aboutsummaryrefslogtreecommitdiff
path: root/sound/pci/hda
AgeCommit message (Collapse)Author
2009-04-13Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)Yang Hongyang
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Merge branch 'topic/hda' into for-linusTakashi Iwai
2009-04-07ALSA: hda - Add VREF powerdown sequence for another boardMatthew Ranostay
Add powerdown sequence for VREF using a shared jack when the headphone is present and the microphone isn't on. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-07ALSA: hda - add missing comma in ad1884_slave_volsAkinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-06Merge branch 'topic/hda' into for-linusTakashi Iwai
2009-04-06ALSA: hda - enable SPDIF output for Intel DX58SO boardWu Fengguang
ALC889 has two SPDIF outputs: 0x06, 0x10. Board vendors can use either or both. DX58SO uses 0x10, but the driver assumes 0x06. The safe solution is to add 0x10 as slave output to the existing 0x06. Reported-by: Jeroen Van Breedam <jeroen.vanbreedam@sgr5.be> Tested-by: Jeroen Van Breedam <jeroen.vanbreedam@sgr5.be> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-06ALSA: Add 92HD81B1C device idMatthew Ranostay
Added device id in struct for codec 92HD81B1C (0x111d76d5). Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24Merge branch 'topic/hda' into for-linusTakashi Iwai
2009-03-24Merge branch 'topic/snd_card_new-err' into for-linusTakashi Iwai
2009-03-23ALSA: hda - Add quirk for Acer Ferrari 5000Takashi Iwai
Add a quirk model=acer-aspire for Acer Ferrari 5000 with ALC883 codec. Note that model=auto doesn't work for this laptop because of broken BIOS (that doesn't set the subsystem id properly). Tested-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23ALSA: hda - Use cached calls to get widget caps and pin capsTakashi Iwai
Replace with the standard function calls to use caches for reading the widget caps and pin caps. hda_proc.c is still using the direct verbs to get raw values as much as possible. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23ALSA: hda - Don't create empty/single-item input sourceTakashi Iwai
In patch_realtek.c, don't create empty or single-item "Input Source" control elements that are simply superfluous. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23ALSA: hda - Fix the wrong pin-cap check in patch_realtek.cTakashi Iwai
The check for the amp-output must be done for widget-caps rather than pin-caps as implemented in the recent change... Simply a thinko. Also, add the similar checks to all places that put output-amp mutes in the initialization. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23ALSA: hda - Cache pin-cap valuesTakashi Iwai
Added snd_hda_query_pin_caps() to read and cache pin-cap values to avoid too frequently issuing the same verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23ALSA: hda - Avoid output amp manipulation to digital mic pinsTakashi Iwai
Don't set amp-out values to pins without PINCAP_OUT capability, which are usually assigned for digital mics on ALC663/ALC272. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23ALSA: hda - Add function id to proc outputPascal de Bruijn
This patch does two things: Output Intel HDA Function Id in /proc/asound/cardX/codec#X Align Vendor/Subsystem/Revision Ids to 8 characters, front-padded with zeros Before: Vendor Id: 0x11d41884 Subsystem Id: 0x103c281a Revision Id: 0x100100 After: Function Id: 0x1 Vendor Id: 0x11d41884 Subsystem Id: 0x103c281a Revision Id: 0x0100100 As report on the Kernel Bugzilla #12888 Signed-off-by: Pascal de Bruijn <pascal@unilogicnetworks.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-20Merge branch 'topic/hda-optimize' into topic/hdaTakashi Iwai
2009-03-20ALSA: hda - Detect digital-mic inputs on ALC663 / ALC272Takashi Iwai
Fix the detection of digital-mic inputs on ALC663 / ALC272 codecs in the auto-detection mode. The automatic mic switch via plugging isn't implemented yet, though. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: hda - Don't show the current connection for power widgetsTakashi Iwai
The power-widgets have no connection selection, so skip the check in proc output, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: hda - Don't reset stream at each prepare callbackTakashi Iwai
Don't reset the stream at each prepare callback but do it only once after the open. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: hda - Don't reset BDL unnecessarilyTakashi Iwai
So far, the prepare callback is called multiple times, BDL entries are reset and re-programmed at each time. This patch adds the check to avoid the reset of BDL entries when the same parameters are used. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-03-18ALSA: snd-hda-intel - add checks for invalid values to *query_supported_pcm()Jaroslav Kysela
If ratesp or formatsp values are zero, wrong values are passed to ALSA's the PCM midlevel code. The bug is showed more later than expected. Also, clean a bit the code. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: hda - Workaround for buggy DMA position on ATI controllersTakashi Iwai
The position-buffer on ATI controllers are unreliable as well as on VIA chips, thus the same workaround for DMA position reading as VIA is useful for ATI. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: hda - Fix DMA mask for ATI controllersTakashi Iwai
ATI controllers (at least some SB0600 models) appear buggy to handle 64bit DMA. As a workaround, reset GCAP bit0 and let the driver to use only 32bit DMA on these controllers. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-16ALSA: hda - Fix ALC662 beep againTakashi Iwai
The previous commit breaks the (digital-) beep on ALC662. ALC662 has the connection index 0x05 while ALC662 and ALC272 have the index 0x04 for the beep widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-16ALSA: snd-hda-intel: Fix ALC662/ALC663 Beep Amplifier IndexJaroslav Kysela
ALC662/663 codecs have Beep Amplifier Index 0x04 not 0x05 in 0x0b NID. Confirmed by testing on real hardware. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-13ALSA: hda - Add another HP model with IDT92HD71bx codecTakashi Iwai
HP laptops require GPIO0 on as EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-13ALSA: hda - power up before codec initializationTakashi Iwai
Change the power state of each widget before starting the initialization work so that all verbs are executed properly. Also, keep power-up during hwdep reconfiguration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ALSA: hda - Add model=vaio for STAC9872Takashi Iwai
Add the default pin config for model=vaio (in case of broken BIOS). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ALSA: hda - Print multiple out-amp values of pin widgets on Conext codecsTakashi Iwai
Add a flag to work around the non-standard amp-value handling on Conexant codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ALSA: hda - Add comments for the previous fix for conexant codecsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ALSA: hda - fix headphone settings and master volume (Conexant CX20551)Gregorio Guidi
Update the places where the 0x1d widget is used for Conexant 5047, fixing mismatch introduced after changing the connection. Signed-off-by: Gregorio Guidi <gregorio.guidi@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10ALSA: hda - Clean up Cxt5047 parserTakashi Iwai
Clean up Conexant 5047 pareser code: - Split mixer elements to separate arrays to reduce the duplicated entires - Fix mixer element names to the standard ones - Remove unneeded cxt5047_hp2_unsol_event; the normal unsol_event handler works fine. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10ALSA: hda - Fix / clean up init verbs for Cxt5047 codecTakashi Iwai
Fix the initial connections of output pins 0x13 and 0x1d for Conexant 5047 codec to point to the mixer amp properly. Removed unneeded (doubly) verbs from arrays, also removed the unneeded changing of widget 0x1c, which is now completely unused. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10ALSA: hda - Remove superfluous verbs for Cxt5047 laptop-eapd modelTakashi Iwai
Remove superfluous verbs from cxt5047_toshiba_init_verbs[]. Also fix comments and minor coding style issues. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10ALSA: hda - Create "Capture Source" control dynamically in patch_conexant.cTakashi Iwai
Create "Capture Source" control dynamically for Conexant codecs. If only one capture item is available, don't create such a control since it's just useless. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10ALSA: hda - Create vmaster for conexant codecsTakashi Iwai
Instead of binding volumes, create a virtual master volume for Conexant codecs. This allows separate HP and speaker volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10ALSA: hda - Fix coding style issues in last two patchesTakashi Iwai
Also re-ordered the quirk entries per SSID. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10ALSA: hda - Rework on patch_sigmatel.c for HP HDX16/HDX18Christoph Plattner
Code rework, comments of mail tiwai@suse.de (2009-03-09) incorporated. Code tested on HP HDX16 (not tested on HDX18 yet). Signed-off-by: Christoph Plattner <christoph.plattner@gmx.at> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10ALSA: hda - Added HP HDX16/HDX18 notebook support for HDA codecs (82HD71)Christoph Plattner
Added codec recognition of HP HDX platforms and added support of the MUTE LED (orange/white). For this feature the CONFIG_SND_HDA_POWER_SAVE is needed to use event handling for mute control. Signed-off-by: Christoph Plattner <christoph.plattner@gmx.at> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-06ALSA: hda - Assign HP and speaker DACs before mic/line-inTakashi Iwai
Assign DACs to HP and speaker before mic-in/line-in shared outputs. This improves the usability as it results in more intuitive mixer names. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-06ALSA: hda - Connect to primary DAC if no individual DAC is availableTakashi Iwai
In stac92xx_auto_fill_dac_nids[], connect to the primary DAC if no individual DAC is available for each pin. This ensures that the pin works somehow at least. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-06ALSA: hda - Create multiple HP / speaker controls with indexTakashi Iwai
Create multiple "Headphone" and "Speaker" controls with non-zero index numbers instead of "Headphone2", etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-06ALSA: hda - Allow slave controls with non-zero indicesTakashi Iwai
Fix snd_hda_add_vmaster() to check the non-zero indices of slave controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-06ALSA: hda - Create output controls according to pin types for IDT/STACTakashi Iwai
Improve the parser to pick up more intuitive control names for the outputs judging from the pin type, instead of fixed names assigned to channels. Also, revive the multi-HP workaround since this change fixes the problem with the multi-HP detection. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-06Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-03-06ALSA: hda - Fix headphone-detect regression with multiple HP jacksTakashi Iwai
The recent changes over the DAC detection mechanism in patch_sigmatel.c breaks the HP detection on the machines with multiple HP jacks. It's basically because of the workaround to support the multi-channel output. Since the HP detection is more important feature, disable the HP-swap workaroud temporarily. Reference: Novell bnc#482052 https://bugzilla.novell.com/show_bug.cgi?id=482052 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-06ALSA: hda - Fix typos in slave controls in patch_sigmatel.cTakashi Iwai
"Headphone Playback ..." appears twice in slave_vols[] and slave_sws[]. They should be "Headphone Playback2 ..." Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-05ALSA: Fix sample rate of Lenovo Ideapad to 44.1kHzTakashi Iwai
Noises can be heard on analog outputs of (some model of) Lenovo Ideapad due to the hardware problem, and the only workaround right now is to fix the sample rate to 44.1kHz. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-10 08:01:54 +0000