aboutsummaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2009-09-21trivial: remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-18Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (62 commits) DaVinci: DM646x - platform changes for vpif capture and display drivers davinci: DM355 - platform changes for vpfe capture davinci: DM644x platform changes for vpfe capture davinci: audio: move tlv320aic33 i2c setup into board files DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs DaVinci: DM365: Adding entries for DM365 IRQ's DaVinci: DM355: Adding PINMUX entries for DM355 Display davinci: Handle pinmux conflict between mmc/sd and nor flash davinci: Add NOR flash support for da850/omap-l138 davinci: Add NAND flash support for DA850/OMAP-L138 davinci: Add MMC/SD support for da850/omap-l138 davinci: Add platform support for da850/omap-l138 GLCD davinci: Macro to convert GPIO signal to GPIO pin number davinci: Audio support for DA850/OMAP-L138 EVM davinci: Audio support for DA830 EVM davinci: Correct the number of GPIO pins for da850/omap-l138 davinci: Configure MDIO pins for EMAC DaVinci: DM365: Add Support for new Revision of silicon DaVinci: DM365: Fix Compilation issue due to PINMUX entry DaVinci: EDMA: Updating default queue handling ...
2009-09-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix MSI GX620 mixer ASoC: remove unused #include <linux/version.h> ASoC: S3C lrsync function made to work with IRQs disabled. ALSA: hda - Fix Dell S14 pin setup ALSA: hda - Fix IDT92HD83* codec setup ASoC: Fix display of stream name in DAPM debugfs ALSA: hda - Add support for HP dv6 ALSA: hda - Fix HP/line-out initialization with IDT/STAC codecs ALSA: hda - Set default GPIO for IDT92HD71bxx ALSA: hda - Set default GPIO for STAC/IDT codecs ASoC: Clean up error handling in MPC5200 DMA setup ALSA: hda - Add missing model=auto entry for ALC269
2009-09-17Merge branch 'fix/asoc' into for-linusTakashi Iwai
* fix/asoc: ASoC: remove unused #include <linux/version.h> ASoC: S3C lrsync function made to work with IRQs disabled. ASoC: Fix display of stream name in DAPM debugfs ASoC: Clean up error handling in MPC5200 DMA setup
2009-09-16ASoC: remove unused #include <linux/version.h>Huang Weiyi
Remove unused #include <linux/version.h>('s) in sound/soc/codecs/ad1836.c sound/soc/codecs/ad1938.c sound/soc/codecs/wm8974.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-15ASoC: S3C lrsync function made to work with IRQs disabled.Jassi
s3c2412_snd_lrsync() maybe reached with IRQs disabled and if LRCLK is dead due to improper initialization of CPU or CODEC, the system gets stuck in the loop because jiffies may never get updated. Implemented counter based wait mechanism for atleast the same timeout period. Signed-off-by: Jassi <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-14Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits) [ARM] Update mach-types ARM: 5636/1: Move vendor enum to AMBA include ARM: Fix pfn_valid() for sparse memory [ARM] orion5x: Add LaCie NAS 2Big Network support [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board ARM: 5689/1: Update default config of HP Jornada 700-series machines ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem ARM: 5688/1: ks8695_serial: disable_irq() lockup ARM: 5687/1: fix an oops with highmem ARM: 5684/1: Add nuc960 platform to w90x900 ARM: 5683/1: Add nuc950 platform to w90x900 ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver ARM: 5625/1: fix hard coded 4K resource size in amba bus detection MMC: MMCI: convert realview MMC to use gpiolib ARM: 5685/1: Make MMCI driver compile without gpiolib ARM: implement highpte ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ ... Fix up trivial conflict in arch/arm/kernel/signal.c. It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83f ("KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.
2009-09-14ASoC: Fix display of stream name in DAPM debugfsMark Brown
Also display streams all the time while we're here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-12ASoC: Clean up error handling in MPC5200 DMA setupJulia Lawall
Error handling code following a kzalloc should free the allocated data. Error handling code following an ioremap should iounmap the allocated data. The semantic match that finds the first problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-12Merge branch 'master' into develRussell King
2009-09-12Merge branch 'devel-stable' into develRussell King
Conflicts: MAINTAINERS arch/arm/mm/fault.c
2009-09-12Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and ↵Russell King
'w90x900' into devel
2009-09-10Merge branch 'topic/asoc' into for-linusTakashi Iwai
* topic/asoc: (226 commits) ASoC: au1x: PSC-AC97 bugfixes ASoC: Fix WM835x Out4 capture enumeration ASoC: Remove unuused hw_read_t ASoC: fix pxa2xx-ac97.c breakage ASoC: Fully specify DC servo bits to update in wm_hubs ASoC: Debugged improper setting of PLL fields in WM8580 driver ASoC: new board driver to connect bfin-5xx with ad1836 codec ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI ASoC: davinci: i2c device creation moved into board files ASoC: Don't reconfigure WM8350 FLL if not needed ASoC: Fix s3c-i2s-v2 build ASoC: Make platform data optional for TLV320AIC3x ASoC: Add S3C24xx dependencies for Simtec machines ASoC: SDP3430: Fix TWL GPIO6 pin mux request ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI OMAP: McBSP: Use textual values in DMA operating mode sysfs files ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510 ASoC: Select core DMA when building for S3C64xx ...
2009-09-08ASoC: au1x: PSC-AC97 bugfixesManuel Lauss
This patch fixes the following bugs: - only reprogram bitdepth if it has changed since last call to hw_params. - add locking inside ac97_read/write functions: When reprogramming sample depth, the ac97 unit has to be disabled, which should not be done in the middle of codec register accesses. - retry timed-out codec register accesses. - wait for status bits to set/clear when starting/stopping various functional blocks; very important after reenabling AC97 unit else sound may be distorted (e.g. high-pitch noise in 1kHz sine wave). - clear fifos before/after starting/stopping RX/TX. - longer timeouts waiting for PSC/AC97 ready after cold reset with certain codecs this can take ridiculous amounts of time. Run-tested on various Au1200 platforms with various codecs. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-07ASoC: Fix WM835x Out4 capture enumerationMark Brown
It's the 8th enum of a zero indexed array. This is why I don't let new drivers use these arrays of enums... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-09-02ASoC: Fully specify DC servo bits to update in wm_hubsMark Brown
Avoids potential issues if we read back unexpected values during a read/modify/write cycle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-01ASoC: Debugged improper setting of PLL fields in WM8580 driverjassi brar
Bug was caught while trying to use WM8580 as I2S master on SMDK. Symptoms were lesser LRCLK read by CRO(41.02 instead of 44.1 KHz) Solved by referring to WM8580A manual and setting mask value correctly and making the code to not touch 'reserved' bits of PLL4 register. Signed-off-by: Jassi <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-01ASoC: new board driver to connect bfin-5xx with ad1836 codecBarry Song
As discussed, the patch uses the original TDM order without rewriting. For the match between TDM slot number and audio channel number, a new API need be added. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-28ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAIJarkko Nikula
The McBSP1 port in OMAP3 processors (I believe OMAP2 too but I don't have specifications to check it) have additional CLKR and FSR pins for McBSP1 receiver. Reset default is that receiver is using bit clock and frame sync signal from those pins but it is possible to configure to use also CLKX and FSX pins as well. In fact, other McBSP ports are doing that internally that transmitter and receiver share the CLKX and FSX. Add functionaly that machine drivers can set the CLKR and FSR sources by using the snd_soc_dai_set_sysclk. Thanks to "Aggarwal, Anuj" <anuj.aggarwal@ti.com> for reporting the issue. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-28ASoC: davinci: i2c device creation moved into board filesChaithrika U S
Also, the codec setup data structure has to remain for successful probe. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-26ASoC: Don't reconfigure WM8350 FLL if not neededMark Brown
If the requested FLL configuration is the one we're currently running in it's at best pointless to reconfigure the FLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-26ASoC: Fix s3c-i2s-v2 buildMark Brown
We now need the PCM header to kick the DMA. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-26ASoC: Make platform data optional for TLV320AIC3xMark Brown
Now that we don't need the I2C address for the device the platform data is redundant so allow it to be omitted. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Chaithrika U S <chaithrika@ti.com>
2009-08-26ASoC: Add S3C24xx dependencies for Simtec machinesMark Brown
No point in building them for S3C64xx, certainly no sense in running into build issues there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-26davinci: EDMA: multiple CCs, channel mapping and API changesSudhakar Rajashekhara
- restructure to support multiple channel controllers by using additional struct resources for each CC - interface changes visible to EDMA clients Introduce macros to build IDs from controller and channel number, and to extract them. Modify the edma_alloc_slot function to take an extra argument for the controller. Also update ASoC drivers to use API. ASoC changes Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> - Move queue related mappings to dm<soc>.c EDMA in DM355 and DM644x has two transfer controllers while DM646x has four transfer controllers. Moving the queue to tc mapping and queue priority mapping to dm<soc>.c will be helpful to probe these mappings from platform device so that the machine_is_* testing will be avoided. - add channel mapping logic Channel mapping logic is introduced in dm646x EDMA. This implies that there is no fixed association for a channel number to a parameter entry number. In other words, using the DMA channel mapping registers (DCHMAPn), a PaRAM entry can be mapped to any channel. While in the case of dm644x and dm355 there is a fixed mapping between the EDMA channel and Param entry number. Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-25ASoC: SDP3430: Fix TWL GPIO6 pin mux requestCandelaria Villareal, Jorge
Fix the write to PMBR1 register through I2C. Also, the constant which holds the value to write is now called TWL4030_GPIO6_PWM0_MUTE. This name is based on TRM to avoid confusion. Signed-off-by: Jorge Eduardo Candelaria <x0107209@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-25ASoC: S3C platform: Fix s3c2410_dma_started() called at improper timeShine Liu
s3c24xx dma has the auto reload feature, when the the trnasfer is done, CURR_TC(DSTAT[19:0], current value of transfer count) reaches 0, and DMA ACK becomes 1, and then, TC(DCON[19:0]) will be loaded into CURR_TC. So the transmission is repeated. IRQ is issued while auto reload occurs. We change the DISRC and DCON[19:0] in the ISR, but at this time, the auto reload has been performed already. The first block is being re-transmitted by the DMA. So we need rewrite the DISRC and DCON[19:0] for the next block immediatly after the this block has been started to be transported. The function s3c2410_dma_started() is for this perpose, which is called in the form of "s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STARTED);" in s3c24xx_pcm_trigger(). But it is not correct. DMA transmission won't start until DMA REQ signal arrived, it is the time s3c24xx_snd_txctrl(1) or s3c24xx_snd_rxctrl(1) is called in s3c24xx_i2s_trigger(). In the current framework, s3c24xx_pcm_trigger() is always called before s3c24xx_pcm_trigger(). So the s3c2410_dma_started() should be called in s3c24xx_pcm_trigger() after s3c24xx_snd_txctrl(1) or s3c24xx_snd_rxctrl(1) is called in this function. However, s3c2410_dma_started() is dma related, to call this function we should provide the channel number, which is given by substream->runtime->private_data->params->channel. The private_data points to a struct s3c24xx_runtime_data object, which is define in s3c24xx_pcm.c, so s3c2410_dma_started() can't be called in s3c24xx_i2s.c Fix this by moving the call to signal the DMA started to the DAI drivers. Signed-off-by: Shine Liu <liuxian@redflag-linux.com> Signed-off-by: Shine Liu <shinel@foxmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-25ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stopJarkko Nikula
Functionality of functions omap_mcbsp_xmit_enable and omap_mcbsp_recv_enable can be merged into omap_mcbsp_start and omap_mcbsp_stop since API of those omap_mcbsp_start and omap_mcbsp_stop was changed recently allowing to start and stop individually the transmitter and receiver. This cleans up the code in arch/arm/plat-omap/mcbsp.c and in sound/soc/omap/omap-mcbsp.c which was the only user for those removed functions. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-25ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAIJarkko Nikula
Commit ca6e2ce08679c094878d7f39a0349a7db1d13675 is setting up few XCCR and RCCR bits for I2S and DPS_A formats. Part of the bits are already set for all formats and I believe that XDISABLE and RDISABLE bits are format independent. As XCCR and RCCR are found only from OMAP2430 and OMAP34xx, I move setup of XDISABLE and RDISABLE to where those cpu's are tested and remove format dependent part for simplicity. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-24Merge branch 'topic/digital-mixing' into for-2.6.32Mark Brown
2009-08-24ASoC: Select core DMA when building for S3C64xxMark Brown
Ensure that the core DMA support is available when building for S3C64xx. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-24ASoC: Remove unneeded inclusion of linux/regulator/consumer.hTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24ASoC: add missing inclusion of debugfs.hTakashi Iwai
To fix compile errors. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-23ASoC: Pass correct platform data from pxa2xx-ac97Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-23ASoC: free socdev if init_card() fails in wm9705_soc_probe()Roel Kluin
Free socdev if snd_soc_init_card() fails. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add DAPM widget power decision debugfs filesMark Brown
Currently when built with DEBUG DAPM will dump information about the power state decisions it is taking for each widget to dmesg. This isn't an ideal way of getting the information - it requires a kernel build to turn it on and off and for large hub CODECs the volume of information is so large as to be illegible. When the output goes to the console it can also cause a noticable impact on performance simply to print it out. Improve the situation by adding a dapm directory to our debugfs tree containing a file per widget with the same information in it. This still requires a decision to build with debugfs support but is easier to navigate and much less intrusive. In addition to the previously displayed information active streams are also shown in these files. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add FSI-AK4642 sound support for SuperHKuninori Morimoto
This patch is tested by ms7724se Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add ak4642/ak4643 codec supportKuninori Morimoto
This is very simple driver for ALSA It supprt headphone output and stereo input only This patch is tested by ms7724se Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: S3C24XX: Support for Simtec Hermes boardsBen Dooks
Add support for the tlv320aic3x CODEC on the Simtec Hermes board. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: tlv320aic3x: fixup board device changesBen Dooks
Fixup the device changes by modifying the files that we just removed the explicit device creation from with i2c_register_board_info() until this can be moved into the relevant board files. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: tlv320aic3x: Change to use device modelBen Dooks
The tlv320aic3x driver managed its own i2c device, instead of an extant one created by the board support code. Change the code to make it so that the driver binds to an extant (in this case i2c) device. Add explict tlv320aic33 as well as tlv320aic3x to the supported device table and remove the old driver bindings from the users of this code. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boardsBen Dooks
Add core support for the range of S3C24XX Simtec boards with TLV320AIC23 CODECs on them. Since there are also boards with similar IIS routing the AMP and the configuration code is placed in a core file for re-use with other CODEC bindings. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: OMAP: Use DMA operating mode of McBSPEduardo Valentin
Configures DMA sync mode depending on McBSP operating mode value. The value is configurable by McBSP instance. So, depending on McBSP operating mode, the DMA sync mode is passed from omap-mcbsp to omap-pcm. Besides that, it also configures McBSP threshold value depending on which McBSP mode is activated. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: OMAP: Use McBSP threshold to playback and captureEduardo Valentin
This patch changes the way DMA is done in omap-pcm.c in order to reduce power consumption. There is no need to have so much SW control in order to have DMA in idle state during audio streaming. Configuring McBSP threshold value and DMA to FRAME_SYNC are sufficient. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: Always syncronize audio transfers on framesEero Nurkkala
All these steps are required for ASoC to behave correctly. rccr and xccr are format dependent, for example TDM audio has different values than I2S or DSP_A. Also the omap_mcbsp_xmit_enable and/or omap_mcbsp_recv_enable must be called right after the DMA has started. This provides no longer L and R channels switching at random. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: Add runtime check for RFIG and XFIGEero Nurkkala
This is, no RFIG or XFIG (Not defined in 34xx), correct initiliazation of rccr and xccr. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: OMAP: Make DMA 64 alignedEduardo Valentin
Align DMA address to DMA burst transaction sizes. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: OMAP: Enable DMA burst modeEduardo Valentin
Improve DMA transfers by enabling Burst transaction. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: Add SuperH FSI driver support for ALSAKuninori Morimoto
This driver is very simple. It support playback only now. This patch is tested by ms7724se board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: S3C24XX : Align the peroid size to the buffer sizeShine Liu
> Then it's a driver bug. If unaligned period size is allowed, it means > that the irq is really generated in that period, not at the buffer > boundary. Otherwise, it must have a proper hw-constraint to align the > period size to the buffer size. This patch will fix the bug metioned in the above mail. Force the peroid size to be aligned with the buffer size. Based and tested on linux-2.6.31-rc6. Signed-off-by: Shine Liu <shinel@foxmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>