aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2008-08-15ALSA: hda: 92HD75xx fixesMatthew Ranostay
Fixed several noise issues with DACs and ADCs on some 92HD75xxx based codecs with certain revision id's. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15ALSA: hda: dynamically create capture mux controlsMatthew Ranostay
Dynamically create capture mux volume controls when a output amp is detected. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15ALSA: fix a typo during snd_assert() removalTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15ALSA: usb-audio - Add ignore_ctl_error parameterTakashi Iwai
Added the ignore_ctl_error parameter to enable/disable the control-error handling for mixer interfaces. It was a hard-coded ifdef, and now you can change it more easily. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: hda - put all HDA codec IDs to components for precise hw detectionJaroslav Kysela
Export HDA codec subvendor ID and revision ID to user space via the components variable. Our alsactl utility requires these values for the perfect hardware identification. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: sound/pci: supported cards updateAlexander Beregalov
sound/pci: supported cards update Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: hda - initialize node 0x21 properly on AD1988 codecsTakashi Iwai
The widget node 0x21 should be initialized as unmuted/full (0dB) as default. This will reduce additional manual work by user at the first time use. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: hda - Don't reset SPDIF in each status changeTakashi Iwai
The SPDIF output is toggled at each time any SPDIF status bits are changed because of the known problems on some codecs. But, this also results in loosing the sync, and the problem is more obvious on HDMI output over SPDIF. Since the toggle is necessary only for some codecs, we should check whether this workaround is needed and skip if unnecessary. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: sound/pci/Kconfig: update for ice1712/24Alexander Beregalov
sound/pci/Kconfig: update for ice1712/24 Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: ice1724/revo: simple clean upAlexander Beregalov
ice1724/revo: simple clean up Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in other placesTakashi Iwai
Kill snd_assert() in other places, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in sound/pci/*Takashi Iwai
Kill snd_assert() in sound/pci/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in sound/isa/*Takashi Iwai
Kill snd_assert() in sound/isa/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in sound/core/*Takashi Iwai
Kill snd_assert() in sound/core/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: wss_lib: missing closing brace in (ifdeffed out) debug function.Rene Herman
Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: au88x0: clipping ceiling loop wrong in commentroel kluin
As is the clipping ceiling loop appears wrong anyways Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: ASoC - fix DMA channel selection in Freescale MPC8610 sound driversTimur Tabi
On the Freescale MPC8610, SSI1 is hard-coded to use DMA channels 0 and 1 for playback and capture, and SSI2 is hard-coded to use DMA channels 2 and 3. This patch fixes the fabric driver so that it uses the right channels. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: ASoC: Add WM8580 CODEC driverMark Brown
The WM8580 is an audio CODEC designed for DVD and surround sound applications, offering three stereo DACs and a stereo ADC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: rework snd_ad1848_probe()Rene Herman
Make snd_ad1848_probe() easier to follow. With an exception for only trying once as soon as the codec is out of init (which should be all that's needed) the detection logic should be unchanged. Signed-off-by: Rene Herman <rene.herman@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: ac97 - Enable mono-out on ALC203 codec as defaultTakashi Iwai
Use pin 37 for mono-out as default on ALC203. Reported-by: george pee <georgepee@gmail.com> Tested-by: george pee <georgepee@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: snd_usb_audio: fix SB Extigy IR Remote regressionPhillip Michael Jordan
The support for the SB Extigy's remote seems to be broken in all recent ALSA versions, including 1.0.17. The driver detects the event correctly, then submits a URB to query the RC code. On the Extigy, the URB is submitted with a length of 2 bytes. My hardware, however, only replies with 1 byte, containing the correct RC button code. The current implementation discards this as being too short. (line 1784 of usbmixer.c) This patch specifies a "minimum packet length" in the remote control configuration. I've left the values for the Audigy 2/Live! the same as the packet length, as I'm assuming the existing code works with them. (I don't have the hardware to confirm) This fixes the Extigy RC support, e.g. for use with Lirc. Signed-off-by: Phillip Michael Jordan <phil@philjordan.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: ASoC: Add WM8900 CODEC driverMark Brown
The WM8900 is designed for portable multimedia applications requiring low power consumption, high performance audio and a compact form factor providing: - 24 bit stereo ADC and DAC - Microphone and line inputs - Line outputs - Class G headphone amplifier Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: hda: Add support for ECS/PC Chips boards with Sigmatel codecsMauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: hda - Fix sound on NEC Versa S9100Pascal Terjan
This patch adds sound support for NEC Versa S9100 With it, we get sound on the internal speaker and headphone (with automute working) while there is no sound by default. External mic also works fine but I don't know if there is an internal one (if there is an internal mic it does not work currently), and I had to send back the hardware. Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: fix AZT2320 probe.Rene Herman
After the transition from cs4321_lib to wss_lib, azt2320 probe visits snd_ad1848_probe during detection. It expects register 0 (LEFT_INPUT) to be able to retain the value 0xaa during detection but AZT2320 does not support MIC gain meaning it reads back as 0x8a instead. Signed-off-by: Rene Herman <rene.herman@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: snd-cs4236: add Techmakers MF-4236PW PnP card IDRene Herman
Add the Techmakers MF-4236PW (Crystal CX4236B-XQ3) PnP card ID. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: remove second mutexes initializationKrzysztof Helt
Remove initializations of spinlock and mutexes which are done earlier in snd_wss_new(). The snd_wss_new() is called from snd_wss_create(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: opti92x-ad1848 WSS_HW_DETECT fixRene Herman
snd-opti92x-ad1848 mistakingly passes WSS_HW_OPTI93X currently. This fixes it as tested with a OPTi 82C929A/AD1848 card. Signed-off-by: Rene Herman <rene.herman@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: fix opti93x capture formats limitationsKrzysztof Helt
Limit opti93x cards capture formats to only linear ones. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss detection code instead of ad1848 oneKrzysztof Helt
Use the wss detection code and kill the ad1848 library. The library is fully assimilated into the new wss library. This required reworking of the AD1848 family code so the code is changed to correctly detect chips from the AD1848 and CS4231 families. I have tested it on following cards: Gallant SC-6600 (codec: AD1848, driver: snd-sc6600) SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape) SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy) Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236) Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330) Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232) Sound playback and recording works on all these cards. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss pcm code instead of ad1848 oneKrzysztof Helt
Use the wss pcm code and kill the ad1848 pcm code. The AD1848 chip is much slower than CS4231 chips so the waiting loop was increased 100x (10x is not enough). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss mixer code instead of ad1848 oneKrzysztof Helt
Use the wss mixer code and kill the ad1848 mixer code. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)Krzysztof Helt
Use CS4231P instead of AD1848P (kill the AD1848P). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: replace ad1848 mixer element macros with wss onesKrzysztof Helt
Use the wss macros instead of ad1848 ones. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss constants instead of ad1848 onesKrzysztof Helt
Use wss constants for mode. Move ad1848 hardware constants to the wss.h. Move mixer tlv macros into the ad1848_lib.c from the ad1848.h. Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem to be needed. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use struct snd_wss instead of snd_ad1848Krzysztof Helt
The snd_wss is superset of the snd_ad1848 so kill the latter and replace it with the snd_wss. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: rename cs4321_foo to wss_fooKrzysztof Helt
Rename functions and structures from the former cs4321_lib to names more corresponding with the new name: wss_lib. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: rename cs4231.h into wss.hKrzysztof Helt
Rename file include/sound/cs4231.h into include/sound/wss.h Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: move cs4231_lib into wss_libKrzysztof Helt
Move the file sound/isa/cs423x/cs4231_lib.c into sound/isa/cs423x/wss_lib.c This is the first step toward merging all libraries for Windows Sound System compatible chips into a single library. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01ALSA: ice1724 - Support for Terrasoniq/MUSONIK TS22 PCI cardMisha Zhilin
Added support for Terrasoniq/MUSONIK TS22 PCI card. Signed-off-by: Misha Zhilin <misha@epiphan.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICEPawel MOLL
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine to have more than 8 PCM devices per card, except one place - the SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate devices > 7. This patch fixes the issue, changing the devices list organisation. Instead of adding new device to the tail, the list is now kept always ordered (by card number, then device number). Thus, during enumeration, it is easy to discover the fact that there is no more given card's devices. Additionally the device field of struct snd_pcm had to be changed to int, as its "unsignednity" caused a lot of problems when comparing it to potentially negative signed values. (-1 is 0xffffffff or even more then ;-) Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01ALSA: Add USB US122L driverKarsten Wiese
Added a new US122L usb-audio driver. This driver works together with a dedicated alsa-lib plugin. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01sound: Revert "ALSA: Fix limit of 8 PCM devices in ↵Jaroslav Kysela
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE" This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866. New, updated patch with same subject replaces this commit. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICEPawel MOLL
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine to have more than 8 PCM devices per card, except one place - the SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate devices > 7. This patch fixes the issue, changing the devices list organisation. Instead of adding new device to the tail, the list is now kept always ordered (by card number, then device number). Thus, during enumeration, it is easy to discover the fact that there is no more given card's devices. The same limit was present in OSS emulation code. It has been fixed as well. Additionally the device field of struct snd_pcm is now int, instead of unsigned int, as there is no obvious reason for keeping it unsigned. This caused a lot of problems with comparing this value with other (almost always signed) variables. There is just one more place where device number is unsigned - in struct snd_pcm_info, which should be also sorted out in future. Signed-off-by: Pawel MOLL <pawel.moll@st.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: convert use of uint to unsigned intJon Smirl
ASOC: convert use of uint to unsigned int Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Add all CODECs Kconfig optionMark Brown
Allow all the CODEC drivers to be built without a machine driver in order to facilitate testing of subsystem-wide changes and gain better coverage from automated testing efforts. This also helps things like the generic OpenFirmware machine driver for PowerPC. Currently AC97 CODECs are not included since the current setup relies on having a controller driver available. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: AD1980 audio codec driverCliff Cai
[Mechanical updates from code review applied -- broonie] Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Staticise keyclick dev_attr in tlv320aic26Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Export DAI and codec for TLV320AIC26Mark Brown
This fixes sparse warnings and allows non-OpenFirmware systems to attempt to bind to the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driverGrant Likely
ASoC Codec driver for the TLV320AIC26 device. As it stands, this driver doesn't support all the modes and clocking options of the AIC16, but it is a start. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 10:07:10 +0000