aboutsummaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2009-12-04Merge branch 'topic/hda' into for-linusTakashi Iwai
2009-12-04Merge branch 'topic/misc' into for-linusTakashi Iwai
2009-12-03snd-fm801: autodetect SF64-PCR (tuner-only) cardOndrej Zary
When primary AC97 is not found, don't fail with tons of AC97 errors. Assume that the card is SF64-PCR (tuner-only). This makes the SF64-PCR radio card work "out of the box". Also fixes a bug that can cause an oops here:         if (tea575x_tuner > 0 && (tea575x_tuner & 0x000f) < 4) { when tea575x_tuner == 16, it passes this check and causes problems a couple lines below:         chip->tea.ops = &snd_fm801_tea_ops[(tea575x_tuner & 0x000f) - 1]; Tested with SF64-PCR, but I don't have any of those sound or sound+radio cards to test if I didn't break anything. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-03ALSA: hda - Fix memory leaks in the previous patchTakashi Iwai
The previous hack for replacing the codec name give memory leaks at error paths. This patch fixes them. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-03ALSA: hda - Add ALC661/259, ALC892/888VD supportKailang Yang
Fixed List: 1. Add alc_read_coef_idx function 2. Add ALC661 ALC259 3. Add ALC892 ALC888VD Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-01Merge branch 'topic/pcm-dma-fix' into topic/core-changeTakashi Iwai
2009-12-01Merge branch 'topic/beep-rename' into topic/core-changeTakashi Iwai
2009-12-01Merge branch 'topic/ice1724-quartet' into topic/hdaTakashi Iwai
2009-12-01Merge branch 'topic/oxygen' into topic/hdaTakashi Iwai
2009-12-01ALSA: hda - Add position_fix quirk for HP dv3Takashi Iwai
HP dv3 requires position_fix=1. Reference: Novell bnc#555935 https://bugzilla.novell.com/show_bug.cgi?id=555935 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-01ALSA: hda - Add a pin-fix for FSC Amilo Pi1505Takashi Iwai
FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and speaker pins properly. Add the pinfix entry for that. Reference: Novell bnc#557403 https://bugzilla.novell.com/show_bug.cgi?id=557403 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-01Merge branch 'fix/misc' into topic/miscTakashi Iwai
2009-11-30ALSA: hda - Fix Cxt5047 test modeTakashi Iwai
The NID 0x1a of Conexant 5047 chip is a mic boost volume only with the output amp unlike 5045 chip. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-30ALSA: hda - Add a position_fix quirk for MSI Wind U115Takashi Iwai
MSI Wind U115 seems to require position_fix=1 explicitly. Otherwise it screws up PulseAudio. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-27ALSA: hda - Don't trigger pin-sense for STAC/IDT codecsTakashi Iwai
STAC/IDT codecs seem to behave weird when SET_PIN_SENSE verb is issued before reading the jack-detection although the TRIG_REQ pin capability is given by the hardware. Since snd_hda_jack_detect() issues the SET_PIN_SENSE verb simply judging from the pincap, we have to revert the change in the commit d56757abc11a21996d9839c0d4e3b2c3666cd318 ALSA: hda - Replace the rest of jack-detections with snd_hda_jack_detect() to plain GET_PIN_SENSE verb without triggering. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-26ALSA: hda: Fix max PCM level to 0 dB for Fujitsu-Siemens laptops using ↵Daniel T Chen
CX20549 (Venice) BugLink: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4792 Cristian reported that these models have really bad sound above 6 dB and proposed the original patch. I've updated the comment to reflect this change. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Reported-by: Cristian Klein Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-25ALSA: intel8x0: Mute External Amplifier by default for Gateway 4525GZDaniel T Chen
BugLink: https://bugs.launchpad.net/bugs/487884 This Gateway model needs External Amplifier muted for audible playback, so set the inv_eapd quirk for it. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-24ALSA: hda - Make Dell Vostro 1015n mic and speaker switching workEinar Rünkaru
Dell Vostro 1015n uses Conexant CX20583-10Z (0x14f1:5067). Patch is based on "olpc-xo-1_5" branch. Dell uses digital mic. Signed-off-by: Einar Rünkaru <einarry@smail.ee> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-24Revert "ALSA: hda - Change quirk for Acer Aspire 5930G"Takashi Iwai
This reverts commit f2624791a0c2a2d7664b12d75ca327917141fd3b. Łukasz Wojniłowicz reported that the change causes both internal and external mics not working any more. The headphone jacking issue was fixed by his previous patch, it's better to revert to acer-aspire-4930g model. Reported-by: Łukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-21ALSA: hda - Fix input and jack Kconfig depenenciesTakashi Iwai
CONFIG_SND_JACK needs to be selected explicitly only when INPUT=y or INPUT_SND. The current way, INPUT=SND_HDA_INTEL isn't strict enough. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-20ALSA: hda - 4930g mute lfe and side when pluging in headphonesŁukasz Wojniłowicz
Fixes first issue from comment 0021423 in bug 0004317 for Acer Aspire 5930g Signed-off-by: Łukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-19ALSA: hda - Change quirk for Acer Aspire 5930GTakashi Iwai
Change the quirk for Acer Aspire 5930G from model=acer-aspire-4930g to model=acer-aspre-6530g. The tuba bass gets muted along with the other built-in speakers upon headphones insertion, the internal mic works perfectly etc. Reported-by: Claudio Viano <claudio.viano@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: hda - Fix mute-LED sync on HP laptops with IDT92HD83xxx codecsTakashi Iwai
The mute-LED isn't synchronized with the actual mute state on some HP laptops with IDT 92HD83xxx codecs. A similar hack using check_power_status callback is added for this codec, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-11-18ALSA: hda - Fix detection of dual headphonesTakashi Iwai
The dual-headphone mode with STAC/IDT codecs is useful only for machines that have two (or more) built-in headphones. But, some HP laptops give multiple headphone pin configs, one for the built-in and another for the separate (likely a docking station) one. This results in a missing speaker volume control. This patch adds more check for the dual-headphone mode to avoid this problem. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: hda - Replace the rest of jack-detections with snd_hda_jack_detect()Takashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: hda - show EPSS capability in procWu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: intelhdmi - sticky channel countWu Fengguang
Don't change channel count if not necessary. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: intelhdmi - sticky stream id and formatWu Fengguang
We tracked down the first-0.5s-hdmi-audio-samples-lost problem to the AC_VERB_SET_CHANNEL_STREAMID command. It is suspected that many HDMI sinks need some time to adapt to the new state. The workaround is to avoid changing stream id/format whenever possible. Proposed by David. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: intelhdmi - sticky infoframeWu Fengguang
Remember the active infoframe, so as to avoid stop/restart infoframe transmission when switching between audio clips of the same format. Proposed by Shang and David. CC: Shane W <shane-alsa@csy.ca> CC: David Härdeman <david@hardeman.nu> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: intelhdmi - separate out infoframe checksum routineWu Fengguang
And make it right when called for more than one times. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: intelhdmi - probe for monitor/eld presence at module init timeWu Fengguang
This avoids lost of presence info on module reloading. The presence info used to be only updated at the (rare) hotplug events. Proposed by David, thanks! CC: David Härdeman <david@hardeman.nu> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: hda - introduce snd_hda_jack_detect() and snd_hda_pin_sense()Wu Fengguang
This helps merge duplicate code. v2: add snd_hda_jack_detect() and comments recommended by Takashi. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: intelhdmi - export monitor-presence and ELD-valid statusWu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: intelhdmi - fix channel mapping slot maskWu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: intelhdmi - fix audio infoframe fill sizeWu Fengguang
Reported-by: David Härdeman <david@hardeman.nu> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-17ALSA: hda - Disable default quirk for Sony VAIO with ALC262 codecTakashi Iwai
The ALC262 has a quirk entry matching with all Sony Vaio laptops to use model=sony-assamd as default. But, model=auto works much better for new models in the recent driver versions, thus it's safer to disable that default quirk entry. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-17Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-11-17ALSA: hda - Fix quirk for VAIO type GTakashi Iwai
Vaio type G laptop doesn't work with the current quirk setup. After some tests, it turned out that it should be model=auto as default. Reported-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda - Fix build errors with CONFIG_SND_HDA_INPUT_BEEP=nTakashi Iwai
Disable beep-related codes when CONFIG_SND_HDA_INPUT_BEEP isn't set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda - Fix beep_mode option valueTakashi Iwai
The beep_mode option value was wrongly defined: it must be 0 = off and 1 = on. Also, evaluate the beep_mode value at snd_hda_attach_beep_device() properly so that no device is created when beep_mode=0 is given. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda - Update / add kerneldoc comments to exported functionsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda - move snd_hda_pcm_type_name from hda_codec.h to hda_local.hJaroslav Kysela
The snd_hda_pcm_type_name array is local only. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-11-16ALSA: hda - Get rid of magic digits for subdev hackTakashi Iwai
Define a proper const for a magic 31bit flag for subdev / NID setup with a brief comment. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda - proc - add support for dynamic controls to mixer<->NID mappingJaroslav Kysela
This patch adds support for dynamically created controls to proc codec file (Control: lines). Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda - proc - introduce Control: lines to show mixer<->NID assignmentJaroslav Kysela
This is an initial patch to show universal control<->NID assigment in proc codec file. The change helps to debug codec related problems. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda - add beep_mode module parameterJaroslav Kysela
The beep_mode parameter for snd-hda-intel module allows to choose among different digital beep device registation to the input layer. 0 = do not register to the input layer 1 = register to the input layer all time 2 = use "Beep Switch" control exported to user space mixer applications Also, introduce CONFIG_SND_HDA_INPUT_BEEP_MODE for default value. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda: beep - add missing cancel_delayed_workJaroslav Kysela
The unregister work should be also canceled in snd_hda_detach_beep_device() function. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda_intel: Digital PC Beep - delay input device unregistrationJaroslav Kysela
The massive register/unregister calls for input device layer might be overkill. Delay unregister call by one HZ as workaround. Also, as benefit, beep->enabled variable is changed immediately now (not from workqueue). Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 17:14:07 +0000