aboutsummaryrefslogtreecommitdiff
path: root/sound/isa
AgeCommit message (Collapse)Author
2009-04-10Merge git://git.infradead.org/~dwmw2/firmware-2.6Linus Torvalds
* git://git.infradead.org/~dwmw2/firmware-2.6: qla1280: Fix off-by-some error in firmware loading. Add README.AddingFirmware file. Basically telling people not to. firmware: Remove newly-added slicoss and sxg firmware images firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw ALSA: wavefront - Always use request_firmware() Remove fdump tool for av7110 firmware firmware: convert av7110 driver to request_firmware() Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card" Revert "fix modules_install via NFS" Add-add conflicts in firmware/WHENCE fixed manually
2009-04-06ALSA: wavefront - Always use request_firmware()Takashi Iwai
Always use request_firmware() for loading yss225_registers image. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06ALSA: opl3sa2: add ZV port controlKrzysztof Helt
Add ZV port control switch. This patch is done after solution given in the ALSA bug #2872 report. The patch resolves the issue. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24Merge branch 'topic/sscape-fix' into for-linusTakashi Iwai
2009-03-24Merge branch 'topic/msnd' into for-linusTakashi Iwai
2009-03-24Merge branch 'topic/isa-misc' into for-linusTakashi Iwai
2009-03-24Merge branch 'topic/cs423x-merge' into for-linusTakashi Iwai
2009-03-24Merge branch 'topic/snd_card_new-err' into for-linusTakashi Iwai
2009-03-17Merge branch 'fix/opl3sa2-suspend' into topic/isa-miscTakashi Iwai
2009-03-17ALSA: opl3sa2 - Fix NULL dereference when suspending snd_opl3sa2Krzysztof Helt
Fix the OOPS during a opl3sa2 card suspend and resume if the driver is loaded but the card is not found. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-02ALSA: opl3sa2 fix irq releasing and short name of cardKrzysztof Helt
Two simple fixes: 1. Use the same pointer for the free_irq() and the request_irq() calls. 2. A short name of card is appended with '2' or '3' character depending on a detected chip. Remove the '2' character from the short name. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23ALSA: ALS4000, slight mixer improvementsAndreas Mohr
- add 8kHz / 20 kHz low-pass filter switch control - add ALS4000 Mono capture route control - add annotations to specs pages - improve ALS4000 PM saved regs selection (remove SB dummy register, add missing ones) - add some missing ALS4000 register defines - constify two variables Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-17ALSA: cs4236 - Merge snd-cs4236-lib module into snd-cs4236Takashi Iwai
Since cs4232 and cs4236 drivers are merged, there is no reason to keep snd-cs4236-lib module separately. Let's merge it into the main driver as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-16ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detectionKrzysztof Helt
cs4232 and cs4236 driver merge to solve PnP BIOS detection. Also, the patch adds recognition if the chip is cs4236b+ or earlier part. This unifies drivers for both cs4232 and cs4236+ chips. It allows to use the PnP BIOS detection for the cs4236+ chips. Previously, only the snd-cs4232 could be detected by the PnP BIOS. The cs4232+ cards reports two separate PnP BIOS ids. The patch adds search for the second id to find out resources assigned to a control port. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-16Merge branch 'topic/snd_card_new-err' into topic/cs423x-mergeTakashi Iwai
2009-02-05ALSA: isa/*: Add missing KERN_* prefix to printkTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: gus - Add missing KERN_* prefix to printkTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: wss - Add missing KERN_* prefix to printkTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-04ALSA: msnd - Fix build error with CONFIG_PNP=nTakashi Iwai
sound/isa/msnd/msnd_pinnacle.c:891: error: 'isapnp' undeclared (first use in this function) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-04ALSA: sscape: drop redundant fields from soundscape structKrzysztof Helt
The wss_base is disuised parameter for one function. It is converted to function parameter. The code_type is only set but never read. It is removed. The midi_vol is set only to 0 so it does not work as detection of change in midi volume. It is fixed. The xport variable is alias to the port[dev]. Use the port[dev] directly to increase readability. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-02ALSA: msnd: add module description and license for the snd-msnd-libKrzysztof Helt
The missing module license generates warning during module loading. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-30ALSA: ess1688: fix OPL3 port settingKrzysztof Helt
The ess1688 driver uses the same port for PCM audio (SB compatible) and OPL3 synthesis. It is not always right so allow to choose a different port for OPL3 synthesis. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-29ALSA: cmi8330: add MPU-401 supportKrzysztof Helt
Add MPU-401 port support for the chip. Also, update some error messages and description. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-29ALSA: gus: update debug messagesKrzysztof Helt
Convert some of them to snd_printdd() and update arguments to make them compilable. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-29ALSA: sscape: update Kconfig description about SoundScape cardsKrzysztof Helt
The SoundScape driver handles more cards then described. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-28ALSA: enable build of snd-msnd-* driversTakashi Iwai
Added the missing msnd directory to Makefile. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-28ALSA: Turtle Beach Multisound Classic/Pinnacle driverKrzysztof Helt
This is driver for Turtle Beach Multisound cards: Classic, Fiji and Pinnacle. Tested pcm playback and recording and MIDI playback on Multisound Pinnacle. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-21ALSA: ad1816a: enable hardware timerKrzysztof Helt
Enable hardware timer with 10 usec resolution. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-21ALSA: do not create OPL3 timers if there is no OPL3 irq wiredKrzysztof Helt
Most cards have OPL3 FM synthetiser but they do not have OPL3 interrupt wired to a sound chip or CPU. Do not create OPL3 timers for such cards as the timers are useless witthout interrupt. This patch removes OPL3 timers for following alsa drivers: snd-ad1816a, snd-opti93x, snd-opti92x, snd-sc6000, snd-cmi8330. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-21ALSA: sscape: use common MPU401 macrosKrzysztof Helt
Remove local macros which redefines the common ones. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-21ALSA: cmi8330: add OPL3 supportKrzysztof Helt
Add OPL3 handling to the driver and volume control for FM synthesis. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-17ALSA: wss-lib: remove "pops" before each played soundKrzysztof Helt
A WSS codec is autocalibrated each time before playing sound. Do only one calibration during codec initialization. Complete snd_wss_calibrate_mute to mute loopback volume as well. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-14ALSA: opti9xx - Fix build breakage by snd_card_create() conversionTakashi Iwai
Add a missing variable declaration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-13ALSA: sscape: fix incorrect timeout after microcode uploadKrzysztof Helt
A comment states that one should wait up to 5 secs while a waiting loop waits only 5 system ticks. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Return proper error code at probe in sound/isa/*Takashi Iwai
Some drivers in sound/isa/* don't handle the error code properly from snd_card_create(). This patch fixes these places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Convert to snd_card_create() in sound/isa/*Takashi Iwai
Convert from snd_card_new() to the new snd_card_create() function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-11ALSA: wss-lib: move AD1845 frequency setting into wss-libKrzysztof Helt
This is required to allow the sscape driver to autodetect installed codec. Also, do not create a timer if detected codec has no hardware timer (e.g. AD1848). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Rene Herman Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-20Merge branch 'topic/pcsp-fix' into topic/miscTakashi Iwai
2008-12-11ALSA: sb8 - Fix a return code in the error pathTakashi Iwai
Fixed a compile warning below: sound/isa/sb/sb8.c: In function ‘snd_sb8_probe’: sound/isa/sb/sb8.c:104: warning: ‘err’ may be used uninitialized in this function by setting the return value correctly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-10ALSA: gusextreme: Fix build errorsVille Syrjala
gusextreme depends on opl3 support. Add the approriate select to Kconfig. Also remove the unnecessary hwdep select. Relevant build errors: ERROR: "snd_opl3_hwdep_new" [sound/isa/gus/snd-gusextreme.ko] undefined! ERROR: "snd_opl3_create" [sound/isa/gus/snd-gusextreme.ko] undefined! Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-03ALSA: remove direct access of dev->bus_id in sound/isa/*Takashi Iwai
Removed the direct accesses of dev->bus_id in sound/isa/* by replacement with dev_err() or dev_warn() functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-09ALSA: remove stale filesTakashi Iwai
Empty files remained likely due to wrong patching. Remove them now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: remove obsolete *_FIRMARE_IN_KERNEL in isa/KconfigTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: wss_lib: do not mess mixer settings during probeKrzysztof Helt
Use the wss_dout function which does not mess shadowed register values during chip probing. Otherwise, user ends up with stupid mixer settings after driver loading. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: snd-ad1816a: add different TerraTec EWS64 S modelRene Herman
Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: opl3sa2: replace nd_opl3sa2_info_xxx() with snd_wss_info_xxx()Krzysztof Helt
Replace snd_opl3sa2_info_xxx() with snd_wss_info_xxx(). Drop check of card->private_data which cannot be NULL if card is not NULL (spotted by Rene Herman). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: wss_lib: snd_wss_calibrate_mute improvementKrzysztof Helt
Mute sound by setting mute bit without setting volume to 0. It makes both source code and binary shorter. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: opl3sa2: drop snd_card pointer from the snd_opl3sa2 structureKrzysztof Helt
Remove card pointer from the snd_opl3sa2 structure and break circular reference snd_card->snd_opl3sa2->snd_card. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in sound/isa/*Takashi Iwai
Kill snd_assert() in sound/isa/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: wss_lib: missing closing brace in (ifdeffed out) debug function.Rene Herman
Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>