aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2008-12-10ALSA: cs5535audio: suspend/resume callbacks are only defined with CONFIG_PMAndres Salomon
snd_cs5535audio_suspend and snd_cs5535audio_resume are only defined when CONFIG_PM is set; make that clear in the header file. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: turn off PCM properly if closing the audio deviceJaya Kumar
As per <http://dev.laptop.org/ticket/1420>, we need to properly turn off the PCM if we're closing the device in order to save power. This also causes the MIC led to turn off properly. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: cs5535audio: stick AD1888 bitshift values into a header fileAndres Salomon
We'd like to use the High Pass Filter and V_REFOUT bitshift values elsewhere, so stick them into a ac97_codec.h. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ASoC: Add codec registration APIMark Brown
Another part of the backporting of Liam's ASoC v2 work. Using this is more complicated than the other registration types since currently the codec is instantiated during the probe of the ASoC device so we can't currently readily wait for the codec to register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-10ALSA: Add support for mechanical jack insertionMark Brown
Some systems support both mechanical and electrical jack detection, allowing them to report that a jack is physically present but does not have any functioning connections. Add a new jack type for these, allowing user space to report faulty connections. Thanks to Guillem Jover for the suggestion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ASoC: TWL4030: Change the name for the DACsPeter Ujfalusi
To avoid confusion the names for the DACs changed: DACL1 -> DAC Left1 ... Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-10ASoC: TWL4030: Small cleanupPeter Ujfalusi
The mux switch related texts fits to on line, no need to wrap them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-10ASoC: TWL4030: Add missing Carkit outputPeter Ujfalusi
SND_SOC_DAPM_OUTPUT definition for carkitL/R was missing. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-10ASoC: Work around warnings from some build environmentsMark Brown
BUG() should be marked as not returning but for at least some configurations (including some widely deployed compilers) that's either not happening or being forgotten by the compiler. Add some extra return statements to the affected paths. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-10ALSA: hda - Add quirk for HP6730B laptopTakashi Iwai
Added model=laptop for HP 6730B laptop with AD1984A codec. Reference: Novell bnc#457909 https://bugzilla.novell.com/show_bug.cgi?id=457909 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: stable@kernel.org
2008-12-10ALSA: ca0106 - Check return value of pci_enable_device() in resumeTakashi Iwai
The return value of pci_enable_device() must be checked even in resume callback: sound/pci/ca0106/ca0106_main.c:1779: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: ASoC - Fix symbol conflicts in omac-mcbsp.cTakashi Iwai
Add snd_ prefix to avoid the conflict of symbols in omac-mcbsp.c: sound/soc/omap/omap-mcbsp.c:503: error: static declaration of 'omap_mcbsp_init' follows non-static declaration arch/arm/plat-omap/include/mach/mcbsp.h:373: error: previous declaration of 'omap_mcbsp_init' was here Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: sound: Make staticRoel Kluin
Sparse asked whether these could be static. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: ASoC - Fix wrong section typesTakashi Iwai
The module init entries should be __init instead of __devinit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: ASoC - Fix module init entry for twl4030.cTakashi Iwai
Fixed the function name of module init entry for twl4030.c, which conflicted with the existing hardware init function: sound/soc/codecs/twl4030.c:1278: error: conflicting types for 'twl4030_init' sound/soc/codecs/twl4030.c:1187: error: previous definition of 'twl4030_init' was here Also fixed the section type of init function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-09ASoC: Fix typos in Atmel module registrationMark Brown
I wish I had boards which work with unmodified kernels :/ Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Convert WM8900 to allow registration by machine codeMark Brown
This makes use of the support for delayed DAI registration to allow the WM8900 I2C device to be registered by general platform/architecture code rather than as part of the ASoC device probe. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Wait for non-AC97 codec DAIs before instantiatingMark Brown
This will allow codec drivers to be refactored to allow them to be registered out of line with the ASoC device registration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Initial framework for dynamic card instantiationMark Brown
Use the lists of platforms, platform DAIs and cards to check to see that everything has registered. Since relationships are still specified by direct references to the structures in the drivers and the drivers all register everything at modprobe there should be no practical effect yet. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Register non-AC97 codec DAIsMark Brown
Currently this is done at module probe time since ASoC ties in codec device probe to the instantiation of the entire ASoC device. Subsequent patches will refactor the codec drivers to handle probing separately. Note that the core does not yet use this information. AC97 is special since the codec is controlled over the AC97 link but we want to give the machine driver a chance to set up the system before trying to instantiate since it may need to do configuration before the AC97 link will operate Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Register platform driversMark Brown
This is done at modprobe time, mirroring current behaviour, except for mpc5200_psc_i2s where we do registration at the same time as we register with soc-of-simple. Since the core currently ignores registration this has no practical impact. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Add platform registration APIMark Brown
ASoC v2 allows platform drivers to instantiate independantly of the overall ASoC card. This API allows drivers to notify the core when they are registered. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Register platform DAIsMark Brown
Register all platform DAIs with the core. In line with current behaviour this is done at module probe time rather than when the devices are probed (since currently that only happens as the entire ASoC card is registered except for those drivers that currently implement some kind of hotplug). Since the core currently ignores DAI registration this has no practical effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Add DAI registration APIMark Brown
Add API calls to register and unregister DAIs with the core. Currently these APIs are ineffective. Since multiple DAIs for a given device are a common case bulk variants are provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Add card registration APIMark Brown
ASoC v2 allows cards, codecs and platforms to instantiate separately, with the overall ASoC device only being instantiated once all the required components have registered. As part of backporting Liam's work introduce an initial version of the card registration functions. At present these do nothing active and are internal only, they will be exposed to machine drivers after further backporting. Adding this now allows the datastructures used for dynamic card instantiation to be built up gradually. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: TWL4030: Do not alter the Headset output volume on power-up/downPeter Ujfalusi
There is a separate gain control for the Headset output already. Do not reset the gain to 0 dB at power up. In power-down, there is no need to set the Headset output gain to power-down mode, since if the CODECPDZ is in powered off this setting has no effect. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: TWL4030: DAPM mapping of the Handsfree outputsPeter Ujfalusi
Adds DAPM muxing, routing for the Handsfree outputs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: TWL4030: DAPM mapping of the Carkit outputsPeter Ujfalusi
Adds DAPM muxing, routing for the Carkit outputs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: TWL4030: DAPM mapping of the Headset outputsPeter Ujfalusi
Adds DAPM muxing, routing for the Headset outputs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: TWL4030: DAPM mapping of the PreDriv outputsPeter Ujfalusi
Adds DAPM muxing, routing for the PreDrive outputs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: TWL4030: DAPM mapping of the Earpiece outputPeter Ujfalusi
Adds DAPM muxing, routing for the Earpiece output. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: TWL4030: Add DAPM event handler for output MUX selectionPeter Ujfalusi
DAPM event handler is set to filter out invalid MUX settings for certain outputs. Earpiece: - 0 = Off - 1 = DACL1 - 2 = DACL2 - 3 = *** Invalid *** - 4 = DACR1 PreDriveL/R: - 0 = Off/Off - 1 = DACL1/DACR1 - 2 = DACL2/DACR2 - 3 = *** Invalid/Invalid *** - 4 = DACR2/DACL2 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: TWL4030: Add Analog PGA control switch to DAPMPeter Ujfalusi
Add all four APGA switch to DAPM routing and widgets. Add user control for DA enable for all APGA as normal control. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: TWL4030: Correct DAPM_DAC with power controlPeter Ujfalusi
Add all four DACs to dapm_widgets with power switch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-08ALSA: hrtimer - Use hard-irq callbackTakashi Iwai
Use the hard-irq mode for the callback (for possible removal of soft-irq mode in future). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-08ALSA: timer - Add comments and use ns_to_ktime()Takashi Iwai
Add the license and misc comments at the beginning of the code. Also, use ns_to_ktime() for simplification. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-07Sound: hda - Restore PCI configuration space with interrupts offRafael J. Wysocki
Move the restoration of the standard PCI configuration registers in the snd_hda_intel driver to a ->resume_early() callback executed with interrupts disabled, since doing that with interrupts enabled may lead to problems in some cases. This patch addresses the regression from 2.6.26 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12121 . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-05ASoC: tlv320aic3x: control additions and cleanupsDaniel Mack
- split "Line Playback Switch" into "LineL Playback Switch" and "LineR Playback Switch" - split "Line PGA Bypass Playback Volume" into "LineL Left PGA Bypass Playback Volume" and "LineR Right PGA Bypass Playback Volume" - split "Line Line2 Bypass Playback Volume" into "LineL Line2 Bypass Playback Volume" and "LineR Line2 Bypass Playback Volume" - Added "HP Right PGA Bypass Playback Volume" Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-05ASoC: Add support for OMAP3 PandoraGrazvydas Ignotas
This patch adds basic support for OMAP3 Pandora. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-05ALSA: hda - Proper power-map toggling for input pinsTakashi Iwai
The current code overrides the event type on input pins always to PWR_EVENT. Although this still works (PWR_EVENT and INSERT_EVENT are handled samely), it'd be better to avoid such overrides. Also, currently the unsol events are registered even for fixed pins which will never raise the pin-detection event. This patch fixes both issues. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-05ALSA: hda - Fix pin-detection in patch_sigmatel.cTakashi Iwai
The pin-detection function used in patch_sigmatel.c shouldn't be specific to HP pin because it's used for input pins in general, too. This patch fixes the detection function, removes the HP check from it and moves to stac92xx_hp_detect(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-04ALSA: ca0106 - Add power-management supportTakashi Iwai
Added the missing PM support for snd-ca0106 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-04ALSA: hda - Add forgotten module alias for Nvidia MCP67 HDMITakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-04ALSA: hda - Add MCP67 HDMI supportScott Waye
Added id for MCP67 HDMI codec. Signed-off-by: Scott Waye <scott@waye.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-03ASoC: Remove platform device from DAI suspend and resume operationsMark Brown
None of the DAIs use it except s3c2412-i2s which only uses it for dev_() printouts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-03ASoC: Remove device from platform suspend and resume operationsMark Brown
None of the platforms are actually using the SoC device so remove it (only atmel actually has a suspend method). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-03ASoC: Push debugfs files out of the snd_soc_device structureMark Brown
This is in preparation for the removal of struct snd_soc_device. The pop time configuration should really be a property of the card not the codec but since DAPM currently uses the codec rather than the card using the codec is fine for now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-03ALSA: Reduce stall detection timeout in riptide.cPeter Gruber
Reduce the command timeout to 0.5sec. Should be enough to allow a working command interface but removes a RCU stall and slow resume on some revisions where the AC97 revision detection stalls in resume. Signed-off-by: Peter Gruber <nokos@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-03Merge branch 'topic/hda-modularize' into topic/hdaTakashi Iwai
2008-12-03ASoC: tlv320aic3x: headset/button press supportDaniel Mack
- Add aic3x_set_headset_detection() function to define the headset detection mode for tlv32aic3x chips - added aic3x_button_pressed() - Read from the real-time registers in aic3x_headset_detected() to query headset presence without an occured interrupt Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 20:33:03 +0000