aboutsummaryrefslogtreecommitdiff
path: root/sound/usb/usbmixer.c
AgeCommit message (Collapse)Author
2008-01-31[ALSA] usb-audio - SB Live24-External better handlingTimofei Bondarenko
This patch improves support for 'SB Live 24-bit Extarnal' USB card. 1) This card can go into muted state when a headphones connected or disconnected. So notify mixer about changes in headphone jack. 2) Add LED controls and procfs support just as in similar Audigy 2 NX card. 3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality: the card may adjust microphone input level only. Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] fix selector unit bug affecting some USB speakerphonesRuss Cox
Following the suggestion in this thread: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/26683 the correct upper bound on desc[0] is 5 + num_ins not 6 + num_ins, because the index used later is 5+i, not 6+i. This change makes my Vosky Chatterbox speakerphone work. Apparently it also helps with the Minivox MV100. Signed-off-by: Russ Cox <rsc@swtch.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Clean up with common snd_ctl_boolean_*_info callbacksTakashi Iwai
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-16[ALSA] usbaudio - Coping with short replies in usbmixerThomas Reitmayr
This patch makes sure that short USB replies are treated as an error when requesting the value of a certain mixer control. Signed-off-by: Thomas Reitmayr <thomas@devbase.at> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-01-09[ALSA] usb: usbmixer error path fixMariusz Kozlowski
Without the patch below namelist[0] will not be freed in case of kmalloc error. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-01usb: usbmixer free kill urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-23[ALSA] Add TLV support to snd-usb-audio driverTakashi Iwai
Added TLV-read support to snd-usb-audio driver for passing the volume dB scale information to user-space. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-22[ALSA] add support for SB Live! 24-Bit External remote controlRaimonds Cicans
This patch rewrites the remote control code to use a table for the peculiarities of the various SB models, and adds support for a third model. Signed-off-by: Raimonds Cicans <ray@vardes.lv> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22[ALSA] Remove unneeded read/write_size fields in proc text opsTakashi Iwai
Remove unneeded read/write_size fields in proc text ops. snd_info_set_text_ops() is fixed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Test volume resolution of usb audio at initializationTakashi Iwai
Test the volume of usb audio whether actually it works and adjusts the resolution value according to it. Some USB audio devices report a lower resolution than it reacts. The only possible check is to write and read a volume value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] fix resource leak in usbmixerJesper Juhl
Modules: USB generic driver We may leak 'namelist' in sound/usb/usbmixer.c::parse_audio_selector_unit() Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] fix usbmixer double kfreeDave Jones
Modules: USB generic driver snd_ctl_add() kfree's the kcontrol already if we fail there, so this driver is currently doing a double kfree. Coverity bug #959 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] Remove xxx_t typedefs: USB-AudioTakashi Iwai
Modules: USB generic driver Remove xxx_t typedefs from the USB-Audio driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-04[ALSA] Add missing KERN_* prefixTakashi Iwai
Modules: ALSA<-OSS emulation,USB generic driver,USB USX2Y Added missing KERN_* prefix to printk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] Replace with kzalloc() - othersTakashi Iwai
Documentation,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,OPL3 OPL4,Digigram VX core,I2C cs8427,I2C lib core,I2C tea6330t,L3 drivers AK4114 receiver,AK4117 receiver,PDAudioCF driver,PPC PMAC driver SPARC AMD7930 driver,SPARC cs4231 driver,Synth,Common EMU synth USB generic driver,USB USX2Y Replace kcalloc(1,..) with kzalloc(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-07-27[PATCH] clean up inline static vs static inlineJesper Juhl
`gcc -W' likes to complain if the static keyword is not at the beginning of the declaration. This patch fixes all remaining occurrences of "inline static" up with "static inline" in the entire kernel tree (140 occurrences in 47 files). While making this change I came across a few lines with trailing whitespace that I also fixed up, I have also added or removed a blank line or two here and there, but there are no functional changes in the patch. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22[ALSA] Remove redundant NULL checks before kfreeJesper Juhl
Timer Midlevel,ALSA sequencer,ALSA<-OSS sequencer,Digigram VX core I2C tea6330t,GUS Library,VIA82xx driver,VIA82xx-modem driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,YMFPCI driver Digigram VX Pocket driver,Common EMU synth,USB generic driver,USB USX2Y Checking a pointer for NULL before calling kfree() on it is redundant, kfree() deals with NULL pointers just fine. This patch removes such checks from sound/ This patch also makes another, but closely related, change. It avoids casting pointers about to be kfree()'ed. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] usb-audio - add a proc file for Audigy 2 NX jack statusClemens Ladisch
USB generic driver This patch adds a proc file for the SB Audigy 2 NX which shows the connection status of the various jacks. Unfortunately, no SPDIF input frequency (yet). Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - remove superfluous LIRC ioctlsClemens Ladisch
USB generic driver The ioctls for LIRC compatibility can be removed because the infrastructure and detection stuff is better done in user space. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - Audigy 2 NX blinkenlightsClemens Ladisch
USB generic driver Adds mixer controls for the CMSS/Dolby Digital/Power LEDs on the SB Audigy 2 NX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - make SB remote control device LIRC compatibleClemens Ladisch
USB generic driver Add ioctls to the Sound Blaster remote control hwdep device so that it can be used with LIRC. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - allow type 0 extension unitsClemens Ladisch
USB generic driver Extension units can have type 0, so do not ignore them when constructing mixer controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - cache vendor/product IDsClemens Ladisch
USB generic driver Cache the decoded values of idVendor/idProduct to get rid of most of those ugly le16_to_cpu() calls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - add Extigy/Audigy 2 NX remote control supportClemens Ladisch
ALSA Core,USB generic driver Add an hwdep interface that supports reading remote control data from Sound Blaster Extigy and Audigy 2 NX devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - add mixer control notificationsClemens Ladisch
USB generic driver Add support for the optional status interrupt endpoint in audio control interfaces, and translate USB status notifications into ALSA mixer control notifications. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - move mixer data into separate structClemens Ladisch
USB generic driver Move all data related to audio control interfaces into a separate struct local to usbmixer.c. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - reduce size of unitbitmap arrayClemens Ladisch
USB generic driver Unit/terminal IDs are 8-bit integers, so the unitbitmap variable does not need to be bigger than 256 bits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - add selector unit names override for Audigy 2 NXClemens Ladisch
USB generic driver Add a mechanism to specify source names of selector units, and add such names for the SB Audigy 2 NX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!