aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2007-09-11[IPV4] devinet: show all addresses assigned to interfaceStephen Hemminger
Bug: http://bugzilla.kernel.org/show_bug.cgi?id=8876 Not all ips are shown by "ip addr show" command when IPs number assigned to an interface is more than 60-80 (in fact it depends on broadcast/label etc presence on each address). Steps to reproduce: It's terribly simple to reproduce: # for i in $(seq 1 100); do ip ad add 10.0.$i.1/24 dev eth10 ; done # ip addr show this will _not_ show all IPs. Looks like the problem is in netlink/ipv4 message processing. This is fix from bug submitter, it looks correct. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-11[NET]: Do not dereference iov if length is zeroHerbert Xu
When msg_iovlen is zero we shouldn't try to dereference msg_iov. Right now the only thing that tries to do so is skb_copy_and_csum_datagram_iovec. Since the total length should also be zero if msg_iovlen is zero, it's sufficient to check the total length there and simply return if it's zero. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-09[Bluetooth] Fix parameter list for event filter commandMarcel Holtmann
On device initialization the event filters are cleared. In case of clearing the filters the extra condition type shall be omitted. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09[Bluetooth] Update security filter for Bluetooth 2.1Marcel Holtmann
This patch updates the HCI security filter with support for the Bluetooth 2.1 commands and events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09[Bluetooth] Add compat handling for timestamp structureMarcel Holtmann
The timestamp structure needs special handling in case of compat programs. Use the same wrapping method the network core uses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-08-31[TCP]: 'dst' can be NULL in tcp_rto_min()David S. Miller
Reported by Rick Jones. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30[PKTGEN]: Remove write-only variable.Pavel Emelyanov
The pktgen_thread.pid is set to current->pid and is never used after this. So remove this at all. Found during isolating the explicit pid/tgid usage. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30[NETFILTER]: xt_tcpudp: fix wrong struct in udp_checkentryJesper Bengtsson
It doesn't seem to have any effect on the x86 architecture but it does have effect on the Axis CRIS architecture. Signed-off-by: Jesper Bengtsson <jesper.bengtsson@axis.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30[NET_SCHED] sch_prio.c: remove duplicate call of tc_classify()Lucas Nussbaum
When CONFIG_NET_CLS_ACT is enabled, tc_classify() is called twice in prio_classify(). This causes "interesting" behaviour: with the setup below, packets are duplicated, sent twice to ifb0, and then loop in and out of ifb0. The patch uses the previously calculated return value in the switch, which is probably what Patrick had in mind in commit bdba91ec70fb5ccbdeb1c7068319adc6ea9e1a7d -- maybe Patrick can double-check this? -- example setup -- ifconfig ifb0 up tc qdisc add dev ifb0 root netem delay 2s tc qdisc add dev $ETH root handle 1: prio tc filter add dev $ETH parent 1: protocol ip prio 10 u32 \ match ip dst 172.24.110.6/32 flowid 1:1 \ action mirred egress redirect dev ifb0 ping -c1 172.24.110.6 Signed-off-by: Lucas Nussbaum <lucas.nussbaum@imag.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30[BRIDGE]: Fix OOPS when bridging device without ethtool.Stephen Hemminger
Bridge code calls ethtool to get speed. The conversion to using only ethtool_ops broke the case of devices without ethtool_ops. This is a new regression in 2.6.23. Rearranged the switch to a logical order, and use gcc initializer. Ps: speed should have been part of the network device structure from the start rather than burying it in ethtool. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Acked-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30[BRIDGE]: Packets leaking out of disabled/blocked ports.Stephen Hemminger
This patch fixes some packet leakage in bridge. The bridging code was allowing forward table entries to be generated even if a device was being blocked. The fix is to not add forwarding database entries unless the port is active. The bug arose as part of the conversion to processing STP frames through normal receive path (in 2.6.17). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-dev
2007-08-30[TCP]: Allow minimum RTO to be configurable via routing metrics.David S. Miller
Cell phone networks do link layer retransmissions and other things that cause unnecessary timeout retransmits. So allow the minimum RTO to be inflated per-route to deal with this. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30SCTP: Fix to handle invalid parameter length correctlyWei Yongjun
If an INIT with invalid parameter length look like this: Parameter Type : 1 Parameter Length: 800 and not contain any payload, SCTP will ignore this parameter and send back a INIT-ACK. This patch is fix to handle this invalid parameter length correctly. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30SCTP: Abort on COOKIE-ECHO if backlog is exceeded.Vlad Yasevich
Currently we abort on the INIT chunk we our backlog is currenlty exceeded. Delay this about untill COOKIE-ECHO to give the user time to accept the socket. Also, make sure that we treat sk_max_backlog of 0 as no connections allowed. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30SCTP: Correctly disable listening when backlog is 0.Vlad Yasevich
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30SCTP: Do not retransmit chunks that are newer then rtt.Vlad Yasevich
When performing a retransmit, do not include the chunk if it was sent less then 1 rtt ago. The reason is that we may receive the SACK very soon and wouldn't retransmit. Suggested by Randy Stewart. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30SCTP: Uncomfirmed transports can't become InactiveVlad Yasevich
Do not set Unconfirmed transports to Inactive state. This may result in an inactive association being destroyed since we start counting errors on "inactive" transports against the association. This was found at the SCTP interop event. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30SCTP: Pick the correct port when binding to 0.Vlad Yasevich
sctp_bindx() allows the use of unspecified port. The problem is that every address we bind to ends up selecting a new port if the user specified port 0. This patch allows re-use of the already selected port when the port from bindx was 0. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30SCTP: Use net_ratelimit to suppress error messages print too fastWei Yongjun
When multi bundling SHUTDOWN-ACK message is received in ESTAB state, this will cause "sctp protocol violation state" message print many times. If SHUTDOWN-ACK is bundled 300 times in one packet, message will be print 300 times. The same problem also exists when received unexpected HEARTBEAT-ACK message which is bundled message times. This patch used net_ratelimit() to suppress error messages print too fast. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30SCTP: Fix to encode PROTOCOL VIOLATION error cause correctlyWei Yongjun
PROTOCOL VIOLATION error cause in ABORT is bad encode when make abort chunk. When SCTP encode ABORT chunk with PROTOCOL VIOLATION error cause, it just add the error messages to PROTOCOL VIOLATION error cause, the rest four bytes(struct sctp_paramhdr) is just add to the chunk, not change the length of error cause. This cause the ABORT chunk to be a bad format. The chunk is like this: ABORT chunk Chunk type: ABORT (6) Chunk flags: 0x00 Chunk length: 72 (*1) Protocol violation cause Cause code: Protocol violation (0x000d) Cause length: 62 (*2) Cause information: 5468652063756D756C61746976652074736E2061636B2062... Cause padding: 0000 [Needless] 00030010 Chunk Length(*1) = 72 but Cause length(*2) only 62, not include the extend 4 bytes. ((72 - sizeof(chunk_hdr)) = 68) != (62 +3) / 4 * 4 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30SCTP: Fix sctp_addto_chunk() to add pad with correct lengthWei Yongjun
At function sctp_addto_chunk(), it do pad before add payload to chunk if chunk length is not 4-byte alignment. But it do pad with a bad length. This patch fixed this probleam. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-29SCTP: Assign stream sequence numbers to the entire messageVlad Yasevich
Currently we only assign the sequence number to a packet that we are about to transmit. This however breaks the Partial Reliability extensions, because it's possible for us to never transmit a packet, i.e. it expires before we get to send it. In such cases, if the message contained multiple SCTP fragments, and we did manage to send the first part of the message, the Stream sequence numbers would get into invalid state and cause receiver to stall. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-29SCTP: properly clean up fragment and ordering queues during FWD-TSN.Vlad Yasevich
When we recieve a FWD-TSN (meaning the peer has abandoned the data), we need to clean up any partially received messages that may be hanging out on the re-assembly or re-ordering queues. This is a MUST requirement that was not properly done before. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com.>
2007-08-28[PKTGEN]: Fix multiqueue oops.Robert Olsson
Initially pkt_dev can be NULL this causes netif_subqueue_stopped to oops. The patch below should cure it. But maybe the pktgen TX logic should be reworked to better support the new multiqueue support. Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[VLAN/BRIDGE]: Fix "skb_pull_rcsum - Fatal exception in interrupt"Evgeniy Polyakov
I tried to preserve bridging code as it was before, but logic is quite strange - I think we should free skb on error, since it is already unshared and thus will just leak. Herbert Xu states: > + if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) > + goto out; If this happens it'll be a double-free on skb since we'll return NF_DROP which makes the caller free it too. We could return NF_STOLEN to prevent that but I'm not sure whether that's correct netfilter semantics. Patrick, could you please make a call on this? Patrick McHardy states: NF_STOLEN should work fine here. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[NET]: Fix crash in dev_mc_sync()/dev_mc_unsync()Benjamin Thery
This patch fixes a crash that may occur when the routine dev_mc_sync() deletes an address from the list it is currently going through. It saves the pointer to the next element before deleting the current one. The problem may also exist in dev_mc_unsync(). Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[NET]: is_power_of_2 in net/core/neighbour.cvignesh babu
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n) Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[TCP]: Describe tcp_init_cwnd() thoroughly in a comment.David S. Miller
People often get tripped up by this function and think that it does not implemented the prescribed algorithms from RFC2414 and RFC3390, even though it does. So add a comment to head off such misunderstandings in the future. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[NET]: Fix IP_ADD/DROP_MEMBERSHIP to handle only connectionlessFlavio Leitner
Fix IP[V6]_ADD_MEMBERSHIP and IP[V6]_DROP_MEMBERSHIP to return -EPROTO for connection oriented sockets. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[IPSEC] AH4: Update IPv4 options handling to conform to RFC 4302.Nick Bowler
In testing our ESP/AH offload hardware, I discovered an issue with how AH handles mutable fields in IPv4. RFC 4302 (AH) states the following on the subject: For IPv4, the entire option is viewed as a unit; so even though the type and length fields within most options are immutable in transit, if an option is classified as mutable, the entire option is zeroed for ICV computation purposes. The current implementation does not zero the type and length fields, resulting in authentication failures when communicating with hosts that do (i.e. FreeBSD). I have tested record route and timestamp options (ping -R and ping -T) on a small network involving Windows XP, FreeBSD 6.2, and Linux hosts, with one router. In the presence of these options, the FreeBSD and Linux hosts (with the patch or with the hardware) can communicate. The Windows XP host simply fails to accept these packets with or without the patch. I have also been trying to test source routing options (using traceroute -g), but haven't had much luck getting this option to work *without* AH, let alone with. Signed-off-by: Nick Bowler <nbowler@ellipticsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: fix bad error path in conversion routines 9p: remove deprecated v9fs_fid_lookup_remove() 9p: update maintainers and documentation 9p: fix use after free
2007-08-239p: fix bad error path in conversion routinesMariusz Kozlowski
When buf_check_overflow() returns != 0 we will hit kfree(ERR_PTR(err)) and it will not be happy about it. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-08-239p: fix use after freeEric Van Hensbergen
On 7/22/07, Adrian Bunk <bunk@stusta.de> wrote: The Coverity checker spotted the following use-after-free in net/9p/mux.c: <-- snip --> ... struct p9_conn *p9_conn_create(struct p9_transport *trans, int msize, unsigned char *extended) { ... if (!m->tagpool) { kfree(m); return ERR_PTR(PTR_ERR(m->tagpool)); } ... <-- snip --> Also spotted was a leak of the same structure further down in the function. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-08-21[IRDA] irda_nl_get_mode: always results in failureAndy Whitcroft
It seems an extraneous trailing ';' has slipped in to the error handling for a name registration failure causing the error path to trigger unconditionally. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-21[IRDA]: Avoid a label defined but not used warning in irda_init()Jesper Juhl
Easily avoidable compiler warnings bug me. Building irmod without CONFIG_SYSCTL currently results in : net/irda/irmod.c:132: warning: label 'out_err_2' defined but not used But that can easily be avoided by simply moving the label inside the existing "#ifdef CONFIG_SYSCTL" one line above it. This patch moves the label and buys us one less warning with no ill effects. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-21[IPV6]: Fix kernel panic while send SCTP data with IP fragmentsWei Yongjun
If ICMP6 message with "Packet Too Big" is received after send SCTP DATA, kernel panic will occur when SCTP DATA is send again. This is because of a bad dest address when call to skb_copy_bits(). The messages sequence is like this: Endpoint A Endpoint B <------- SCTP DATA (size=1432) ICMP6 message -------> (Packet Too Big pmtu=1280) <------- Resend SCTP DATA (size=1432) ------------kernel panic--------------- printing eip: c05be62a *pde = 00000000 Oops: 0002 [#1] SMP Modules linked in: scomm l2cap bluetooth ipv6 dm_mirror dm_mod video output sbs battery lp floppy sg i2c_piix4 i2c_core pcnet32 mii button ac parport_pc parport ide_cd cdrom serio_raw mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd CPU: 0 EIP: 0060:[<c05be62a>] Not tainted VLI EFLAGS: 00010282 (2.6.23-rc2 #1) EIP is at skb_copy_bits+0x4f/0x1ef eax: 000004d0 ebx: ce12a980 ecx: 00000134 edx: cfd5a880 esi: c8246858 edi: 00000000 ebp: c0759b14 esp: c0759adc ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 0, ti=c0759000 task=c06d0340 task.ti=c0713000) Stack: c0759b88 c0405867 ce12a980 c8bff838 c789c084 00000000 00000028 cfd5a880 d09f1890 000005dc 0000007b ce12a980 cfd5a880 c8bff838 c0759b88 d09bc521 000004d0 fffff96c 00000200 00000100 c0759b50 cfd5a880 00000246 c0759bd4 Call Trace: [<c0405e1d>] show_trace_log_lvl+0x1a/0x2f [<c0405ecd>] show_stack_log_lvl+0x9b/0xa3 [<c040608d>] show_registers+0x1b8/0x289 [<c0406271>] die+0x113/0x246 [<c0625dbc>] do_page_fault+0x4ad/0x57e [<c0624642>] error_code+0x72/0x78 [<d09bc521>] ip6_output+0x8e5/0xab2 [ipv6] [<d09bcec1>] ip6_xmit+0x2ea/0x3a3 [ipv6] [<d0a3f2ca>] sctp_v6_xmit+0x248/0x253 [sctp] [<d0a3c934>] sctp_packet_transmit+0x53f/0x5ae [sctp] [<d0a34bf8>] sctp_outq_flush+0x555/0x587 [sctp] [<d0a34d3c>] sctp_retransmit+0xf8/0x10f [sctp] [<d0a3d183>] sctp_icmp_frag_needed+0x57/0x5b [sctp] [<d0a3ece2>] sctp_v6_err+0xcd/0x148 [sctp] [<d09cf1ce>] icmpv6_notify+0xe6/0x167 [ipv6] [<d09d009a>] icmpv6_rcv+0x7d7/0x849 [ipv6] [<d09be240>] ip6_input+0x1dc/0x310 [ipv6] [<d09be965>] ipv6_rcv+0x294/0x2df [ipv6] [<c05c3789>] netif_receive_skb+0x2d2/0x335 [<c05c5733>] process_backlog+0x7f/0xd0 [<c05c58f6>] net_rx_action+0x96/0x17e [<c042e722>] __do_softirq+0x64/0xcd [<c0406f37>] do_softirq+0x5c/0xac ======================= Code: 00 00 29 ca 89 d0 2b 45 e0 89 55 ec 85 c0 7e 35 39 45 08 8b 55 e4 0f 4e 45 08 8b 75 e0 8b 7d dc 89 c1 c1 e9 02 03 b2 a0 00 00 00 <f3> a5 89 c1 83 e1 03 74 02 f3 a4 29 45 08 0f 84 7b 01 00 00 01 EIP: [<c05be62a>] skb_copy_bits+0x4f/0x1ef SS:ESP 0068:c0759adc Kernel panic - not syncing: Fatal exception in interrupt Arnaldo says: ==================== Thanks! I'm to blame for this one, problem was introduced in: b0e380b1d8a8e0aca215df97702f99815f05c094 @@ -761,7 +762,7 @@ slow_path: /* * Copy a block of the IP datagram. */ - if (skb_copy_bits(skb, ptr, frag->h.raw, len)) + if (skb_copy_bits(skb, ptr, skb_transport_header(skb), len)) BUG(); left -= len; ==================== Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-21[SNAP]: Check packet length before readingHerbert Xu
The snap_rcv code reads 5 bytes so we should make sure that we have 5 bytes in the head before proceeding. Based on diagnosis and fix by Evgeniy Polyakov, reported by Alan J. Wylie. Patch also kills the skb->sk assignment before kfree_skb since it's redundant. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-21[DCCP]: Allocation in atomic contextGerrit Renker
This fixes the following bug reported in syslog: [ 4039.051658] BUG: sleeping function called from invalid context at /usr/src/davem-2.6/mm/slab.c:3032 [ 4039.051668] in_atomic():1, irqs_disabled():0 [ 4039.051670] INFO: lockdep is turned off. [ 4039.051674] [<c0104c0f>] show_trace_log_lvl+0x1a/0x30 [ 4039.051687] [<c0104d4d>] show_trace+0x12/0x14 [ 4039.051691] [<c0104d65>] dump_stack+0x16/0x18 [ 4039.051695] [<c011371e>] __might_sleep+0xaf/0xbe [ 4039.051700] [<c0157b66>] __kmalloc+0xb1/0xd0 [ 4039.051706] [<f090416f>] ccid2_hc_tx_alloc_seq+0x35/0xc3 [dccp_ccid2] [ 4039.051717] [<f09048d6>] ccid2_hc_tx_packet_sent+0x27f/0x2d9 [dccp_ccid2] [ 4039.051723] [<f085486b>] dccp_write_xmit+0x1eb/0x338 [dccp] [ 4039.051741] [<f085603d>] dccp_sendmsg+0x113/0x18f [dccp] [ 4039.051750] [<c03907fc>] inet_sendmsg+0x2e/0x4c [ 4039.051758] [<c033a47d>] sock_aio_write+0xd5/0x107 [ 4039.051766] [<c015abc1>] do_sync_write+0xcd/0x11c [ 4039.051772] [<c015b296>] vfs_write+0x118/0x11f [ 4039.051840] [<c015b932>] sys_write+0x3d/0x64 [ 4039.051845] [<c0103e7c>] syscall_call+0x7/0xb [ 4039.051848] ======================= The problem was that GFP_KERNEL was used; fixed by using gfp_any(). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-19missing return in bridge sysfs codeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-15[IPv6]: Invalid semicolon after if statementIlpo Järvinen
A similar fix to netfilter from Eric Dumazet inspired me to look around a bit by using some grep/sed stuff as looking for this kind of bugs seemed easy to automate. This is one of them I found where it looks like this semicolon is not valid. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-15[NET]: Fix unbalanced rcu_read_unlock in __sock_createHerbert Xu
The recent RCU work created an unbalanced rcu_read_unlock in __sock_create. This patch fixes that. Reported by oleg 123. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14Merge branch 'fixes-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2007-08-14[VLAN] net/8021q/vlanproc.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we'd have already oops'ed if "vlandev" was NULL. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14[NET]: Unexport dev_ethtoolAdrian Bunk
This patch removes the no longer used EXPORT_SYMBOL(dev_ethtool). Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14[ECONET]: remove econet_packet_type on unloadAlexey Dobriyan
Steps to reproduce: modprobe econet rmmod econet modprobe econet Unable to handle kernel paging request at ffffffff8870a098 RIP: [<ffffffff8040bfb8>] dev_add_pack+0x48/0x90 PGD 203067 PUD 207063 PMD 7817f067 PTE 0 Oops: 0002 [1] PREEMPT SMP CPU 1 Modules linked in: econet [maaaany] Pid: 10671, comm: modprobe Not tainted 2.6.23-rc3-bloat #6 RIP: 0010:[<ffffffff8040bfb8>] [<ffffffff8040bfb8>] dev_add_pack+0x48/0x90 RSP: 0000:ffff810076293df8 EFLAGS: 00010202 RAX: ffffffff88659090 RBX: ffffffff88659060 RCX: ffffffff8870a090 RDX: 0000000000000080 RSI: ffffffff805ec660 RDI: ffff810078ce4680 RBP: ffff810076293e08 R08: 0000000000000002 R09: 0000000000000000 R10: ffffffff8040bf88 R11: 0000000000000001 R12: ffff810076293e18 R13: 000000000000001b R14: ffff810076dd06b0 R15: ffffffff886590c0 FS: 00002b96a525dae0(0000) GS:ffff81007e0e2138(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffff8870a098 CR3: 000000007bb67000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 10671, threadinfo ffff810076292000, task ffff810078ce4680) Stack: ffff810076dd06b0 0000000000000000 ffff810076293e38 ffffffff8865b180 0000000000800000 0000000000000000 ffffffff886590c0 ffff810076dd01c8 ffff810076293f78 ffffffff8026723c ffff810076293e48 ffffffff886590d8 Call Trace: [<ffffffff8865b180>] :econet:econet_proto_init+0x180/0x1da [<ffffffff8026723c>] sys_init_module+0x15c/0x19e0 [<ffffffff8020c13e>] system_call+0x7e/0x83 Code: 48 89 41 08 48 89 82 e0 c5 5e 80 48 c7 c7 a0 08 5d 80 e8 f1 RIP [<ffffffff8040bfb8>] dev_add_pack+0x48/0x90 RSP <ffff810076293df8> CR2: ffffffff8870a098 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14[AX25]: don't free pointers to statically allocated dataAlexey Dobriyan
commit 8d5cf596d10d740b69b5f4bbdb54b85abf75810d started to add statically allocated ax25_protocol's to list. However kfree() was still in place waiting for unsuspecting ones on module removal. Steps to reproduce: modprobe netrom rmmod netrom P.S.: code would benefit greatly from list_add/list_del usage kernel BUG at mm/slab.c:592! invalid opcode: 0000 [1] PREEMPT SMP CPU 0 Modules linked in: netrom ax25 af_packet usbcore rtc_cmos rtc_core rtc_lib Pid: 4477, comm: rmmod Not tainted 2.6.23-rc3-bloat #2 RIP: 0010:[<ffffffff802ac646>] [<ffffffff802ac646>] kfree+0x1c6/0x260 RSP: 0000:ffff810079a05e48 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81000000c000 RDX: ffff81007e552458 RSI: 0000000000000000 RDI: 000000000000805d RBP: ffff810079a05e88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8805d080 R13: ffffffff8805d080 R14: 0000000000000000 R15: 0000000000000282 FS: 00002b73fc98aae0(0000) GS:ffffffff805dc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000053f3b8 CR3: 0000000079ff2000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 4477, threadinfo ffff810079a04000, task ffff8100775aa480) Stack: ffff810079a05e68 0000000000000246 ffffffff8804eca0 0000000000000000 ffffffff8805d080 00000000000000cf 0000000000000000 0000000000000880 ffff810079a05eb8 ffffffff8803ec90 ffff810079a05eb8 0000000000000000 Call Trace: [<ffffffff8803ec90>] :ax25:ax25_protocol_release+0xa0/0xb0 [<ffffffff88056ecb>] :netrom:nr_exit+0x6b/0xf0 [<ffffffff80268bf0>] sys_delete_module+0x170/0x1f0 [<ffffffff8025da35>] trace_hardirqs_on+0xd5/0x170 [<ffffffff804835aa>] trace_hardirqs_on_thunk+0x35/0x37 [<ffffffff8020c13e>] system_call+0x7e/0x83 Code: 0f 0b eb fe 66 66 90 66 66 90 48 8b 52 10 48 8b 02 25 00 40 RIP [<ffffffff802ac646>] kfree+0x1c6/0x260 RSP <ffff810079a05e48> Kernel panic - not syncing: Fatal exception Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14[PATCH] mac80211: probe for hidden SSIDs in pre-auth scanJohn W. Linville
Probe for hidden SSIDs if initiating pre-authentication scan and SSID is set for STA interface. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-08-14[PATCH] mac80211: fix tx status frame codeJohannes Berg
When I added the monitor for outgoing frames somehow a break statement slipped in. Remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-08-14[BRIDGE]: Fix typo in net/bridge/br_stp_if.cJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>