port is disabled. But that's for another patch. -------------------- This version of the fix takes a different approach, in that it just does the state change directly. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-05Merge branch 'no-ath9k' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-08-05bridge: fix compile warning in net/bridge/br_netfilter.cRami Rosen
This patch fixes the following warning due to incompatible pointer assignment: net/bridge/br_netfilter.c: In function 'br_netfilter_rtable_init': net/bridge/br_netfilter.c:116: warning: assignment from incompatible pointer type This warning is due to commit 4adf0af6818f3ea52421dc0bae836cfaf20ef72a from July 30 (send correct MTU value in PMTU (revised)). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-04net_sched: Add qdisc __NET_XMIT_BYPASS flagJarek Poplawski
Patrick McHardy <kaber@trash.net> noticed that it would be nice to handle NET_XMIT_BYPASS by NET_XMIT_SUCCESS with an internal qdisc flag __NET_XMIT_BYPASS and to remove the mapping from dev_queue_xmit(). David Miller <davem@davemloft.net> spotted a serious bug in the first version of this patch. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-04net_sched: Add qdisc __NET_XMIT_STOLEN flagJarek Poplawski
Patrick McHardy <kaber@trash.net> noticed: "The other problem that affects all qdiscs supporting actions is TC_ACT_QUEUED/TC_ACT_STOLEN getting mapped to NET_XMIT_SUCCESS even though the packet is not queued, corrupting upper qdiscs' qlen counters." and later explained: "The reason why it translates it at all seems to be to not increase the drops counter. Within a single qdisc this could be avoided by other means easily, upper qdiscs would still increase the counter when we return anything besides NET_XMIT_SUCCESS though. This means we need a new NET_XMIT return value to indicate this to the upper qdiscs. So I'd suggest to introduce NET_XMIT_STOLEN, return that to upper qdiscs and translate it to NET_XMIT_SUCCESS in dev_queue_xmit, similar to NET_XMIT_BYPASS." David Miller <davem@davemloft.net> noticed: "Maybe these NET_XMIT_* values being passed around should be a set of bits. They could be composed of base meanings, combined with specific attributes. So you could say "NET_XMIT_DROP | __NET_XMIT_NO_DROP_COUNT" The attributes get masked out by the top-level ->enqueue() caller, such that the base meanings are the only thing that make their way up into the stack. If it's only about communication within the qdisc tree, let's simply code it that way." This patch is trying to realize these ideas. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-04iwlwifi: HW bug fixesTomas Winkler
This patch adds few HW bug fixes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04mac80211: automatic IBSS channel selectionDaniel Drake
When joining an ad-hoc network, the user is currently required to specify the channel. The network will not be joined otherwise, unless it happens to be sitting on the currently active channel. This patch implements automatic channel selection when the user has not locked the interface onto a specific channel. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04mac80211: make listen_interval be limited by low level driverTomas Winkler
This patch makes possible for a driver to specify maximal listen interval The possibility for user to configure listen interval is not implemented yet, currently the maximum provided by the driver or 1 is used. Mac80211 uses config handler to set listen interval for to the driver. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04mac80211: pass dtim_period to low level driverEmmanuel Grumbach
This patch adds the dtim_period in ieee80211_bss_conf, this allows the low level driver to know the dtim_period, and to plan power save accordingly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-03net: eliminate refcounting in backlog queueStephen Hemminger
Avoid the overhead of atomic increment/decrement on each received packet. This helps performance of non-NAPI devices (like loopback). Use cleanup function to walk queue on each cpu and clean out any left over packets. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-03ipv6: Do not drop packet if skb->local_df is set to trueWei Yongjun
The old code will drop IPv6 packet if ipfragok is not set, since ipfragok is obsoleted, will be instead by used skb->local_df, so this check must be changed to skb->local_df. This patch fix this problem and not drop packet if skb->local_df is set to true. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-03sctp: Drop ipfargok in sctp_xmit functionHerbert Xu
The ipfragok flag controls whether the packet may be fragmented either on the local host on beyond. The latter is only valid on IPv4. In fact, we never want to do the latter even on IPv4 when PMTU is enabled. This is because even though we can't fragment packets within SCTP due to the prtocol's inherent faults, we can still fragment it at IP layer. By setting the DF bit we will improve the PMTU process. RFC 2960 only says that we SHOULD clear the DF bit in this case, so we're compliant even if we set the DF bit. In fact RFC 4960 no longer has this statement. Once we make this change, we only need to control the local fragmentation. There is already a bit in the skb which controls that, local_df. So this patch sets that instead of using the ipfragok argument. The only complication is that there isn't a struct sock object per transport, so for IPv4 we have to resort to changing the pmtudisc field for every packet. This should be safe though as the protocol is single-threaded. Note that after this patch we can remove ipfragok from the rest of the stack too. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-03ipv6: Fix the return value of Set Hop-by-Hop options header with NULL data ↵Yang Hongyang
pointer When Set Hop-by-Hop options header with NULL data pointer and optlen is not zero use setsockopt(), the kernel successfully return 0 instead of return error EINVAL or EFAULT. This patch fix the problem. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-03ipv6: syncookies: free reqsk on xfrm_lookup errorFlorian Westphal
cookie_v6_check() did not call reqsk_free() if xfrm_lookup() fails, leaking the request sock. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-03net: Add missing extra2 parameter for ip_default_ttl sysctlSven Wegener
Commit 76e6ebfb40a2455c18234dcb0f9df37533215461 ("netns: add namespace parameter to rt_cache_flush") acceses the extra2 parameter of the ip_default_ttl ctl_table, but it is never set to a meaningful value. When e84f84f276473dcc673f360e8ff3203148bdf0e2 ("netns: place rt_genid into struct net") is applied, we'll oops in rt_cache_invalidate(). Set extra2 to init_net, to avoid that. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-03net: use software GSO for SG+CSUM capable netdevicesLennert Buytenhek
If a netdevice does not support hardware GSO, allowing the stack to use GSO anyway and then splitting the GSO skb into MSS-sized pieces as it is handed to the netdevice for transmitting is likely still a win as far as throughput and/or CPU usage are concerned, since it reduces the number of trips through the output path. This patch enables the use of GSO on any netdevice that supports SG. If a GSO skb is then sent to a netdevice that supports SG but does not support hardware GSO, net/core/dev.c:dev_hard_start_xmit() will take care of doing the necessary GSO segmentation in software. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-03net: fix missing pneigh entries in the neighbor seq_file codeChris Larson
When pneigh entries exist, but the user's read buffer isn't sufficient to hold them all, one of the pneigh entries will be missing from the results. In neigh_get_idx_any, the number of elements which neigh_get_idx encountered is not correctly subtracted from the position number before the call to pneigh_get_idx. neigh_get_idx reduces the position by 1 for each call to neigh_get_next, but it does not reduce it by one for the first element (neigh_get_first). The patch alters the neigh_get_idx and pneigh_get_idx functions to subtract one from pos, for the first element, when pos is non-zero. Signed-off-by: Chris Larson <clarson@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-03net: in the first call to neigh_seq_next, call neigh_get_first, not ↵Chris Larson
neigh_get_idx. neigh_seq_next won't be called both with *pos > 0 && v == SEQ_START_TOKEN, so there's no point calling neigh_get_idx when we're on the start token, just call neigh_get_first directly. Signed-off-by: Chris Larson <clarson@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-02mac80211: Use queue_lock() in ieee80211_ht_agg_queue_remove().David S. Miller
qdisc_root_lock() is only %100 safe to use when the RTNL semaphore is held. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-02pkt_sched: Use qdisc_lock() on already sampled root qdisc.David S. Miller
Based upon a bug report by Jeff Kirsher. Don't use qdisc_root_lock() in these cases as the root qdisc could have been changed, and we'd thus lock the wrong object. Tested by Emil S Tantilov who confirms that this seems to fix the problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-08-01mac80211: fix fragmentation kludgeTomas Winkler
This patch make mac80211 transmit correctly fragmented packet after queue was stopped Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01RFKILL: set the status of the leds on activation.Dmitry Baryshkov
Provide default activate function to set the state of the led when the led becomes bound to the trigger Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01RFKILL: allow one to specify led trigger nameDmitry Baryshkov
Allow the rfkill driver to specify led trigger name. By default it still defaults to the name of rfkill switch. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>