aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2009-06-10Merge branch 'topic/caiaq' into for-linusTakashi Iwai
* topic/caiaq: ALSA: snd_usb_caiaq: bump version number ALSA: snd_usb_caiaq: give better shortname ALSA: Core - add snd_card_set_id() function ALSA: snd_usb_caiaq: give better longname ALSA: snd_usb_caiaq: use strlcpy ALSA: snd_usb_caiaq: clean whitespaces
2009-06-10Merge branch 'topic/ca0106' into for-linusTakashi Iwai
* topic/ca0106: ALSA: ca0106 - Fix master volume scale ALSA: ca0106 - Add missing card->mixername field setup ALSA: ca0106 - Add missing registrations of vmaster controls
2009-06-10Merge branch 'topic/au88x0' into for-linusTakashi Iwai
* topic/au88x0: ALSA: au88x0: fix wrong period_elapsed() call ALSA: au88x0: fix .pointer callback
2009-06-10Merge branch 'topic/asoc' into for-linusTakashi Iwai
* topic/asoc: (135 commits) ASoC: Apostrophe patrol ASoC: codec tlv320aic23 fix bogus divide by 0 message ASoC: fix NULL pointer dereference in soc_suspend() ASoC: Fix build error in twl4030.c ASoC: SSM2602: assign last substream to the master when shutting down ASoC: Blackfin: document how anomaly 05000250 is handled ASoC: Blackfin: set the transfer size according the ac97_frame size ASoC: SSM2602: remove unsupported sample rates ASoC: TWL4030: Check the interface format for 4 channel mode ASoC: TWL4030: Use reg_cache in twl4030_init_chip ASoC: Initialise dev for the dummy S/PDIF DAI ASoC: Add dummy S/PDIF codec support ASoC: correct print specifiers for unsigneds ASoC: Modify mpc5200 AC97 driver to use V9 of spin_event_timeout() ASoC: Switch FSL SSI DAI over to symmetric_rates ASoC: Mark MPC5200 AC97 as BROKEN until PowerPC merge issues are resolved ASoC: Fabric bindings for STAC9766 on the Efika ASoC: Support for AC97 on Phytec pmc030 base board. ASoC: AC97 driver for mpc5200 ASoC: Main rewite of the mpc5200 audio DMA code ...
2009-06-08ALSA: ca0106 - Fix master volume scaleTakashi Iwai
The master volume dB scale was wrongly defined as 0.50dB setp while it must be 0.25dB step. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-06ASoC: Apostrophe patrolMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-06ASoC: codec tlv320aic23 fix bogus divide by 0 messageTroy Kisky
Some code analyzer software mistakenly gives divide by 0 error messages for these lines. This patch will end its confusion. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-04ASoC: fix NULL pointer dereference in soc_suspend()Daniel Mack
In case the initalization of an soc_device failed, there is no codec associated with it. soc_suspend() will still dereference the pointer and cause an Ooops when entering the sleep mode. This happens on our board with a multi-target kernel image when booted on a machine without audio circuits. This patch makes the code bail out very early in this special case. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-04ASoC: Fix build error in twl4030.cTakashi Iwai
Fix the (likely cut-n-paste) error by commit 16a30fbb0d3aa4ee829a2dd3d0e314e2b5ae96a9, which causes the error below: sound/soc/codecs/twl4030.c: In function 'twl4030_read_reg_cache': sound/soc/codecs/twl4030.c:152: error: 'cache' undeclared (first use in this function) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-03ASoC: SSM2602: assign last substream to the master when shutting downCliff Cai
Fixes crash when shutting down. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-03ASoC: Blackfin: document how anomaly 05000250 is handledSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-03ASoC: Blackfin: set the transfer size according the ac97_frame sizeCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-03ASoC: SSM2602: remove unsupported sample ratesCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-02ALSA: ca0106 - Add missing card->mixername field setupTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: snd_usb_caiaq: bump version numberDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: snd_usb_caiaq: give better shortnameDaniel Mack
If not passed as module option, provide an own card ID with the newly introduced snd_set_card_id() call. This will prevent ALSA from calling choose_default_name() which only takes the last part of a name containing whitespaces. This for example caused 'Audio 4 DJ' to be shortened to 'DJ', which was not very descriptive. The implementation now takes the short name and removes all whitespaces from it which is much nicer. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02Merge branch 'topic/core-id-check' into topic/caiaqTakashi Iwai
2009-06-02ALSA: Core - add snd_card_set_id() functionJaroslav Kysela
Introduce snd_card_set_id() function to allow lowlevel drivers to set default identification name for card slot. The function checks also for identification name collisions and tries to create unique name. Also, the snd_card_create() function is simplified, because this new function is used. As bonus, proper name collision checks are evaluated at the card create time. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: ca0106 - Add missing registrations of vmaster controlsTakashi Iwai
Although the vmaster controls are created, they aren't registered thus they don't appear in the real world. Added the missing snd_ctl_add() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-06-02ALSA: snd_usb_caiaq: give better longnameDaniel Mack
The serial number is of no interest in the longname, remove it. This gives space for the usb path information which is more informative. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: snd_usb_caiaq: use strlcpyDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: snd_usb_caiaq: clean whitespacesDaniel Mack
Cosmetic changes only, no code change. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-01ASoC: TWL4030: Check the interface format for 4 channel modePeter Ujfalusi
In addition to the operating mode check, also check the codec's interface format in case of four channel mode. If the codec is not in TDM (DSP_A) mode, return with error. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-29ASoC: TWL4030: Use reg_cache in twl4030_init_chipPeter Ujfalusi
Use the codec->reg_cache instead of the array directly in twl4030_init_chip for setting the default values. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-29ALSA: au88x0: fix wrong period_elapsed() callJaroslav Kysela
The period_elapsed() call should be called when position moves. The idea was taken from ALSA bug#4455. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29ALSA: au88x0: fix .pointer callbackJaroslav Kysela
Appearently, the used mask in the .pointer callback is invalid. It should be in period_bytes range. The period_bytes is pow(2), so simple bitwise operation is used. Idea was taken from ALSA bug#4455. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-28ASoC: Initialise dev for the dummy S/PDIF DAIMark Brown
Also include the header to make sure the DAI is prototyped. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-28ASoC: Add dummy S/PDIF codec supportChaithrika U S
McASP on DM646x can operate in DIT (S/PDIF) where no codec is needed. This patch provides stub codec that can be used in these configurations. On DM646x EVM the McASP1 is connected to the S/PDIF out. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-28Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - Compaq Presario CQ60 patching for Conexant
2009-05-28ASoC: correct print specifiers for unsignedsRoel Kluin
Unsigned variables should use `%u' rather than `%d'. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-28ALSA: hda - Compaq Presario CQ60 patching for ConexantTony Vroon
A docking mic control is shown by default. The Compaq Presario CQ60 laptop has no docking connector, so designate it as a CXT5051_HP model. This makes the phantom mixer slider disappear. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-27ASoC: Modify mpc5200 AC97 driver to use V9 of spin_event_timeout()Jon Smirl
The function signature for spin_event_timeout() has changed in version V9. Adjust the mpc5200 AC97 driver to use the new function. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-27Merge branch 'fix/pcm-jiffies-check' into for-linusTakashi Iwai
* fix/pcm-jiffies-check: ALSA: Enable PCM hw_ptr_jiffies check only in xrun_debug mode ALSA: Fix invalid jiffies check after pause
2009-05-27Merge branch 'fix/misc' into for-linusTakashi Iwai
* fix/misc: sound: usb-audio: make the MotU Fastlane work again
2009-05-27ASoC: Switch FSL SSI DAI over to symmetric_ratesMark Brown
The effect of symmetric_constraints should provide a standard way to enforce the use of the same sample rate for both directions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Timur Tabi <timur@freescale.com>
2009-05-27sound: usb-audio: make the MotU Fastlane work againClemens Ladisch
Kernel 2.6.18 broke the MotU Fastlane, which uses duplicate endpoint numbers in a manner that is not only illegal but also confuses the kernel's endpoint descriptor caching mechanism. To work around this, we have to add a separate usb_set_interface() call to guide the USB core to the correct descriptors. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: David Fries <david@fries.net> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-27ALSA: Enable PCM hw_ptr_jiffies check only in xrun_debug modeTakashi Iwai
The PCM hw_ptr jiffies check results sometimes in problems when a hardware doesn't give smooth hw_ptr updates. So far, au88x0 and some other drivers appear not working due to this strict check. However, this check is a nice debug tool, and the capability should be still kept. Hence, we disable this check now as default unless the user enables it by setting the xrun_debug mode to the specific stream via a proc file. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-27ALSA: Fix invalid jiffies check after pauseTakashi Iwai
The hw_ptr_jiffies has to be reset properly to avoid the invalid check of jiffies delta in snd_pcm_update_hw_ptr*() functions. Especailly this patch fixes the bogus jiffies check after the puase and resume. This patch is a modified version of the original patch by Jaroslav. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-26ASoC: Mark MPC5200 AC97 as BROKEN until PowerPC merge issues are resolvedMark Brown
These drivers use spin_event_timeout() which is only present in the PowerPC tree at present and which is undergoing some API revisions so temporarily mark them as BROKEN until these issues are sorted out. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26ASoC: Fabric bindings for STAC9766 on the EfikaJon Smirl
Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26ASoC: Support for AC97 on Phytec pmc030 base board.Jon Smirl
A wm9712 AC97 codec is used. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26ASoC: AC97 driver for mpc5200Jon Smirl
I've implemented retries for when the AC97 hardware doesn't reset on first try. About 10% of the time both the Efika and pcm030 AC97 codecs don't reset on first try and need to be poked multiple times. Failure is indicated by not having the link clock start ticking. Every once in a while even five pokes won't get the link started and I have to power cycle. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26ASoC: Main rewite of the mpc5200 audio DMA codeJon Smirl
Rewrite the mpc5200 audio DMA code to support both I2S and AC97. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add missing check of pin vref 50 and others in Realtek codecs ALSA: hda - Add 5stack-no-fp model for STAC927x ALSA: hda - Add forced codec-slots for ASUS W5Fm
2009-05-25ASoC: TWL4030: HandsfreeL/R mute DAPM switchPeter Ujfalusi
Add DAPM switch for HeadsetL/R mute. Since all bits are are needed for the HFL/R pop removal to work the switch is using the SW_SHADOW no HW register for the HandsfreeL/R mute. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-25ASoC: TWL4030: Add shadow registerPeter Ujfalusi
Shadow, non HW register for dealing with the HandsfreeL/R muting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-25ASoC: TWL4030: Handsfree pop removal redesignPeter Ujfalusi
Move the HandsfreeL/R (IHFL/R) pop removal code from the DAPM_MUX_E to a more appropriate DAPM_PGA_E widget. Also fix the power-up sequence to match with the TRM. The power-down sequence is not described in the TRM, so do it in a way, which seams like the correct sequence. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-25ALSA: hda - Add missing check of pin vref 50 and others in Realtek codecsTakashi Iwai
Some Realtek codecs like ALC861 seem to support only VREF50 while the current driver assumes it's only VREF80. Check other VREF bits to set the correct value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-24ASoC: Rename the PSC functions to DMAJon Smirl
Rename the functions in the mpc5200 DMA file from i2s based names to dma ones to reflect the file they are in. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-24ASoC: Basic split of mpc5200 DMA code out of mpc5200_psc_i2sJon Smirl
Basic split of mpc5200 DMA code out from i2s into a standalone file. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-04 00:52:21 +0000