aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2009-09-02ALSA: hda - Fix obsolete CONFIG_SND_DEBUG_DETECTTakashi Iwai
Fix the old dead CONFIG_SND_DEBUG_DETECT to CONFIG_SND_DEBUG_VERBOSE. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-01ASoC: Debugged improper setting of PLL fields in WM8580 driverjassi brar
Bug was caught while trying to use WM8580 as I2S master on SMDK. Symptoms were lesser LRCLK read by CRO(41.02 instead of 44.1 KHz) Solved by referring to WM8580A manual and setting mask value correctly and making the code to not touch 'reserved' bits of PLL4 register. Signed-off-by: Jassi <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-01ASoC: new board driver to connect bfin-5xx with ad1836 codecBarry Song
As discussed, the patch uses the original TDM order without rewriting. For the match between TDM slot number and audio channel number, a new API need be added. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-01ALSA: hda - Unmute docking line-out as default with AD1984A codecTakashi Iwai
Unmute the docking-station line-out as default on machines with AD1984A codec chip. It can be still muted via "Dock" mixer switch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-01ALSA: hda - Add another entry for Nvidia HDMI deviceTakashi Iwai
Added another entry for Nvidia HDMI device (10de:0003). Reference: kernel bug#14097 http://bugzilla.kernel.org/show_bug.cgi?id=14097 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-01sound: oxygen: fix MCLK rate for 192 kHz playbackClemens Ladisch
Do not forget to program the MCLK ratio for the I2S output. Otherwise, the master clock frequency can be too high for the DACs at sample frequencies above 96 kHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889A ALSA: hda - Add missing mux check for VT1708
2009-08-31ALSA: allocation may fail in snd_pcm_oss_change_params()Roel Kluin
Allocation may fail, show if it did. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> [Additional fix for invalid runtime->oss.prepare flag set by tiwai] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31ALSA: hda - Add missing GPIO initialization for AD1984A laptop modelTakashi Iwai
A similar initialization of GPIO1 pin like mobile model is needed for laptop model, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31ALSA: hda - Add support of docking auto-mute/mic for AD1984A laptop modelTakashi Iwai
Add the support of automatic mute and mic-switching of the docking station HP and mic plugs for AD1984A laptop model for some HP machines. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31Merge branch 'fix/hda' into topic/hdaTakashi Iwai
Conflicts: sound/pci/hda/patch_realtek.c
2009-08-31ALSA: hda - Fix ALC268/ALC269 headphone pin routingTakashi Iwai
Fix the headphone pin routing of ALC268/ALC269 codecs. Using alc882 routine doesn't work because alc268/alc269 parser assumes the independent DACs for both HP and speaker outputs. Need to assign the DAC depending on the pin. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889ATakashi Iwai
This patch fixes the wrong headphone output routing for MacBookPro 3,1/4,1 quirk with ALC889A codec, which caused the silent headphone output. Also, this gives the individual Headphone and Speaker volume controls. Reference: kernel bug#14078 http://bugzilla.kernel.org/show_bug.cgi?id=14078 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-08-31ALSA: hda - Add missing mux check for VT1708Takashi Iwai
In patch_vt1708(), the check of MUX nids is missing and this results in the -EINVAL error in accessing Input Source mixer element. Simpliy adding the call of get_mux_nids() fixes the problem. Reference: Novell bnc#534904 https://bugzilla.novell.com/show_bug.cgi?id=534904 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-29ALSA: hda - Create "Digital Mic Capture Volume" correctly for IDT codecsTakashi Iwai
So far, the digital mic capture volume wasn't created. This is because IDT codecs have output amps for digital mics, not input amps, while input amps should be used for other analog pins. Thus the automatic capture volume creation should check both directions for digital mics. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-28ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAIJarkko Nikula
The McBSP1 port in OMAP3 processors (I believe OMAP2 too but I don't have specifications to check it) have additional CLKR and FSR pins for McBSP1 receiver. Reset default is that receiver is using bit clock and frame sync signal from those pins but it is possible to configure to use also CLKX and FSX pins as well. In fact, other McBSP ports are doing that internally that transmitter and receiver share the CLKX and FSX. Add functionaly that machine drivers can set the CLKR and FSR sources by using the snd_soc_dai_set_sysclk. Thanks to "Aggarwal, Anuj" <anuj.aggarwal@ti.com> for reporting the issue. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-28ASoC: davinci: i2c device creation moved into board filesChaithrika U S
Also, the codec setup data structure has to remain for successful probe. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-27ALSA: Add debug module optionTakashi Iwai
Add debug module option to snd core. This controls the debug print level. When CONFIG_SND_DEBUG_VERBOSE is set, you can suppress the debug messages by giving or changing this parameter to a lower value. debug=0 means no debug messsages. As default, it's set to the verbose level 2. Since this option can be changed dynamically via sysfs file, you can suppress the verbose debug messages on the fly, which wasn't possible before. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-27ALSA: hda - Add more quirk for HP laptops with AD1984ATakashi Iwai
More entries for HP laptops to get them working properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-27ALSA: core - strip too long file names in snd_print*()Takashi Iwai
When modules are built with M= option, they pass long file paths to __FILE__. This results in ugly outputs of snd_print*() when CONFIG_SND_VERBOSE_PRINTK is set. This patch adds a check of the path and strips the leading path dirs if the file name is an absolute path to improve the readability of logs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-26ASoC: Don't reconfigure WM8350 FLL if not neededMark Brown
If the requested FLL configuration is the one we're currently running in it's at best pointless to reconfigure the FLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-26ASoC: Fix s3c-i2s-v2 buildMark Brown
We now need the PCM header to kick the DMA. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-26ASoC: Make platform data optional for TLV320AIC3xMark Brown
Now that we don't need the I2C address for the device the platform data is redundant so allow it to be omitted. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Chaithrika U S <chaithrika@ti.com>
2009-08-26ASoC: Add S3C24xx dependencies for Simtec machinesMark Brown
No point in building them for S3C64xx, certainly no sense in running into build issues there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-26sound: vwsnd: Fix setting of cfgval and ctlval in li_setup_dma()Roel Kluin
Since !LI_CCFG_* evaluates to 0, this did not change anything to cfgval and ctlval. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ASoC: SDP3430: Fix TWL GPIO6 pin mux requestCandelaria Villareal, Jorge
Fix the write to PMBR1 register through I2C. Also, the constant which holds the value to write is now called TWL4030_GPIO6_PWM0_MUTE. This name is based on TRM to avoid confusion. Signed-off-by: Jorge Eduardo Candelaria <x0107209@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-25Merge branch 'fix/misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: pcm_lib: fix unsorted list constraint handling sound: vx222: fix input level control range check ALSA: ali5451: fix timeout handling in snd_ali_{codecs,timer}_ready()
2009-08-25ALSA: hda - Add full audio support on Acer Aspire 7730G notebookDenis Kuplyakov
1) Added support of internal subwoofer (it sounds!!!) 2) Auto muting front speakers and internal subwoofer on headphones plug. 3) Internal mic works. 4) 3 channel mods (jack maps): black pink blue 2ch: front ext mic line in 4ch: front ext mic surround 6ch: front CLFE surround Can be changed in mixer. 5) Sound can be recorded from: Internal mic Ext mic Cd Line in 6) 2 separate capture channels. Signed-off-by: Denis Kuplyakov <dener.kup@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC662Takashi Iwai
The last patch in this series is for ALC662; pretty similar as the previous patch for ALC861-VD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC861-VDTakashi Iwai
One more patch to give a better name for the primary output controls, this time for ALC861-VD codec. The change is simple, just checking the pin connection whether it's a speaker-out. When both speaker and HP are assigned, we name the volume as "PCM" as this influences on both outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC262Takashi Iwai
Similar improvements for ALC262 codec like previous two commits: assign a better name, either Master or Speaker, for the primary output controls. However, in the case of ALC262 codec, the necessary changes are larger than others because we need to check the possibility of different mixer amps depending on the pins. The pin 0x16 is mono, and bound with the dedicated mixer 0x0e while other pins are bound with 0x0c. Thus, there are two possible volumes. When only one of them is used, we can name it as "Master". OTOH, when both are used at the same time, they have to be named uniquely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC260Takashi Iwai
Instead of fixed "Front" mixer name, try to assign a better name, e.g. "Master" or "Speaker" fot the primary output volume controls of ALC260 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC880Takashi Iwai
When there is only one DAC is used for ALC880, try to assign a better name, either Speaker or Front, depending on the output pin type. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ASoC: S3C platform: Fix s3c2410_dma_started() called at improper timeShine Liu
s3c24xx dma has the auto reload feature, when the the trnasfer is done, CURR_TC(DSTAT[19:0], current value of transfer count) reaches 0, and DMA ACK becomes 1, and then, TC(DCON[19:0]) will be loaded into CURR_TC. So the transmission is repeated. IRQ is issued while auto reload occurs. We change the DISRC and DCON[19:0] in the ISR, but at this time, the auto reload has been performed already. The first block is being re-transmitted by the DMA. So we need rewrite the DISRC and DCON[19:0] for the next block immediatly after the this block has been started to be transported. The function s3c2410_dma_started() is for this perpose, which is called in the form of "s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STARTED);" in s3c24xx_pcm_trigger(). But it is not correct. DMA transmission won't start until DMA REQ signal arrived, it is the time s3c24xx_snd_txctrl(1) or s3c24xx_snd_rxctrl(1) is called in s3c24xx_i2s_trigger(). In the current framework, s3c24xx_pcm_trigger() is always called before s3c24xx_pcm_trigger(). So the s3c2410_dma_started() should be called in s3c24xx_pcm_trigger() after s3c24xx_snd_txctrl(1) or s3c24xx_snd_rxctrl(1) is called in this function. However, s3c2410_dma_started() is dma related, to call this function we should provide the channel number, which is given by substream->runtime->private_data->params->channel. The private_data points to a struct s3c24xx_runtime_data object, which is define in s3c24xx_pcm.c, so s3c2410_dma_started() can't be called in s3c24xx_i2s.c Fix this by moving the call to signal the DMA started to the DAI drivers. Signed-off-by: Shine Liu <liuxian@redflag-linux.com> Signed-off-by: Shine Liu <shinel@foxmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-25ALSA: hda - Generalize input pin parsing in patch_realtek.cTakashi Iwai
Provide a standard parser for input pins to create the input mixer and input source controls instead of having a difference one for each Realtek codec. The new helper parses the codec connections dynamically isntead of fixed indicies. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stopJarkko Nikula
Functionality of functions omap_mcbsp_xmit_enable and omap_mcbsp_recv_enable can be merged into omap_mcbsp_start and omap_mcbsp_stop since API of those omap_mcbsp_start and omap_mcbsp_stop was changed recently allowing to start and stop individually the transmitter and receiver. This cleans up the code in arch/arm/plat-omap/mcbsp.c and in sound/soc/omap/omap-mcbsp.c which was the only user for those removed functions. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-25ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAIJarkko Nikula
Commit ca6e2ce08679c094878d7f39a0349a7db1d13675 is setting up few XCCR and RCCR bits for I2S and DPS_A formats. Part of the bits are already set for all formats and I believe that XDISABLE and RDISABLE bits are format independent. As XCCR and RCCR are found only from OMAP2430 and OMAP34xx, I move setup of XDISABLE and RDISABLE to where those cpu's are tested and remove format dependent part for simplicity. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-25sound: pcm_lib: fix unsorted list constraint handlingClemens Ladisch
snd_interval_list() expected a sorted list but did not document this, so there are drivers that give it an unsorted list. To fix this, change the algorithm to work with any list. This fixes the "Slave PCM not usable" error with USB devices that have multiple alternate settings with sample rates in decreasing order, such as the Philips Askey VC010 WebCam. http://bugzilla.kernel.org/show_bug.cgi?id=14028 Reported-and-tested-by: Andrzej <adkadk@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24Merge branch 'topic/digital-mixing' into for-2.6.32Mark Brown
2009-08-24ASoC: Select core DMA when building for S3C64xxMark Brown
Ensure that the core DMA support is available when building for S3C64xx. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-24ALSA: hda - Reuse ALC268 parser for ALC269Takashi Iwai
Reuse a part of the code of ALC268 parser for ALC269. This will change the default output volume either to Front or Speaker depending on the pin configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24sound: vx222: fix input level control range checkClemens Ladisch
Fix a logic error in the range check of the input level control that would prevent setting any volume less than the maximum. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24ALSA: hda: move open coded tricks into get_wcaps_channels()Wu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24ASoC: Remove unneeded inclusion of linux/regulator/consumer.hTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24ASoC: add missing inclusion of debugfs.hTakashi Iwai
To fix compile errors. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-23ASoC: Pass correct platform data from pxa2xx-ac97Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-23ALSA: ali5451: remove dead codeBartlomiej Zolnierkiewicz
Remove code covered by #if/endif 0 and #ifdef/endif CODEC_RESET (CODEC_RESET is never defined). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-23ALSA: ali5451: fix timeout handling in snd_ali_{codecs,timer}_ready()Bartlomiej Zolnierkiewicz
Modify loops in such way that the register value is checked also after the timeout condition, just in case the heavy interrupt load etc. caused the thread to sleep for the time period exceeding the timeout value. While at it remove an extra ALI_STIMER read from snd_ali_stimer_ready(). Reported-by: Jack Byer <ojbyer@usa.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-23ASoC: free socdev if init_card() fails in wm9705_soc_probe()Roel Kluin
Free socdev if snd_soc_init_card() fails. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add DAPM widget power decision debugfs filesMark Brown
Currently when built with DEBUG DAPM will dump information about the power state decisions it is taking for each widget to dmesg. This isn't an ideal way of getting the information - it requires a kernel build to turn it on and off and for large hub CODECs the volume of information is so large as to be illegible. When the output goes to the console it can also cause a noticable impact on performance simply to print it out. Improve the situation by adding a dapm directory to our debugfs tree containing a file per widget with the same information in it. This still requires a decision to build with debugfs support but is easier to navigate and much less intrusive. In addition to the previously displayed information active streams are also shown in these files. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>