aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2009-03-19ASoC: Add FLL support for WM8400Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-19ALSA: hda - Don't reset stream at each prepare callbackTakashi Iwai
Don't reset the stream at each prepare callback but do it only once after the open. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: hda - Don't reset BDL unnecessarilyTakashi Iwai
So far, the prepare callback is called multiple times, BDL entries are reset and re-programmed at each time. This patch adds the check to avoid the reset of BDL entries when the same parameters are used. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: pcm - Fix delta calculation at boundary overlapTakashi Iwai
When the hw_ptr_interrupt reaches the boundary, it must check whether the hw_base was already lapped and corret the delta value appropriately. Also, rebasing the hw_ptr needs a correction because buffer_size isn't always aligned to period_size. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: pcm - Reset invalid position even without debug optionTakashi Iwai
Always reset the invalind hw_ptr position returned by the pointer callback. The behavior should be consitent independently from the debug option. Also, add the printk_ratelimit() check to avoid flooding debug prints. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: pcm - avoid unnecessary inlineTakashi Iwai
Remove unnecessary explicit inlininig of internal functions. Let compiler optimize. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: pcm - Fix a typo in error messagesTakashi Iwai
Fix a typo in error messages; forgotten after a copy&paste error. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: Echoaudio: add support for Indigo express cardsGiuliano Pochini
This patch adds support for IndigoIOx and IndigoDJx. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ASoC: Add separate AVDD for WM8400Mark Brown
There is an AVDD supply as well, normally one or more of the other upplies would be tied to it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-18ASoC: Further optimise WM8400 bias configuration sequenceMark Brown
The active discharge does not bring sufficient benefit to justify the lengthy times involved so don't do that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-18ALSA: snd-usb-caiaq: bump version numberDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: snd-usb-caiaq: drop bogus iso packetsDaniel Mack
Drop inbound packets that are smaller than expected. This has been observed at the very beginning of the streaming transaction. And when the hardware is in panic mode (which can only very rarely happen in case of massive EMI chaos), mute the input channels. Signed-off-by: Daniel Mack <daniel@caiaq.de> Tested-by: Mark Hills <mark@pogo.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: snd-usb-caiaq: only warn once on streaming errorsDaniel Mack
Limit the number of printed warnings to one in case of streaming errors. printk() happens to be expensive, especially in code called as often as here. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18Merge branch 'fix/opl3sa2-suspend' into for-linusTakashi Iwai
2009-03-18Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-03-18ALSA: Fix vunmap and free order in snd_free_sgbuf_pages()Takashi Iwai
In snd_free_sgbuf_pags(), vunmap() is called after releasing the SG pages, and it causes errors on Xen as Xen manages the pages differently. Although no significant errors have been reported on the actual hardware, this order should be fixed other way round, first vunmap() then free pages. Cc: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: mixart, fix lock imbalanceJiri Slaby
There is an omitted unlock in one snd_mixart_hw_params fail path. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: pcm_oss, fix locking typoJiri Slaby
s/mutex_lock/mutex_unlock/ on 2 fail paths in snd_pcm_oss_proc_write. Probably a typo, lock should be unlocked when leaving the function. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: oss-mixer - Fixes recording gain controlViral Mehta
At the time of initialization, SNDRV_MIXER_OSS_PRESENT_PVOLUME bit is not set for MIC (slot 7). So, the same should not be checked when an application tries to do gain control for audio recording devices. Just check slot->present for SNDRV_MIXER_OSS_PRESENT_CVOLUME independently. Verified with a simple application which opens /dev/dsp for recording and /dev/mixer for volume control. Have tested two usb audio mic devices. Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-03-18ALSA: snd-hda-intel - add checks for invalid values to *query_supported_pcm()Jaroslav Kysela
If ratesp or formatsp values are zero, wrong values are passed to ALSA's the PCM midlevel code. The bug is showed more later than expected. Also, clean a bit the code. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: hda - Workaround for buggy DMA position on ATI controllersTakashi Iwai
The position-buffer on ATI controllers are unreliable as well as on VIA chips, thus the same workaround for DMA position reading as VIA is useful for ATI. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: hda - Fix DMA mask for ATI controllersTakashi Iwai
ATI controllers (at least some SB0600 models) appear buggy to handle 64bit DMA. As a workaround, reset GCAP bit0 and let the driver to use only 32bit DMA on these controllers. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-17Merge branch 'pxa-ssp' into for-2.6.30Mark Brown
2009-03-17ALSA: drop outdated and broken sa11xx-uda1341 driverDmitry Artamonow
It depends on L3 support from 2.4 kernel (CONFIG_L3) that never got merged into mainline. Since there's no way to use it on any of supported machines (iPaq h3100 or h3600), better drop it for now. It can be reimplemented later using ASoC infrastructure (there's already a driver for uda1341 codec in mainline, so only CPU and machine parts need to be written). Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-17Merge branch 'topic/snd_card_new-err' into topic/drop-l3Takashi Iwai
2009-03-17ASoC: Only deregister AC97 dev if it's name was not "AC97"Atsushi Nemoto
The commit 14fa43f53ff3a9c3d8b9662574b7369812a31a97 ("ASoC: Only register AC97 bus if it's not done already") added a condition for calling of soc_ac97_dev_register() but not added for calling of soc_ac97_dev_unregister(). This patch adds same condition for soc_ac97_dev_unregister(). Without this fix, kernel crashes when unloading an asoc driver. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-17Merge branch 'fix/opl3sa2-suspend' into topic/isa-miscTakashi Iwai
2009-03-17ALSA: opl3sa2 - Fix NULL dereference when suspending snd_opl3sa2Krzysztof Helt
Fix the OOPS during a opl3sa2 card suspend and resume if the driver is loaded but the card is not found. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-17sh: dma: Make G2 DMA configurable.Paul Mundt
Follow the PVR2 DMAC change for G2 DMA. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16Rationalize fasync return valuesJonathan Corbet
Most fasync implementations do something like: return fasync_helper(...); But fasync_helper() will return a positive value at times - a feature used in at least one place. Thus, a number of other drivers do: err = fasync_helper(...); if (err < 0) return err; return 0; In the interests of consistency and more concise code, it makes sense to map positive return values onto zero where ->fasync() is called. Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-16Use f_lock to protect f_flagsJonathan Corbet
Traditionally, changes to struct file->f_flags have been done under BKL protection, or with no protection at all. This patch causes all f_flags changes after file open/creation time to be done under protection of f_lock. This allows the removal of some BKL usage and fixes a number of longstanding (if microscopic) races. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-16ALSA: hda - Fix ALC662 beep againTakashi Iwai
The previous commit breaks the (digital-) beep on ALC662. ALC662 has the connection index 0x05 while ALC662 and ALC272 have the index 0x04 for the beep widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-16ALSA: snd-hda-intel: Fix ALC662/ALC663 Beep Amplifier IndexJaroslav Kysela
ALC662/663 codecs have Beep Amplifier Index 0x04 not 0x05 in 0x0b NID. Confirmed by testing on real hardware. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-16ASoC: Each PXA AC97 DAI needs a separate opsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-16ASoC: Fix some missing dai_ops conversionsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-16ASoC: twl4030 - Fix build errorJoonyoung Shim
CC sound/soc/codecs/twl4030.o sound/soc/codecs/twl4030.c:1400: warning: braces around scalar initializer sound/soc/codecs/twl4030.c:1400: warning: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1401: error: field name not in record or union initializer sound/soc/codecs/twl4030.c:1401: error: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1401: warning: initialization from incompatible pointer type sound/soc/codecs/twl4030.c:1402: error: field name not in record or union initializer sound/soc/codecs/twl4030.c:1402: error: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1402: warning: excess elements in scalar initializer sound/soc/codecs/twl4030.c:1402: warning: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1403: error: field name not in record or union initializer sound/soc/codecs/twl4030.c:1403: error: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1403: warning: excess elements in scalar initializer sound/soc/codecs/twl4030.c:1403: warning: (near initialization for 'twl4030_dai.ops') Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-16ALSA: echoaudio: remove line-out volume from vmixer cardsGiuliano Pochini
With this patch the drivers do not set the vmixer volume anymore at startup because it is actually the output volume of the voices and ALSA mandates that the volume must be 0 by default. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-16ALSA: echoaudio: remove line-out volume from vmixer cardsGiuliano Pochini
There is a long standing bug in the drivers for cards with a vmixer because I overlooked a detail in the c++ generic driver by echoaudio. Those cards do not have a line-out volume control. It is a virtual control provided by the generic driver. The bug is harmless because the DSP just ignores the command to change the volume. *NB:* It breaks alsa-tools/echomixer. A patch for it will follow. This patch removes the line-out volume control from vmixer-equipped cards. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-15ASoC: Allow choice of ac97 gpio reset lineRobert Jarzmik
As the PXA27x series allow 2 gpios to reset the ac97 bus, allow through platform data configuration the definition of the correct gpio which will reset the AC97 bus. This comes from a silicon defect on the PXA27x series, where the gpio must be manually controlled in warm reset cases. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-14ASoC: Fix Zylonite for non-networked SSP modeMark Brown
This also simplifies the code a bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-14ASoC: Fix non-networked I2S mode for PXA SSPMark Brown
Two issues are fixed here: - I2S transmits the left frame with the clock low but I don't seem to get LRCLK out without SFRMDLY being set so invert SFRMP and set a delay. - I2S has a clock cycle prior to the first data byte in each channel so we need to delay the data by one cycle. Tested-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-13ALSA: hda - Add another HP model with IDT92HD71bx codecTakashi Iwai
HP laptops require GPIO0 on as EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-13ASoC: switch PXA SSP driver from network mode to PSPDaniel Mack
This switches the pxa ssp port usage from network mode to PSP mode. Removed some comments and checks for configured TDM channels. A special case is added to support configuration where BCLK = 64fs. We need to do some black magic in this case which doesn't look nice but there is unfortunately no other option than that. Diagnosed-by: Tim Ruetz <tim@caiaq.de> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-13ASoC: Move headset jack registration to device initialization for SDP3430Lopez Cruz, Misael
Move headset jack registration to the codec/machine specific initialization. Having the jack registration in machine init causes that the jack device gets initialized but not registered since the sound card is registered before the jack. Moving jack registration to device initialization will register the jack device along with all other devices associated to the card when the card is registed. As a consequence of jack device registered properly, the jack is detected as an input device. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-13ALSA: hda - power up before codec initializationTakashi Iwai
Change the power state of each widget before starting the initialization work so that all verbs are executed properly. Also, keep power-up during hwdep reconfiguration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ALSA: hda - Add model=vaio for STAC9872Takashi Iwai
Add the default pin config for model=vaio (in case of broken BIOS). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ALSA: hda - Print multiple out-amp values of pin widgets on Conext codecsTakashi Iwai
Add a flag to work around the non-standard amp-value handling on Conexant codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ALSA: hda - Add comments for the previous fix for conexant codecsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ASoC: Replace remaining uses of snd_soc_cnew with snd_soc_add_controls.Philipp Zabel
The drivers are basically duplicating the same code over and over. As snd_soc_cnew is going to be made static some time after the next merge window, we might as well convert them now. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>