| Age | Commit message (Collapse) | Author |
|---|
|
This patch fixes two bugs in policydb_destroy. Two list pointers
(policydb.ocontexts[i] and policydb.genfs) were not being reset to NULL when
the lists they pointed to were being freed. This caused a problem when the
initial policy load failed, as the policydb being destroyed was not a
temporary new policydb that was thrown away, but rather was the global
(active) policydb. Consequently, later functions, particularly
sys_bind->selinux_socket_bind->security_node_sid and
do_rw_proc->selinux_sysctl->selinux_proc_get_sid->security_genfs_sid tried
to dereference memory that had previously been freed.
Signed-off-by: Chad Sellers <csellers@tresys.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Currently when an IPSec policy rule doesn't specify a security
context, it is assumed to be "unlabeled" by SELinux, and so
the IPSec policy rule fails to match to a flow that it would
otherwise match to, unless one has explicitly added an SELinux
policy rule allowing the flow to "polmatch" to the "unlabeled"
IPSec policy rules. In the absence of such an explicitly added
SELinux policy rule, the IPSec policy rule fails to match and
so the packet(s) flow in clear text without the otherwise applicable
xfrm(s) applied.
The above SELinux behavior violates the SELinux security notion of
"deny by default" which should actually translate to "encrypt by
default" in the above case.
This was first reported by Evgeniy Polyakov and the way James Morris
was seeing the problem was when connecting via IPsec to a
confined service on an SELinux box (vsftpd), which did not have the
appropriate SELinux policy permissions to send packets via IPsec.
With this patch applied, SELinux "polmatching" of flows Vs. IPSec
policy rules will only come into play when there's a explicit context
specified for the IPSec policy rule (which also means there's corresponding
SELinux policy allowing appropriate domains/flows to polmatch to this context).
Secondly, when a security module is loaded (in this case, SELinux), the
security_xfrm_policy_lookup() hook can return errors other than access denied,
such as -EINVAL. We were not handling that correctly, and in fact
inverting the return logic and propagating a false "ok" back up to
xfrm_lookup(), which then allowed packets to pass as if they were not
associated with an xfrm policy.
The solution for this is to first ensure that errno values are
correctly propagated all the way back up through the various call chains
from security_xfrm_policy_lookup(), and handled correctly.
Then, flow_cache_lookup() is modified, so that if the policy resolver
fails (typically a permission denied via the security module), the flow
cache entry is killed rather than having a null policy assigned (which
indicates that the packet can pass freely). This also forces any future
lookups for the same flow to consult the security module (e.g. SELinux)
for current security policy (rather than, say, caching the error on the
flow cache entry).
This patch: Fix the selinux side of things.
This makes sure SELinux polmatching of flow contexts to IPSec policy
rules comes into play only when an explicit context is associated
with the IPSec policy rule.
Also, this no longer defaults the context of a socket policy to
the context of the socket since the "no explicit context" case
is now handled properly.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
This patch changes NetLabel to use SECINITSID_UNLABLELED as it's source of
SELinux type information when generating a NetLabel context.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Testing revealed a problem with the NetLabel cache where a cached entry could
be freed while in use by the LSM layer causing an oops and other problems.
This patch fixes that problem by introducing a reference counter to the cache
entry so that it is only freed when it is no longer in use.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
This is mostly included for parity with dec_nlink(), where we will have some
more hooks. This one should stay pretty darn straightforward for now.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Accepted connections of types other than AF_INET, AF_INET6, AF_UNIX won't
have an appropriate label derived from the peer, so don't use it.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Allows commas to be embedded into context mount options (i.e. "-o
context=some_selinux_context_t"), to better support multiple categories,
which are separated by commas and confuse mount.
For example, with the current code:
mount -t iso9660 /dev/cdrom /media/cdrom -o \
ro,context=system_u:object_r:iso9660_t:s0:c1,c3,c4,exec
The context option that will be interpreted by SELinux is
context=system_u:object_r:iso9660_t:s0:c1
instead of
context=system_u:object_r:iso9660_t:s0:c1,c3,c4
The options that will be passed on to the file system will be
ro,c3,c4,exec.
The proposed solution is to allow/require the SELinux context option
specified to mount to use quotes when the context contains a comma.
This patch modifies the option parsing in parse_opts(), contained in
mount.c, to take options after finding a comma only if it hasn't seen a
quote or if the quotes are matched. It also introduces a new function that
will strip the quotes from the context option prior to translation. The
quotes are replaced after the translation is completed to insure that in
the event the raw context contains commas the kernel will be able to
interpret the correct context.
Signed-off-by: Cory Olmo <colmo@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.
Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Take tty_mutex when accessing ->signal->tty in selinux code. Noted by Alan
Cox. Longer term, we are looking at refactoring the code to provide better
encapsulation of the tty layer, but this is a simple fix that addresses the
immediate bug.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch converts the semaphore in the superblock security struct to a
mutex. No locking changes or other code changes are done.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch converts the remaining isec->sem into a mutex. Very similar
locking is provided as before only in the faster smaller mutex rather than a
semaphore. An out_unlock path is introduced rather than the conditional
unlocking found in the original code.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
inode_security_set_sid is only called by security_inode_init_security, which
is called when a new file is being created and needs to have its incore
security state initialized and its security xattr set. This helper used to be
called in other places in the past, but now only has the one. So this patch
rolls inode_security_set_sid directly back into security_inode_init_security.
There also is no need to hold the isec->sem while doing this, as the inode is
not available to other threads at this point in time.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Introduces support for policy version 21. This version of the binary
kernel policy allows for defining range transitions on security classes
other than the process security class. As always, backwards compatibility
for older formats is retained. The security class is read in as specified
when using the new format, while the "process" security class is assumed
when using an older policy format.
Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Enable configuration of SELinux maximum supported policy version to support
legacy userland (init) that does not gracefully handle kernels that support
newer policy versions two or more beyond the installed policy, as in FC3
and FC4.
[bunk@stusta.de: improve Kconfig help text]
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Replace ctxid with sid in selinux_audit_rule_match interface for
consistency with other interfaces.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Rename selinux_ctxid_to_string to selinux_sid_to_string to be
consistent with other interfaces.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Eliminate selinux_task_ctxid since it duplicates selinux_task_get_sid.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Change NetLabel to use the 'recvfrom' socket permission and the
SECINITSID_NETMSG SELinux SID as the NetLabel base SID for incoming packets.
This patch effectively makes the old, and currently unused, SELinux NETMSG
permissions NetLabel permissions.
Signed-of-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a problem where NetLabel would always set the value of
sk_security_struct->peer_sid in selinux_netlbl_sock_graft() to the context of
the socket, causing problems when users would query the context of the
connection. This patch fixes this so that the value in
sk_security_struct->peer_sid is only set when the connection is NetLabel based,
otherwise the value is untouched.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The following fixes a bug where random mem is being tampered with in the
non-mls case; encountered by Jashua Brindle on a gentoo box.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Add some missing include files to the NetLabel related header files.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Uninline the selinux_netlbl_inode_permission() at the request of
Andrew Morton.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rewrite ebitmap_import() so it is a bit cleaner and easier to read.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix some incorrect comments.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a problem where the NetLabel specific fields of the sk_security_struct
structure were not being initialized early enough in some cases.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch makes four needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add NetLabel support to the SELinux LSM and modify the
socket_post_create() LSM hook to return an error code. The most
significant part of this patch is the addition of NetLabel hooks into
the following SELinux LSM hooks:
* selinux_file_permission()
* selinux_socket_sendmsg()
* selinux_socket_post_create()
* selinux_socket_sock_rcv_skb()
* selinux_socket_getpeersec_stream()
* selinux_socket_getpeersec_dgram()
* selinux_sock_graft()
* selinux_inet_conn_request()
The basic reasoning behind this patch is that outgoing packets are
"NetLabel'd" by labeling their socket and the NetLabel security
attributes are checked via the additional hook in
selinux_socket_sock_rcv_skb(). NetLabel itself is only a labeling
mechanism, similar to filesystem extended attributes, it is up to the
SELinux enforcement mechanism to perform the actual access checks.
In addition to the changes outlined above this patch also includes
some changes to the extended bitmap (ebitmap) and multi-level security
(mls) code to import and export SELinux TE/MLS attributes into and out
of NetLabel.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The following patch will fix the build problem (encountered by Andrew
Morton) when SECURITY_NETWORK_XFRM is not enabled.
As compared to git-net-selinux_xfrm_decode_session-build-fix.patch in
-mm, this patch sets the return parameter sid to SECSID_NULL in
selinux_xfrm_decode_session() and handles this value in the caller
selinux_inet_conn_request() appropriately.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This automatically labels the TCP, Unix stream, and dccp child sockets
as well as openreqs to be at the same MLS level as the peer. This will
result in the selection of appropriately labeled IPSec Security
Associations.
This also uses the sock's sid (as opposed to the isec sid) in SELinux
enforcement of secmark in rcv_skb and postroute_last hooks.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This defaults the label of socket-specific IPSec policies to be the
same as the socket they are set on.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This labels the flows that could utilize IPSec xfrms at the points the
flows are defined so that IPSec policy and SAs at the right label can
be used.
The following protos are currently not handled, but they should
continue to be able to use single-labeled IPSec like they currently
do.
ipmr
ip_gre
ipip
igmp
sit
sctp
ip6_tunnel (IPv6 over IPv6 tunnel device)
decnet
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This implements a seemless mechanism for xfrm policy selection and
state matching based on the flow sid. This also includes the necessary
SELinux enforcement pieces.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds security for IP sockets at the sock level. Security at the
sock level is needed to enforce the SELinux security policy for
security associations even when a sock is orphaned (such as in the TCP
LAST_ACK state).
This will also be used to enforce SELinux controls over data arriving
at or leaving a child socket while it's still waiting to be accepted.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This defines a routine that combines the Type Enforcement portion of
one sid with the MLS portion from the other sid to arrive at a new
sid. This would be used to define a sid for a security association
that is to be negotiated by IKE as well as for determing the sid for
open requests and connection-oriented child sockets.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current approach to labeling Security Associations for SELinux
purposes uses a one-to-one mapping between xfrm policy rules and
security associations.
This doesn't address the needs of real world MLS (Multi-level System,
traditional Bell-LaPadula) environments where a single xfrm policy
rule (pertaining to a range, classified to secret for example) might
need to map to multiple Security Associations (one each for
classified, secret, top secret and all the compartments applicable to
these security levels).
This patch set addresses the above problem by allowing for the mapping
of a single xfrm policy rule to multiple security associations, with
each association used in the security context it is defined for. It
also includes the security context to be used in IKE negotiation in
the acquire messages sent to the IKE daemon so that a unique SA can be
negotiated for each unique security context. A couple of bug fixes are
also included; checks to make sure the SAs used by a packet match
policy (security context-wise) on the inbound and also that the bundle
used for the outbound matches the security context of the flow. This
patch set also makes the use of the SELinux sid in flow cache lookups
seemless by including the sid in the flow key itself. Also, open
requests as well as connection-oriented child sockets are labeled
automatically to be at the same level as the peer to allow for use of
appropriately labeled IPSec associations.
Description of changes:
A "sid" member has been added to the flow cache key resulting in the
sid being available at all needed locations and the flow cache lookups
automatically using the sid. The flow sid is derived from the socket
on the outbound and the SAs (unlabeled where an SA was not used) on
the inbound.
Outbound case:
1. Find policy for the socket.
2. OLD: Find an SA that matches the policy.
NEW: Find an SA that matches BOTH the policy and the flow/socket.
This is necessary since not every SA that matches the policy
can be used for the flow/socket. Consider policy range Secret-TS,
and SAs each for Secret and TS. We don't want a TS socket to
use the Secret SA. Hence the additional check for the SA Vs. flow/socket.
3. NEW: When looking thru bundles for a policy, make sure the
flow/socket can use the bundle. If a bundle is not found,
create one, calling for IKE if necessary. If using IKE,
include the security context in the acquire message to the IKE
daemon.
Inbound case:
1. OLD: Find policy for the socket.
NEW: Find policy for the incoming packet based on the sid of the
SA(s) it used or the unlabeled sid if no SAs were
used. (Consider a case where a socket is "authorized" for two
policies (unclassified-confidential, secret-top_secret). If the
packet has come in using a secret SA, we really ought to be
using the latter policy (secret-top_secret).)
2. OLD: BUG: No check to see if the SAs used by the packet agree with
the policy sec_ctx-wise.
(It was indicated in selinux_xfrm_sock_rcv_skb() that
this was being accomplished by
(x->id.spi == tmpl->id.spi || !tmpl->id.spi) in xfrm_state_ok,
but it turns out tmpl->id.spi
would normally be zero (unless xfrm policy rules specify one
at the template level, which they usually don't).
NEW: The socket is checked for access to the SAs used (based on the
sid of the SAs) in selinux_xfrm_sock_rcv_skb().
Forward case:
This would be Step 1 from the Inbound case, followed by Steps 2 and 3
from the Outbound case.
Outstanding items/issues:
- Timewait acknowledgements and such are generated in the
current/upstream implementation using a NULL socket resulting in the
any_socket sid (SYSTEM_HIGH) to be used. This problem is not addressed
by this patch set.
This patch: Add new flask definitions to SELinux
Adds a new avperm "polmatch" to arbitrate flow/state access to a xfrm
policy rule.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
From: Catherine Zhang <cxzhang@watson.ibm.com>
This patch implements a cleaner fix for the memory leak problem of the
original unix datagram getpeersec patch. Instead of creating a
security context each time a unix datagram is sent, we only create the
security context when the receiver requests it.
This new design requires modification of the current
unix_getsecpeer_dgram LSM hook and addition of two new hooks, namely,
secid_to_secctx and release_secctx. The former retrieves the security
context and the latter releases it. A hook is required for releasing
the security context because it is up to the security module to decide
how that's done. In the case of Selinux, it's a simple kfree
operation.
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initializes newcontext sooner to allow for its destruction in all cases.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch fixes a memory leak when a policydb structure is destroyed.
Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
After some discussion on the actual meaning of the filesystem class
security check in try context mount it was determined that the checks for
the context= mount options were not correct if fscontext mount option had
already been used.
When labeling the superblock we should be checking relabel_from and
relabel_to. But if the superblock has already been labeled (with
fscontext) then context= is actually labeling the inodes, and so we should
be checking relabel_from and associate. This patch fixes which checks are
called depending on the mount options.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Introduce a new rootcontext= option to FS mounting. This option will allow
you to explicitly label the root inode of an FS being mounted before that
FS or inode because visible to userspace. This was found to be useful for
things like stateless linux, see
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=190001
Signed-off-by: Eric Paris <eparis@parisplace.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Remove the conflict between fscontext and context mount options. If
context= is specified without fscontext it will operate just as before, if
both are specified we will use mount point labeling and all inodes will get
the label specified by context=. The superblock will be labeled with the
label of fscontext=, thus affecting operations which check the superblock
security context, such as associate permissions.
Signed-off-by: Eric Paris <eparis@parisplace.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch introduces object audit filters based on the elements
of the SELinux context.
Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
kernel/auditfilter.c | 25 +++++++++++++++++++++++++
kernel/auditsc.c | 40 ++++++++++++++++++++++++++++++++++++++++
security/selinux/ss/services.c | 18 +++++++++++++++++-
3 files changed, 82 insertions(+), 1 deletion(-)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch renames some audit constant definitions and adds
additional definitions used by the following patch. The renaming
avoids ambiguity with respect to the new definitions.
Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com>
include/linux/audit.h | 15 ++++++++----
kernel/auditfilter.c | 50 ++++++++++++++++++++---------------------
kernel/auditsc.c | 10 ++++----
security/selinux/ss/services.c | 32 +++++++++++++-------------
4 files changed, 56 insertions(+), 51 deletions(-)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
Remove obsolete #include <linux/config.h>
remove obsolete swsusp_encrypt
arch/arm26/Kconfig typos
Documentation/IPMI typos
Kconfig: Typos in net/sched/Kconfig
v9fs: do not include linux/version.h
Documentation/DocBook/mtdnand.tmpl: typo fixes
typo fixes: specfic -> specific
typo fixes in Documentation/networking/pktgen.txt
typo fixes: occuring -> occurring
typo fixes: infomation -> information
typo fixes: disadvantadge -> disadvantage
typo fixes: aquire -> acquire
typo fixes: mecanism -> mechanism
typo fixes: bandwith -> bandwidth
fix a typo in the RTC_CLASS help text
smb is no longer maintained
Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
|
|
Add a new security hook definition for the sys_ioprio_get operation. At
present, the SELinux hook function implementation for this hook is
identical to the getscheduler implementation but a separate hook is
introduced to allow this check to be specialized in the future if
necessary.
This patch also creates a helper function get_task_ioprio which handles the
access check in addition to retrieving the ioprio value for the task.
Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch extends the security_task_kill hook to handle signals sent by AIO
completion. In this case, the secid of the task responsible for the signal
needs to be obtained and saved earlier, so a security_task_getsecid() hook is
added, and then this saved value is passed subsequently to the extended
task_kill hook for use in checking.
Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
This patch implements an API whereby an application can determine the
label of its peer's Unix datagram sockets via the auxiliary data mechanism of
recvmsg.
Patch purpose:
This patch enables a security-aware application to retrieve the
security context of the peer of a Unix datagram socket. The application
can then use this security context to determine the security context for
processing on behalf of the peer who sent the packet.
Patch design and implementation:
The design and implementation is very similar to the UDP case for INET
sockets. Basically we build upon the existing Unix domain socket API for
retrieving user credentials. Linux offers the API for obtaining user
credentials via ancillary messages (i.e., out of band/control messages
that are bundled together with a normal message). To retrieve the security
context, the application first indicates to the kernel such desire by
setting the SO_PASSSEC option via getsockopt. Then the application
retrieves the security context using the auxiliary data mechanism.
An example server application for Unix datagram socket should look like this:
toggle = 1;
toggle_len = sizeof(toggle);
setsockopt(sockfd, SOL_SOCKET, SO_PASSSEC, &toggle, &toggle_len);
recvmsg(sockfd, &msg_hdr, 0);
if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) {
cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr);
if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) &&
cmsg_hdr->cmsg_level == SOL_SOCKET &&
cmsg_hdr->cmsg_type == SCM_SECURITY) {
memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext));
}
}
sock_setsockopt is enhanced with a new socket option SOCK_PASSSEC to allow
a server socket to receive security context of the peer.
Testing:
We have tested the patch by setting up Unix datagram client and server
applications. We verified that the server can retrieve the security context
using the auxiliary data mechanism of recvmsg.
Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com>
Acked-by: Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
