| Age | Commit message (Collapse) | Author |
|---|
|
1) Remove ICMP_MIN_LENGTH, as it is unused.
2) Remove unneeded tcp_v4_send_check() declaration.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I just noticed "cat /proc/net/raw" was buggy, missing '\n' separators.
I believe this was introduced by commit 8cd850efa4948d57a2ed836911cfd1ab299e89c6
([RAW]: Cleanup IPv4 raw_seq_show.)
This trivial patch restores correct behavior, and applies to current
Linus tree (should also be applied to stable tree as well.)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Selected device feature bits can be propagated to VLAN devices, so we
can make use of TX checksum offload and TSO on VLAN-tagged packets.
However, if the physical device does not do VLAN tag insertion or
generic checksum offload then the test for TX checksum offload in
dev_queue_xmit() will see a protocol of htons(ETH_P_8021Q) and yield
false.
This splits the checksum offload test into two functions:
- can_checksum_protocol() tests a given protocol against a feature bitmask
- dev_can_checksum() first tests the skb protocol against the device
features; if that fails and the protocol is htons(ETH_P_8021Q) then
it tests the encapsulated protocol against the effective device
features for VLANs
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Right now, any time we set a primary transport we set
the changeover_active flag. As a result, we invoke SFR-CACC
even when there has been no changeover events.
Only set changeover_active, when there is a true changeover
event, i.e. we had a primary path and we are changing to
another transport.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch remove the proc fs entry which has been created if fail to
set up proc fs entry for the SCTP protocol.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ingo's system is still seeing strange behavior, and he
reports that is goes away if the rest of the deferred
accept changes are reverted too.
Therefore this reverts e4c78840284f3f51b1896cf3936d60a6033c4d2c
("[TCP]: TCP_DEFER_ACCEPT updates - dont retxmt synack") and
539fae89bebd16ebeafd57a87169bc56eb530d76 ("[TCP]: TCP_DEFER_ACCEPT
updates - defer timeout conflicts with max_thresh").
Just like the other revert, these ideas can be revisited for
2.6.27
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We've introduced extra need of compat layer for ip_tunnel_prl{}
for PRL (Potential Router List) management. Though compat_ioctl
is still missing in ipv4/ipv6, let's make the interface more
straight-forward and eliminate extra need for nasty compat layer
anyway since the interface is new for 2.6.26.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a htb_hysteresis parameter to htb_sch.ko and by sysfs magic make
it runtime adjustable via
/sys/module/sch_htb/parameters/htb_hysteresis mode 640.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Acked-by: Martin Devera <devik@cdi.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The HTB hysteresis mode reduce the CPU load, but at the
cost of scheduling accuracy.
On ADSL links (512 kbit/s upstream), this inaccuracy introduce
significant jitter, enought to disturbe VoIP. For details see my
masters thesis (http://www.adsl-optimizer.dk/thesis/), chapter 7,
section 7.3.1, pp 69-70.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Acked-by: Martin Devera <devik@cdi.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
|
|
This patch adds '\n' in debug printk (wme.c HT DEBUG)
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The patch checks interface status, if it is in IBSS_JOINED mode
show cell id it is associated with.
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
tcp: Revert 'process defer accept as established' changes.
ipv6: Fix duplicate initialization of rawv6_prot.destroy
bnx2x: Updating the Maintainer
net: Eliminate flush_scheduled_work() calls while RTNL is held.
drivers/net/r6040.c: correct bad use of round_jiffies()
fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUP
ipg: fix receivemode IPG_RM_RECEIVEMULTICAST{,HASH} in ipg_nic_set_multicast_list()
netfilter: nf_conntrack: fix ctnetlink related crash in nf_nat_setup_info()
netfilter: Make nflog quiet when no one listen in userspace.
ipv6: Fail with appropriate error code when setting not-applicable sockopt.
ipv6: Check IPV6_MULTICAST_LOOP option value.
ipv6: Check the hop limit setting in ancillary data.
ipv6 route: Fix route lifetime in netlink message.
ipv6 mcast: Check address family of gf_group in getsockopt(MS_FILTER).
dccp: Bug in initial acknowledgment number assignment
dccp ccid-3: X truncated due to type conversion
dccp ccid-3: TFRC reverse-lookup Bug-Fix
dccp ccid-2: Bug-Fix - Ack Vectors need to be ignored on request sockets
dccp: Fix sparse warnings
dccp ccid-3: Bug-Fix - Zero RTT is possible
|
|
This reverts two changesets, ec3c0982a2dd1e671bad8e9d26c28dcba0039d87
("[TCP]: TCP_DEFER_ACCEPT updates - process as established") and
the follow-on bug fix 9ae27e0adbf471c7a6b80102e38e1d5a346b3b38
("tcp: Fix slab corruption with ipv6 and tcp6fuzz").
This change causes several problems, first reported by Ingo Molnar
as a distcc-over-loopback regression where connections were getting
stuck.
Ilpo Järvinen first spotted the locking problems. The new function
added by this code, tcp_defer_accept_check(), only has the
child socket locked, yet it is modifying state of the parent
listening socket.
Fixing that is non-trivial at best, because we can't simply just grab
the parent listening socket lock at this point, because it would
create an ABBA deadlock. The normal ordering is parent listening
socket --> child socket, but this code path would require the
reverse lock ordering.
Next is a problem noticed by Vitaliy Gusev, he noted:
----------------------------------------
>--- a/net/ipv4/tcp_timer.c
>+++ b/net/ipv4/tcp_timer.c
>@@ -481,6 +481,11 @@ static void tcp_keepalive_timer (unsigned long data)
> goto death;
> }
>
>+ if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) {
>+ tcp_send_active_reset(sk, GFP_ATOMIC);
>+ goto death;
Here socket sk is not attached to listening socket's request queue. tcp_done()
will not call inet_csk_destroy_sock() (and tcp_v4_destroy_sock() which should
release this sk) as socket is not DEAD. Therefore socket sk will be lost for
freeing.
----------------------------------------
Finally, Alexey Kuznetsov argues that there might not even be any
real value or advantage to these new semantics even if we fix all
of the bugs:
----------------------------------------
Hiding from accept() sockets with only out-of-order data only
is the only thing which is impossible with old approach. Is this really
so valuable? My opinion: no, this is nothing but a new loophole
to consume memory without control.
----------------------------------------
So revert this thing for now.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In changeset 22dd485022f3d0b162ceb5e67d85de7c3806aa20
("raw: Raw socket leak.") code was added so that we
flush pending frames on raw sockets to avoid leaks.
The ipv4 part was fine, but the ipv6 part was not
done correctly. Unlike the ipv4 side, the ipv6 code
already has a .destroy method for rawv6_prot.
So now there were two assignments to this member, and
what the compiler does is use the last one, effectively
making the ipv6 parts of that changeset a NOP.
Fix this by removing the:
.destroy = inet6_destroy_sock,
line, and adding an inet6_destroy_sock() call to the
end of raw6_destroy().
Noticed by Al Viro.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-fix
|
|
|
|
When creation of a new conntrack entry in ctnetlink fails after having
set up the NAT mappings, the conntrack has an extension area allocated
that is not getting properly destroyed when freeing the conntrack again.
This means the NAT extension is still in the bysource hash, causing a
crash when walking over the hash chain the next time:
BUG: unable to handle kernel paging request at 00120fbd
IP: [<c03d394b>] nf_nat_setup_info+0x221/0x58a
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Pid: 2795, comm: conntrackd Not tainted (2.6.26-rc5 #1)
EIP: 0060:[<c03d394b>] EFLAGS: 00010206 CPU: 1
EIP is at nf_nat_setup_info+0x221/0x58a
EAX: 00120fbd EBX: 00120fbd ECX: 00000001 EDX: 00000000
ESI: 0000019e EDI: e853bbb4 EBP: e853bbc8 ESP: e853bb78
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process conntrackd (pid: 2795, ti=e853a000 task=f7de10f0 task.ti=e853a000)
Stack: 00000000 e853bc2c e85672ec 00000008 c0561084 63c1db4a 00000000 00000000
00000000 0002e109 61d2b1c3 00000000 00000000 00000000 01114e22 61d2b1c3
00000000 00000000 f7444674 e853bc04 00000008 c038e728 0000000a f7444674
Call Trace:
[<c038e728>] nla_parse+0x5c/0xb0
[<c0397c1b>] ctnetlink_change_status+0x190/0x1c6
[<c0397eec>] ctnetlink_new_conntrack+0x189/0x61f
[<c0119aee>] update_curr+0x3d/0x52
[<c03902d1>] nfnetlink_rcv_msg+0xc1/0xd8
[<c0390228>] nfnetlink_rcv_msg+0x18/0xd8
[<c0390210>] nfnetlink_rcv_msg+0x0/0xd8
[<c038d2ce>] netlink_rcv_skb+0x2d/0x71
[<c0390205>] nfnetlink_rcv+0x19/0x24
[<c038d0f5>] netlink_unicast+0x1b3/0x216
...
Move invocation of the extension destructors to nf_conntrack_free()
to fix this problem.
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=10875
Reported-and-Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The message "nf_log_packet: can't log since no backend logging module loaded
in! Please either load one, or disable logging explicitly" was displayed for
each logged packet when no userspace application is listening to nflog events.
The message seems to warn for a problem with a kernel module missing but as
said before this is not the case. I thus propose to suppress the message (I
don't see any reason to flood the log because a user application has crashed.)
Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPV6_MULTICAST_HOPS, for example, is not valid for stream sockets.
Since they are virtually unavailable for stream sockets,
we should return ENOPROTOOPT instead of EINVAL.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
Only 0 and 1 are valid for IPV6_MULTICAST_LOOP socket option,
and we should return an error of EINVAL otherwise, per RFC3493.
Based on patch from Shan Wei <shanwei@cn.fujitsu.com>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
When specifing the outgoing hop limit as ancillary data for sendmsg(),
the kernel doesn't check the integer hop limit value as specified in
[RFC-3542] section 6.3.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
1) We may have route lifetime larger than INT_MAX.
In that case we had wired value in lifetime.
Use INT_MAX if lifetime does not fit in s32.
2) Lifetime is valid iif RTF_EXPIRES is set.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
net: Fix routing tables with id > 255 for legacy software
sky2: Hold RTNL while calling dev_close()
s2io iomem annotations
atl1: fix suspend regression
qeth: start dev queue after tx drop error
qeth: Prepare-function to call s390dbf was wrong
qeth: reduce number of kernel messages
qeth: Use ccw_device_get_id().
qeth: layer 3 Oops in ip event handler
virtio: use callback on empty in virtio_net
virtio: virtio_net free transmit skbs in a timer
virtio: Fix typo in virtio_net_hdr comments
virtio_net: Fix skb->csum_start computation
ehea: set mac address fix
sfc: Recover from RX queue flush failure
add missing lance_* exports
ixgbe: fix typo
forcedeth: msi interrupts
ipsec: pfkey should ignore events when no listeners
pppoe: Unshare skb before anything else
...
|
|
Step 8.5 in RFC 4340 says for the newly cloned socket
Initialize S.GAR := S.ISS,
but what in fact the code (minisocks.c) does is
Initialize S.GAR := S.ISR,
which is wrong (typo?) -- fixed by the patch.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
This fixes a bug in computing the inter-packet-interval t_ipi = s/X:
scaled_div32(a, b) uses u32 for b, but in "scaled_div32(s, X)" the type of the
sending rate `X' is u64. Since X is scaled by 2^6, this truncates rates greater
than 2^26 Bps (~537 Mbps).
Using full 64-bit division now.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
This fixes a bug in the reverse lookup of p: given a value f(p), instead of p,
the function returned the smallest tabulated value f(p).
The smallest tabulated value of
10^6 * f(p) = sqrt(2*p/3) + 12 * sqrt(3*p/8) * (32 * p^3 + p)
for p=0.0001 is 8172.
Since this value is scaled by 10^6, the outcome of this bug is that a loss
of 8172/10^6 = 0.8172% was reported whenever the input was below the table
resolution of 0.01%.
This means that the value was over 80 times too high, resulting in large spikes
of the initial loss interval, thus unnecessarily reducing the throughput.
Also corrected the printk format (%u for u32).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
This fixes an oversight from an earlier patch, ensuring that Ack Vectors
are not processed on request sockets.
The issue is that Ack Vectors must not be parsed on request sockets, since
the Ack Vector feature depends on the selection of the (TX) CCID. During the
initial handshake the CCIDs are undefined, and so RFC 4340, 10.3 applies:
"Using CCID-specific options and feature options during a negotiation
for the corresponding CCID feature is NOT RECOMMENDED [...]"
And it is not even possible: when the server receives the Request from the
client, the CCID and Ack vector features are undefined; when the Ack finalising
the 3-way hanshake arrives, the request socket has not been cloned yet into a
full socket. (This order is necessary, since otherwise the newly created socket
would have to be destroyed whenever an option error occurred - a malicious
hacker could simply send garbage options and exploit this.)
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
This patch fixes the following sparse warnings:
* nested min(max()) expression:
net/dccp/ccids/ccid3.c:91:21: warning: symbol '__x' shadows an earlier one
net/dccp/ccids/ccid3.c:91:21: warning: symbol '__y' shadows an earlier one
* Declaration of function prototypes in .c instead of .h file, resulting in
"should it be static?" warnings.
* Declared "struct dccpw" static (local to dccp_probe).
* Disabled dccp_delayed_ack() - not fully removed due to RFC 4340, 11.3
("Receivers SHOULD implement delayed acknowledgement timers ...").
* Used a different local variable name to avoid
net/dccp/ackvec.c:293:13: warning: symbol 'state' shadows an earlier one
net/dccp/ackvec.c:238:33: originally declared here
* Removed unused functions `dccp_ackvector_print' and `dccp_ackvec_print'.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
In commit $(825de27d9e40b3117b29a79d412b7a4b78c5d815) (from 27th May, commit
message `dccp ccid-3: Fix "t_ipi explosion" bug'), the CCID-3 window counter
computation was fixed to cope with RTTs < 4 microseconds.
Such RTTs can be found e.g. when running CCID-3 over loopback. The fix removed
a check against RTT < 4, but introduced a divide-by-zero bug.
All steady-state RTTs in DCCP are filtered using dccp_sample_rtt(), which
ensures non-zero samples. However, a zero RTT is possible on initialisation,
when there is no RTT sample from the Request/Response exchange.
The fix is to use the fallback-RTT from RFC 4340, 3.4.
This is also better than just fixing update_win_count() since it allows other
parts of the code to always assume that the RTT is non-zero during the time
that the CCID is used.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
|
|
Most legacy software do not like tables > 255 as rtm_table is u8
so tb_id is sent &0xff and it is possible to mismatch for example
table 510 with table 254 (main).
This patch introduces RT_TABLE_COMPAT=252 so the code uses it if
tb_id > 255. It makes such old applications happy, new
ones are still able to use RTA_TABLE to get a proper table id.
Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When pfkey has no km listeners, it still does a lot of work
before finding out there aint nobody out there.
If a tree falls in a forest and no one is around to hear it, does it make
a sound? In this case it makes a lot of noise:
With this short-circuit adding 10s of thousands of SAs using
netlink improves performance by ~10%.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Wei Yongjun noticed that we may call reqsk_free on request sock objects where
the opt fields may not be initialized, fix it by introducing inet_reqsk_alloc
where we initialize ->opt to NULL and set ->pktopts to NULL in
inet6_reqsk_alloc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bindv6only is tuned via sysctl. It is already on a struct net
and per-net sysctls allow for its modification (ipv6_sysctl_net_init).
Despite this the value configured in the init net is used for the
rest of them.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a check to the set_channel flow. When attempting to change
the channel while in IBSS mode, and the new channel does not support IBSS
mode, the flow return with an error value with no consequences on the
mac80211 and driver state.
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Sufficient scans (at least 2 or 3) should have been done within 7
seconds to find an existing IBSS to join. This should improve IBSS
creation latency; and since IBSS merging is still in effect, shouldn't
have detrimental effects on eventual IBSS convergence.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch fixes the issue of slow reconnection to an IBSS cell after
disconnection from it. Now the interface's bssid is reset upon ifdown.
ieee80211_sta_find_ibss:
if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 &&
(bss = ieee80211_rx_bss_get(dev, bssid,
local->hw.conf.channel->center_freq,
ifsta->ssid, ifsta->ssid_len)))
Note:
In general disconnection is still not handled properly in mac80211
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Otherwise userspace has no idea the IBSS creation succeeded.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
- Don't trust a length which is greater than the working buffer.
An invalid length could cause overflow when calculating buffer size
for decoding oid.
- An oid length of zero is invalid and allows for an off-by-one error when
decoding oid because the first subid actually encodes first 2 subids.
- A primitive encoding may not have an indefinite length.
Thanks to Wei Wang from McAfee for report.
Cc: Steven French <sfrench@us.ibm.com>
Cc: stable@kernel.org
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
l2tp: Fix possible oops if transmitting or receiving when tunnel goes down
tcp: Fix for race due to temporary drop of the socket lock in skb_splice_bits.
tcp: Increment OUTRSTS in tcp_send_active_reset()
raw: Raw socket leak.
lt2p: Fix possible WARN_ON from socket code when UDP socket is closed
USB ID for Philips CPWUA054/00 Wireless USB Adapter 11g
ssb: Fix context assertion in ssb_pcicore_dev_irqvecs_enable
libertas: fix command size for CMD_802_11_SUBSCRIBE_EVENT
ipw2200: expire and use oldest BSS on adhoc create
airo warning fix
b43legacy: Fix controller restart crash
sctp: Fix ECN markings for IPv6
sctp: Flush the queue only once during fast retransmit.
sctp: Start T3-RTX timer when fast retransmitting lowest TSN
sctp: Correctly implement Fast Recovery cwnd manipulations.
sctp: Move sctp_v4_dst_saddr out of loop
sctp: retran_path update bug fix
tcp: fix skb vs fack_count out-of-sync condition
sunhme: Cleanup use of deprecated calls to save_and_cli and restore_flags.
xfrm: xfrm_algo: correct usage of RIPEMD-160
...
|
|
skb_splice_bits temporary drops the socket lock while iterating over
the socket queue in order to break a reverse locking condition which
happens with sendfile. This, however, opens a window of opportunity
for tcp_collapse() to aggregate skbs and thus potentially free the
current skb used in skb_splice_bits and tcp_read_sock.
This patch fixes the problem by (re-)getting the same "logical skb"
after the lock has been temporary dropped.
Based on idea and initial patch from Evgeniy Polyakov.
Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TCP "resets sent" counter is not incremented when a TCP Reset is
sent via tcp_send_active_reset().
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The program below just leaks the raw kernel socket
int main() {
int fd = socket(PF_INET, SOCK_RAW, IPPROTO_UDP);
struct sockaddr_in addr;
memset(&addr, 0, sizeof(addr));
inet_aton("127.0.0.1", &addr.sin_addr);
addr.sin_family = AF_INET;
addr.sin_port = htons(2048);
sendto(fd, "a", 1, MSG_MORE, &addr, sizeof(addr));
return 0;
}
Corked packet is allocated via sock_wmalloc which holds the owner socket,
so one should uncork it and flush all pending data on close. Do this in the
same way as in UDP.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit e9df2e8fd8fbc95c57dbd1d33dada66c4627b44c ("[IPV6]: Use
appropriate sock tclass setting for routing lookup.") also changed the
way that ECN capable transports mark this capability in IPv6. As a
result, SCTP was not marking ECN capablity because the traffic class
was never set. This patch brings back the markings for IPv6 traffic.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When fast retransmit is triggered by a sack, we should flush the queue
only once so that only 1 retransmit happens. Also, since we could
potentially have non-fast-rtx chunks on the retransmit queue, we need
make sure any chunks eligable for fast retransmit are sent first
during fast retransmission.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Tested-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we are trying to fast retransmit the lowest outstanding TSN, we
need to restart the T3-RTX timer, so that subsequent timeouts will
correctly tag all the packets necessary for retransmissions.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Tested-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Correctly keep track of Fast Recovery state and do not reduce
congestion window multiple times during sucht state.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Tested-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's no need to execute sctp_v4_dst_saddr() for each
iteration, just move it out of loop.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the current retran_path is the only active one, it should
update it to the the next inactive one.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
