Age | Commit message (Collapse) | Author |
|
Add newline to kernel warning message in gss_create().
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Because of workqueue delay, the put_device could be called before
device_del, so move it to del_conn.
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a delayed ACK representing two packets arrives, there are two RTT
samples available, one for each packet. The first (in order of seq
number) will be artificially long due to the delay waiting for the
second packet, the second will trigger the ACK and so will not itself
be delayed.
According to rfc1323, the SRTT used for RTO calculation should use the
first rtt, so receivers echo the timestamp from the first packet in
the delayed ack. For congestion control however, it seems measuring
delayed ack delay is not desirable as it varies independently of
congestion.
The patch below causes seq_rtt and last_ackt to be updated with any
available later packet rtts which should have less (and hopefully
zero) delack delay. The rtt value then gets passed to
ca_ops->pkts_acked().
Where TCP_CONG_RTT_STAMP was set, effort was made to supress RTTs from
within a TSO chunk (!fully_acked), using only the final ACK (which
includes any TSO delay) to generate RTTs. This patch removes these
checks so RTTs are passed for each ACK to ca_ops->pkts_acked().
For non-delay based congestion control (cubic, h-tcp), rtt is
sometimes used for rtt-scaling. In shortening the RTT, this may make
them a little less aggressive. Delay-based schemes (eg vegas, veno,
illinois) should get a cleaner, more accurate congestion signal,
particularly for small cwnds. The congestion control module can
potentially also filter out bad RTTs due to the delayed ack alarm by
looking at the associated cnt which (where delayed acking is in use)
should probably be 1 if the alarm went off or greater if the ACK was
triggered by a packet.
Signed-off-by: Gavin McCullagh <gavin.mccullagh@nuim.ie>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Brownell pointed out a regression in my recent "Fix ip command
line processing" patch. It turns out to be a fairly blatant oversight on
my part whereby ic_enable is never set, and thus autoconfiguration is
never enabled. Clearly my testing was broken :-(
The solution that I have is to set ic_enable to 1 if we hit
ip_auto_config_setup(), which basically means that autoconfiguration is
activated unless told otherwise. I then flip ic_enable to 0 if ip=off,
ip=none, ip=::::::off or ip=::::::none using ic_proto_name();
The incremental patch is below, let me know if a non-incremental version
is prepared, as I did as for the original patch to be reverted pending a
fix.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently the documentation in Documentation/nfsroot.txt was
update to note that in fact ip=off and ip=::::::off as the
latter is ignored and the default (on) is used.
This was certainly a step in the direction of reducing confusion.
But it seems to me that the code ought to be fixed up so that
ip=::::::off actually turns off ip autoconfiguration.
This patch also notes more specifically that ip=on (aka ip=::::::on)
is the default.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some users do "modprobe ip_conntrack hashsize=...". Since we have the
module aliases this loads nf_conntrack_ipv4 and nf_conntrack, the
hashsize parameter is unknown for nf_conntrack_ipv4 however and makes
it fail.
Allow to specify hashsize= for both nf_conntrack and nf_conntrack_ipv4.
Note: the nf_conntrack message in the ringbuffer will display an
incorrect hashsize since nf_conntrack is first pulled in as a
dependency and calculates the size itself, then it gets changed
through a call to nf_conntrack_set_hashsize().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch makes mac80211 warn (once) when the driver passes up a
frame in which the payload data is not aligned on a four-byte
boundary, with a long comment for people who run into the condition
and need to know what to do.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The station cleanup timer runs every ten seconds, the exact
timing is not relevant at all so it can well run together with
other things to save power.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
[ Regression added by changeset:
cd40b7d3983c708aabe3d3008ec64ffce56d33b0
[NET]: make netlink user -> kernel interface synchronious
-DaveM ]
nl_fib_input re-reuses incoming skb to send the reply. This means that this
packet will be freed twice, namely in:
- netlink_unicast_kernel
- on receive path
Use clone to send as a cure, the caller is responsible for kfree_skb on error.
Thanks to Alexey Dobryan, who originally found the problem.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When used function put_cmsg() to copy kernel information to user
application memory, if the memory length given by user application is
not enough, by the bad length calculate of msg.msg_controllen,
put_cmsg() function may cause the msg.msg_controllen to be a large
value, such as 0xFFFFFFF0, so the following put_cmsg() can also write
data to usr application memory even usr has no valid memory to store
this. This may cause usr application memory overflow.
int put_cmsg(struct msghdr * msg, int level, int type, int len, void *data)
{
struct cmsghdr __user *cm
= (__force struct cmsghdr __user *)msg->msg_control;
struct cmsghdr cmhdr;
int cmlen = CMSG_LEN(len);
~~~~~~~~~~~~~~~~~~~~~
int err;
if (MSG_CMSG_COMPAT & msg->msg_flags)
return put_cmsg_compat(msg, level, type, len, data);
if (cm==NULL || msg->msg_controllen < sizeof(*cm)) {
msg->msg_flags |= MSG_CTRUNC;
return 0; /* XXX: return error? check spec. */
}
if (msg->msg_controllen < cmlen) {
~~~~~~~~~~~~~~~~~~~~~~~~
msg->msg_flags |= MSG_CTRUNC;
cmlen = msg->msg_controllen;
}
cmhdr.cmsg_level = level;
cmhdr.cmsg_type = type;
cmhdr.cmsg_len = cmlen;
err = -EFAULT;
if (copy_to_user(cm, &cmhdr, sizeof cmhdr))
goto out;
if (copy_to_user(CMSG_DATA(cm), data, cmlen - sizeof(struct cmsghdr)))
goto out;
cmlen = CMSG_SPACE(len);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
If MSG_CTRUNC flags is set, msg->msg_controllen is less than
CMSG_SPACE(len), "msg->msg_controllen -= cmlen" will cause unsinged int
type msg->msg_controllen to be a large value.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
msg->msg_control += cmlen;
msg->msg_controllen -= cmlen;
~~~~~~~~~~~~~~~~~~~~~
err = 0;
out:
return err;
}
The same promble exists in put_cmsg_compat(). This patch can fix this
problem.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This operation helper abstracts:
skb->mac_header = skb->data;
but it was done in two more places which were actually:
skb->mac_header = skb->network_header;
and those are corrected here.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mac_header update in ipgre_recv() was incorrectly changed to
skb_reset_mac_header() when it was introduced.
Signed-off-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In several places the arguments to the xfrm_audit_start() function are
in the wrong order resulting in incorrect user information being
reported. This patch corrects this by pacing the arguments in the
correct order.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The aalgos/ealgos fields are only 32 bits wide. However, af_key tries
to test them with the expression 1 << id where id can be as large as
253. This produces different behaviour on different architectures.
The following patch explicitly checks whether ID is greater than 31
and fails the check if that's the case.
We cannot easily extend the mask to be longer than 32 bits due to
exposure to user-space. Besides, this whole interface is obsolete
anyway in favour of the xfrm_user interface which doesn't use this
bit mask in templates (well not within the kernel anyway).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In arp_process() (net/ipv4/arp.c), there is unused code: definition
and assignment of tha (target hw address ).
Signed-off-by: Mark Ryden <markryde@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix inappropriate memory freeing in case of requested rate_control_ops was
not found. In this case the list head entity is going to be accidentally
wasted.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
When using recvfrom() on a SOCK_DGRAM packet socket, I noticed that the MAC
address passed back for wireless frames was always completely wrong. The
reason for this is that the header parse function assigned to our virtual
interfaces is a function parsing an 802.11 rather than 802.3 header. This
patch fixes it by keeping the default ethernet header operations assigned.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
There is no point in staying in IEEE80211_ASSOCIATED if there is no
sta_info entry to receive frames with.
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (23 commits)
iwlwifi: fix rf_kill state inconsistent during suspend and resume
b43: Fix rfkill radio LED
bcm43xx_debugfs sscanf fix
libertas: select WIRELESS_EXT
iwlwifi3945/4965: fix rate control algo reference leak
ieee80211_rate: missed unlock
wireless/ipw2200.c: add __dev{init,exit} annotations
zd1211rw: Fix alignment problems
libertas: add Dan Williams as maintainer
sis190 endianness
ucc_geth: really fix section mismatch
pcnet_cs: add new id
ixgb: make sure jumbos stay enabled after reset
Net: ibm_newemac, remove SPIN_LOCK_UNLOCKED
net: smc911x: shut up compiler warnings
ucc_geth: minor whitespace fix
drivers/net/s2io.c section fixes
drivers/net/sis190.c section fix
hamachi endianness fixes
e100: free IRQ to remove warningwhenrebooting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
|
|
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
* git://git.linux-nfs.org/pub/linux/nfs-2.6:
MAINTAINERS: update the NFS CLIENT entry
NFS: Fix an Oops in NFS unmount
Revert "NFS: Ensure we return zero if applications attempt to write zero bytes"
SUNRPC xprtrdma: fix XDR tail buf marshalling for all ops
NFSv2/v3: Fix a memory leak when using -onolock
NFS: Fix NFS mountpoint crossing...
|
|
This patch fixes:
CHECK /home/kernel/src/net/irda/parameters.c
/home/kernel/src/net/irda/parameters.c:466:2: warning: Using plain integer as NULL pointer
/home/kernel/src/net/irda/parameters.c:520:2: warning: Using plain integer as NULL pointer
/home/kernel/src/net/irda/parameters.c:573:2: warning: Using plain integer as NULL pointer
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While testing the mcs7780 based IrDA USB dongle I've stumbled upon
memory leak in irlmp_unregister_link(). Hashbin for lsaps is created in
irlmp_register_link and should probably be freed in irlmp_unregister_link().
Signed-off-by: Hinko Kocevar <hinko.kocevar@cetrtapot.si>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At the end of partial delivery, we may have complete messages
sitting on the fragment queue. These messages are stuck there
until a new fragment arrives. This can comletely stall a
given association. When clearing partial delivery state, flush
any complete messages from the fragment queue and send them on
their way up.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bernard Pidoux reported these lockdep warnings:
[ INFO: possible irq lock inversion dependency detected ]
2.6.23.1 #1
---------------------------------------------------------
fpac/4933 just changed the state of lock:
(slock-AF_AX25){--..}, at: [<d8be3312>] ax25_disconnect+0x46/0xaf
[ax25]
but this lock was taken by another, soft-irq-safe lock in the past:
(ax25_list_lock){-+..}
and interrupts could create inverse lock ordering between them.
[...]
[ INFO: inconsistent lock state ]
2.6.23.1 #1
---------------------------------
inconsistent {in-softirq-W} -> {softirq-on-W} usage.
ax25_call/4005 [HC0[0]:SC0[0]:HE1:SE1] takes:
(slock-AF_AX25){-+..}, at: [<d8b79312>] ax25_disconnect+0x46/0xaf [ax25]
[...]
This means slock-AF_AX25 could be taken both from softirq and process
context with softirqs enabled, so it's endangered itself, but also makes
ax25_list_lock vulnerable. It was not 100% verified if the real lockup
can happen, but this fix isn't very costly and looks safe anyway.
(It was tested by Bernard with 2.6.23.9 and 2.6.24-rc5 kernels.)
Reported_by: Bernard Pidoux <pidoux@ccr.jussieu.fr>
Tested_by: Bernard Pidoux <pidoux@ccr.jussieu.fr>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_input_metrics() refers to the built-time constant TCP_RTO_MIN
regardless of configured minimum RTO with iproute2.
Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If CONFIG_NETFILTER if not selected when compile the kernel source code,
ipv6_getsockopt will returen an EINVAL error if optname is not supported by
the kernel. But if CONFIG_NETFILTER is selected, ENOPROTOOPT error will
be return.
This patch fix to always return ENOPROTOOPT error if optname argument of
ipv6_getsockopt is not supported by the kernel.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Assigning a valid random address to bridge device solves problems
when bridge device is brought up before adding real device to bridge.
When the first real device is added to the bridge, it's address
will overide the bridges random address.
Note: any device added to a bridge must already have a valid
ethernet address.
br_add_if -> br_fdb_insert -> fdb_insert -> is_valid_ether_addr
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The difference between ip=off and ip=::::::off has been a cause of much
confusion. Document how each behaves, and do not contradict ourselves by
saying that "off" is the default when in fact "any" is the default and is
descibed as being so lower in the file.
Signed-off-by: Amos Waterland <apw@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As noted by Kevin, tipc's release() does down_interruptible() and
ignores the return value. So if signal_pending() we'll end up doing
up() on a non-downed semaphore. Fix.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to avoid jiffies wraparound and its effect, special care must
be taken
when doing comparisons ...
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the IPsec protocol SPI values are written to the audit log in
network byte order which is different from almost all other values which
are recorded in host byte order. This patch corrects this inconsistency
by writing the SPI values to the audit record in host byte order.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When copying entries to user, the kernel makes two passes through the
data, first copying all the entries, then fixing up names and counters.
On the second pass it copies the kernel and match data from userspace
to the kernel again to find the corresponding structures, expecting
that kernel pointers contained in the data are still valid.
This is obviously broken, fix by avoiding the second pass completely
and fixing names and counters while dumping the ruleset, using the
kernel-internal data structures.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is a fix. It sets IPS_EXPECTED for related conntracks.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rpcrdma_convert_iovs is passed an xdr_buf representing either an RPC
request or an RPC reply. In the case of a request, several
calculations and tests involving pos are unnecessary. In the case of a
reply, several calculations and tests involving pos are incorrect (the
code tests pos against the reply xdr buf's len field, which is always
0 at the time rpcrdma_convert_iovs is executed). This change removes
the incorrect/unnecessary calculations and tests involving pos.
This fixes an observed problem when reading certain file sizes over
NFS/RDMA.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If we get an error during the actual policy lookup we don't free the
original dst while the caller expects us to always free the original
dst in case of error.
This patch fixes that.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The vlan module cleanup function starts with
vlan_netlink_fini();
vlan_ioctl_set(NULL);
The first call removes all the vlan devices and
the second one closes the vlan ioctl.
AFAIS there's a tiny race window between these two
calls - after rtnl unregistered all the vlans, but
the ioctl handler isn't set to NULL yet, user can
manage to call this ioctl and create one vlan device,
and that this function will later BUG_ON seeing
non-emply hashes.
I think, that we must first close the vlan ioctl
and only after this remove all the vlans with the
vlan_netlink_fini() call.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are some return value comments for void functions.
Fixed it.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RFC4303 introduces dummy packets with a nexthdr value of 59
to implement traffic confidentiality. Such packets need to
be dropped silently and the payload may not be attempted to
be parsed as it consists of random chunk.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RFC4303 introduces dummy packets with a nexthdr value of 59
to implement traffic confidentiality. Such packets need to
be dropped silently and the payload may not be attempted to
be parsed as it consists of random chunk.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|