aboutsummaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2008-08-17ALSA: hda - Fix capture source widgets on ALC codecsTakashi Iwai
On some Realtek codecs like ALC882 or ALC883, the capture source is no mux but sum widget. We have to initialize all channels properly for this type, otherwise noises may come in from the unused route. The patch assures to mute unused routes, and unmute the currently selected route. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
2008-08-14ALSA: virtuoso: add Xonar D1 supportClemens Ladisch
Add support for the Asus Xonar D1. It is the same as the DX, but without the external power detection. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-12ALSA: hda - support new AMD HDMI Audio (1002:970f)Libin Yang
Signed-off-by: Libin Yang <libin.yang@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-12ALSA: hda_intel: ALSA HD Audio patch for Intel Ibex Peak DeviceIDsSeth Heasley
This patch adds the Intel Ibex Peak (PCH) HD Audio Controller DeviceIDs. Signed-off by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).Nicolas Boichat
Currently, even if you pass model=intel-mac-v3 as a module parameter to snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still try to auto-detect the model type. This is a problem on my MacBook Pro 1st generation, which needs intel-mac-v3, but sometimes incorrectly reports 0x00000100 as subsystem id, which causes the switch in patch_stac922x to select intel-mac-v4. To fix this, I added a new model called intel-mac-auto, so in case no module parameter is passed, and an Intel Mac board is detected, the model will be automatically detected, while no detection will be done if the model is forced to intel-mac-v3. This problem has been around for quite a while, and I used to fix it by moving the case statement for 0x00000100 in patch_stac922x so that intel-mac-v3 is chosen. Another way to fix the problem would be to check if a module parameter was set directly in patch_stac922x, using something like this: if (spec->board_config == STAC_INTEL_MAC_V3 && !codec->bus->modelname) { But I think it is less elegant (if you prefer that way, I can prepare a patch). Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27ALSA: hda - Add automatic model setting for the Acer Aspire 5920G laptopTravis Place
Make the Acer Aspire 5920G (1025:0121) select ALC883_ACER_ASPIRE by default. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27ALSA: make snd_ac97_add_vmaster() staticAdrian Bunk
This patch makes the needlessly global snd_ac97_add_vmaster() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27ALSA: sound/pci/azt3328.h: no variables for enumsAdrian Bunk
AZF_FREQUENCIES and AZF_GAME_CONFIGS were variables, and this doesn't seem to have been intended. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-18ALSA: hda - Add support of ASUS Eeepc P90*Kailang Yang
- Support ASUS_P900A = P703 - Support ASUS_P901 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-17ALSA: hda - Added support for Asus V1SnAlexander Holler
Added the necessary ID for Asus V1Sn to patch_realtek.c to use ALC861VD_LENOVO on these laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-17ALSA: ALSA: ens1370: communicate PCI device to AC97Rene Herman
communicate the ES137x PCI device to the AC97 code for its subsys_vendor/device values Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-17ALSA: ens1370: SRC stands for Sample Rate ConverterRene Herman
Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-16ALSA: hda - Align BDL position adjustment parameterTakashi Iwai
It seems NVidia and other hardwares require the alignment for period update timing. For satisfying this condition, align the position adjustment for delayed wake-up to the initial bdl_pos_adj value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-15ALSA: add TriTech 28023 AC97 codec ID and Wolfson 9701 name.Rene Herman
Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse
Conflicts: sound/pci/Kconfig
2008-07-14ALSA: correct kcalloc usageMilton Miller
kcalloc is supposed to be called with the count as its first argument and the element size as the second. Both arguments are size_t so does not affect correctness. This callsite is during module_init and therefore not performance critical. Another patch will optimize the case when the count is variable but the size is fixed. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14ALSA: hda - Fix FSC V5505 modelTakashi Iwai
model=laptop-hpmicsense matches better to FSC V5505 laptop. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14ALSA: hda - Fix missing init for unsol events on micsense modelTakashi Iwai
Fixed the missing initialization for unsolicited events on Cx5045 micsense model. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14ALSA: hda - Fix internal mic vref pin setupTakashi Iwai
Set the vref80 to the internal mic pin 0x12 for Cx5045. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14ALSA: hda: 92hd71bxx PC BeepMatthew Ranostay
Added volume controls for the analog PC Beep on 92hd71bxx codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10firmware: convert ymfpci driver to use firmware loader exclusivelyDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10firmware: convert maestro3 driver to use firmware loader exclusivelyDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10firmware: convert korg1212 driver to use firmware loader exclusivelyDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10Fix a const pointer usage warning in the Digigram miXart soundcard driverDavid Howells
Fix a const pointer usage warning in the Digigram miXart soundcard driver. A const pointer is being passed to copy_from_user() to load the firmware into. This is okay in this case because the function has allocated the firmware struct itself, but the const qualifier is part of the firmware struct - so the patch casts the const away. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-10Fix a const pointer usage warning in the Digigram pcxhr soundcard driverDavid Howells
Fix a const pointer usage warning in the Digigram pcxhr compatible soundcard driver. A const pointer is being passed to copy_from_user() to load the firmware into. This is okay in this case because the function has allocated the firmware struct itself, but the const qualifier is part of the firmware struct - so the patch casts the const away. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-10ymfpci: treat firmware data as constDavid Woodhouse
Standardise both in-kernel and loaded firmware to be stored as little-endian instead of host-endian. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10maestro3: treat firmware data as constDavid Woodhouse
The maestro3 driver is byte-swapping its firmware to be host-endian in advance, when it doesn't seem to be necessary -- we could just use le16_to_cpu() as we load it. Doing that means that we need to switch the in-tree firmware to be little-endian too. Take the least intrusive way of doing this, which is to switch the existing snd_m3_convert_from_le() function to convert _to_ little-endian instead, and use it on the in-tree firmware instead of the loaded firmware. It's a bit suboptimal but doesn't matter much right now because we're about to remove the special cases for the in-tree version anyway. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10pcxhr: treat firmware data as constDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10riptide: treat firmware data as constDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10vx222: treat firmware data as constDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10ALSA: HDA - HP dc7600 with pci sub IDs 0x103c/0x3011 belongs to hp-3013 modelJaroslav Kysela
As reported and tested by an RedHat customer, HP dc7600 with pci sub IDs 0x103c/0x3011 works with the hp-3013 model and not with the hp only model. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: hda - removed redundant gpio_maskMatthew Ranostay
An gpio_mask value was defined twice needlessly. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: hda - Add support for Lenovo 3000 N200Takashi Iwai
Added the model entry (model=lenovo) for Lenovo N3000 N200 laptop with ALC861-VD. Reference below: https://bugzilla.novell.com/show_bug.cgi?id=406425 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: ac97 - fix patch_ucb1400 for proper resumeMike Rapoport
Replace 'snd_ac97_write' with snd_ac97_write_cache' in pacth_ucb1400 to allow proper codec wakeup. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: ALSA: hda - Fix speaker output on Toshiba P105Takashi Iwai
Toshiba Satellite P105 with cx5045 has no HP pin but only a speaker pin and does the speaker-muting on hardware. Thus the matching model is laptop-micsense. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: hda - Add missing Thinkpad Z60m supportTakashi Iwai
Added the missing SSID of Thinkpad Z60m for model=thinkpad with AD1981HD. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: ALSA: hda - Fix ALC883 medion modelTakashi Iwai
ALC883 medion model doesn't unmute the proper amps so no output can be heard. Replaced the mute switches to behave just like other models. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: Fix AC97 power downTakashi Iwai
Some laptops don't like PR3 powerdown. Do PR3 powerdown only for the real power-saving. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: via82xx - Add VIA audio device #1841 to ac97_quirk listWalter Sheets
Signed-off-by: Walter Sheets <w41ter@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-27ALSA: hda - disable amp override on non-HP machinesTakashi Iwai
Some machines with Cx5045 seem to have no problem with the volume over 0dB on NID 0x17. Disable amp overrides for other devices but HP. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-27ALSA: ymfpci - fix initial volume for 44.1kHz outputTakashi Iwai
YDSXGR_BUF441OUTVOL register isn't initialized properly. This may lead to a silent output at full volume of unchanged "Wave Playback Volume". http://bugzilla.kernel.org/show_bug.cgi?id=10963 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-27ALSA: hda - Add MacBook 3.1 supportTakashi Iwai
MacBook 3.1 is compatible with model=mbp3. Added the codec SSID 10b6:3600. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: PCI168 snd-azt3328: some more fixupsAndreas Mohr
- fix problem with codec register 0x6a being write-only by adding a software shadow register (caused annoying noise after module loading due to _toggling_ between gameport and audio bits instead of configuring them properly) - rename several "Wave" mixer controls to "PCM", since this is what Wine and several other apps are looking for (IOW, _requiring_) and this is what AC97 specs use as naming, too, thus I'd guess it's what these controls are - cleanup, small optimizations Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: trident - pause s/pdif outputPierre Ossman
Stop the S/PDIF DMA engine and output when the device is told to pause. It will keep on looping the current buffer contents if this isn't done. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Tested-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: hda - Added SSID for 'Fujitsu Siemens Amilo M1451G' laptopTravis Place
Add the SSID for the "Fujitsu Siemens Amilo M1451G" laptop to patch_realtek.c , so that it uses ALC880_FUJITSU by default. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: hda - Added model selection for iMac 24"Travis Place
Added the SSID of a known iMac 24" to automatically use ALC885_IMAC24 quirk. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-23ALSA: aw2 - Fix Oops at initializationTakashi Iwai
The irq handler may be called before the proper initialization of hardware. Call snd_aw2_saa7146_setup() before the irq handler registration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-20ALSA: hda - Fix digital converter proc outputTakashi Iwai
AC_VERB_GET_DIGI_CONVERT_2 isn't actually implemented but reserved. The whole SIC bits are returned from DIGI_CONVERT_1. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-18ALSA: ca0106 - Add entry for another MSI K8N Diamond MBTakashi Iwai
Added an entry for another MSI K8N Diamond mobo with SSID 1102:1009. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-18ALSA: hda - Fix wrong volumes in AD1988 auto-probe modeTakashi Iwai
Don't create mixer volume elements for Headphone and Speaker if they use the same DAC as normal line-outs on AD1988. Otherwise the amp value gets screwed up, e.g. https://bugzilla.novell.com/show_bug.cgi?id=398255 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>