aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2007-07-16Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (37 commits) forcedeth bug fix: realtek phy forcedeth bug fix: vitesse phy forcedeth bug fix: cicada phy atl1: reorder atl1_main functions atl1: fix excessively indented code atl1: cleanup atl1_main atl1: header file cleanup atl1: remove irq_sem cdc-subset to support new vendor/product ID 8139cp: implement the missing dev->tx_timeout myri10ge: Remove nonsensical limit in the tx done routine gianfar: kill unused header EP93XX_ETH must select MII macb: Add multicast capability macb: Use generic PHY layer s390: add barriers to qeth driver s390: scatter-gather for inbound traffic in qeth driver eHEA: Introducing support vor DLPAR memory add Fix a potential NULL pointer dereference in free_shared_mem() in drivers/net/s2io.c [PATCH] softmac: Fix ESSID problem ...
2007-07-16Merge branch 'upstream-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2007-07-16Revert "[NET]: Fix races in net_rx_action vs netpoll."Linus Torvalds
This reverts commit 29578624e354f56143d92510fff33a8b2aaa2c03. Ingo Molnar reports complete breakage with his e1000 card (no networking, card reports transmit timeouts), and bisected it down to this commit. Let's figure out what went wrong, but not keep breaking machines until we do. Cc: Ingo Molnar <mingo@elte.hu> Cc: Olaf Kirch <olaf.kirch@oracle.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Audit: add TTY input auditingMiloslav Trmac
Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16O_CLOEXEC for SCM_RIGHTSUlrich Drepper
Part two in the O_CLOEXEC saga: adding support for file descriptors received through Unix domain sockets. The patch is once again pretty minimal, it introduces a new flag for recvmsg and passes it just like the existing MSG_CMSG_COMPAT flag. I think this bit is not used otherwise but the networking people will know better. This new flag is not recognized by recvfrom and recv. These functions cannot be used for that purpose and the asymmetry this introduces is not worse than the already existing MSG_CMSG_COMPAT situations. The patch must be applied on the patch which introduced O_CLOEXEC. It has to remove static from the new get_unused_fd_flags function but since scm.c cannot live in a module the function still hasn't to be exported. Here's a test program to make sure the code works. It's so much longer than the actual patch... #include <errno.h> #include <error.h> #include <fcntl.h> #include <stdio.h> #include <string.h> #include <unistd.h> #include <sys/socket.h> #include <sys/un.h> #ifndef O_CLOEXEC # define O_CLOEXEC 02000000 #endif #ifndef MSG_CMSG_CLOEXEC # define MSG_CMSG_CLOEXEC 0x40000000 #endif int main (int argc, char *argv[]) { if (argc > 1) { int fd = atol (argv[1]); printf ("child: fd = %d\n", fd); if (fcntl (fd, F_GETFD) == 0 || errno != EBADF) { puts ("file descriptor valid in child"); return 1; } return 0; } struct sockaddr_un sun; strcpy (sun.sun_path, "./testsocket"); sun.sun_family = AF_UNIX; char databuf[] = "hello"; struct iovec iov[1]; iov[0].iov_base = databuf; iov[0].iov_len = sizeof (databuf); union { struct cmsghdr hdr; char bytes[CMSG_SPACE (sizeof (int))]; } buf; struct msghdr msg = { .msg_iov = iov, .msg_iovlen = 1, .msg_control = buf.bytes, .msg_controllen = sizeof (buf) }; struct cmsghdr *cmsg = CMSG_FIRSTHDR (&msg); cmsg->cmsg_level = SOL_SOCKET; cmsg->cmsg_type = SCM_RIGHTS; cmsg->cmsg_len = CMSG_LEN (sizeof (int)); msg.msg_controllen = cmsg->cmsg_len; pid_t child = fork (); if (child == -1) error (1, errno, "fork"); if (child == 0) { int sock = socket (PF_UNIX, SOCK_STREAM, 0); if (sock < 0) error (1, errno, "socket"); if (bind (sock, (struct sockaddr *) &sun, sizeof (sun)) < 0) error (1, errno, "bind"); if (listen (sock, SOMAXCONN) < 0) error (1, errno, "listen"); int conn = accept (sock, NULL, NULL); if (conn == -1) error (1, errno, "accept"); *(int *) CMSG_DATA (cmsg) = sock; if (sendmsg (conn, &msg, MSG_NOSIGNAL) < 0) error (1, errno, "sendmsg"); return 0; } /* For a test suite this should be more robust like a barrier in shared memory. */ sleep (1); int sock = socket (PF_UNIX, SOCK_STREAM, 0); if (sock < 0) error (1, errno, "socket"); if (connect (sock, (struct sockaddr *) &sun, sizeof (sun)) < 0) error (1, errno, "connect"); unlink (sun.sun_path); *(int *) CMSG_DATA (cmsg) = -1; if (recvmsg (sock, &msg, MSG_CMSG_CLOEXEC) < 0) error (1, errno, "recvmsg"); int fd = *(int *) CMSG_DATA (cmsg); if (fd == -1) error (1, 0, "no descriptor received"); char fdname[20]; snprintf (fdname, sizeof (fdname), "%d", fd); execl ("/proc/self/exe", argv[0], fdname, NULL); puts ("execl failed"); return 1; } [akpm@linux-foundation.org: Fix fastcall inconsistency noted by Michael Buesch] [akpm@linux-foundation.org: build fix] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michael Buesch <mb@bu3sch.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16authgss build fixAndrew Morton
Recent breakage.. net/sunrpc/auth_gss/auth_gss.c:1002: warning: implicit declaration of function 'lock_kernel' net/sunrpc/auth_gss/auth_gss.c:1004: warning: implicit declaration of function 'unlock_kernel' Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits) [TCP]: Verify the presence of RETRANS bit when leaving FRTO [IPV6]: Call inet6addr_chain notifiers on link down [NET_SCHED]: Kill CONFIG_NET_CLS_POLICE [NET_SCHED]: act_api: qdisc internal reclassify support [NET_SCHED]: sch_dsmark: act_api support [NET_SCHED]: sch_atm: act_api support [NET_SCHED]: sch_atm: Lindent [IPV6]: MSG_ERRQUEUE messages do not pass to connected raw sockets [IPV4]: Cleanup call to __neigh_lookup() [NET_SCHED]: Revert "avoid transmit softirq on watchdog wakeup" optimization [NETFILTER]: nf_conntrack: UDPLITE support [NETFILTER]: nf_conntrack: mark protocols __read_mostly [NETFILTER]: x_tables: add connlimit match [NETFILTER]: Lower *tables printk severity [NETFILTER]: nf_conntrack: Don't track locally generated special ICMP error [NETFILTER]: nf_conntrack: Introduces nf_ct_get_tuplepr and uses it [NETFILTER]: nf_conntrack: make l3proto->prepare() generic and renames it [NETFILTER]: nf_conntrack: Increment error count on parsing IPv4 header [NET]: Add ethtool support for NETIF_F_IPV6_CSUM devices. [AF_IUCV]: Add lock when updating accept_q ...
2007-07-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: fix a race condition bug in umount which caused a segfault 9p: re-enable mount time debug option 9p: cache meta-data when cache=loose net/9p: set error to EREMOTEIO if trans->write returns zero net/9p: change net/9p module name to 9pnet 9p: Reorganization of 9p file system code
2007-07-15fallout from constified seq_operationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15[TCP]: Verify the presence of RETRANS bit when leaving FRTOIlpo Järvinen
For yet unknown reason, something cleared SACKED_RETRANS bit underneath FRTO. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-15[IPV6]: Call inet6addr_chain notifiers on link downVlad Yasevich
Currently if the link is brought down via ip link or ifconfig down, the inet6addr_chain notifiers are not called even though all the addresses are removed from the interface. This caused SCTP to add duplicate addresses to it's list. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-15[NET_SCHED]: Kill CONFIG_NET_CLS_POLICEPatrick McHardy
The NET_CLS_ACT option is now a full replacement for NET_CLS_POLICE, remove the old code. The config option will be kept around to select the equivalent NET_CLS_ACT options for a short time to allow easier upgrades. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-15[NET_SCHED]: act_api: qdisc internal reclassify supportPatrick McHardy
The behaviour of NET_CLS_POLICE for TC_POLICE_RECLASSIFY was to return it to the qdisc, which could handle it internally or ignore it. With NET_CLS_ACT however, tc_classify starts over at the first classifier and never returns it to the qdisc. This makes it impossible to support qdisc-internal reclassification, which in turn makes it impossible to remove the old NET_CLS_POLICE code without breaking compatibility since we have two qdiscs (CBQ and ATM) that support this. This patch adds a tc_classify_compat function that handles reclassification the old way and changes CBQ and ATM to use it. This again is of course not fully backwards compatible with the previous NET_CLS_ACT behaviour. Unfortunately there is no way to fully maintain compatibility *and* support qdisc internal reclassification with NET_CLS_ACT, but this seems like the better choice over keeping the two incompatible options around forever. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-15[NET_SCHED]: sch_dsmark: act_api supportPatrick McHardy
Handle act_api classification results. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-15[NET_SCHED]: sch_atm: act_api supportPatrick McHardy
Handle act_api classification results. The ATM scheduler behaves slightly different than other schedulers in that it only handles policer results for successful classifications, this behaviour is retained for the act_api case. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-15[NET_SCHED]: sch_atm: LindentPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[IPV6]: MSG_ERRQUEUE messages do not pass to connected raw socketsDmitry Butskoy
From: Dmitry Butskoy <dmitry@butskoy.name> Taken from http://bugzilla.kernel.org/show_bug.cgi?id=8747 Problem Description: It is related to the possibility to obtain MSG_ERRQUEUE messages from the udp and raw sockets, both connected and unconnected. There is a little typo in net/ipv6/icmp.c code, which prevents such messages to be delivered to the errqueue of the correspond raw socket, when the socket is CONNECTED. The typo is due to swap of local/remote addresses. Consider __raw_v6_lookup() function from net/ipv6/raw.c. When a raw socket is looked up usual way, it is something like: sk = __raw_v6_lookup(sk, nexthdr, daddr, saddr, IP6CB(skb)->iif); where "daddr" is a destination address of the incoming packet (IOW our local address), "saddr" is a source address of the incoming packet (the remote end). But when the raw socket is looked up for some icmp error report, in net/ipv6/icmp.c:icmpv6_notify() , daddr/saddr are obtained from the echoed fragment of the "bad" packet, i.e. "daddr" is the original destination address of that packet, "saddr" is our local address. Hence, for icmpv6_notify() must use "saddr, daddr" in its arguments, not "daddr, saddr" ... Steps to reproduce: Create some raw socket, connect it to an address, and cause some error situation: f.e. set ttl=1 where the remote address is more than 1 hop to reach. Set IPV6_RECVERR . Then send something and wait for the error (f.e. poll() with POLLERR|POLLIN). You should receive "time exceeded" icmp message (because of "ttl=1"), but the socket do not receive it. If you do not connect your raw socket, you will receive MSG_ERRQUEUE successfully. (The reason is that for unconnected socket there are no actual checks for local/remote addresses). Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[IPV4]: Cleanup call to __neigh_lookup()Jean Delvare
Back in the times of Linux 2.2, negative values for the creat parameter of __neigh_lookup() had a particular meaning, but no longer, so we should pass 1 instead. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET_SCHED]: Revert "avoid transmit softirq on watchdog wakeup" optimizationPatrick McHardy
As noticed by Ranko Zivojnovic <ranko@spidernet.net>, calling qdisc_run from the timer handler can result in deadlock: > CPU#0 > > qdisc_watchdog() fires and gets dev->queue_lock > qdisc_run()...qdisc_restart()... > -> releases dev->queue_lock and enters dev_hard_start_xmit() > > CPU#1 > > tc del qdisc dev ... > qdisc_graft()...dev_graft_qdisc()...dev_deactivate()... > -> grabs dev->queue_lock ... > > qdisc_reset()...{cbq,hfsc,htb,netem,tbf}_reset()...qdisc_watchdog_cancel()... > -> hrtimer_cancel() - waiting for the qdisc_watchdog() to exit, while still > holding dev->queue_lock > > CPU#0 > > dev_hard_start_xmit() returns ... > -> wants to get dev->queue_lock(!) > > DEADLOCK! The entire optimization is a bit questionable IMO, it moves potentially large parts of NET_TX_SOFTIRQ work to TIMER_SOFTIRQ/HRTIMER_SOFTIRQ, which kind of defeats the separation of them. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Ranko Zivojnovic <ranko@spidernet.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: UDPLITE supportPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: mark protocols __read_mostlyPatrick McHardy
Also remove two unnecessary EXPORT_SYMBOLs and move the nf_conntrack_l3proto_ipv4 declaration to the correct file. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: x_tables: add connlimit matchJan Engelhardt
ipt_connlimit has been sitting in POM-NG for a long time. Here is a new shiny xt_connlimit with: * xtables'ified * will request the layer3 module (previously it hotdropped every packet when it was not loaded) * fixed: there was a deadlock in case of an OOM condition * support for any layer4 protocol (e.g. UDP/SCTP) * using jhash, as suggested by Eric Dumazet * ipv6 support Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: Lower *tables printk severityPatrick McHardy
Lower ip6tables, arptables and ebtables printk severity similar to Dan Aloni's patch for iptables. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: Don't track locally generated special ICMP errorYasuyuki Kozakai
The conntrack assigned to locally generated ICMP error is usually the one assigned to the original packet which has caused the error. But if the original packet is handled as invalid by nf_conntrack, no conntrack is assigned to the original packet. Then nf_ct_attach() cannot assign any conntrack to the ICMP error packet. In that case the current nf_conntrack_icmp assigns appropriate conntrack to it. But the current code mistakes the direction of the packet. As a result, NAT code mistakes the address to be mangled. To fix the bug, this changes nf_conntrack_icmp not to assign conntrack to such ICMP error. Actually no address is necessary to be mangled in this case. Spotted by Jordan Russell. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: Introduces nf_ct_get_tuplepr and uses itYasuyuki Kozakai
nf_ct_get_tuple() requires the offset to transport header and that bothers callers such as icmp[v6] l4proto modules. This introduces new function to simplify them. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: make l3proto->prepare() generic and renames itYasuyuki Kozakai
The icmp[v6] l4proto modules parse headers in ICMP[v6] error to get tuple. But they have to find the offset to transport protocol header before that. Their processings are almost same as prepare() of l3proto modules. This makes prepare() more generic to simplify icmp[v6] l4proto module later. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: Increment error count on parsing IPv4 headerYasuyuki Kozakai
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: Add ethtool support for NETIF_F_IPV6_CSUM devices.Michael Chan
Add ethtool utility function to set or clear IPV6_CSUM feature flag. Modify tg3.c and bnx2.c to use this function when doing ethtool -K to change tx checksum. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[AF_IUCV]: Add lock when updating accept_qUrsula Braun
The accept_queue of an af_iucv socket will be corrupted, if adding and deleting of entries in this queue occurs at the same time (connect request from one client, while accept call is processed for another client). Solution: add locking when updating accept_q Signed-off-by: Ursula Braun <braunu@de.ibm.com> Acked-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[AF_IUCV]: Avoid deadlock between iucv_path_connect and tasklet.Ursula Braun
An iucv deadlock may occur, where one CPU is spinning on the iucv_table_lock for iucv_tasklet_fn(), while another CPU is holding the iucv_table_lock for an iucv_path_connect() and is waiting for the first CPU in an smp_call_function. Solution: replace spin_lock in iucv_tasklet_fn by spin_trylock and reschedule tasklet in case of non-granted lock. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Acked-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[AF_IUCV]: Improve description of IUCV and AFIUCV configuration options.Jennifer Hunt
Signed-off-by: Jennifer Hunt <jenhunt@us.ibm.com> Signed-off-by: Ursula Braun >braunu@de.ibm.com> Acked-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[INET_SOCK]: make net/ipv4/inet_timewait_sock.c:__inet_twsk_kill() staticAdrian Bunk
This patch makes the needlessly global __inet_twsk_kill() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2007-07-14[TCP]: tcp probe add back ssthresh fieldStephen Hemminger
Sangtae noticed the ssthresh got missed. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Fix memset lengthPatrick McHardy
Fix sizeof(ETH_ALEN) Introduced by my rtnl_link patches. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: Add macvlan driverPatrick McHardy
Add macvlan driver, which allows to create virtual ethernet devices based on MAC address. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Use multicast list synchronization helpersPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Fix promiscous/allmulti synchronization racesPatrick McHardy
The set_multicast_list function may be called without holding the rtnl mutex, resulting in races when changing the underlying device's promiscous and allmulti state. Use the change_rx_mode hook, which is always invoked under the rtnl. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: dev_mcast: add multicast list synchronization helpersPatrick McHardy
The method drivers currently use to synchronize multicast lists is not very pretty: - walk the multicast list - search each entry on a copy of the previous list - if new add to lower device - walk the copy of the previous list - search each entry on the current list - if removed delete from lower device - copy entire list This patch adds a new field to struct dev_addr_list to store the synchronization state and adds two helper functions for synchronization and cleanup. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: Add net_device change_rx_mode callbackPatrick McHardy
Currently the set_multicast_list (and set_rx_mode) callbacks are responsible for configuring the device according to the IFF_PROMISC, IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in case of set_rx_mode). These callbacks can be invoked from BH context without the rtnl_mutex by dev_mc_add/dev_mc_delete, which makes reading the device flags and promiscous/allmulti count racy. For real hardware drivers that just commit all changes to the hardware this is not a real problem since the stack guarantees to call them for every change, so at least the final call will not race and commit the correct configuration to the hardware. For software devices that want to synchronize promiscous and multicast state to an underlying device however this can cause corruption of the underlying device's flags or promisc/allmulti counts. When the software device is concurrently put in promiscous or allmulti mode while set_multicast_list is invoked from bottem half context, the device might synchronize the change to the underlying device without holding the rtnl_mutex, which races with concurrent changes to the underlying device. Add a dev->change_rx_flags hook that is invoked when any of the flags that affect rx filtering change (under the rtnl_mutex), which allows drivers to perform synchronization immediately and only synchronize the address lists in set_multicast_list/set_rx_mode. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[RFKILL]: fix net/rfkill/rfkill-input.c bug on 64-bit systemsIngo Molnar
Subject: [patch] net/input: fix net/rfkill/rfkill-input.c bug on 64-bit systems this recent commit: commit cf4328cd949c2086091c62c5685f1580fe9b55e4 Author: Ivo van Doorn <IvDoorn@gmail.com> Date: Mon May 7 00:34:20 2007 -0700 [NET]: rfkill: add support for input key to control wireless radio added this 64-bit bug: .... unsigned int flags; spin_lock_irqsave(&task->lock, flags); .... irq 'flags' must be unsigned long, not unsigned int. The -rt tree has strict checks about this on 64-bit so this triggered a build failure. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-149p: fix a race condition bug in umount which caused a segfaultEric Van Hensbergen
umounting partitions after heavy activity would sometimes trigger a segmentation violation. This fix appears to remove that problem. Fix originally provided by Latchesar Ionkov. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-14net/9p: set error to EREMOTEIO if trans->write returns zeroLatchesar Ionkov
If trans->write returns 0, p9_write_work goes through the error path, but sets the error code to zero. This patch sets the error code to EREMOTEIO if trans->write returns zero value. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
2007-07-14net/9p: change net/9p module name to 9pnetLatchesar Ionkov
Change module name of net/9p module from 9p.ko to 9pnet.ko. fs/9p module already uses 9p.ko name. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
2007-07-149p: Reorganization of 9p file system codeLatchesar Ionkov
This patchset moves non-filesystem interfaces of v9fs from fs/9p to net/9p. It moves the transport, packet marshalling and connection layers to net/9p leaving only the VFS related files in fs/9p. This work is being done in preparation for in-kernel 9p servers as well as alternate 9p clients (other than VFS). Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-13Merge git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (122 commits) sunrpc: drop BKL around wrap and unwrap NFSv4: Make sure unlock is really an unlock when cancelling a lock NLM: fix source address of callback to client SUNRPC client: add interface for binding to a local address SUNRPC server: record the destination address of a request SUNRPC: cleanup transport creation argument passing NFSv4: Make the NFS state model work with the nosharedcache mount option NFS: Error when mounting the same filesystem with different options NFS: Add the mount option "nosharecache" NFS: Add support for mounting NFSv4 file systems with string options NFS: Add final pieces to support in-kernel mount option parsing NFS: Introduce generic mount client API NFS: Add enums and match tables for mount option parsing NFS: Improve debugging output in NFS in-kernel mount client NFS: Clean up in-kernel NFS mount NFS: Remake nfsroot_mount as a permanent part of NFS client SUNRPC: Add a convenient default for the hostname when calling rpc_create() SUNRPC: Rename rpcb_getport to be consistent with new rpcb_getport_sync name SUNRPC: Rename rpcb_getport_external routine SUNRPC: Allow rpcbind requests to be interrupted by a signal. ...
2007-07-13Merge branch 'ioat-md-accel-for-linus' of ↵Linus Torvalds
git://lost.foo-projects.org/~dwillia2/git/iop * 'ioat-md-accel-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: (28 commits) ioatdma: add the unisys "i/oat" pci vendor/device id ARM: Add drivers/dma to arch/arm/Kconfig iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driver iop13xx: surface the iop13xx adma units to the iop-adma driver dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines md: remove raid5 compute_block and compute_parity5 md: handle_stripe5 - request io processing in raid5_run_ops md: handle_stripe5 - add request/completion logic for async expand ops md: handle_stripe5 - add request/completion logic for async read ops md: handle_stripe5 - add request/completion logic for async check ops md: handle_stripe5 - add request/completion logic for async compute ops md: handle_stripe5 - add request/completion logic for async write ops md: common infrastructure for running operations with raid5_run_ops md: raid5_run_ops - run stripe operations outside sh->lock raid5: replace custom debug PRINTKs with standard pr_debug raid5: refactor handle_stripe5 and handle_stripe6 (v3) async_tx: add the async_tx api xor: make 'xor_blocks' a library routine for use with async_tx dmaengine: make clients responsible for managing channels dmaengine: refactor dmaengine around dma_async_tx_descriptor ...
2007-07-13dmaengine: make clients responsible for managing channelsDan Williams
The current implementation assumes that a channel will only be used by one client at a time. In order to enable channel sharing the dmaengine core is changed to a model where clients subscribe to channel-available-events. Instead of tracking how many channels a client wants and how many it has received the core just broadcasts the available channels and lets the clients optionally take a reference. The core learns about the clients' needs at dma_event_callback time. In support of multiple operation types, clients can specify a capability mask to only be notified of channels that satisfy a certain set of capabilities. Changelog: * removed DMA_TX_ARRAY_INIT, no longer needed * dma_client_chan_free -> dma_chan_release: switch to global reference counting only at device unregistration time, before it was also happening at client unregistration time * clients now return dma_state_client to dmaengine (ack, dup, nak) * checkpatch.pl fixes * fixup merge with git-ioat Cc: Chris Leech <christopher.leech@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits) sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes sysfs: make directory dentries and inodes reclaimable sysfs: implement sysfs_get_dentry() sysfs: move sysfs_drop_dentry() to dir.c and make it static sysfs: restructure add/remove paths and fix inode update sysfs: use sysfs_mutex to protect the sysfs_dirent tree sysfs: consolidate sysfs spinlocks sysfs: make kobj point to sysfs_dirent instead of dentry sysfs: implement sysfs_find_dirent() and sysfs_get_dirent() sysfs: implement SYSFS_FLAG_REMOVED flag sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags sysfs: make sysfs_drop_dentry() access inodes using ilookup() sysfs: Fix oops in sysfs_drop_dentry on x86_64 sysfs: use singly-linked list for sysfs_dirent tree sysfs: slim down sysfs_dirent->s_active sysfs: move s_active functions to fs/sysfs/dir.c sysfs: fix root sysfs_dirent -> root dentry association sysfs: use iget_locked() instead of new_inode() sysfs: reorganize sysfs_new_indoe() and sysfs_create() sysfs: fix parent refcounting during rename and move ...
2007-07-12[PATCH] mac80211: improved 802.11g CTS protectionDaniel Drake
Currently, CTS protection is partially implemented twice: 1. via prism2 ioctls, only used by hostapd 2. via STA beacon parsing, recorded in sta.use_protection but never used (other than printed in debugfs) Protection control should be implemented on a per-subif basis. For example, a single physical device may be running a soft AP on one channel, and a STA on another. The AP interface should use protection based on what hostapd told it, and the STA interface should use protection based on beacon parsing. These should operate independantly: one subif using protection should not influence the other. To implement this, I moved the use_protection flag into ieee80211_sub_if_data and removed the device-global cts_protect_erp_frames flag. I also made the PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES write operation only available for AP interfaces, to avoid any possibility of the user messing with the behaviour of a STA. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>