| Age | Commit message (Collapse) | Author |
|---|
|
Dynamic ftrace support for s390.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The only references in the kernel to the .text.sched section are in
recordmcount.pl. Since the code it has is intended to be example code
it should refer to real kernel sections. So change it to .sched.text
instead.
[ Impact: consistency in comments ]
Signed-off-by: Tim Abbott <tabbott@mit.edu>
LKML-Reference: <1241136371-10768-1-git-send-email-tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Impact: fix failure of dynamic function tracer selftest
In a course of development, a developer does several makes on their
kernel. Sometimes, the make might do something abnormal. In the
case of running the recordmcount.pl script on an object twice,
the script will duplicate all the calls to mcount in the __mcount_loc
section.
On boot up, the dynamic function tracer is careful when it modifies
code, and performs several consistency checks. One is to not modify
the call site if it is not what it expects it to be. If a function
call site is listed twice, the first entry will convert the site
to a nop, and the second will fail because it expected to see a
call to mcount, but instead it sees a nop. Thus, the function tracer
is disabled.
Eric Sesterhenn reported seeing:
[ 1.055440] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 1.055568] ftrace: allocating 29418 entries in 116 pages
[ 1.061000] ------------[ cut here ]------------
[ 1.061000] WARNING: at kernel/trace/ftrace.c:441
[...]
[ 1.060000] ---[ end trace 4eaa2a86a8e2da23 ]---
[ 1.060000] ftrace failed to modify [<c0118072>] check_corruption+0x3/0x2d
[ 1.060000] actual: 0f:1f:44:00:00
This warning shows that check_corruption+0x3 already had a nop in
its place (0x0f1f440000). After compiling another kernel the problem
went away.
Later Eric Paris notice the same type of issue. Luckily, he saved
the vmlinux file that caused it. In the file we found a bunch of
duplicate mcount call site records, which lead us to the script.
Perhaps this problem only happens to people named Eric.
This patch changes the script to test if the __mcount_loc already
exists in the object file, and if it does, it will print out
an error message and kill the compile.
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add recordmcount for ia64.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
In IA64, a function pointer isn't a 'unsigned long' but a
'struct {unsigned long ip, unsigned long gp}'. MCOUNT_ADDR is determined
at link time not compile time, so explictly ignore kernel/trace/ftrace.o
in recordmcount.pl.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
In IA64, module build and kernel build use different option.
Make recordmcount.pl differentiate the two cases.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: let the function-graph-tracer be aware of the irq entrypoints
Add a new .irqentry.text section to store the irq entrypoints functions
inside the same section. This way, the tracer will be able to signal
an interrupts triggering on output by recognizing these entrypoints.
Also, make this section recordable for dynamic tracing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: widen the scope of recordmcount.pl
Besides .text section, there are three .text sections that won't
be freed after kernel booting. They are: .sched.text, .spinlock.text
and .kprobes.text, which contain functions we can trace. But the last
section ".kprobes.text" is particular, which has been marked as "notrace",
we ignore it. Thus we add other two sections.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: extend scripts/recordmcount.pl to ARM
Arm uses %progbits instead of @progbits and requires only 4 byte alignment.
[ Thanks to Sam Ravnborg for mentioning that ARM uses %progbits ]
Signed-off-by: Jim Radford <radford@galvanix.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: extend scripts/recordmcount.pl with default alignment for SH
Set $alignment=2 for the sh architecture so that a ".align 2" directive
will be emitted for all __mcount_loc sections. Fix a whitspace error
while I'm here (converted spaces to tabs).
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup of recordmcount.pl
Now that more architectures are being ported to the MCOUNT_RECORD
method, there is no reason to have each declare their own arch
specific variable if most of them share the same value. This patch
creates a set of default values for the arch specific variables
based off of i386.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: Add PowerPC port to recordmcount.pl script
This patch updates the recordmcount.pl script to process
PowerPC.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
First cut at dynamic ftrace support.
[
Steven Rostedt - only updated the recordmcount.pl file.
There are updates for PowerPC that will conflict with this,
and we need to base off of these changes.
]
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: add alignment option for recordmcount.pl script
Align the __mcount_loc sections so that architectures with strict
alignment requirements need not worry about performing unaligned
accesses.
This fixes an issue where I was seeing unaligned accesses, which are not
supported on our architecture (the results of an unaligned access are
undefined).
Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The text section stays in memory without ever leaving. With the exception
of modules, but modules know how to handle that case. With the dynamic
ftrace tracer, we need to make sure that it does not try to modify code
that no longer exists. The only safe section is .text.
This patch changes the recordmcount script to only record the mcount calls
in the .text sections.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The recordmcount script requires that the actual arch is passed in.
This works well when ARCH=i386 or ARCH=x86_64 but does not handle the
case of ARCH=x86.
This patch adds a parameter to the function to pass in the number of
bits of the architecture. So that it can determine if x86 should be
run for x86_64 or i386 archs.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The warning messages about old objcopy and local functions spam the
user quite drastically. Remove the warning until we can find a nicer
way of tell the user to upgrade their objcopy.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The --globalize-symbols option came out in objcopy version 2.17.
If the kernel is being compiled on a system with a lower version of
objcopy, then we can not use the globalize / localize trick to
link to symbols pointing to local functions.
This patch tests the version of objcopy and will only use the trick
if the version is greater than or equal to 2.17. Otherwise, if an
object has only local functions within a section, it will give a
nice warning and recommend the user to upgrade their objcopy.
Leaving the symbols unrecorded is not that big of a deal, since the
mcount record method changes the actual mcount code to be a simple
"ret" without recording registers or anything.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
During tests and checks, I've discovered that there were failures to
convert mcount callers into nops. Looking deeper into these failures,
code that was attempted to be changed was not an mcount caller.
The current code only updates if the code being changed is what it expects,
but I still investigate any time there is a failure.
What was happening is that a weak symbol was being used as a reference
for other mcount callers. That weak symbol was also referenced elsewhere
so the offsets were using the strong symbol and not the function symbol
that it was referenced from.
This patch changes the setting up of the mcount_loc section to search
for a global function that is not weak. It will pick a local over a weak
but if only a weak is found in a section, a warning is printed and the
mcount location is not recorded (just to be safe).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
I'm trying to keep all the arch changes in recordmcount.pl in one place.
I moved your code into that area, by adding the flags to the commands
that were passed in.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
hack around:
ld: Relocatable linking with relocations from format elf32-i386 (init/.tmp_gl_calibrate.o) to format elf64-x86-64 (init/.tmp_mx_calibrate.o) i CC arch/x86/mm/extable.o
objcopy: 'init/.tmp_mx_calibrate.o': No such file
rm: cannot remove `init/.tmp_mx_calibrate.o': No such file or directory
ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/extable.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_extable.o) is not supported
mv: cannot stat `arch/x86/mm/.tmp_mx_extable.o': No such file or directory
ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/fault.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_fault.o) is not supported
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch creates a section in the kernel called "__mcount_loc".
This will hold a list of pointers to the mcount relocation for
each call site of mcount.
For example:
objdump -dr init/main.o
[...]
Disassembly of section .text:
0000000000000000 <do_one_initcall>:
0: 55 push %rbp
[...]
000000000000017b <init_post>:
17b: 55 push %rbp
17c: 48 89 e5 mov %rsp,%rbp
17f: 53 push %rbx
180: 48 83 ec 08 sub $0x8,%rsp
184: e8 00 00 00 00 callq 189 <init_post+0xe>
185: R_X86_64_PC32 mcount+0xfffffffffffffffc
[...]
We will add a section to point to each function call.
.section __mcount_loc,"a",@progbits
[...]
.quad .text + 0x185
[...]
The offset to of the mcount call site in init_post is an offset from
the start of the section, and not the start of the function init_post.
The mcount relocation is at the call site 0x185 from the start of the
.text section.
.text + 0x185 == init_post + 0xa
We need a way to add this __mcount_loc section in a way that we do not
lose the relocations after final link. The .text section here will
be attached to all other .text sections after final link and the
offsets will be meaningless. We need to keep track of where these
.text sections are.
To do this, we use the start of the first function in the section.
do_one_initcall. We can make a tmp.s file with this function as a reference
to the start of the .text section.
.section __mcount_loc,"a",@progbits
[...]
.quad do_one_initcall + 0x185
[...]
Then we can compile the tmp.s into a tmp.o
gcc -c tmp.s -o tmp.o
And link it into back into main.o.
ld -r main.o tmp.o -o tmp_main.o
mv tmp_main.o main.o
But we have a problem. What happens if the first function in a section
is not exported, and is a static function. The linker will not let
the tmp.o use it. This case exists in main.o as well.
Disassembly of section .init.text:
0000000000000000 <set_reset_devices>:
0: 55 push %rbp
1: 48 89 e5 mov %rsp,%rbp
4: e8 00 00 00 00 callq 9 <set_reset_devices+0x9>
5: R_X86_64_PC32 mcount+0xfffffffffffffffc
The first function in .init.text is a static function.
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
The lowercase 't' means that set_reset_devices is local and is not exported.
If we simply try to link the tmp.o with the set_reset_devices we end
up with two symbols: one local and one global.
.section __mcount_loc,"a",@progbits
.quad set_reset_devices + 0x10
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
U set_reset_devices
We still have an undefined reference to set_reset_devices, and if we try
to compile the kernel, we will end up with an undefined reference to
set_reset_devices, or even worst, it could be exported someplace else,
and then we will have a reference to the wrong location.
To handle this case, we make an intermediate step using objcopy.
We convert set_reset_devices into a global exported symbol before linking
it with tmp.o and set it back afterwards.
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
Now we have a section in main.o called __mcount_loc that we can place
somewhere in the kernel using vmlinux.ld.S and access it to convert
all these locations that call mcount into nops before starting SMP
and thus, eliminating the need to do this with kstop_machine.
Note, A well documented perl script (scripts/recordmcount.pl) is used
to do all this in one location.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
