From a88a477f1df703f0e2a7592e19618799cb598623 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Breno=20Leit=C3=A3o?= Date: Thu, 24 Sep 2009 16:58:22 -0300 Subject: jsm: IRQ handlers doesn't need to have IRQ_DISABLED enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently jsm is showing the following message when loaded: IRQ 432/JSM: IRQF_DISABLED is not guaranteed on shared IRQs It's because the request_irq() is called using IRQF_DISABLED and IRQF_SHARED. Actually there is no need to use IRQF_DISABLED in this driver. Signed-off-by: Breno Leitão Cc: Scott Kilau Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index b3604aa322a..48326f75a81 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -123,7 +123,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device } rc = request_irq(brd->irq, brd->bd_ops->intr, - IRQF_DISABLED|IRQF_SHARED, "JSM", brd); + IRQF_SHARED, "JSM", brd); if (rc) { printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq); goto out_iounmap; -- cgit v1.2.3 From 354aaf964ed1ae45c175aa496526bae4662c4452 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Breno=20Leit=C3=A3o?= Date: Thu, 24 Sep 2009 16:58:23 -0300 Subject: jsm: Rewriting a bad log message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Actually jsm displays "Device Added" 8 times (for a 8 port device). This silly patch just makes things more informative, showing the port (instead of the device) that was added. Signed-off-by: Breno Leitão Cc: Scott Kilau Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm_tty.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 7439c037362..6423dfb825f 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -472,7 +472,7 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd) if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port)) printk(KERN_INFO "jsm: add device failed\n"); else - printk(KERN_INFO "Added device \n"); + printk(KERN_INFO "jsm: Port %d added\n", i); } jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); -- cgit v1.2.3 From a53568a22adf6881183096d0863b0ff301173cbd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Breno=20Leit=C3=A3o?= Date: Tue, 29 Sep 2009 15:16:55 -0300 Subject: jsm: remove the ch_custom_speed field MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the ch_custom_speed field exists but is never used, so, this patch removes it. Signed-off-by: Breno Leitão Cc: Scott Kilau Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm.h | 1 - drivers/serial/jsm/jsm_neo.c | 4 ---- 2 files changed, 5 deletions(-) diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index 4e5f3bde046..afcbee24a6b 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -216,7 +216,6 @@ struct jsm_channel { u8 ch_startc; /* Start character */ u32 ch_old_baud; /* Cache of the current baud */ - u32 ch_custom_speed;/* Custom baud, if set */ u32 ch_wopen; /* Waiting for open process cnt */ diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c index b4b124e4828..088e702ef5f 100644 --- a/drivers/serial/jsm/jsm_neo.c +++ b/drivers/serial/jsm/jsm_neo.c @@ -957,10 +957,6 @@ static void neo_param(struct jsm_channel *ch) ch->ch_old_baud = 0; return; - } else if (ch->ch_custom_speed) { - baud = ch->ch_custom_speed; - if (ch->ch_flags & CH_BAUD0) - ch->ch_flags &= ~(CH_BAUD0); } else { int i; unsigned int cflag; -- cgit v1.2.3 From cead486f407bbf152feccfe3734dd3966f9ff166 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Breno=20Leit=C3=A3o?= Date: Tue, 29 Sep 2009 15:16:56 -0300 Subject: jsm: removing ch_old_baud field MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the field jsm_channel->ch_old_baud is not used, just assigned in a lot of places but never used. This patches removes this field. Signed-off-by: Breno Leitão Cc: Scott Kilau Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm.h | 2 -- drivers/serial/jsm/jsm_neo.c | 2 -- drivers/serial/jsm/jsm_tty.c | 2 -- 3 files changed, 6 deletions(-) diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index afcbee24a6b..d413e4a6aa9 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -215,8 +215,6 @@ struct jsm_channel { u8 ch_stopc; /* Stop character */ u8 ch_startc; /* Start character */ - u32 ch_old_baud; /* Cache of the current baud */ - u32 ch_wopen; /* Waiting for open process cnt */ u8 ch_mostat; /* FEP output modem status */ diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c index 088e702ef5f..bee37274cc9 100644 --- a/drivers/serial/jsm/jsm_neo.c +++ b/drivers/serial/jsm/jsm_neo.c @@ -954,7 +954,6 @@ static void neo_param(struct jsm_channel *ch) ch->ch_flags |= (CH_BAUD0); ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); neo_assert_modem_signals(ch); - ch->ch_old_baud = 0; return; } else { @@ -1041,7 +1040,6 @@ static void neo_param(struct jsm_channel *ch) quot = ch->ch_bd->bd_dividend / baud; if (quot != 0) { - ch->ch_old_baud = baud; writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr); writeb((quot & 0xff), &ch->ch_neo_uart->txrx); writeb((quot >> 8), &ch->ch_neo_uart->ier); diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 6423dfb825f..1bcad596f3d 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -296,8 +296,6 @@ static void jsm_tty_close(struct uart_port *port) bd->bd_ops->assert_modem_signals(channel); } - channel->ch_old_baud = 0; - /* Turn off UART interrupts for this port */ channel->ch_bd->bd_ops->uart_off(channel); -- cgit v1.2.3 From 2fd107c01567673c85f724a24d56614478d40f89 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Breno=20Leit=C3=A3o?= Date: Tue, 29 Sep 2009 15:16:57 -0300 Subject: jsm: Remove ch_cpstime field MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the field jsm_channel->ch_cpstime is defined but never used, so this patch removes it. Signed-off-by: Breno Leitão Cc: Scott Kilau Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index d413e4a6aa9..8c143517907 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -206,8 +206,6 @@ struct jsm_channel { u64 ch_close_delay; /* How long we should drop RTS/DTR for */ - u64 ch_cpstime; /* Time for CPS calculations */ - tcflag_t ch_c_iflag; /* channel iflags */ tcflag_t ch_c_cflag; /* channel cflags */ tcflag_t ch_c_oflag; /* channel oflags */ -- cgit v1.2.3 From a44829dd8bcd5335f0498275bb63f1028b32f141 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Breno=20Leit=C3=A3o?= Date: Tue, 29 Sep 2009 15:16:58 -0300 Subject: jsm: Removing unused jsm_channel->ch_wopen field MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the jsm_channel->ch_wopen field is defined and never used. So, this patch removes it. Signed-off-by: Breno Leitão Cc: Scott Kilau Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index 8c143517907..484c9275718 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -213,8 +213,6 @@ struct jsm_channel { u8 ch_stopc; /* Stop character */ u8 ch_startc; /* Start character */ - u32 ch_wopen; /* Waiting for open process cnt */ - u8 ch_mostat; /* FEP output modem status */ u8 ch_mistat; /* FEP input modem status */ -- cgit v1.2.3 From f9d1dff276c40157638415cdddf6a051869e8d92 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Breno=20Leit=C3=A3o?= Date: Tue, 29 Sep 2009 15:16:59 -0300 Subject: jsm: removing the field jsm_board->intr_count MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently there is a field in the jsm_board structure to cont the number of interrupt that the card recevived, but it's not working properly when the IRQ line is shared, and also nowhere else this field is used. So, This patch is removing it. Signed-off-by: Breno Leitão Cc: Scott Kilau Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm.h | 1 - drivers/serial/jsm/jsm_neo.c | 2 -- 2 files changed, 3 deletions(-) diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index 484c9275718..38a509c684c 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -138,7 +138,6 @@ struct jsm_board u32 nasync; /* Number of ports on card */ u32 irq; /* Interrupt request number */ - u64 intr_count; /* Count of interrupts */ u64 membase; /* Start of base memory of the card */ u64 membase_end; /* End of base memory of the card */ diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c index bee37274cc9..7960d9633c1 100644 --- a/drivers/serial/jsm/jsm_neo.c +++ b/drivers/serial/jsm/jsm_neo.c @@ -1117,8 +1117,6 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) unsigned long lock_flags2; int outofloop_count = 0; - brd->intr_count++; - /* Lock out the slow poller from running on this board. */ spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); -- cgit v1.2.3 From e6bdf24cf2992e1775fc095ed021f6b886707c41 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Wed, 14 Oct 2009 14:57:51 -0300 Subject: jsm: adding EEH handlers Adding EEH handlers for the serial jsm driver. This patch adds the PCI error handlers and also register them to be called when a error is detected. Signed-off-by: Breno Leitao Acked-by: Scott Kilau Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm_driver.c | 46 +++++++++++++++++++++++++++++++++++++++++ drivers/serial/jsm/jsm_tty.c | 2 +- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 48326f75a81..108c3e0471f 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -48,6 +48,17 @@ struct uart_driver jsm_uart_driver = { .nr = NR_PORTS, }; +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state); +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev); +static void jsm_io_resume(struct pci_dev *pdev); + +static struct pci_error_handlers jsm_err_handler = { + .error_detected = jsm_io_error_detected, + .slot_reset = jsm_io_slot_reset, + .resume = jsm_io_resume, +}; + int jsm_debug; module_param(jsm_debug, int, 0); MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); @@ -164,6 +175,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device } pci_set_drvdata(pdev, brd); + pci_save_state(pdev); return 0; out_free_irq: @@ -222,8 +234,42 @@ static struct pci_driver jsm_driver = { .id_table = jsm_pci_tbl, .probe = jsm_probe_one, .remove = __devexit_p(jsm_remove_one), + .err_handler = &jsm_err_handler, }; +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + jsm_remove_uart_port(brd); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev) +{ + int rc; + + rc = pci_enable_device(pdev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_set_master(pdev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void jsm_io_resume(struct pci_dev *pdev) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + pci_restore_state(pdev); + + jsm_uart_port_init(brd); +} + static int __init jsm_init_module(void) { int rc; diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 1bcad596f3d..cd95e215550 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -430,7 +430,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd) return 0; } -int __devinit jsm_uart_port_init(struct jsm_board *brd) +int jsm_uart_port_init(struct jsm_board *brd) { int i; unsigned int line; -- cgit v1.2.3 From 1cceefd3a28e54c0777fe544e1fd32253b2a1de5 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 3 Oct 2009 00:12:06 +0400 Subject: tty: const: constify remaining tty_operations Signed-off-by: Alexey Dobriyan Signed-off-by: Greg Kroah-Hartman --- arch/xtensa/platforms/iss/console.c | 2 +- drivers/char/bfin_jtag_comm.c | 2 +- drivers/char/epca.c | 2 +- drivers/char/pcmcia/ipwireless/tty.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 4c559cf7da2..e60a1f57022 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -196,7 +196,7 @@ static const struct file_operations rs_proc_fops = { .release = single_release, }; -static struct tty_operations serial_ops = { +static const struct tty_operations serial_ops = { .open = rs_open, .close = rs_close, .write = rs_write, diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c index 1d7c34c73b2..2628c7415ea 100644 --- a/drivers/char/bfin_jtag_comm.c +++ b/drivers/char/bfin_jtag_comm.c @@ -226,7 +226,7 @@ bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout) } } -static struct tty_operations bfin_jc_ops = { +static const struct tty_operations bfin_jc_ops = { .open = bfin_jc_open, .close = bfin_jc_close, .write = bfin_jc_write, diff --git a/drivers/char/epca.c b/drivers/char/epca.c index dde5134713e..17b044a71e0 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -935,7 +935,7 @@ static int info_open(struct tty_struct *tty, struct file *filp) return 0; } -static struct tty_operations info_ops = { +static const struct tty_operations info_ops = { .open = info_open, .ioctl = info_ioctl, }; diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c index 674b3ab3587..2bb7874a689 100644 --- a/drivers/char/pcmcia/ipwireless/tty.c +++ b/drivers/char/pcmcia/ipwireless/tty.c @@ -603,7 +603,7 @@ void ipwireless_tty_free(struct ipw_tty *tty) } } -static struct tty_operations tty_ops = { +static const struct tty_operations tty_ops = { .open = ipw_open, .close = ipw_close, .hangup = ipw_hangup, -- cgit v1.2.3 From f53a2ade0bb9f2a81f473e6469155172a96b7c38 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 9 Oct 2009 12:56:41 +0100 Subject: tty: esp: remove broken driver The ESP driver has been marked broken for years. It's an old ISA device that clearly nobody cares about any more. Remove it Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- Documentation/serial/hayes-esp.txt | 154 --- drivers/char/Kconfig | 13 - drivers/char/Makefile | 1 - drivers/char/esp.c | 2533 ------------------------------------ include/linux/Kbuild | 1 - include/linux/hayesesp.h | 114 -- 6 files changed, 2816 deletions(-) delete mode 100644 Documentation/serial/hayes-esp.txt delete mode 100644 drivers/char/esp.c delete mode 100644 include/linux/hayesesp.h diff --git a/Documentation/serial/hayes-esp.txt b/Documentation/serial/hayes-esp.txt deleted file mode 100644 index 09b5d585675..00000000000 --- a/Documentation/serial/hayes-esp.txt +++ /dev/null @@ -1,154 +0,0 @@ -HAYES ESP DRIVER VERSION 2.1 - -A big thanks to the people at Hayes, especially Alan Adamson. Their support -has enabled me to provide enhancements to the driver. - -Please report your experiences with this driver to me (arobinso@nyx.net). I -am looking for both positive and negative feedback. - -*** IMPORTANT CHANGES FOR 2.1 *** -Support for PIO mode. Five situations will cause PIO mode to be used: -1) A multiport card is detected. PIO mode will always be used. (8 port cards -do not support DMA). -2) The DMA channel is set to an invalid value (anything other than 1 or 3). -3) The DMA buffer/channel could not be allocated. The port will revert to PIO -mode until it is reopened. -4) Less than a specified number of bytes need to be transferred to/from the -FIFOs. PIO mode will be used for that transfer only. -5) A port needs to do a DMA transfer and another port is already using the -DMA channel. PIO mode will be used for that transfer only. - -Since the Hayes ESP seems to conflict with other cards (notably sound cards) -when using DMA, DMA is turned off by default. To use DMA, it must be turned -on explicitly, either with the "dma=" option described below or with -setserial. A multiport card can be forced into DMA mode by using setserial; -however, most multiport cards don't support DMA. - -The latest version of setserial allows the enhanced configuration of the ESP -card to be viewed and modified. -*** - -This package contains the files needed to compile a module to support the Hayes -ESP card. The drivers are basically a modified version of the serial drivers. - -Features: - -- Uses the enhanced mode of the ESP card, allowing a wider range of - interrupts and features than compatibility mode -- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs, - reducing CPU load -- Supports primary and secondary ports - - -If the driver is compiled as a module, the IRQs to use can be specified by -using the irq= option. The format is: - -irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380] - -The address in brackets is the base address of the card. The IRQ of -nonexistent cards can be set to 0. If an IRQ of a card that does exist is set -to 0, the driver will attempt to guess at the correct IRQ. For example, to set -the IRQ of the card at address 0x300 to 12, the insmod command would be: - -insmod esp irq=0,0,0,0,0,0,12,0 - -The custom divisor can be set by using the divisor= option. The format is the -same as for the irq= option. Each divisor value is a series of hex digits, -with each digit representing the divisor to use for a corresponding port. The -divisor value is constructed RIGHT TO LEFT. Specifying a nonzero divisor value -will automatically set the spd_cust flag. To calculate the divisor to use for -a certain baud rate, divide the port's base baud (generally 921600) by the -desired rate. For example, to set the divisor of the primary port at 0x300 to -4 and the divisor of the secondary port at 0x308 to 8, the insmod command would -be: - -insmod esp divisor=0,0,0,0,0,0,0x84,0 - -The dma= option can be used to set the DMA channel. The channel can be either -1 or 3. Specifying any other value will force the driver to use PIO mode. -For example, to set the DMA channel to 3, the insmod command would be: - -insmod esp dma=3 - -The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger -levels. They specify when the ESP card should send an interrupt. Larger -values will decrease the number of interrupts; however, a value too high may -result in data loss. Valid values are 1 through 1023, with 768 being the -default. For example, to set the receive trigger level to 512 bytes and the -transmit trigger level to 700 bytes, the insmod command would be: - -insmod esp rx_trigger=512 tx_trigger=700 - -The flow_off= and flow_on= options can be used to set the hardware flow off/ -flow on levels. The flow on level must be lower than the flow off level, and -the flow off level should be higher than rx_trigger. Valid values are 1 -through 1023, with 1016 being the default flow off level and 944 being the -default flow on level. For example, to set the flow off level to 1000 bytes -and the flow on level to 935 bytes, the insmod command would be: - -insmod esp flow_off=1000 flow_on=935 - -The rx_timeout= option can be used to set the receive timeout value. This -value indicates how long after receiving the last character that the ESP card -should wait before signalling an interrupt. Valid values are 0 though 255, -with 128 being the default. A value too high will increase latency, and a -value too low will cause unnecessary interrupts. For example, to set the -receive timeout to 255, the insmod command would be: - -insmod esp rx_timeout=255 - -The pio_threshold= option sets the threshold (in number of characters) for -using PIO mode instead of DMA mode. For example, if this value is 32, -transfers of 32 bytes or less will always use PIO mode. - -insmod esp pio_threshold=32 - -Multiple options can be listed on the insmod command line by separating each -option with a space. For example: - -insmod esp dma=3 trigger=512 - -The esp module can be automatically loaded when needed. To cause this to -happen, add the following lines to /etc/modprobe.conf (replacing the last line -with options for your configuration): - -alias char-major-57 esp -alias char-major-58 esp -options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0 - -You may also need to run 'depmod -a'. - -Devices must be created manually. To create the devices, note the output from -the module after it is inserted. The output will appear in the location where -kernel messages usually appear (usually /var/adm/messages). Create two devices -for each 'tty' mentioned, one with major of 57 and the other with major of 58. -The minor number should be the same as the tty number reported. The commands -would be (replace ? with the tty number): - -mknod /dev/ttyP? c 57 ? -mknod /dev/cup? c 58 ? - -For example, if the following line appears: - -Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port - -...two devices should be created: - -mknod /dev/ttyP8 c 57 8 -mknod /dev/cup8 c 58 8 - -You may need to set the permissions on the devices: - -chmod 666 /dev/ttyP* -chmod 666 /dev/cup* - -The ESP module and the serial module should not conflict (they can be used at -the same time). After the ESP module has been loaded the ports on the ESP card -will no longer be accessible by the serial driver. - -If I/O errors are experienced when accessing the port, check for IRQ and DMA -conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and -DMAs currently in use). - -Enjoy! -Andrew J. Robinson diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 6aad99ec4e0..6f31c947210 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -201,19 +201,6 @@ config DIGIEPCA To compile this driver as a module, choose M here: the module will be called epca. -config ESPSERIAL - tristate "Hayes ESP serial port support" - depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API && BROKEN - help - This is a driver which supports Hayes ESP serial ports. Both single - port cards and multiport cards are supported. Make sure to read - . - - To compile this driver as a module, choose M here: the - module will be called esp. - - If unsure, say N. - config MOXA_INTELLIO tristate "Moxa Intellio support" depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 19a79dd79ee..f957edf7e45 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o obj-$(CONFIG_AUDIT) += tty_audit.o obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o -obj-$(CONFIG_ESPSERIAL) += esp.o obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o diff --git a/drivers/char/esp.c b/drivers/char/esp.c deleted file mode 100644 index b19d43cd954..00000000000 --- a/drivers/char/esp.c +++ /dev/null @@ -1,2533 +0,0 @@ -/* - * esp.c - driver for Hayes ESP serial cards - * - * --- Notices from serial.c, upon which this driver is based --- - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now - * much more extensible to support other serial cards based on the - * 16450/16550A UART's. Added support for the AST FourPort and the - * Accent Async board. - * - * set_serial_info fixed to set the flags, custom divisor, and uart - * type fields. Fix suggested by Michael K. Johnson 12/12/92. - * - * 11/95: TIOCMIWAIT, TIOCGICOUNT by Angelo Haritsis - * - * 03/96: Modularised by Angelo Haritsis - * - * rs_set_termios fixed to look also for changes of the input - * flags INPCK, BRKINT, PARMRK, IGNPAR and IGNBRK. - * Bernd Anhäupl 05/17/96. - * - * --- End of notices from serial.c --- - * - * Support for the ESP serial card by Andrew J. Robinson - * (Card detection routine taken from a patch - * by Dennis J. Boylan). Patches to allow use with 2.1.x contributed - * by Chris Faylor. - * - * Most recent changes: (Andrew J. Robinson) - * Support for PIO mode. This allows the driver to work properly with - * multiport cards. - * - * Arnaldo Carvalho de Melo - - * several cleanups, use module_init/module_exit, etc - * - * This module exports the following rs232 io functions: - * - * int espserial_init(void); - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include - -#define NR_PORTS 64 /* maximum number of ports */ -#define NR_PRIMARY 8 /* maximum number of primary ports */ -#define REGION_SIZE 8 /* size of io region to request */ - -/* The following variables can be set by giving module options */ -static int irq[NR_PRIMARY]; /* IRQ for each base port */ -static unsigned int divisor[NR_PRIMARY]; /* custom divisor for each port */ -static unsigned int dma = ESP_DMA_CHANNEL; /* DMA channel */ -static unsigned int rx_trigger = ESP_RX_TRIGGER; -static unsigned int tx_trigger = ESP_TX_TRIGGER; -static unsigned int flow_off = ESP_FLOW_OFF; -static unsigned int flow_on = ESP_FLOW_ON; -static unsigned int rx_timeout = ESP_RX_TMOUT; -static unsigned int pio_threshold = ESP_PIO_THRESHOLD; - -MODULE_LICENSE("GPL"); - -module_param_array(irq, int, NULL, 0); -module_param_array(divisor, uint, NULL, 0); -module_param(dma, uint, 0); -module_param(rx_trigger, uint, 0); -module_param(tx_trigger, uint, 0); -module_param(flow_off, uint, 0); -module_param(flow_on, uint, 0); -module_param(rx_timeout, uint, 0); -module_param(pio_threshold, uint, 0); - -/* END */ - -static char *dma_buffer; -static int dma_bytes; -static struct esp_pio_buffer *free_pio_buf; - -#define DMA_BUFFER_SZ 1024 - -#define WAKEUP_CHARS 1024 - -static char serial_name[] __initdata = "ESP serial driver"; -static char serial_version[] __initdata = "2.2"; - -static struct tty_driver *esp_driver; - -/* - * Serial driver configuration section. Here are the various options: - * - * SERIAL_PARANOIA_CHECK - * Check the magic number for the esp_structure where - * ever possible. - */ - -#undef SERIAL_PARANOIA_CHECK -#define SERIAL_DO_RESTART - -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW - -#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) -#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ - tty->name, info->port.flags, \ - serial_driver.refcount, \ - info->port.count, tty->count, s) -#else -#define DBG_CNT(s) -#endif - -static struct esp_struct *ports; - -static void change_speed(struct esp_struct *info); -static void rs_wait_until_sent(struct tty_struct *, int); - -/* - * The ESP card has a clock rate of 14.7456 MHz (that is, 2**ESPC_SCALE - * times the normal 1.8432 Mhz clock of most serial boards). - */ -#define BASE_BAUD ((1843200 / 16) * (1 << ESPC_SCALE)) - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -static inline int serial_paranoia_check(struct esp_struct *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char badmagic[] = KERN_WARNING - "Warning: bad magic number for serial struct (%s) in %s\n"; - static const char badinfo[] = KERN_WARNING - "Warning: null esp_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != ESP_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -static inline unsigned int serial_in(struct esp_struct *info, int offset) -{ - return inb(info->io_port + offset); -} - -static inline void serial_out(struct esp_struct *info, int offset, - unsigned char value) -{ - outb(value, info->io_port+offset); -} - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rs_stop(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - spin_lock_irqsave(&info->lock, flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - spin_unlock_irqrestore(&info->lock, flags); -} - -static void rs_start(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_start")) - return; - - spin_lock_irqsave(&info->lock, flags); - if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - spin_unlock_irqrestore(&info->lock, flags); -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * Note: rs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -static DEFINE_SPINLOCK(pio_lock); - -static inline struct esp_pio_buffer *get_pio_buffer(void) -{ - struct esp_pio_buffer *buf; - unsigned long flags; - - spin_lock_irqsave(&pio_lock, flags); - if (free_pio_buf) { - buf = free_pio_buf; - free_pio_buf = buf->next; - } else { - buf = kmalloc(sizeof(struct esp_pio_buffer), GFP_ATOMIC); - } - spin_unlock_irqrestore(&pio_lock, flags); - return buf; -} - -static inline void release_pio_buffer(struct esp_pio_buffer *buf) -{ - unsigned long flags; - spin_lock_irqsave(&pio_lock, flags); - buf->next = free_pio_buf; - free_pio_buf = buf; - spin_unlock_irqrestore(&pio_lock, flags); -} - -static inline void receive_chars_pio(struct esp_struct *info, int num_bytes) -{ - struct tty_struct *tty = info->port.tty; - int i; - struct esp_pio_buffer *pio_buf; - struct esp_pio_buffer *err_buf; - unsigned char status_mask; - - pio_buf = get_pio_buffer(); - - if (!pio_buf) - return; - - err_buf = get_pio_buffer(); - - if (!err_buf) { - release_pio_buffer(pio_buf); - return; - } - - status_mask = (info->read_status_mask >> 2) & 0x07; - - for (i = 0; i < num_bytes - 1; i += 2) { - *((unsigned short *)(pio_buf->data + i)) = - inw(info->io_port + UART_ESI_RX); - err_buf->data[i] = serial_in(info, UART_ESI_RWS); - err_buf->data[i + 1] = (err_buf->data[i] >> 3) & status_mask; - err_buf->data[i] &= status_mask; - } - - if (num_bytes & 0x0001) { - pio_buf->data[num_bytes - 1] = serial_in(info, UART_ESI_RX); - err_buf->data[num_bytes - 1] = - (serial_in(info, UART_ESI_RWS) >> 3) & status_mask; - } - - /* make sure everything is still ok since interrupts were enabled */ - tty = info->port.tty; - - if (!tty) { - release_pio_buffer(pio_buf); - release_pio_buffer(err_buf); - info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; - return; - } - - status_mask = (info->ignore_status_mask >> 2) & 0x07; - - for (i = 0; i < num_bytes; i++) { - if (!(err_buf->data[i] & status_mask)) { - int flag = 0; - - if (err_buf->data[i] & 0x04) { - flag = TTY_BREAK; - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } else if (err_buf->data[i] & 0x02) - flag = TTY_FRAME; - else if (err_buf->data[i] & 0x01) - flag = TTY_PARITY; - tty_insert_flip_char(tty, pio_buf->data[i], flag); - } - } - - tty_schedule_flip(tty); - - info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; - release_pio_buffer(pio_buf); - release_pio_buffer(err_buf); -} - -static void program_isa_dma(int dma, int dir, unsigned long addr, int len) -{ - unsigned long flags; - - flags = claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - set_dma_mode(dma, dir); - set_dma_addr(dma, addr); - set_dma_count(dma, len); - enable_dma(dma); - release_dma_lock(flags); -} - -static void receive_chars_dma(struct esp_struct *info, int num_bytes) -{ - info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; - dma_bytes = num_bytes; - info->stat_flags |= ESP_STAT_DMA_RX; - - program_isa_dma(dma, DMA_MODE_READ, isa_virt_to_bus(dma_buffer), - dma_bytes); - serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX); -} - -static inline void receive_chars_dma_done(struct esp_struct *info, - int status) -{ - struct tty_struct *tty = info->port.tty; - int num_bytes; - unsigned long flags; - - flags = claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - - info->stat_flags &= ~ESP_STAT_DMA_RX; - num_bytes = dma_bytes - get_dma_residue(dma); - release_dma_lock(flags); - - info->icount.rx += num_bytes; - - if (num_bytes > 0) { - tty_insert_flip_string(tty, dma_buffer, num_bytes - 1); - - status &= (0x1c & info->read_status_mask); - - /* Is the status significant or do we throw the last byte ? */ - if (!(status & info->ignore_status_mask)) { - int statflag = 0; - - if (status & 0x10) { - statflag = TTY_BREAK; - (info->icount.brk)++; - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } else if (status & 0x08) { - statflag = TTY_FRAME; - info->icount.frame++; - } else if (status & 0x04) { - statflag = TTY_PARITY; - info->icount.parity++; - } - tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], - statflag); - } - tty_schedule_flip(tty); - } - - if (dma_bytes != num_bytes) { - num_bytes = dma_bytes - num_bytes; - dma_bytes = 0; - receive_chars_dma(info, num_bytes); - } else - dma_bytes = 0; -} - -/* Caller must hold info->lock */ - -static inline void transmit_chars_pio(struct esp_struct *info, - int space_avail) -{ - int i; - struct esp_pio_buffer *pio_buf; - - pio_buf = get_pio_buffer(); - - if (!pio_buf) - return; - - while (space_avail && info->xmit_cnt) { - if (info->xmit_tail + space_avail <= ESP_XMIT_SIZE) { - memcpy(pio_buf->data, - &(info->xmit_buf[info->xmit_tail]), - space_avail); - } else { - i = ESP_XMIT_SIZE - info->xmit_tail; - memcpy(pio_buf->data, - &(info->xmit_buf[info->xmit_tail]), i); - memcpy(&(pio_buf->data[i]), info->xmit_buf, - space_avail - i); - } - - info->xmit_cnt -= space_avail; - info->xmit_tail = (info->xmit_tail + space_avail) & - (ESP_XMIT_SIZE - 1); - - for (i = 0; i < space_avail - 1; i += 2) { - outw(*((unsigned short *)(pio_buf->data + i)), - info->io_port + UART_ESI_TX); - } - - if (space_avail & 0x0001) - serial_out(info, UART_ESI_TX, - pio_buf->data[space_avail - 1]); - - if (info->xmit_cnt) { - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); - space_avail = serial_in(info, UART_ESI_STAT1) << 8; - space_avail |= serial_in(info, UART_ESI_STAT2); - - if (space_avail > info->xmit_cnt) - space_avail = info->xmit_cnt; - } - } - - if (info->xmit_cnt < WAKEUP_CHARS) { - if (info->port.tty) - tty_wakeup(info->port.tty); - -#ifdef SERIAL_DEBUG_INTR - printk("THRE..."); -#endif - - if (info->xmit_cnt <= 0) { - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, - ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - } - - release_pio_buffer(pio_buf); -} - -/* Caller must hold info->lock */ -static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes) -{ - dma_bytes = num_bytes; - - if (info->xmit_tail + dma_bytes <= ESP_XMIT_SIZE) { - memcpy(dma_buffer, &(info->xmit_buf[info->xmit_tail]), - dma_bytes); - } else { - int i = ESP_XMIT_SIZE - info->xmit_tail; - memcpy(dma_buffer, &(info->xmit_buf[info->xmit_tail]), - i); - memcpy(&(dma_buffer[i]), info->xmit_buf, dma_bytes - i); - } - - info->xmit_cnt -= dma_bytes; - info->xmit_tail = (info->xmit_tail + dma_bytes) & (ESP_XMIT_SIZE - 1); - - if (info->xmit_cnt < WAKEUP_CHARS) { - if (info->port.tty) - tty_wakeup(info->port.tty); - -#ifdef SERIAL_DEBUG_INTR - printk("THRE..."); -#endif - - if (info->xmit_cnt <= 0) { - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - } - - info->stat_flags |= ESP_STAT_DMA_TX; - - program_isa_dma(dma, DMA_MODE_WRITE, isa_virt_to_bus(dma_buffer), - dma_bytes); - serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); -} - -static inline void transmit_chars_dma_done(struct esp_struct *info) -{ - int num_bytes; - unsigned long flags; - - flags = claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - - num_bytes = dma_bytes - get_dma_residue(dma); - info->icount.tx += dma_bytes; - release_dma_lock(flags); - - if (dma_bytes != num_bytes) { - dma_bytes -= num_bytes; - memmove(dma_buffer, dma_buffer + num_bytes, dma_bytes); - - program_isa_dma(dma, DMA_MODE_WRITE, - isa_virt_to_bus(dma_buffer), dma_bytes); - - serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); - } else { - dma_bytes = 0; - info->stat_flags &= ~ESP_STAT_DMA_TX; - } -} - -static void check_modem_status(struct esp_struct *info) -{ - int status; - - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - status = serial_in(info, UART_ESI_STAT2); - - if (status & UART_MSR_ANY_DELTA) { - /* update input line counters */ - if (status & UART_MSR_TERI) - info->icount.rng++; - if (status & UART_MSR_DDSR) - info->icount.dsr++; - if (status & UART_MSR_DDCD) - info->icount.dcd++; - if (status & UART_MSR_DCTS) - info->icount.cts++; - wake_up_interruptible(&info->port.delta_msr_wait); - } - - if ((info->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { -#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) - printk("ttys%d CD now %s...", info->line, - (status & UART_MSR_DCD) ? "on" : "off"); -#endif - if (status & UART_MSR_DCD) - wake_up_interruptible(&info->port.open_wait); - else { -#ifdef SERIAL_DEBUG_OPEN - printk("scheduling hangup..."); -#endif - tty_hangup(info->port.tty); - } - } -} - -/* - * This is the serial driver's interrupt routine - */ -static irqreturn_t rs_interrupt_single(int irq, void *dev_id) -{ - struct esp_struct *info; - unsigned err_status; - unsigned int scratch; - -#ifdef SERIAL_DEBUG_INTR - printk("rs_interrupt_single(%d)...", irq); -#endif - info = (struct esp_struct *)dev_id; - err_status = 0; - scratch = serial_in(info, UART_ESI_SID); - - spin_lock(&info->lock); - - if (!info->port.tty) { - spin_unlock(&info->lock); - return IRQ_NONE; - } - - if (scratch & 0x04) { /* error */ - serial_out(info, UART_ESI_CMD1, ESI_GET_ERR_STAT); - err_status = serial_in(info, UART_ESI_STAT1); - serial_in(info, UART_ESI_STAT2); - - if (err_status & 0x01) - info->stat_flags |= ESP_STAT_RX_TIMEOUT; - - if (err_status & 0x20) /* UART status */ - check_modem_status(info); - - if (err_status & 0x80) /* Start break */ - wake_up_interruptible(&info->break_wait); - } - - if ((scratch & 0x88) || /* DMA completed or timed out */ - (err_status & 0x1c) /* receive error */) { - if (info->stat_flags & ESP_STAT_DMA_RX) - receive_chars_dma_done(info, err_status); - else if (info->stat_flags & ESP_STAT_DMA_TX) - transmit_chars_dma_done(info); - } - - if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) && - ((scratch & 0x01) || (info->stat_flags & ESP_STAT_RX_TIMEOUT)) && - (info->IER & UART_IER_RDI)) { - int num_bytes; - - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_RX_AVAIL); - num_bytes = serial_in(info, UART_ESI_STAT1) << 8; - num_bytes |= serial_in(info, UART_ESI_STAT2); - - num_bytes = tty_buffer_request_room(info->port.tty, num_bytes); - - if (num_bytes) { - if (dma_bytes || - (info->stat_flags & ESP_STAT_USE_PIO) || - (num_bytes <= info->config.pio_threshold)) - receive_chars_pio(info, num_bytes); - else - receive_chars_dma(info, num_bytes); - } - } - - if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) && - (scratch & 0x02) && (info->IER & UART_IER_THRI)) { - if ((info->xmit_cnt <= 0) || info->port.tty->stopped) { - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } else { - int num_bytes; - - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); - num_bytes = serial_in(info, UART_ESI_STAT1) << 8; - num_bytes |= serial_in(info, UART_ESI_STAT2); - - if (num_bytes > info->xmit_cnt) - num_bytes = info->xmit_cnt; - - if (num_bytes) { - if (dma_bytes || - (info->stat_flags & ESP_STAT_USE_PIO) || - (num_bytes <= info->config.pio_threshold)) - transmit_chars_pio(info, num_bytes); - else - transmit_chars_dma(info, num_bytes); - } - } - } - - info->last_active = jiffies; - -#ifdef SERIAL_DEBUG_INTR - printk("end.\n"); -#endif - spin_unlock(&info->lock); - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - -/* - * --------------------------------------------------------------- - * Low level utility subroutines for the serial driver: routines to - * figure out the appropriate timeout for an interrupt chain, routines - * to initialize and startup a serial port, and routines to shutdown a - * serial port. Useful stuff like that. - * - * Caller should hold lock - * --------------------------------------------------------------- - */ - -static void esp_basic_init(struct esp_struct *info) -{ - /* put ESPC in enhanced mode */ - serial_out(info, UART_ESI_CMD1, ESI_SET_MODE); - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - serial_out(info, UART_ESI_CMD2, 0x01); - else - serial_out(info, UART_ESI_CMD2, 0x31); - - /* disable interrupts for now */ - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, 0x00); - - /* set interrupt and DMA channel */ - serial_out(info, UART_ESI_CMD1, ESI_SET_IRQ); - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - serial_out(info, UART_ESI_CMD2, 0x01); - else - serial_out(info, UART_ESI_CMD2, (dma << 4) | 0x01); - - serial_out(info, UART_ESI_CMD1, ESI_SET_ENH_IRQ); - - if (info->line % 8) /* secondary port */ - serial_out(info, UART_ESI_CMD2, 0x0d); /* shared */ - else if (info->irq == 9) - serial_out(info, UART_ESI_CMD2, 0x02); - else - serial_out(info, UART_ESI_CMD2, info->irq); - - /* set error status mask (check this) */ - serial_out(info, UART_ESI_CMD1, ESI_SET_ERR_MASK); - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - serial_out(info, UART_ESI_CMD2, 0xa1); - else - serial_out(info, UART_ESI_CMD2, 0xbd); - - serial_out(info, UART_ESI_CMD2, 0x00); - - /* set DMA timeout */ - serial_out(info, UART_ESI_CMD1, ESI_SET_DMA_TMOUT); - serial_out(info, UART_ESI_CMD2, 0xff); - - /* set FIFO trigger levels */ - serial_out(info, UART_ESI_CMD1, ESI_SET_TRIGGER); - serial_out(info, UART_ESI_CMD2, info->config.rx_trigger >> 8); - serial_out(info, UART_ESI_CMD2, info->config.rx_trigger); - serial_out(info, UART_ESI_CMD2, info->config.tx_trigger >> 8); - serial_out(info, UART_ESI_CMD2, info->config.tx_trigger); - - /* Set clock scaling and wait states */ - serial_out(info, UART_ESI_CMD1, ESI_SET_PRESCALAR); - serial_out(info, UART_ESI_CMD2, 0x04 | ESPC_SCALE); - - /* set reinterrupt pacing */ - serial_out(info, UART_ESI_CMD1, ESI_SET_REINTR); - serial_out(info, UART_ESI_CMD2, 0xff); -} - -static int startup(struct esp_struct *info) -{ - unsigned long flags; - int retval = 0; - unsigned int num_chars; - - spin_lock_irqsave(&info->lock, flags); - - if (info->port.flags & ASYNC_INITIALIZED) - goto out; - - if (!info->xmit_buf) { - info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_ATOMIC); - retval = -ENOMEM; - if (!info->xmit_buf) - goto out; - } - -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "starting up ttys%d (irq %d)...", - info->line, info->irq); -#endif - - /* Flush the RX buffer. Using the ESI flush command may cause */ - /* wild interrupts, so read all the data instead. */ - - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_RX_AVAIL); - num_chars = serial_in(info, UART_ESI_STAT1) << 8; - num_chars |= serial_in(info, UART_ESI_STAT2); - - while (num_chars > 1) { - inw(info->io_port + UART_ESI_RX); - num_chars -= 2; - } - - if (num_chars) - serial_in(info, UART_ESI_RX); - - /* set receive character timeout */ - serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, info->config.rx_timeout); - - /* clear all flags except the "never DMA" flag */ - info->stat_flags &= ESP_STAT_NEVER_DMA; - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - info->stat_flags |= ESP_STAT_USE_PIO; - - spin_unlock_irqrestore(&info->lock, flags); - - /* - * Allocate the IRQ - */ - - retval = request_irq(info->irq, rs_interrupt_single, IRQF_SHARED, - "esp serial", info); - - if (retval) { - if (capable(CAP_SYS_ADMIN)) { - if (info->port.tty) - set_bit(TTY_IO_ERROR, - &info->port.tty->flags); - retval = 0; - } - goto out_unlocked; - } - - if (!(info->stat_flags & ESP_STAT_USE_PIO) && !dma_buffer) { - dma_buffer = (char *)__get_dma_pages( - GFP_KERNEL, get_order(DMA_BUFFER_SZ)); - - /* use PIO mode if DMA buf/chan cannot be allocated */ - if (!dma_buffer) - info->stat_flags |= ESP_STAT_USE_PIO; - else if (request_dma(dma, "esp serial")) { - free_pages((unsigned long)dma_buffer, - get_order(DMA_BUFFER_SZ)); - dma_buffer = NULL; - info->stat_flags |= ESP_STAT_USE_PIO; - } - - } - - info->MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - - /* - * Finally, enable interrupts - */ - /* info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; */ - info->IER = UART_IER_RLSI | UART_IER_RDI | UART_IER_DMA_TMOUT | - UART_IER_DMA_TC; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - spin_unlock_irqrestore(&info->lock, flags); - - /* - * Set up the tty->alt_speed kludge - */ - if (info->port.tty) { - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->port.tty->alt_speed = 57600; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->port.tty->alt_speed = 115200; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->port.tty->alt_speed = 230400; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->port.tty->alt_speed = 460800; - } - - /* - * set the speed of the serial port - */ - change_speed(info); - info->port.flags |= ASYNC_INITIALIZED; - return 0; - -out: - spin_unlock_irqrestore(&info->lock, flags); -out_unlocked: - return retval; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(struct esp_struct *info) -{ - unsigned long flags, f; - - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....", info->line, - info->irq); -#endif - - spin_lock_irqsave(&info->lock, flags); - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->port.delta_msr_wait); - wake_up_interruptible(&info->break_wait); - - /* stop a DMA transfer on the port being closed */ - /* DMA lock is higher priority always */ - if (info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) { - f = claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - release_dma_lock(f); - - dma_bytes = 0; - } - - /* - * Free the IRQ - */ - free_irq(info->irq, info); - - if (dma_buffer) { - struct esp_struct *current_port = ports; - - while (current_port) { - if ((current_port != info) && - (current_port->port.flags & ASYNC_INITIALIZED)) - break; - - current_port = current_port->next_port; - } - - if (!current_port) { - free_dma(dma); - free_pages((unsigned long)dma_buffer, - get_order(DMA_BUFFER_SZ)); - dma_buffer = NULL; - } - } - - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - - info->IER = 0; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, 0x00); - - if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) - info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); - - info->MCR &= ~UART_MCR_OUT2; - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&info->lock, flags); -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void change_speed(struct esp_struct *info) -{ - unsigned short port; - int quot = 0; - unsigned cflag, cval; - int baud, bits; - unsigned char flow1 = 0, flow2 = 0; - unsigned long flags; - - if (!info->port.tty || !info->port.tty->termios) - return; - cflag = info->port.tty->termios->c_cflag; - port = info->io_port; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: cval = 0x00; bits = 7; break; - case CS6: cval = 0x01; bits = 8; break; - case CS7: cval = 0x02; bits = 9; break; - case CS8: cval = 0x03; bits = 10; break; - default: cval = 0x00; bits = 7; break; - } - if (cflag & CSTOPB) { - cval |= 0x04; - bits++; - } - if (cflag & PARENB) { - cval |= UART_LCR_PARITY; - bits++; - } - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - baud = tty_get_baud_rate(info->port.tty); - if (baud == 38400 && - ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) - quot = info->custom_divisor; - else { - if (baud == 134) /* Special case since 134 is really 134.5 */ - quot = (2*BASE_BAUD / 269); - else if (baud) - quot = BASE_BAUD / baud; - } - /* If the quotient is ever zero, default to 9600 bps */ - if (!quot) - quot = BASE_BAUD / 9600; - - if (baud) { - /* Actual rate */ - baud = BASE_BAUD/quot; - tty_encode_baud_rate(info->port.tty, baud, baud); - } - info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50); - - /* CTS flow control flag and modem status interrupts */ - /* info->IER &= ~UART_IER_MSI; */ - if (cflag & CRTSCTS) { - info->port.flags |= ASYNC_CTS_FLOW; - /* info->IER |= UART_IER_MSI; */ - flow1 = 0x04; - flow2 = 0x10; - } else - info->port.flags &= ~ASYNC_CTS_FLOW; - if (cflag & CLOCAL) - info->port.flags &= ~ASYNC_CHECK_CD; - else - info->port.flags |= ASYNC_CHECK_CD; - - /* - * Set up parity check flag - */ - info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(info->port.tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= UART_LSR_BI; - - info->ignore_status_mask = 0; -#if 0 - /* This should be safe, but for some broken bits of hardware... */ - if (I_IGNPAR(info->port.tty)) { - info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - info->read_status_mask |= UART_LSR_PE | UART_LSR_FE; - } -#endif - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask |= UART_LSR_BI; - info->read_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) { - info->ignore_status_mask |= UART_LSR_OE | \ - UART_LSR_PE | UART_LSR_FE; - info->read_status_mask |= UART_LSR_OE | \ - UART_LSR_PE | UART_LSR_FE; - } - } - - if (I_IXOFF(info->port.tty)) - flow1 |= 0x81; - - spin_lock_irqsave(&info->lock, flags); - /* set baud */ - serial_out(info, UART_ESI_CMD1, ESI_SET_BAUD); - serial_out(info, UART_ESI_CMD2, quot >> 8); - serial_out(info, UART_ESI_CMD2, quot & 0xff); - - /* set data bits, parity, etc. */ - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_LCR); - serial_out(info, UART_ESI_CMD2, cval); - - /* Enable flow control */ - serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CNTL); - serial_out(info, UART_ESI_CMD2, flow1); - serial_out(info, UART_ESI_CMD2, flow2); - - /* set flow control characters (XON/XOFF only) */ - if (I_IXOFF(info->port.tty)) { - serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CHARS); - serial_out(info, UART_ESI_CMD2, START_CHAR(info->port.tty)); - serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->port.tty)); - serial_out(info, UART_ESI_CMD2, 0x10); - serial_out(info, UART_ESI_CMD2, 0x21); - switch (cflag & CSIZE) { - case CS5: - serial_out(info, UART_ESI_CMD2, 0x1f); - break; - case CS6: - serial_out(info, UART_ESI_CMD2, 0x3f); - break; - case CS7: - case CS8: - serial_out(info, UART_ESI_CMD2, 0x7f); - break; - default: - serial_out(info, UART_ESI_CMD2, 0xff); - break; - } - } - - /* Set high/low water */ - serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_LVL); - serial_out(info, UART_ESI_CMD2, info->config.flow_off >> 8); - serial_out(info, UART_ESI_CMD2, info->config.flow_off); - serial_out(info, UART_ESI_CMD2, info->config.flow_on >> 8); - serial_out(info, UART_ESI_CMD2, info->config.flow_on); - - spin_unlock_irqrestore(&info->lock, flags); -} - -static int rs_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - int ret = 0; - - if (serial_paranoia_check(info, tty->name, "rs_put_char")) - return 0; - - if (!info->xmit_buf) - return 0; - - spin_lock_irqsave(&info->lock, flags); - if (info->xmit_cnt < ESP_XMIT_SIZE - 1) { - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= ESP_XMIT_SIZE-1; - info->xmit_cnt++; - ret = 1; - } - spin_unlock_irqrestore(&info->lock, flags); - return ret; -} - -static void rs_flush_chars(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) - return; - - spin_lock_irqsave(&info->lock, flags); - - if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf) - goto out; - - if (!(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } -out: - spin_unlock_irqrestore(&info->lock, flags); -} - -static int rs_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int c, t, ret = 0; - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_write")) - return 0; - - if (!info->xmit_buf) - return 0; - - while (1) { - /* Thanks to R. Wolff for suggesting how to do this with */ - /* interrupts enabled */ - - c = count; - t = ESP_XMIT_SIZE - info->xmit_cnt - 1; - - if (t < c) - c = t; - - t = ESP_XMIT_SIZE - info->xmit_head; - - if (t < c) - c = t; - - if (c <= 0) - break; - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - - info->xmit_head = (info->xmit_head + c) & (ESP_XMIT_SIZE-1); - info->xmit_cnt += c; - buf += c; - count -= c; - ret += c; - } - - spin_lock_irqsave(&info->lock, flags); - - if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - - spin_unlock_irqrestore(&info->lock, flags); - return ret; -} - -static int rs_write_room(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - int ret; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_write_room")) - return 0; - - spin_lock_irqsave(&info->lock, flags); - - ret = ESP_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - spin_unlock_irqrestore(&info->lock, flags); - return ret; -} - -static int rs_chars_in_buffer(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) - return 0; - return info->xmit_cnt; -} - -static void rs_flush_buffer(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) - return; - spin_lock_irqsave(&info->lock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - spin_unlock_irqrestore(&info->lock, flags); - tty_wakeup(tty); -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_throttle(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), - tty_chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_throttle")) - return; - - spin_lock_irqsave(&info->lock, flags); - info->IER &= ~UART_IER_RDI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, 0x00); - spin_unlock_irqrestore(&info->lock, flags); -} - -static void rs_unthrottle(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk(KERN_DEBUG "unthrottle %s: %d....\n", tty_name(tty, buf), - tty_chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) - return; - - spin_lock_irqsave(&info->lock, flags); - info->IER |= UART_IER_RDI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, info->config.rx_timeout); - spin_unlock_irqrestore(&info->lock, flags); -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int get_serial_info(struct esp_struct *info, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - lock_kernel(); - memset(&tmp, 0, sizeof(tmp)); - tmp.type = PORT_16550A; - tmp.line = info->line; - tmp.port = info->io_port; - tmp.irq = info->irq; - tmp.flags = info->port.flags; - tmp.xmit_fifo_size = 1024; - tmp.baud_base = BASE_BAUD; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - tmp.hub6 = 0; - unlock_kernel(); - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int get_esp_config(struct esp_struct *info, - struct hayes_esp_config __user *retinfo) -{ - struct hayes_esp_config tmp; - - if (!retinfo) - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); - lock_kernel(); - tmp.rx_timeout = info->config.rx_timeout; - tmp.rx_trigger = info->config.rx_trigger; - tmp.tx_trigger = info->config.tx_trigger; - tmp.flow_off = info->config.flow_off; - tmp.flow_on = info->config.flow_on; - tmp.pio_threshold = info->config.pio_threshold; - tmp.dma_channel = (info->stat_flags & ESP_STAT_NEVER_DMA ? 0 : dma); - unlock_kernel(); - - return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; -} - -static int set_serial_info(struct esp_struct *info, - struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - struct esp_struct old_info; - unsigned int change_irq; - int retval = 0; - struct esp_struct *current_async; - - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - old_info = *info; - - if ((new_serial.type != PORT_16550A) || - (new_serial.hub6) || - (info->io_port != new_serial.port) || - (new_serial.baud_base != BASE_BAUD) || - (new_serial.irq > 15) || - (new_serial.irq < 2) || - (new_serial.irq == 6) || - (new_serial.irq == 8) || - (new_serial.irq == 13)) - return -EINVAL; - - change_irq = new_serial.irq != info->irq; - - if (change_irq && (info->line % 8)) - return -EINVAL; - - if (!capable(CAP_SYS_ADMIN)) { - if (change_irq || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (info->port.flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - info->custom_divisor = new_serial.custom_divisor; - } else { - if (new_serial.irq == 2) - new_serial.irq = 9; - - if (change_irq) { - current_async = ports; - - while (current_async) { - if ((current_async->line >= info->line) && - (current_async->line < (info->line + 8))) { - if (current_async == info) { - if (current_async->port.count > 1) - return -EBUSY; - } else if (current_async->port.count) - return -EBUSY; - } - - current_async = current_async->next_port; - } - } - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->custom_divisor = new_serial.custom_divisor; - info->close_delay = new_serial.close_delay * HZ/100; - info->closing_wait = new_serial.closing_wait * HZ/100; - - if (change_irq) { - /* - * We need to shutdown the serial port at the old - * port/irq combination. - */ - shutdown(info); - - current_async = ports; - - while (current_async) { - if ((current_async->line >= info->line) && - (current_async->line < (info->line + 8))) - current_async->irq = new_serial.irq; - - current_async = current_async->next_port; - } - - serial_out(info, UART_ESI_CMD1, ESI_SET_ENH_IRQ); - if (info->irq == 9) - serial_out(info, UART_ESI_CMD2, 0x02); - else - serial_out(info, UART_ESI_CMD2, info->irq); - } - } - - if (info->port.flags & ASYNC_INITIALIZED) { - if (((old_info.port.flags & ASYNC_SPD_MASK) != - (info->port.flags & ASYNC_SPD_MASK)) || - (old_info.custom_divisor != info->custom_divisor)) { - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->port.tty->alt_speed = 57600; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->port.tty->alt_speed = 115200; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->port.tty->alt_speed = 230400; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->port.tty->alt_speed = 460800; - change_speed(info); - } - } else - retval = startup(info); - - return retval; -} - -static int set_esp_config(struct esp_struct *info, - struct hayes_esp_config __user *new_info) -{ - struct hayes_esp_config new_config; - unsigned int change_dma; - int retval = 0; - struct esp_struct *current_async; - unsigned long flags; - - /* Perhaps a non-sysadmin user should be able to do some of these */ - /* operations. I haven't decided yet. */ - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - if (copy_from_user(&new_config, new_info, sizeof(new_config))) - return -EFAULT; - - if ((new_config.flow_on >= new_config.flow_off) || - (new_config.rx_trigger < 1) || - (new_config.tx_trigger < 1) || - (new_config.flow_off < 1) || - (new_config.flow_on < 1) || - (new_config.rx_trigger > 1023) || - (new_config.tx_trigger > 1023) || - (new_config.flow_off > 1023) || - (new_config.flow_on > 1023) || - (new_config.pio_threshold < 0) || - (new_config.pio_threshold > 1024)) - return -EINVAL; - - if ((new_config.dma_channel != 1) && (new_config.dma_channel != 3)) - new_config.dma_channel = 0; - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - change_dma = new_config.dma_channel; - else - change_dma = (new_config.dma_channel != dma); - - if (change_dma) { - if (new_config.dma_channel) { - /* PIO mode to DMA mode transition OR */ - /* change current DMA channel */ - current_async = ports; - - while (current_async) { - if (current_async == info) { - if (current_async->port.count > 1) - return -EBUSY; - } else if (current_async->port.count) - return -EBUSY; - - current_async = current_async->next_port; - } - - shutdown(info); - dma = new_config.dma_channel; - info->stat_flags &= ~ESP_STAT_NEVER_DMA; - - /* all ports must use the same DMA channel */ - - spin_lock_irqsave(&info->lock, flags); - current_async = ports; - - while (current_async) { - esp_basic_init(current_async); - current_async = current_async->next_port; - } - spin_unlock_irqrestore(&info->lock, flags); - } else { - /* DMA mode to PIO mode only */ - if (info->port.count > 1) - return -EBUSY; - - shutdown(info); - spin_lock_irqsave(&info->lock, flags); - info->stat_flags |= ESP_STAT_NEVER_DMA; - esp_basic_init(info); - spin_unlock_irqrestore(&info->lock, flags); - } - } - - info->config.pio_threshold = new_config.pio_threshold; - - if ((new_config.flow_off != info->config.flow_off) || - (new_config.flow_on != info->config.flow_on)) { - info->config.flow_off = new_config.flow_off; - info->config.flow_on = new_config.flow_on; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_LVL); - serial_out(info, UART_ESI_CMD2, new_config.flow_off >> 8); - serial_out(info, UART_ESI_CMD2, new_config.flow_off); - serial_out(info, UART_ESI_CMD2, new_config.flow_on >> 8); - serial_out(info, UART_ESI_CMD2, new_config.flow_on); - spin_unlock_irqrestore(&info->lock, flags); - } - - if ((new_config.rx_trigger != info->config.rx_trigger) || - (new_config.tx_trigger != info->config.tx_trigger)) { - info->config.rx_trigger = new_config.rx_trigger; - info->config.tx_trigger = new_config.tx_trigger; - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_SET_TRIGGER); - serial_out(info, UART_ESI_CMD2, - new_config.rx_trigger >> 8); - serial_out(info, UART_ESI_CMD2, new_config.rx_trigger); - serial_out(info, UART_ESI_CMD2, - new_config.tx_trigger >> 8); - serial_out(info, UART_ESI_CMD2, new_config.tx_trigger); - spin_unlock_irqrestore(&info->lock, flags); - } - - if (new_config.rx_timeout != info->config.rx_timeout) { - info->config.rx_timeout = new_config.rx_timeout; - spin_lock_irqsave(&info->lock, flags); - - if (info->IER & UART_IER_RDI) { - serial_out(info, UART_ESI_CMD1, - ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, - new_config.rx_timeout); - } - - spin_unlock_irqrestore(&info->lock, flags); - } - - if (!(info->port.flags & ASYNC_INITIALIZED)) - retval = startup(info); - - return retval; -} - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct esp_struct *info, unsigned int __user *value) -{ - unsigned char status; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - status = serial_in(info, UART_ESI_STAT1); - spin_unlock_irqrestore(&info->lock, flags); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} - - -static int esp_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct esp_struct *info = tty->driver_data; - unsigned char control, status; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - control = info->MCR; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - status = serial_in(info, UART_ESI_STAT2); - spin_unlock_irqrestore(&info->lock, flags); - - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) - | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) - | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) - | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) - | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) - | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -} - -static int esp_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - spin_lock_irqsave(&info->lock, flags); - - if (set & TIOCM_RTS) - info->MCR |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->MCR |= UART_MCR_DTR; - - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; - - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -/* - * rs_break() --- routine which turns the break handling on or off - */ -static int esp_break(struct tty_struct *tty, int break_state) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "esp_break")) - return -EINVAL; - - if (break_state == -1) { - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_ISSUE_BREAK); - serial_out(info, UART_ESI_CMD2, 0x01); - spin_unlock_irqrestore(&info->lock, flags); - - /* FIXME - new style wait needed here */ - interruptible_sleep_on(&info->break_wait); - } else { - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_ISSUE_BREAK); - serial_out(info, UART_ESI_CMD2, 0x00); - spin_unlock_irqrestore(&info->lock, flags); - } - return 0; -} - -static int rs_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct esp_struct *info = tty->driver_data; - struct async_icount cprev, cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; /* user space */ - void __user *argp = (void __user *)arg; - unsigned long flags; - int ret; - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && - (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT) && - (cmd != TIOCGHAYESESP) && (cmd != TIOCSHAYESESP)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TIOCGSERIAL: - return get_serial_info(info, argp); - case TIOCSSERIAL: - lock_kernel(); - ret = set_serial_info(info, argp); - unlock_kernel(); - return ret; - case TIOCSERGWILD: - return put_user(0L, (unsigned long __user *)argp); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, argp); - case TIOCSERSWILD: - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - return 0; - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - spin_lock_irqsave(&info->lock, flags); - cprev = info->icount; /* note the counters on entry */ - spin_unlock_irqrestore(&info->lock, flags); - while (1) { - /* FIXME: convert to new style wakeup */ - interruptible_sleep_on(&info->port.delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - spin_lock_irqsave(&info->lock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->lock, flags); - if (cnow.rng == cprev.rng && - cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && - cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && - (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && - (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && - (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && - (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - spin_lock_irqsave(&info->lock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock, flags); - p_cuser = argp; - if (put_user(cnow.cts, &p_cuser->cts) || - put_user(cnow.dsr, &p_cuser->dsr) || - put_user(cnow.rng, &p_cuser->rng) || - put_user(cnow.dcd, &p_cuser->dcd)) - return -EFAULT; - return 0; - case TIOCGHAYESESP: - return get_esp_config(info, argp); - case TIOCSHAYESESP: - lock_kernel(); - ret = set_esp_config(info, argp); - unlock_kernel(); - return ret; - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - change_speed(info); - - spin_lock_irqsave(&info->lock, flags); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && - !(tty->termios->c_cflag & CBAUD)) { - info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - (tty->termios->c_cflag & CBAUD)) { - info->MCR |= (UART_MCR_DTR | UART_MCR_RTS); - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - } - - spin_unlock_irqrestore(&info->lock, flags); - - /* Handle turning of CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - rs_start(tty); - } -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void rs_close(struct tty_struct *tty, struct file *filp) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) - return; - - spin_lock_irqsave(&info->lock, flags); - - if (tty_hung_up_p(filp)) { - DBG_CNT("before DEC-hung"); - goto out; - } - -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "rs_close ttys%d, count = %d\n", - info->line, info->port.count); -#endif - if (tty->count == 1 && info->port.count != 1) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n", - info->line, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - DBG_CNT("before DEC-2"); - goto out; - } - info->port.flags |= ASYNC_CLOSING; - - spin_unlock_irqrestore(&info->lock, flags); - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - /* info->IER &= ~UART_IER_RLSI; */ - info->IER &= ~UART_IER_RDI; - info->read_status_mask &= ~UART_LSR_DR; - if (info->port.flags & ASYNC_INITIALIZED) { - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - - /* disable receive timeout */ - serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, 0x00); - - spin_unlock_irqrestore(&info->lock, flags); - - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - rs_wait_until_sent(tty, info->timeout); - } - shutdown(info); - rs_flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->close_delay) - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - wake_up_interruptible(&info->port.open_wait); - } - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->port.close_wait); - return; - -out: - spin_unlock_irqrestore(&info->lock, flags); -} - -static void rs_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct esp_struct *info = tty->driver_data; - unsigned long orig_jiffies, char_time; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) - return; - - orig_jiffies = jiffies; - char_time = ((info->timeout - HZ / 50) / 1024) / 5; - - if (!char_time) - char_time = 1; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); - - while ((serial_in(info, UART_ESI_STAT1) != 0x03) || - (serial_in(info, UART_ESI_STAT2) != 0xff)) { - - spin_unlock_irqrestore(&info->lock, flags); - msleep_interruptible(jiffies_to_msecs(char_time)); - - if (signal_pending(current)) - return; - - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - return; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); - } - spin_unlock_irqrestore(&info->lock, flags); - set_current_state(TASK_RUNNING); -} - -/* - * esp_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void esp_hangup(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "esp_hangup")) - return; - - rs_flush_buffer(tty); - shutdown(info); - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->port.open_wait); -} - -static int esp_carrier_raised(struct tty_port *port) -{ - struct esp_struct *info = container_of(port, struct esp_struct, port); - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD) - return 1; - return 0; -} - -/* - * ------------------------------------------------------------ - * esp_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct esp_struct *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - int cd; - struct tty_port *port = &info->port; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (port->flags & ASYNC_CLOSING)) { - if (port->flags & ASYNC_CLOSING) - interruptible_sleep_on(&port->close_wait); -#ifdef SERIAL_DO_RESTART - if (port->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n", - info->line, port->count); -#endif - spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) - port->count--; - port->blocked_open++; - while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - unsigned int scratch; - - serial_out(info, UART_ESI_CMD1, ESI_READ_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - scratch = serial_in(info, UART_ESI_STAT1); - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, - scratch | UART_MCR_DTR | UART_MCR_RTS); - } - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (port->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - - cd = tty_port_carrier_raised(port); - - if (!(port->flags & ASYNC_CLOSING) && - (do_clocal)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n", - info->line, port->count); -#endif - spin_unlock_irqrestore(&info->lock, flags); - schedule(); - spin_lock_irqsave(&info->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - spin_unlock_irqrestore(&info->lock, flags); -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n", - info->line, port->count); -#endif - if (retval) - return retval; - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int esp_open(struct tty_struct *tty, struct file *filp) -{ - struct esp_struct *info; - int retval, line; - unsigned long flags; - - line = tty->index; - if ((line < 0) || (line >= NR_PORTS)) - return -ENODEV; - - /* find the port in the chain */ - - info = ports; - - while (info && (info->line != line)) - info = info->next_port; - - if (!info) { - serial_paranoia_check(info, tty->name, "esp_open"); - return -ENODEV; - } - -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->port.count); -#endif - spin_lock_irqsave(&info->lock, flags); - info->port.count++; - tty->driver_data = info; - info->port.tty = tty; - - spin_unlock_irqrestore(&info->lock, flags); - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) - return retval; - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "esp_open returning after block_til_ready with %d\n", - retval); -#endif - return retval; - } -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "esp_open %s successful...", tty->name); -#endif - return 0; -} - -/* - * --------------------------------------------------------------------- - * espserial_init() and friends - * - * espserial_init() is called at boot-time to initialize the serial driver. - * --------------------------------------------------------------------- - */ - -/* - * This routine prints out the appropriate serial driver version - * number, and identifies which options were configured into this - * driver. - */ - -static void __init show_serial_version(void) -{ - printk(KERN_INFO "%s version %s (DMA %u)\n", - serial_name, serial_version, dma); -} - -/* - * This routine is called by espserial_init() to initialize a specific serial - * port. - */ -static int autoconfig(struct esp_struct *info) -{ - int port_detected = 0; - unsigned long flags; - - if (!request_region(info->io_port, REGION_SIZE, "esp serial")) - return -EIO; - - spin_lock_irqsave(&info->lock, flags); - /* - * Check for ESP card - */ - - if (serial_in(info, UART_ESI_BASE) == 0xf3) { - serial_out(info, UART_ESI_CMD1, 0x00); - serial_out(info, UART_ESI_CMD1, 0x01); - - if ((serial_in(info, UART_ESI_STAT2) & 0x70) == 0x20) { - port_detected = 1; - - if (!(info->irq)) { - serial_out(info, UART_ESI_CMD1, 0x02); - - if (serial_in(info, UART_ESI_STAT1) & 0x01) - info->irq = 3; - else - info->irq = 4; - } - - - /* put card in enhanced mode */ - /* this prevents access through */ - /* the "old" IO ports */ - esp_basic_init(info); - - /* clear out MCR */ - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, 0x00); - } - } - if (!port_detected) - release_region(info->io_port, REGION_SIZE); - - spin_unlock_irqrestore(&info->lock, flags); - return (port_detected); -} - -static const struct tty_operations esp_ops = { - .open = esp_open, - .close = rs_close, - .write = rs_write, - .put_char = rs_put_char, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .set_termios = rs_set_termios, - .stop = rs_stop, - .start = rs_start, - .hangup = esp_hangup, - .break_ctl = esp_break, - .wait_until_sent = rs_wait_until_sent, - .tiocmget = esp_tiocmget, - .tiocmset = esp_tiocmset, -}; - -static const struct tty_port_operations esp_port_ops = { - .esp_carrier_raised, -}; - -/* - * The serial driver boot-time initialization code! - */ -static int __init espserial_init(void) -{ - int i, offset; - struct esp_struct *info; - struct esp_struct *last_primary = NULL; - int esp[] = { 0x100, 0x140, 0x180, 0x200, 0x240, 0x280, 0x300, 0x380 }; - - esp_driver = alloc_tty_driver(NR_PORTS); - if (!esp_driver) - return -ENOMEM; - - for (i = 0; i < NR_PRIMARY; i++) { - if (irq[i] != 0) { - if ((irq[i] < 2) || (irq[i] > 15) || (irq[i] == 6) || - (irq[i] == 8) || (irq[i] == 13)) - irq[i] = 0; - else if (irq[i] == 2) - irq[i] = 9; - } - } - - if ((dma != 1) && (dma != 3)) - dma = 0; - - if ((rx_trigger < 1) || (rx_trigger > 1023)) - rx_trigger = 768; - - if ((tx_trigger < 1) || (tx_trigger > 1023)) - tx_trigger = 768; - - if ((flow_off < 1) || (flow_off > 1023)) - flow_off = 1016; - - if ((flow_on < 1) || (flow_on > 1023)) - flow_on = 944; - - if ((rx_timeout < 0) || (rx_timeout > 255)) - rx_timeout = 128; - - if (flow_on >= flow_off) - flow_on = flow_off - 1; - - show_serial_version(); - - /* Initialize the tty_driver structure */ - - esp_driver->owner = THIS_MODULE; - esp_driver->name = "ttyP"; - esp_driver->major = ESP_IN_MAJOR; - esp_driver->minor_start = 0; - esp_driver->type = TTY_DRIVER_TYPE_SERIAL; - esp_driver->subtype = SERIAL_TYPE_NORMAL; - esp_driver->init_termios = tty_std_termios; - esp_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - esp_driver->init_termios.c_ispeed = 9600; - esp_driver->init_termios.c_ospeed = 9600; - esp_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(esp_driver, &esp_ops); - if (tty_register_driver(esp_driver)) { - printk(KERN_ERR "Couldn't register esp serial driver"); - put_tty_driver(esp_driver); - return 1; - } - - info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL); - - if (!info) { - printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); - tty_unregister_driver(esp_driver); - put_tty_driver(esp_driver); - return 1; - } - - spin_lock_init(&info->lock); - /* rx_trigger, tx_trigger are needed by autoconfig */ - info->config.rx_trigger = rx_trigger; - info->config.tx_trigger = tx_trigger; - - i = 0; - offset = 0; - - do { - tty_port_init(&info->port); - info->port.ops = &esp_port_ops; - info->io_port = esp[i] + offset; - info->irq = irq[i]; - info->line = (i * 8) + (offset / 8); - - if (!autoconfig(info)) { - i++; - offset = 0; - continue; - } - - info->custom_divisor = (divisor[i] >> (offset / 2)) & 0xf; - info->port.flags = STD_COM_FLAGS; - if (info->custom_divisor) - info->port.flags |= ASYNC_SPD_CUST; - info->magic = ESP_MAGIC; - info->close_delay = 5*HZ/10; - info->closing_wait = 30*HZ; - info->config.rx_timeout = rx_timeout; - info->config.flow_on = flow_on; - info->config.flow_off = flow_off; - info->config.pio_threshold = pio_threshold; - info->next_port = ports; - init_waitqueue_head(&info->break_wait); - ports = info; - printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ", - info->line, info->io_port, info->irq); - - if (info->line % 8) { - printk("secondary port\n"); - /* 8 port cards can't do DMA */ - info->stat_flags |= ESP_STAT_NEVER_DMA; - - if (last_primary) - last_primary->stat_flags |= ESP_STAT_NEVER_DMA; - } else { - printk("primary port\n"); - last_primary = info; - irq[i] = info->irq; - } - - if (!dma) - info->stat_flags |= ESP_STAT_NEVER_DMA; - - info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL); - if (!info) { - printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); - /* allow use of the already detected ports */ - return 0; - } - - spin_lock_init(&info->lock); - /* rx_trigger, tx_trigger are needed by autoconfig */ - info->config.rx_trigger = rx_trigger; - info->config.tx_trigger = tx_trigger; - - if (offset == 56) { - i++; - offset = 0; - } else { - offset += 8; - } - } while (i < NR_PRIMARY); - - /* free the last port memory allocation */ - kfree(info); - - return 0; -} - -static void __exit espserial_exit(void) -{ - int e1; - struct esp_struct *temp_async; - struct esp_pio_buffer *pio_buf; - - e1 = tty_unregister_driver(esp_driver); - if (e1) - printk(KERN_ERR "esp: failed to unregister driver (%d)\n", e1); - put_tty_driver(esp_driver); - - while (ports) { - if (ports->io_port) - release_region(ports->io_port, REGION_SIZE); - temp_async = ports->next_port; - kfree(ports); - ports = temp_async; - } - - if (dma_buffer) - free_pages((unsigned long)dma_buffer, - get_order(DMA_BUFFER_SZ)); - - while (free_pio_buf) { - pio_buf = free_pio_buf->next; - kfree(free_pio_buf); - free_pio_buf = pio_buf; - } -} - -module_init(espserial_init); -module_exit(espserial_exit); diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 5a5385749e1..f72914db2a1 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -214,7 +214,6 @@ unifdef-y += futex.h unifdef-y += fs.h unifdef-y += gameport.h unifdef-y += generic_serial.h -unifdef-y += hayesesp.h unifdef-y += hdlcdrv.h unifdef-y += hdlc.h unifdef-y += hdreg.h diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h deleted file mode 100644 index 92b08cfe4a7..00000000000 --- a/include/linux/hayesesp.h +++ /dev/null @@ -1,114 +0,0 @@ -#ifndef HAYESESP_H -#define HAYESESP_H - -struct hayes_esp_config { - short flow_on; - short flow_off; - short rx_trigger; - short tx_trigger; - short pio_threshold; - unsigned char rx_timeout; - char dma_channel; -}; - -#ifdef __KERNEL__ - -#define ESP_DMA_CHANNEL 0 -#define ESP_RX_TRIGGER 768 -#define ESP_TX_TRIGGER 768 -#define ESP_FLOW_OFF 1016 -#define ESP_FLOW_ON 944 -#define ESP_RX_TMOUT 128 -#define ESP_PIO_THRESHOLD 32 - -#define ESP_IN_MAJOR 57 /* major dev # for dial in */ -#define ESP_OUT_MAJOR 58 /* major dev # for dial out */ -#define ESPC_SCALE 3 -#define UART_ESI_BASE 0x00 -#define UART_ESI_SID 0x01 -#define UART_ESI_RX 0x02 -#define UART_ESI_TX 0x02 -#define UART_ESI_CMD1 0x04 -#define UART_ESI_CMD2 0x05 -#define UART_ESI_STAT1 0x04 -#define UART_ESI_STAT2 0x05 -#define UART_ESI_RWS 0x07 - -#define UART_IER_DMA_TMOUT 0x80 -#define UART_IER_DMA_TC 0x08 - -#define ESI_SET_IRQ 0x04 -#define ESI_SET_DMA_TMOUT 0x05 -#define ESI_SET_SRV_MASK 0x06 -#define ESI_SET_ERR_MASK 0x07 -#define ESI_SET_FLOW_CNTL 0x08 -#define ESI_SET_FLOW_CHARS 0x09 -#define ESI_SET_FLOW_LVL 0x0a -#define ESI_SET_TRIGGER 0x0b -#define ESI_SET_RX_TIMEOUT 0x0c -#define ESI_SET_FLOW_TMOUT 0x0d -#define ESI_WRITE_UART 0x0e -#define ESI_READ_UART 0x0f -#define ESI_SET_MODE 0x10 -#define ESI_GET_ERR_STAT 0x12 -#define ESI_GET_UART_STAT 0x13 -#define ESI_GET_RX_AVAIL 0x14 -#define ESI_GET_TX_AVAIL 0x15 -#define ESI_START_DMA_RX 0x16 -#define ESI_START_DMA_TX 0x17 -#define ESI_ISSUE_BREAK 0x1a -#define ESI_FLUSH_RX 0x1b -#define ESI_FLUSH_TX 0x1c -#define ESI_SET_BAUD 0x1d -#define ESI_SET_ENH_IRQ 0x1f -#define ESI_SET_REINTR 0x20 -#define ESI_SET_PRESCALAR 0x23 -#define ESI_NO_COMMAND 0xff - -#define ESP_STAT_RX_TIMEOUT 0x01 -#define ESP_STAT_DMA_RX 0x02 -#define ESP_STAT_DMA_TX 0x04 -#define ESP_STAT_NEVER_DMA 0x08 -#define ESP_STAT_USE_PIO 0x10 - -#define ESP_MAGIC 0x53ee -#define ESP_XMIT_SIZE 4096 - -struct esp_struct { - int magic; - struct tty_port port; - spinlock_t lock; - int io_port; - int irq; - int read_status_mask; - int ignore_status_mask; - int timeout; - int stat_flags; - int custom_divisor; - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - int IER; /* Interrupt Enable Register */ - int MCR; /* Modem control register */ - unsigned long last_active; - int line; - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - wait_queue_head_t break_wait; - struct async_icount icount; /* kernel counters for the 4 input interrupts */ - struct hayes_esp_config config; /* port configuration */ - struct esp_struct *next_port; /* For the linked list */ -}; - -struct esp_pio_buffer { - unsigned char data[1024]; - struct esp_pio_buffer *next; -}; - -#endif /* __KERNEL__ */ - - -#endif /* ESP_H */ - -- cgit v1.2.3 From 626875381e9ef7fde0717841edcb532033e1c7c9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 13 Oct 2009 16:34:06 +0100 Subject: tty: istallion: Kill off the BKL ioctl Fairly trivial as the BKL push down into the methods has already been done. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/istallion.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 402838f4083..babfd4401f6 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -621,7 +621,7 @@ static int stli_brdinit(struct stlibrd *brdp); static int stli_startbrd(struct stlibrd *brdp); static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp); static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp); -static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); +static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp); static void stli_poll(unsigned long arg); static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); @@ -704,7 +704,7 @@ static const struct file_operations stli_fsiomem = { .owner = THIS_MODULE, .read = stli_memread, .write = stli_memwrite, - .ioctl = stli_memioctl, + .unlocked_ioctl = stli_memioctl, }; /*****************************************************************************/ @@ -4311,7 +4311,7 @@ static int stli_getbrdstruct(struct stlibrd __user *arg) * reset it, and start/stop it. */ -static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg) +static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) { struct stlibrd *brdp; int brdnr, rc, done; @@ -4356,7 +4356,7 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un * Now handle the board specific ioctls. These all depend on the * minor number of the device they were called from. */ - brdnr = iminor(ip); + brdnr = iminor(fp->f_dentry->d_inode); if (brdnr >= STL_MAXBRDS) return -ENODEV; brdp = stli_brds[brdnr]; -- cgit v1.2.3 From 894cb91770f7794f1a17db4df2d83999b197da24 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 13 Oct 2009 16:34:15 +0100 Subject: tty: stallion: kill BKL ioctl Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/stallion.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index db6dcfa35ba..b4ba5edea33 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -407,7 +407,7 @@ static unsigned int stl_baudrates[] = { * Declare all those functions in this driver! */ -static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); +static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); static int stl_brdinit(struct stlbrd *brdp); static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp); static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); @@ -607,7 +607,7 @@ static unsigned int sc26198_baudtable[] = { */ static const struct file_operations stl_fsiomem = { .owner = THIS_MODULE, - .ioctl = stl_memioctl, + .unlocked_ioctl = stl_memioctl, }; static struct class *stallion_class; @@ -2486,18 +2486,19 @@ static int stl_getbrdstruct(struct stlbrd __user *arg) * collection. */ -static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg) +static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) { int brdnr, rc; void __user *argp = (void __user *)arg; - pr_debug("stl_memioctl(ip=%p,fp=%p,cmd=%x,arg=%lx)\n", ip, fp, cmd,arg); + pr_debug("stl_memioctl(fp=%p,cmd=%x,arg=%lx)\n", fp, cmd,arg); - brdnr = iminor(ip); + brdnr = iminor(fp->f_dentry->d_inode); if (brdnr >= STL_MAXBRDS) return -ENODEV; rc = 0; + lock_kernel(); switch (cmd) { case COM_GETPORTSTATS: rc = stl_getportstats(NULL, NULL, argp); @@ -2518,7 +2519,7 @@ static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, uns rc = -ENOIOCTLCMD; break; } - + unlock_kernel(); return rc; } -- cgit v1.2.3 From 64bc397914265a9ead8d73b63bb31ab3bdd25f67 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Oct 2009 16:06:11 +0100 Subject: tty_port: add "tty_port_open" helper For the moment this just moves the USB logic over and fixes the 'what if we open and hangup at the same time' race noticed by Oliver Neukum. Signed-off-by: Alan Cox Cc: Alan Stern Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 36 +++++++++++++++++++++++++++++- drivers/usb/serial/usb-serial.c | 49 +++++++++++++++++------------------------ include/linux/tty.h | 10 ++++++++- 3 files changed, 64 insertions(+), 31 deletions(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index c63f3d33914..b22a61a4fbe 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -99,10 +99,11 @@ EXPORT_SYMBOL(tty_port_tty_set); static void tty_port_shutdown(struct tty_port *port) { + mutex_lock(&port->mutex); if (port->ops->shutdown && test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) port->ops->shutdown(port); - + mutex_unlock(&port->mutex); } /** @@ -381,3 +382,36 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty, tty_port_tty_set(port, NULL); } EXPORT_SYMBOL(tty_port_close); + +int tty_port_open(struct tty_port *port, struct tty_struct *tty, + struct file *filp) +{ + spin_lock_irq(&port->lock); + if (!tty_hung_up_p(filp)) + ++port->count; + spin_unlock_irq(&port->lock); + tty_port_tty_set(port, tty); + + /* + * Do the device-specific open only if the hardware isn't + * already initialized. Serialize open and shutdown using the + * port mutex. + */ + + mutex_lock(&port->mutex); + + if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) { + if (port->ops->activate) { + int retval = port->ops->activate(port, tty); + if (retval) { + mutex_unlock(&port->mutex); + return retval; + } + } + set_bit(ASYNCB_INITIALIZED, &port->flags); + } + mutex_unlock(&port->mutex); + return tty_port_block_til_ready(port, tty, filp); +} + +EXPORT_SYMBOL(tty_port_open); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index bd3fa7ff15b..b0649d92251 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -247,41 +247,31 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) return retval; } -static int serial_open(struct tty_struct *tty, struct file *filp) +static int serial_activate(struct tty_port *tport, struct tty_struct *tty) { - struct usb_serial_port *port = tty->driver_data; + struct usb_serial_port *port = + container_of(tport, struct usb_serial_port, port); struct usb_serial *serial = port->serial; int retval; - dbg("%s - port %d", __func__, port->number); - - spin_lock_irq(&port->port.lock); - if (!tty_hung_up_p(filp)) - ++port->port.count; - spin_unlock_irq(&port->port.lock); - tty_port_tty_set(&port->port, tty); + if (mutex_lock_interruptible(&port->mutex)) + return -ERESTARTSYS; + mutex_lock(&serial->disc_mutex); + if (serial->disconnected) + retval = -ENODEV; + else + retval = port->serial->type->open(tty, port); + mutex_unlock(&serial->disc_mutex); + mutex_unlock(&port->mutex); + return retval; +} - /* Do the device-specific open only if the hardware isn't - * already initialized. - */ - if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) { - if (mutex_lock_interruptible(&port->mutex)) - return -ERESTARTSYS; - mutex_lock(&serial->disc_mutex); - if (serial->disconnected) - retval = -ENODEV; - else - retval = port->serial->type->open(tty, port); - mutex_unlock(&serial->disc_mutex); - mutex_unlock(&port->mutex); - if (retval) - return retval; - set_bit(ASYNCB_INITIALIZED, &port->port.flags); - } +static int serial_open(struct tty_struct *tty, struct file *filp) +{ + struct usb_serial_port *port = tty->driver_data; - /* Now do the correct tty layer semantics */ - retval = tty_port_block_til_ready(&port->port, tty, filp); - return retval; + dbg("%s - port %d", __func__, port->number); + return tty_port_open(&port->port, tty, filp); } /** @@ -725,6 +715,7 @@ static void serial_dtr_rts(struct tty_port *port, int on) static const struct tty_port_operations serial_port_ops = { .carrier_raised = serial_carrier_raised, .dtr_rts = serial_dtr_rts, + .activate = serial_activate, }; int usb_serial_probe(struct usb_interface *interface, diff --git a/include/linux/tty.h b/include/linux/tty.h index f0f43d08d8b..6352ac257fc 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -190,9 +190,15 @@ struct tty_port_operations { /* Control the DTR line */ void (*dtr_rts)(struct tty_port *port, int raise); /* Called when the last close completes or a hangup finishes - IFF the port was initialized. Do not use to free resources */ + IFF the port was initialized. Do not use to free resources. Called + under the port mutex to serialize against activate/shutdowns */ void (*shutdown)(struct tty_port *port); void (*drop)(struct tty_port *port); + /* Called under the port mutex from tty_port_open, serialized using + the port mutex */ + /* FIXME: long term getting the tty argument *out* of this would be + good for consoles */ + int (*activate)(struct tty_port *port, struct tty_struct *tty); }; struct tty_port { @@ -467,6 +473,8 @@ extern int tty_port_close_start(struct tty_port *port, extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty); extern void tty_port_close(struct tty_port *port, struct tty_struct *tty, struct file *filp); +extern int tty_port_open(struct tty_port *port, + struct tty_struct *tty, struct file *filp); extern inline int tty_port_users(struct tty_port *port) { return port->count + port->blocked_open; -- cgit v1.2.3 From d774a56d2353933cf21cc92a9d0012c7b69d09bf Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Oct 2009 16:06:21 +0100 Subject: tty_port: coding style cleaning pass Mind the hoover wire... Signed-off-by: Alan Cox Cc: Alan Stern Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index b22a61a4fbe..41b314cfda4 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -199,7 +199,7 @@ EXPORT_SYMBOL(tty_port_lower_dtr_rts); * management of these lines. Note that the dtr/rts raise is done each * iteration as a hangup may have previously dropped them while we wait. */ - + int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp) { @@ -254,7 +254,8 @@ int tty_port_block_til_ready(struct tty_port *port, tty_port_raise_dtr_rts(port); prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); - /* Check for a hangup or uninitialised port. Return accordingly */ + /* Check for a hangup or uninitialised port. + Return accordingly */ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; @@ -286,11 +287,11 @@ int tty_port_block_til_ready(struct tty_port *port, port->flags |= ASYNC_NORMAL_ACTIVE; spin_unlock_irqrestore(&port->lock, flags); return retval; - } EXPORT_SYMBOL(tty_port_block_til_ready); -int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp) +int tty_port_close_start(struct tty_port *port, + struct tty_struct *tty, struct file *filp) { unsigned long flags; @@ -300,7 +301,7 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f return 0; } - if( tty->count == 1 && port->count != 1) { + if (tty->count == 1 && port->count != 1) { printk(KERN_WARNING "tty_port_close_start: tty->count = 1 port count = %d.\n", port->count); @@ -332,8 +333,8 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f long timeout; if (bps > 1200) - timeout = max_t(long, (HZ * 10 * port->drain_delay) / bps, - HZ / 10); + timeout = max_t(long, + (HZ * 10 * port->drain_delay) / bps, HZ / 10); else timeout = 2 * HZ; schedule_timeout_interruptible(timeout); @@ -384,7 +385,7 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty, EXPORT_SYMBOL(tty_port_close); int tty_port_open(struct tty_port *port, struct tty_struct *tty, - struct file *filp) + struct file *filp) { spin_lock_irq(&port->lock); if (!tty_hung_up_p(filp)) @@ -404,10 +405,10 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, if (port->ops->activate) { int retval = port->ops->activate(port, tty); if (retval) { - mutex_unlock(&port->mutex); - return retval; - } - } + mutex_unlock(&port->mutex); + return retval; + } + } set_bit(ASYNCB_INITIALIZED, &port->flags); } mutex_unlock(&port->mutex); -- cgit v1.2.3 From e1108a63e10d344284011cccc06328b2cd3e5da3 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Oct 2009 16:06:36 +0100 Subject: usb_serial: Use the shutdown() operation As Alan Stern pointed out - now we have tty_port_open the shutdown method and locking allow us to whack the other bits into the full helper methods and provide a shutdown op which the tty port code will synchronize with setup for us. Signed-off-by: Alan Cox Cc: Alan Stern Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 39 +++++++++++---------------------------- 1 file changed, 11 insertions(+), 28 deletions(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b0649d92251..829a46684e1 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -254,15 +254,12 @@ static int serial_activate(struct tty_port *tport, struct tty_struct *tty) struct usb_serial *serial = port->serial; int retval; - if (mutex_lock_interruptible(&port->mutex)) - return -ERESTARTSYS; mutex_lock(&serial->disc_mutex); if (serial->disconnected) retval = -ENODEV; else retval = port->serial->type->open(tty, port); mutex_unlock(&serial->disc_mutex); - mutex_unlock(&port->mutex); return retval; } @@ -276,57 +273,40 @@ static int serial_open(struct tty_struct *tty, struct file *filp) /** * serial_down - shut down hardware - * @port: port to shut down + * @tport: tty port to shut down * * Shut down a USB serial port unless it is the console. We never - * shut down the console hardware as it will always be in use. + * shut down the console hardware as it will always be in use. Serialized + * against activate by the tport mutex and kept to matching open/close pairs + * of calls by the ASYNCB_INITIALIZED flag. */ -static void serial_down(struct usb_serial_port *port) +static void serial_down(struct tty_port *tport) { + struct usb_serial_port *port = + container_of(tport, struct usb_serial_port, port); struct usb_serial_driver *drv = port->serial->type; - /* * The console is magical. Do not hang up the console hardware * or there will be tears. */ if (port->console) return; - - /* Don't call the close method if the hardware hasn't been - * initialized. - */ - if (!test_and_clear_bit(ASYNCB_INITIALIZED, &port->port.flags)) - return; - - mutex_lock(&port->mutex); if (drv->close) drv->close(port); - mutex_unlock(&port->mutex); } static void serial_hangup(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); - - serial_down(port); tty_port_hangup(&port->port); } static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); - - if (tty_hung_up_p(filp)) - return; - if (tty_port_close_start(&port->port, tty, filp) == 0) - return; - serial_down(port); - tty_port_close_end(&port->port, tty); - tty_port_tty_set(&port->port, NULL); + tty_port_close(&port->port, tty, filp); } /** @@ -716,6 +696,7 @@ static const struct tty_port_operations serial_port_ops = { .carrier_raised = serial_carrier_raised, .dtr_rts = serial_dtr_rts, .activate = serial_activate, + .shutdown = serial_down, }; int usb_serial_probe(struct usb_interface *interface, @@ -914,6 +895,8 @@ int usb_serial_probe(struct usb_interface *interface, port->port.ops = &serial_port_ops; port->serial = serial; spin_lock_init(&port->lock); + /* Keep this for private driver use for the moment but + should probably go away */ mutex_init(&port->mutex); INIT_WORK(&port->work, usb_serial_port_work); serial->port[i] = port; -- cgit v1.2.3 From 82fc5943430e3cbf15033ed4186a73f90906345d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Oct 2009 16:06:46 +0100 Subject: usb_serial: Kill port mutex The tty port has a port mutex used for all the port related locking so we don't need the one in the USB serial layer any more. Signed-off-by: Alan Cox Cc: Alan Stern Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/opticon.c | 4 ++-- drivers/usb/serial/usb-serial.c | 1 - include/linux/usb/serial.h | 3 --- 3 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 80f59b6350c..c03fdc0242d 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -501,12 +501,12 @@ static int opticon_resume(struct usb_interface *intf) struct usb_serial_port *port = serial->port[0]; int result; - mutex_lock(&port->mutex); + mutex_lock(&port->port.mutex); if (port->port.count) result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO); else result = 0; - mutex_unlock(&port->mutex); + mutex_unlock(&port->port.mutex); return result; } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 829a46684e1..4543f359be7 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -897,7 +897,6 @@ int usb_serial_probe(struct usb_interface *interface, spin_lock_init(&port->lock); /* Keep this for private driver use for the moment but should probably go away */ - mutex_init(&port->mutex); INIT_WORK(&port->work, usb_serial_port_work); serial->port[i] = port; port->dev.parent = &interface->dev; diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index ce911ebf91e..acf6e457c04 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -39,8 +39,6 @@ enum port_dev_state { * @serial: pointer back to the struct usb_serial owner of this port. * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. - * @mutex: mutex used to synchronize serial_open() and serial_close() - * access for this port. * @number: the number of the port (the minor number). * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. @@ -77,7 +75,6 @@ struct usb_serial_port { struct usb_serial *serial; struct tty_port port; spinlock_t lock; - struct mutex mutex; unsigned char number; unsigned char *interrupt_in_buffer; -- cgit v1.2.3 From 2a0785ea375fe93cd480599bb40d0c837ff72a2e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Oct 2009 16:06:57 +0100 Subject: opticon: Fix resume logic Opticon now takes the right mutex to check the port status but the status check is done wrongly for the modern serial code, so fix it. Signed-off-by: Alan Cox Cc: Alan Stern Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/opticon.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index c03fdc0242d..4cdb975caa8 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -502,7 +502,8 @@ static int opticon_resume(struct usb_interface *intf) int result; mutex_lock(&port->port.mutex); - if (port->port.count) + /* This is protected by the port mutex against close/open */ + if (test_bit(ASYNCB_INITIALIZED, &port->port.flags)) result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO); else result = 0; -- cgit v1.2.3 From 9e845abfc8a8973373821aa05302794fd254514b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Goddard=20Rosa?= Date: Sun, 25 Oct 2009 11:16:32 -0200 Subject: serial: fix NULL pointer dereference MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If kzalloc() or alloc_tty_driver() fails, we call: put_tty_driver(normal = NULL). Then: put_tty_driver -> tty_driver_kref_put -> kref_put(&NULL->kref, ...) Signed-off-by: André Goddard Rosa Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_core.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index dcc72444e8e..885eabe552c 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2344,7 +2344,7 @@ static const struct tty_operations uart_ops = { */ int uart_register_driver(struct uart_driver *drv) { - struct tty_driver *normal = NULL; + struct tty_driver *normal; int i, retval; BUG_ON(drv->state); @@ -2354,13 +2354,12 @@ int uart_register_driver(struct uart_driver *drv) * we have a large number of ports to handle. */ drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL); - retval = -ENOMEM; if (!drv->state) goto out; - normal = alloc_tty_driver(drv->nr); + normal = alloc_tty_driver(drv->nr); if (!normal) - goto out; + goto out_kfree; drv->tty_driver = normal; @@ -2393,12 +2392,14 @@ int uart_register_driver(struct uart_driver *drv) } retval = tty_register_driver(normal); - out: - if (retval < 0) { - put_tty_driver(normal); - kfree(drv->state); - } - return retval; + if (retval >= 0) + return retval; + + put_tty_driver(normal); +out_kfree: + kfree(drv->state); +out: + return -ENOMEM; } /** -- cgit v1.2.3 From 82cb7ba10deafe17686bf22ce4a7a303a77a197f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Goddard=20Rosa?= Date: Sun, 25 Oct 2009 11:18:26 -0200 Subject: serial: cascade needless conditionals MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: André Goddard Rosa Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_core.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 885eabe552c..047530b285b 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -342,11 +342,11 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, if (flags == UPF_SPD_HI) altbaud = 57600; - if (flags == UPF_SPD_VHI) + else if (flags == UPF_SPD_VHI) altbaud = 115200; - if (flags == UPF_SPD_SHI) + else if (flags == UPF_SPD_SHI) altbaud = 230400; - if (flags == UPF_SPD_WARP) + else if (flags == UPF_SPD_WARP) altbaud = 460800; for (try = 0; try < 2; try++) { @@ -1217,9 +1217,8 @@ static void uart_set_termios(struct tty_struct *tty, /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR); - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { unsigned int mask = TIOCM_DTR; if (!(cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) @@ -1234,9 +1233,8 @@ static void uart_set_termios(struct tty_struct *tty, __uart_start(tty); spin_unlock_irqrestore(&state->uart_port->lock, flags); } - /* Handle turning on CRTSCTS */ - if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { + else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { spin_lock_irqsave(&state->uart_port->lock, flags); if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) { tty->hw_stopped = 1; -- cgit v1.2.3 From 4c0ebb8057bc335d345c8e205a3e6fd1320be21e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Goddard=20Rosa?= Date: Sun, 25 Oct 2009 12:01:34 -0200 Subject: serial, 8250: calculate irqflags bitmask before loop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: André Goddard Rosa Signed-off-by: Greg Kroah-Hartman --- drivers/serial/8250.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 737b4c96097..b75e63e9d1e 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2646,7 +2646,7 @@ static void __init serial8250_isa_init_ports(void) { struct uart_8250_port *up; static int first = 1; - int i; + int i, irqflag = 0; if (!first) return; @@ -2670,6 +2670,9 @@ static void __init serial8250_isa_init_ports(void) up->port.ops = &serial8250_pops; } + if (share_irqs) + irqflag = IRQF_SHARED; + for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; i++, up++) { @@ -2683,8 +2686,7 @@ static void __init serial8250_isa_init_ports(void) up->port.iotype = old_serial_port[i].io_type; up->port.regshift = old_serial_port[i].iomem_reg_shift; set_io_from_upio(&up->port); - if (share_irqs) - up->port.irqflags |= IRQF_SHARED; + up->port.irqflags |= irqflag; } } @@ -2940,10 +2942,13 @@ static int __devinit serial8250_probe(struct platform_device *dev) { struct plat_serial8250_port *p = dev->dev.platform_data; struct uart_port port; - int ret, i; + int ret, i, irqflag = 0; memset(&port, 0, sizeof(struct uart_port)); + if (share_irqs) + irqflag = IRQF_SHARED; + for (i = 0; p && p->flags != 0; p++, i++) { port.iobase = p->iobase; port.membase = p->membase; @@ -2960,8 +2965,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) port.serial_in = p->serial_in; port.serial_out = p->serial_out; port.dev = &dev->dev; - if (share_irqs) - port.irqflags |= IRQF_SHARED; + port.irqflags |= irqflag; ret = serial8250_register_port(&port); if (ret < 0) { dev_err(&dev->dev, "unable to register port at index %d " -- cgit v1.2.3 From c934878cc09fdd4a06ffa554c5149b11d972456f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 6 Nov 2009 21:40:46 +0100 Subject: Serial: pxa: work around Errata #75 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Intel(R) PXA27x Processor Family Specification Update (Nov 2005) says: E75. UART: Baud rate may not be programmed correctly on back-to-back writes. Problem: When programming the Divisor Latch registers, Low and High (DLL and DLH), with back-to-back writes, the second register write may not take effect. The result is an incorrect baud rate. Workaround: After programming the first Divisor Latch register, read and verify it before programming the second Divisor Latch register. This was hit when changing the baud rate from 115200 to 9600 while receiving characters at 9600 Bd. And fixed indention of some comments nearby. Signed-off-by: Uwe Kleine-König Acked-by: Wolfram Sang Acked-by: Marc Kleine-Budde Cc: Eric Miao Cc: Alan Cox Cc: Mike Rapoport Signed-off-by: Greg Kroah-Hartman --- drivers/serial/pxa.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index b8629d74f6a..4a821046baa 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -438,6 +438,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; + unsigned int dll; switch (termios->c_cflag & CSIZE) { case CS5: @@ -534,10 +535,18 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, else up->mcr &= ~UART_MCR_AFE; - serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + + /* + * work around Errata #75 according to Intel(R) PXA27x Processor Family + * Specification Update (Nov 2005) + */ + dll = serial_in(up, UART_DLL); + WARN_ON(dll != (quot & 0xff)); + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ - serial_out(up, UART_LCR, cval); /* reset DLAB */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ up->lcr = cval; /* Save LCR */ serial_pxa_set_mctrl(&up->port, up->port.mctrl); serial_out(up, UART_FCR, fcr); -- cgit v1.2.3 From 7e11a0fb3b7ab83871b7a56c7a67c603283ec4b9 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Wed, 4 Nov 2009 16:04:52 -0800 Subject: tty: docs: serial/tty, add to ldisc methods A small addition to the ldisc method descriptions. Signed-off-by: Tilman Schmidt Signed-off-by: Randy Dunlap Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- Documentation/serial/tty.txt | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt index 8e65c4498c5..5e5349a4fcd 100644 --- a/Documentation/serial/tty.txt +++ b/Documentation/serial/tty.txt @@ -42,7 +42,8 @@ TTY side interfaces: open() - Called when the line discipline is attached to the terminal. No other call into the line discipline for this tty will occur until it - completes successfully. Can sleep. + completes successfully. Returning an error will + prevent the ldisc from being attached. Can sleep. close() - This is called on a terminal when the line discipline is being unplugged. At the point of @@ -52,7 +53,7 @@ close() - This is called on a terminal when the line hangup() - Called when the tty line is hung up. The line discipline should cease I/O to the tty. No further calls into the ldisc code will occur. - Can sleep. + The return value is ignored. Can sleep. write() - A process is writing data through the line discipline. Multiple write calls are serialized @@ -83,6 +84,10 @@ ioctl() - Called when an ioctl is handed to the tty layer that might be for the ldisc. Multiple ioctl calls may occur in parallel. May sleep. +compat_ioctl() - Called when a 32 bit ioctl is handed to the tty layer + that might be for the ldisc. Multiple ioctl calls + may occur in parallel. May sleep. + Driver Side Interfaces: receive_buf() - Hand buffers of bytes from the driver to the ldisc -- cgit v1.2.3 From 68cb4f8e246bbbc649980be0628cae9265870a91 Mon Sep 17 00:00:00 2001 From: Ian Jackson Date: Wed, 18 Nov 2009 11:08:11 +0100 Subject: Serial: Do not read IIR in serial8250_start_tx when UART_BUG_TXEN Do not read IIR in serial8250_start_tx when UART_BUG_TXEN Reading the IIR clears some oustanding interrupts so it is not safe. Instead, simply transmit immediately if the buffer is empty without regard to IIR. Signed-off-by: Ian Jackson Reviewed-by: Markus Armbruster Reviewed-by: Jiri Kosina Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/serial/8250.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b75e63e9d1e..c3e37c8e7e2 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1339,14 +1339,12 @@ static void serial8250_start_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); if (up->bugs & UART_BUG_TXEN) { - unsigned char lsr, iir; + unsigned char lsr; lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - iir = serial_in(up, UART_IIR) & 0x0f; if ((up->port.type == PORT_RM9000) ? - (lsr & UART_LSR_THRE && - (iir == UART_IIR_NO_INT || iir == UART_IIR_THRI)) : - (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)) + (lsr & UART_LSR_THRE) : + (lsr & UART_LSR_TEMT)) transmit_chars(up); } } -- cgit v1.2.3 From edfacdd6f81119b9005615593f2cbd94b8c7e2d8 Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Tue, 17 Nov 2009 18:35:43 -0800 Subject: devpts_get_tty() should validate inode devpts_get_tty() assumes that the inode passed in is associated with a valid pty. But if the only reference to the pty is via a bind-mount, the inode passed to devpts_get_tty() while valid, would refer to a pty that no longer exists. With a lot of debug effort, Grzegorz Nosek developed a small program (see below) to reproduce a crash on recent kernels. This crash is a regression introduced by the commit: commit 527b3e4773628b30d03323a2cb5fb0d84441990f Author: Sukadev Bhattiprolu Date: Mon Oct 13 10:43:08 2008 +0100 To fix, ensure that the dentry associated with the inode has not yet been deleted/unhashed by devpts_pty_kill(). See also: https://lists.linux-foundation.org/pipermail/containers/2009-July/019273.html tty-bug.c: #define _GNU_SOURCE #include #include #include #include #include #include #include #include void dummy(int sig) { } static int child(void *unused) { int fd; signal(SIGINT, dummy); signal(SIGHUP, dummy); pause(); /* cheesy synchronisation to wait for /dev/pts/0 to appear */ mount("/dev/pts/0", "/dev/console", NULL, MS_BIND, NULL); sleep(2); fd = open("/dev/console", O_RDWR); dup(0); dup(0); write(1, "Hello world!\n", sizeof("Hello world!\n")-1); return 0; } int main(void) { pid_t pid; char *stack; stack = malloc(16384); pid = clone(child, stack+16384, CLONE_NEWNS|SIGCHLD, NULL); open("/dev/ptmx", O_RDWR|O_NOCTTY|O_NONBLOCK); unlockpt(fd); grantpt(fd); sleep(2); kill(pid, SIGHUP); sleep(1); return 0; /* exit before child opens /dev/console */ } Reported-by: Grzegorz Nosek Signed-off-by: Sukadev Bhattiprolu Tested-by: Serge Hallyn Cc: stable Signed-off-by: Greg Kroah-Hartman --- fs/devpts/inode.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index d5f8c96964b..8882ecc0f1b 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -517,11 +517,23 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty) struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number) { + struct dentry *dentry; + struct tty_struct *tty; + BUG_ON(pts_inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR)); + /* Ensure dentry has not been deleted by devpts_pty_kill() */ + dentry = d_find_alias(pts_inode); + if (!dentry) + return NULL; + + tty = NULL; if (pts_inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC) - return (struct tty_struct *)pts_inode->i_private; - return NULL; + tty = (struct tty_struct *)pts_inode->i_private; + + dput(dentry); + + return tty; } void devpts_pty_kill(struct tty_struct *tty) -- cgit v1.2.3 From e707c35cbbe83a016cf0122a29e3a47b5a9e35c4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 5 Nov 2009 13:27:57 +0000 Subject: tty_port: Move hupcl handling Move the HUCPL handling from the end of close_port_start to the beginning of close_port_end. What this actually does is change the ordering from port shutdown port->dtr_rts to port->dtr_rts port shutdown Some hardware drops the physical connection on shutdown so we must perform the port operations before the shutdown. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 41b314cfda4..dd471d63fae 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -339,6 +339,14 @@ int tty_port_close_start(struct tty_port *port, timeout = 2 * HZ; schedule_timeout_interruptible(timeout); } + /* Flush the ldisc buffering */ + tty_ldisc_flush(tty); + + /* Drop DTR/RTS if HUPCL is set. This causes any attached modem to + hang up the line */ + if (tty->termios->c_cflag & HUPCL) + tty_port_lower_dtr_rts(port); + /* Don't call port->drop for the last reference. Callers will want to drop the last active reference in ->shutdown() or the tty shutdown path */ @@ -350,11 +358,6 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) { unsigned long flags; - tty_ldisc_flush(tty); - - if (tty->termios->c_cflag & HUPCL) - tty_port_lower_dtr_rts(port); - spin_lock_irqsave(&port->lock, flags); tty->closing = 0; -- cgit v1.2.3 From b5849b1a82853171ce8a35220204f17ec282a9a8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 5 Nov 2009 13:28:06 +0000 Subject: sdio_uart: use tty_port Add a tty_port object to the sdio uart. For the moment just begin using the tty field of the port, as this is the critical one to clean up. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/card/sdio_uart.c | 41 +++++++++++++++++++++++------------------ 1 file changed, 23 insertions(+), 18 deletions(-) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index b8e7c5ae981..c2759dbfdfd 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -73,6 +73,7 @@ struct uart_icount { }; struct sdio_uart_port { + struct tty_port port; struct kref kref; struct tty_struct *tty; unsigned int index; @@ -172,7 +173,7 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port) port->func = NULL; mutex_unlock(&port->func_lock); if (port->opened) - tty_hangup(port->tty); + tty_hangup(port->port.tty); mutex_unlock(&port->open_lock); sdio_release_irq(func); sdio_disable_func(func); @@ -391,7 +392,7 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port) static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status) { - struct tty_struct *tty = port->tty; + struct tty_struct *tty = port->port.tty; unsigned int ch, flag; int max_count = 256; @@ -446,6 +447,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) { struct circ_buf *xmit = &port->xmit; int count; + struct tty_struct *tty = port->port.tty; if (port->x_char) { sdio_out(port, UART_TX, port->x_char); @@ -453,7 +455,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) port->x_char = 0; return; } - if (circ_empty(xmit) || port->tty->stopped || port->tty->hw_stopped) { + if (circ_empty(xmit) || tty->stopped || tty->hw_stopped) { sdio_uart_stop_tx(port); return; } @@ -468,7 +470,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) } while (--count > 0); if (circ_chars_pending(xmit) < WAKEUP_CHARS) - tty_wakeup(port->tty); + tty_wakeup(tty); if (circ_empty(xmit)) sdio_uart_stop_tx(port); @@ -477,6 +479,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) static void sdio_uart_check_modem_status(struct sdio_uart_port *port) { int status; + struct tty_struct *tty = port->port.tty; status = sdio_in(port, UART_MSR); @@ -491,17 +494,17 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) port->icount.dcd++; if (status & UART_MSR_DCTS) { port->icount.cts++; - if (port->tty->termios->c_cflag & CRTSCTS) { + if (tty->termios->c_cflag & CRTSCTS) { int cts = (status & UART_MSR_CTS); - if (port->tty->hw_stopped) { + if (tty->hw_stopped) { if (cts) { - port->tty->hw_stopped = 0; + tty->hw_stopped = 0; sdio_uart_start_tx(port); - tty_wakeup(port->tty); + tty_wakeup(tty); } } else { if (!cts) { - port->tty->hw_stopped = 1; + tty->hw_stopped = 1; sdio_uart_stop_tx(port); } } @@ -546,12 +549,13 @@ static int sdio_uart_startup(struct sdio_uart_port *port) { unsigned long page; int ret; + struct tty_struct *tty = port->port.tty; /* * Set the TTY IO error marker - we will only clear this * once we have successfully opened the port. */ - set_bit(TTY_IO_ERROR, &port->tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); /* Initialise and allocate the transmit buffer. */ page = __get_free_page(GFP_KERNEL); @@ -595,14 +599,14 @@ static int sdio_uart_startup(struct sdio_uart_port *port) port->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; port->mctrl = TIOCM_OUT2; - sdio_uart_change_speed(port, port->tty->termios, NULL); + sdio_uart_change_speed(port, tty->termios, NULL); - if (port->tty->termios->c_cflag & CBAUD) + if (tty->termios->c_cflag & CBAUD) sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); - if (port->tty->termios->c_cflag & CRTSCTS) + if (tty->termios->c_cflag & CRTSCTS) if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) - port->tty->hw_stopped = 1; + tty->hw_stopped = 1; clear_bit(TTY_IO_ERROR, &port->tty->flags); @@ -634,7 +638,7 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port) /* TODO: wait here for TX FIFO to drain */ /* Turn off DTR and RTS early. */ - if (port->tty->termios->c_cflag & HUPCL) + if (port->port.tty->termios->c_cflag & HUPCL) sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); /* Disable interrupts from this port */ @@ -684,11 +688,11 @@ static int sdio_uart_open(struct tty_struct *tty, struct file *filp) if (!port->opened) { tty->driver_data = port; - port->tty = tty; + port->port.tty = tty; ret = sdio_uart_startup(port); if (ret) { tty->driver_data = NULL; - port->tty = NULL; + port->port.tty = NULL; mutex_unlock(&port->open_lock); sdio_uart_port_put(port); return ret; @@ -723,7 +727,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp) tty->closing = 1; sdio_uart_shutdown(port); tty_ldisc_flush(tty); - port->tty = NULL; + port->port.tty = NULL; tty->driver_data = NULL; tty->closing = 0; } @@ -1068,6 +1072,7 @@ static int sdio_uart_probe(struct sdio_func *func, port->func = func; sdio_set_drvdata(func, port); + tty_port_init(&port->port); ret = sdio_uart_add_port(port); if (ret) { -- cgit v1.2.3 From 0395b48c78ed822f251ab15d0fbc3ce06f41ffb1 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 5 Nov 2009 13:28:17 +0000 Subject: sdio_uart: Fix oops caused by the previous changeset Now... testing reveals that the very first patch "sdio_uart: use tty_port" causes a segmentation fault in sdio_uart_open(): Unable to handle kernel NULL pointer dereference at virtual address 00000084 pgd = dfb44000 [00000084] *pgd=1fb99031, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT last sysfs file: /sys/devices/platform/mvsdio/mmc_host/mmc0/mmc0:f111/uevent Modules linked in: CPU: 0 Not tainted (2.6.32-rc5-next-20091102-00001-gb36eae9 #10) PC is at sdio_uart_open+0x204/0x2cc [...] Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/card/sdio_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index c2759dbfdfd..671fe5efabf 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -608,7 +608,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port) if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) tty->hw_stopped = 1; - clear_bit(TTY_IO_ERROR, &port->tty->flags); + clear_bit(TTY_IO_ERROR, &tty->flags); /* Kick the IRQ handler once while we're still holding the host lock */ sdio_uart_irq(port->func); -- cgit v1.2.3 From 530646f4695b396aeeec2ca912dcc3a9c95e0f52 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 5 Nov 2009 13:28:29 +0000 Subject: sdio_uart: refcount the tty objects MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The tty can go away underneath us, so we must refcount it. Do the naïve implementation initially. We will worry about startup shortly. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/card/sdio_uart.c | 59 +++++++++++++++++++++++++++++++------------- 1 file changed, 42 insertions(+), 17 deletions(-) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 671fe5efabf..86ad5434112 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -172,8 +172,13 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port) sdio_claim_host(func); port->func = NULL; mutex_unlock(&port->func_lock); - if (port->opened) - tty_hangup(port->port.tty); + if (port->opened) { + struct tty_struct *tty = tty_port_tty_get(&port->port); + /* tty_hangup is async so is this safe as is ?? */ + if (tty) + tty_hangup(tty); + tty_kref_put(tty); + } mutex_unlock(&port->open_lock); sdio_release_irq(func); sdio_disable_func(func); @@ -392,7 +397,7 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port) static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status) { - struct tty_struct *tty = port->port.tty; + struct tty_struct *tty = tty_port_tty_get(&port->port); unsigned int ch, flag; int max_count = 256; @@ -429,25 +434,30 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, } if ((*status & port->ignore_status_mask & ~UART_LSR_OE) == 0) - tty_insert_flip_char(tty, ch, flag); + if (tty) + tty_insert_flip_char(tty, ch, flag); /* * Overrun is special. Since it's reported immediately, * it doesn't affect the current character. */ if (*status & ~port->ignore_status_mask & UART_LSR_OE) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + if (tty) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); *status = sdio_in(port, UART_LSR); } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - tty_flip_buffer_push(tty); + if (tty) { + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } } static void sdio_uart_transmit_chars(struct sdio_uart_port *port) { struct circ_buf *xmit = &port->xmit; int count; - struct tty_struct *tty = port->port.tty; + struct tty_struct *tty; if (port->x_char) { sdio_out(port, UART_TX, port->x_char); @@ -455,8 +465,12 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) port->x_char = 0; return; } - if (circ_empty(xmit) || tty->stopped || tty->hw_stopped) { + + tty = tty_port_tty_get(&port->port); + + if (tty == NULL || circ_empty(xmit) || tty->stopped || tty->hw_stopped) { sdio_uart_stop_tx(port); + tty_kref_put(tty); return; } @@ -474,12 +488,13 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) if (circ_empty(xmit)) sdio_uart_stop_tx(port); + tty_kref_put(tty); } static void sdio_uart_check_modem_status(struct sdio_uart_port *port) { int status; - struct tty_struct *tty = port->port.tty; + struct tty_struct *tty; status = sdio_in(port, UART_MSR); @@ -494,7 +509,8 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) port->icount.dcd++; if (status & UART_MSR_DCTS) { port->icount.cts++; - if (tty->termios->c_cflag & CRTSCTS) { + tty = tty_port_tty_get(&port->port); + if (tty && (tty->termios->c_cflag & CRTSCTS)) { int cts = (status & UART_MSR_CTS); if (tty->hw_stopped) { if (cts) { @@ -509,6 +525,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) } } } + tty_kref_put(tty); } } @@ -548,8 +565,10 @@ static void sdio_uart_irq(struct sdio_func *func) static int sdio_uart_startup(struct sdio_uart_port *port) { unsigned long page; - int ret; - struct tty_struct *tty = port->port.tty; + int ret = -ENOMEM; + struct tty_struct *tty = tty_port_tty_get(&port->port); + + /* FIXME: What if it is NULL ?? */ /* * Set the TTY IO error marker - we will only clear this @@ -560,7 +579,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port) /* Initialise and allocate the transmit buffer. */ page = __get_free_page(GFP_KERNEL); if (!page) - return -ENOMEM; + goto err0; port->xmit.buf = (unsigned char *)page; circ_clear(&port->xmit); @@ -614,6 +633,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port) sdio_uart_irq(port->func); sdio_uart_release_func(port); + tty_kref_put(tty); return 0; err3: @@ -622,12 +642,15 @@ err2: sdio_uart_release_func(port); err1: free_page((unsigned long)port->xmit.buf); +err0: + tty_kref_put(tty); return ret; } static void sdio_uart_shutdown(struct sdio_uart_port *port) { int ret; + struct tty_struct *tty; ret = sdio_uart_claim_func(port); if (ret) @@ -637,9 +660,11 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port) /* TODO: wait here for TX FIFO to drain */ + tty = tty_port_tty_get(&port->port); /* Turn off DTR and RTS early. */ - if (port->port.tty->termios->c_cflag & HUPCL) + if (tty && (tty->termios->c_cflag & HUPCL)) sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + tty_kref_put(tty); /* Disable interrupts from this port */ sdio_release_irq(port->func); @@ -688,11 +713,11 @@ static int sdio_uart_open(struct tty_struct *tty, struct file *filp) if (!port->opened) { tty->driver_data = port; - port->port.tty = tty; + tty_port_tty_set(&port->port, tty); ret = sdio_uart_startup(port); if (ret) { tty->driver_data = NULL; - port->port.tty = NULL; + tty_port_tty_set(&port->port, NULL); mutex_unlock(&port->open_lock); sdio_uart_port_put(port); return ret; @@ -727,7 +752,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp) tty->closing = 1; sdio_uart_shutdown(port); tty_ldisc_flush(tty); - port->port.tty = NULL; + tty_port_tty_set(&port->port, NULL); tty->driver_data = NULL; tty->closing = 0; } -- cgit v1.2.3 From 0a68f64febf365313987c570ad59c9069f61306d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 5 Nov 2009 13:28:38 +0000 Subject: sdio_uart: Move the open lock When we move to the tty_port logic the port mutex will protect open v close v hangup. Move to this first in the existing open code so we have a bisection point. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/card/sdio_uart.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 86ad5434112..31f70233133 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -78,7 +78,6 @@ struct sdio_uart_port { struct tty_struct *tty; unsigned int index; unsigned int opened; - struct mutex open_lock; struct sdio_func *func; struct mutex func_lock; struct task_struct *in_sdio_uart_irq; @@ -103,7 +102,6 @@ static int sdio_uart_add_port(struct sdio_uart_port *port) int index, ret = -EBUSY; kref_init(&port->kref); - mutex_init(&port->open_lock); mutex_init(&port->func_lock); spin_lock_init(&port->write_lock); @@ -166,7 +164,7 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port) * give up on that port ASAP. * Beware: the lock ordering is critical. */ - mutex_lock(&port->open_lock); + mutex_lock(&port->port.mutex); mutex_lock(&port->func_lock); func = port->func; sdio_claim_host(func); @@ -179,7 +177,7 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port) tty_hangup(tty); tty_kref_put(tty); } - mutex_unlock(&port->open_lock); + mutex_unlock(&port->port.mutex); sdio_release_irq(func); sdio_disable_func(func); sdio_release_host(func); @@ -699,14 +697,14 @@ static int sdio_uart_open(struct tty_struct *tty, struct file *filp) if (!port) return -ENODEV; - mutex_lock(&port->open_lock); + mutex_lock(&port->port.mutex); /* * Make sure not to mess up with a dead port * which has not been closed yet. */ if (tty->driver_data && tty->driver_data != port) { - mutex_unlock(&port->open_lock); + mutex_unlock(&port->port.mutex); sdio_uart_port_put(port); return -EBUSY; } @@ -718,13 +716,13 @@ static int sdio_uart_open(struct tty_struct *tty, struct file *filp) if (ret) { tty->driver_data = NULL; tty_port_tty_set(&port->port, NULL); - mutex_unlock(&port->open_lock); + mutex_unlock(&port->port.mutex); sdio_uart_port_put(port); return ret; } } port->opened++; - mutex_unlock(&port->open_lock); + mutex_unlock(&port->port.mutex); return 0; } @@ -735,7 +733,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp) if (!port) return; - mutex_lock(&port->open_lock); + mutex_lock(&port->port.mutex); BUG_ON(!port->opened); /* @@ -744,7 +742,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp) * is larger than port->count. */ if (tty->count > port->opened) { - mutex_unlock(&port->open_lock); + mutex_unlock(&port->port.mutex); return; } @@ -756,7 +754,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp) tty->driver_data = NULL; tty->closing = 0; } - mutex_unlock(&port->open_lock); + mutex_unlock(&port->port.mutex); sdio_uart_port_put(port); } -- cgit v1.2.3 From 584abc3775e76c1a2abe725355915851ed23ed6c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:16:09 +0000 Subject: tty: sdio_uart: Switch to the open/close helpers Gets us proper tty semantics, removes some code and fixes up a few corner case races (hangup during open etc) Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/card/sdio_uart.c | 201 +++++++++++++++++++++++++------------------ 1 file changed, 119 insertions(+), 82 deletions(-) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 31f70233133..95027b03c64 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -77,7 +77,6 @@ struct sdio_uart_port { struct kref kref; struct tty_struct *tty; unsigned int index; - unsigned int opened; struct sdio_func *func; struct mutex func_lock; struct task_struct *in_sdio_uart_irq; @@ -150,6 +149,7 @@ static void sdio_uart_port_put(struct sdio_uart_port *port) static void sdio_uart_port_remove(struct sdio_uart_port *port) { struct sdio_func *func; + struct tty_struct *tty; BUG_ON(sdio_uart_table[port->index] != port); @@ -170,11 +170,10 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port) sdio_claim_host(func); port->func = NULL; mutex_unlock(&port->func_lock); - if (port->opened) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - /* tty_hangup is async so is this safe as is ?? */ - if (tty) - tty_hangup(tty); + tty = tty_port_tty_get(&port->port); + /* tty_hangup is async so is this safe as is ?? */ + if (tty) { + tty_hangup(tty); tty_kref_put(tty); } mutex_unlock(&port->port.mutex); @@ -560,13 +559,46 @@ static void sdio_uart_irq(struct sdio_func *func) port->in_sdio_uart_irq = NULL; } -static int sdio_uart_startup(struct sdio_uart_port *port) +/** + * uart_dtr_rts - port helper to set uart signals + * @tport: tty port to be updated + * @onoff: set to turn on DTR/RTS + * + * Called by the tty port helpers when the modem signals need to be + * adjusted during an open, close and hangup. + */ + +static void uart_dtr_rts(struct tty_port *tport, int onoff) { - unsigned long page; - int ret = -ENOMEM; - struct tty_struct *tty = tty_port_tty_get(&port->port); + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); + if (onoff == 0) + sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + else + sdio_uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); +} - /* FIXME: What if it is NULL ?? */ +/** + * sdio_uart_activate - start up hardware + * @tport: tty port to activate + * @tty: tty bound to this port + * + * Activate a tty port. The port locking guarantees us this will be + * run exactly once per set of opens, and if successful will see the + * shutdown method run exactly once to match. Start up and shutdown are + * protected from each other by the internal locking and will not run + * at the same time even during a hangup event. + * + * If we successfully start up the port we take an extra kref as we + * will keep it around until shutdown when the kref is dropped. + */ + +static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) +{ + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); + unsigned long page; + int ret; /* * Set the TTY IO error marker - we will only clear this @@ -577,7 +609,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port) /* Initialise and allocate the transmit buffer. */ page = __get_free_page(GFP_KERNEL); if (!page) - goto err0; + return -ENOMEM; port->xmit.buf = (unsigned char *)page; circ_clear(&port->xmit); @@ -631,7 +663,6 @@ static int sdio_uart_startup(struct sdio_uart_port *port) sdio_uart_irq(port->func); sdio_uart_release_func(port); - tty_kref_put(tty); return 0; err3: @@ -640,15 +671,25 @@ err2: sdio_uart_release_func(port); err1: free_page((unsigned long)port->xmit.buf); -err0: - tty_kref_put(tty); return ret; } -static void sdio_uart_shutdown(struct sdio_uart_port *port) + +/** + * sdio_uart_shutdown - stop hardware + * @tport: tty port to shut down + * + * Deactivate a tty port. The port locking guarantees us this will be + * run only if a successful matching activate already ran. The two are + * protected from each other by the internal locking and will not run + * at the same time even during a hangup event. + */ + +static void sdio_uart_shutdown(struct tty_port *tport) { + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); int ret; - struct tty_struct *tty; ret = sdio_uart_claim_func(port); if (ret) @@ -656,14 +697,6 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port) sdio_uart_stop_rx(port); - /* TODO: wait here for TX FIFO to drain */ - - tty = tty_port_tty_get(&port->port); - /* Turn off DTR and RTS early. */ - if (tty && (tty->termios->c_cflag & HUPCL)) - sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); - tty_kref_put(tty); - /* Disable interrupts from this port */ sdio_release_irq(port->func); port->ier = 0; @@ -688,74 +721,68 @@ skip: free_page((unsigned long)port->xmit.buf); } -static int sdio_uart_open(struct tty_struct *tty, struct file *filp) -{ - struct sdio_uart_port *port; - int ret; - - port = sdio_uart_port_get(tty->index); - if (!port) - return -ENODEV; - - mutex_lock(&port->port.mutex); +/** + * sdio_uart_install - install method + * @driver: the driver in use (sdio_uart in our case) + * @tty: the tty being bound + * + * Look up and bind the tty and the driver together. Initialize + * any needed private data (in our case the termios) + */ - /* - * Make sure not to mess up with a dead port - * which has not been closed yet. - */ - if (tty->driver_data && tty->driver_data != port) { - mutex_unlock(&port->port.mutex); +static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty) +{ + int idx = tty->index; + struct sdio_uart_port *port = sdio_uart_port_get(idx); + int ret = tty_init_termios(tty); + + if (ret == 0) { + tty_driver_kref_get(driver); + tty->count++; + /* This is the ref sdio_uart_port get provided */ + tty->driver_data = port; + driver->ttys[idx] = tty; + } else sdio_uart_port_put(port); - return -EBUSY; - } + return ret; - if (!port->opened) { - tty->driver_data = port; - tty_port_tty_set(&port->port, tty); - ret = sdio_uart_startup(port); - if (ret) { - tty->driver_data = NULL; - tty_port_tty_set(&port->port, NULL); - mutex_unlock(&port->port.mutex); - sdio_uart_port_put(port); - return ret; - } - } - port->opened++; - mutex_unlock(&port->port.mutex); - return 0; } -static void sdio_uart_close(struct tty_struct *tty, struct file * filp) +/** + * sdio_uart_cleanup - called on the last tty kref drop + * @tty: the tty being destroyed + * + * Called asynchronously when the last reference to the tty is dropped. + * We cannot destroy the tty->driver_data port kref until this point + */ + +static void sdio_uart_cleanup(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; + tty->driver_data = NULL; /* Bug trap */ + sdio_uart_port_put(port); +} - if (!port) - return; +/* + * Open/close/hangup is now entirely boilerplate + */ - mutex_lock(&port->port.mutex); - BUG_ON(!port->opened); +static int sdio_uart_open(struct tty_struct *tty, struct file *filp) +{ + struct sdio_uart_port *port = tty->driver_data; + return tty_port_open(&port->port, tty, filp); +} - /* - * This is messy. The tty layer calls us even when open() - * returned an error. Ignore this close request if tty->count - * is larger than port->count. - */ - if (tty->count > port->opened) { - mutex_unlock(&port->port.mutex); - return; - } +static void sdio_uart_close(struct tty_struct *tty, struct file * filp) +{ + struct sdio_uart_port *port = tty->driver_data; + tty_port_close(&port->port, tty, filp); +} - if (--port->opened == 0) { - tty->closing = 1; - sdio_uart_shutdown(port); - tty_ldisc_flush(tty); - tty_port_tty_set(&port->port, NULL); - tty->driver_data = NULL; - tty->closing = 0; - } - mutex_unlock(&port->port.mutex); - sdio_uart_port_put(port); +static void sdio_uart_hangup(struct tty_struct *tty) +{ + struct sdio_uart_port *port = tty->driver_data; + tty_port_hangup(&port->port); } static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf, @@ -1021,6 +1048,12 @@ static const struct file_operations sdio_uart_proc_fops = { .release = single_release, }; +static const struct tty_port_operations sdio_uart_port_ops = { + .dtr_rts = uart_dtr_rts, + .shutdown = sdio_uart_shutdown, + .activate = sdio_uart_activate, +}; + static const struct tty_operations sdio_uart_ops = { .open = sdio_uart_open, .close = sdio_uart_close, @@ -1031,9 +1064,12 @@ static const struct tty_operations sdio_uart_ops = { .throttle = sdio_uart_throttle, .unthrottle = sdio_uart_unthrottle, .set_termios = sdio_uart_set_termios, + .hangup = sdio_uart_hangup, .break_ctl = sdio_uart_break_ctl, .tiocmget = sdio_uart_tiocmget, .tiocmset = sdio_uart_tiocmset, + .install = sdio_uart_install, + .cleanup = sdio_uart_cleanup, .proc_fops = &sdio_uart_proc_fops, }; @@ -1096,6 +1132,7 @@ static int sdio_uart_probe(struct sdio_func *func, port->func = func; sdio_set_drvdata(func, port); tty_port_init(&port->port); + port->port.ops = &sdio_uart_port_ops; ret = sdio_uart_add_port(port); if (ret) { -- cgit v1.2.3 From 6238e712aff51ae74177cee5b2a63c0e37044e8f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:16:14 +0000 Subject: tty: sdio_uart: Fix termios handling Switching between two non standard baud rates fails because of the cflag test. Do as we did elsewhere and just kill the "optimisation". Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/card/sdio_uart.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 95027b03c64..21043974213 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -902,12 +902,6 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_t struct sdio_uart_port *port = tty->driver_data; unsigned int cflag = tty->termios->c_cflag; -#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - - if ((cflag ^ old_termios->c_cflag) == 0 && - RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) - return; - if (sdio_uart_claim_func(port) != 0) return; -- cgit v1.2.3 From c271cf37ba17631e371c97e2e8c8c353a83793e2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:16:25 +0000 Subject: tty: sdio_uart: Style fixes Running the current code through checkpatch shows a few bits of noise mostly but not entirely from before the changes. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/card/sdio_uart.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 21043974213..b999972eaf2 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -465,7 +465,8 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) tty = tty_port_tty_get(&port->port); - if (tty == NULL || circ_empty(xmit) || tty->stopped || tty->hw_stopped) { + if (tty == NULL || circ_empty(xmit) || + tty->stopped || tty->hw_stopped) { sdio_uart_stop_tx(port); tty_kref_put(tty); return; @@ -645,7 +646,7 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) */ sdio_out(port, UART_LCR, UART_LCR_WLEN8); - port->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; + port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE; port->mctrl = TIOCM_OUT2; sdio_uart_change_speed(port, tty->termios, NULL); @@ -674,7 +675,6 @@ err1: return ret; } - /** * sdio_uart_shutdown - stop hardware * @tport: tty port to shut down @@ -745,7 +745,6 @@ static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty) } else sdio_uart_port_put(port); return ret; - } /** @@ -785,7 +784,7 @@ static void sdio_uart_hangup(struct tty_struct *tty) tty_port_hangup(&port->port); } -static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf, +static int sdio_uart_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct sdio_uart_port *port = tty->driver_data; @@ -810,7 +809,7 @@ static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf, } spin_unlock(&port->write_lock); - if ( !(port->ier & UART_IER_THRI)) { + if (!(port->ier & UART_IER_THRI)) { int err = sdio_uart_claim_func(port); if (!err) { sdio_uart_start_tx(port); @@ -897,7 +896,8 @@ static void sdio_uart_unthrottle(struct tty_struct *tty) sdio_uart_release_func(port); } -static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +static void sdio_uart_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) { struct sdio_uart_port *port = tty->driver_data; unsigned int cflag = tty->termios->c_cflag; @@ -976,7 +976,7 @@ static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file, int result; result = sdio_uart_claim_func(port); - if(!result) { + if (!result) { sdio_uart_update_mctrl(port, set, clear); sdio_uart_release_func(port); } @@ -994,7 +994,7 @@ static int sdio_uart_proc_show(struct seq_file *m, void *v) struct sdio_uart_port *port = sdio_uart_port_get(i); if (port) { seq_printf(m, "%d: uart:SDIO", i); - if(capable(CAP_SYS_ADMIN)) { + if (capable(CAP_SYS_ADMIN)) { seq_printf(m, " tx:%d rx:%d", port->icount.tx, port->icount.rx); if (port->icount.frame) @@ -1100,7 +1100,7 @@ static int sdio_uart_probe(struct sdio_func *func, } if (!tpl) { printk(KERN_WARNING - "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n", + "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n", sdio_func_id(func)); kfree(port); return -EINVAL; @@ -1133,7 +1133,8 @@ static int sdio_uart_probe(struct sdio_func *func, kfree(port); } else { struct device *dev; - dev = tty_register_device(sdio_uart_tty_driver, port->index, &func->dev); + dev = tty_register_device(sdio_uart_tty_driver, + port->index, &func->dev); if (IS_ERR(dev)) { sdio_uart_port_remove(port); ret = PTR_ERR(dev); -- cgit v1.2.3 From 4b3b49bb77eddb540e7c69e2129f5334cf713bf8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:16:36 +0000 Subject: tty: sdio_uart: add modem functionality Add the POSIX block for carrier Linux TIOCMIWAIT functionality is still lacking from the driver. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/card/sdio_uart.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index b999972eaf2..2a13db54ffc 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -86,6 +87,7 @@ struct sdio_uart_port { struct uart_icount icount; unsigned int uartclk; unsigned int mctrl; + unsigned int rx_mctrl; unsigned int read_status_mask; unsigned int ignore_status_mask; unsigned char x_char; @@ -220,6 +222,8 @@ static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port) unsigned char status; unsigned int ret; + /* FIXME: What stops this losing the delta bits and breaking + sdio_uart_check_modem_status ? */ status = sdio_in(port, UART_MSR); ret = 0; @@ -503,8 +507,20 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) port->icount.rng++; if (status & UART_MSR_DDSR) port->icount.dsr++; - if (status & UART_MSR_DDCD) + if (status & UART_MSR_DDCD) { port->icount.dcd++; + /* DCD raise - wake for open */ + if (status & UART_MSR_DCD) + wake_up_interruptible(&port->port.open_wait); + else { + /* DCD drop - hang up if tty attached */ + tty = tty_port_tty_get(&port->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } + } + } if (status & UART_MSR_DCTS) { port->icount.cts++; tty = tty_port_tty_get(&port->port); @@ -560,6 +576,20 @@ static void sdio_uart_irq(struct sdio_func *func) port->in_sdio_uart_irq = NULL; } +static int uart_carrier_raised(struct tty_port *tport) +{ + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); + unsigned int ret = sdio_uart_claim_func(port); + if (ret) /* Missing hardware shoudn't block for carrier */ + return 1; + ret = sdio_uart_get_mctrl(port); + sdio_uart_release_func(port); + if (ret & TIOCM_CAR) + return 1; + return 0; +} + /** * uart_dtr_rts - port helper to set uart signals * @tport: tty port to be updated @@ -1044,6 +1074,7 @@ static const struct file_operations sdio_uart_proc_fops = { static const struct tty_port_operations sdio_uart_port_ops = { .dtr_rts = uart_dtr_rts, + .carrier_raised = uart_carrier_raised, .shutdown = sdio_uart_shutdown, .activate = sdio_uart_activate, }; -- cgit v1.2.3 From 1f100b323d19469b06a63ccd6130ed71760145cc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:16:30 +0000 Subject: tty: sdio_uart: Fix the locking on "func" for new code The new dtr_rts function didn't take the port->func lock as it should so add use of the lock there. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/card/sdio_uart.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 2a13db54ffc..f53755533e7 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -603,10 +603,14 @@ static void uart_dtr_rts(struct tty_port *tport, int onoff) { struct sdio_uart_port *port = container_of(tport, struct sdio_uart_port, port); + int ret = sdio_uart_claim_func(port); + if (ret) + return; if (onoff == 0) sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); else sdio_uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + sdio_uart_release_func(port); } /** -- cgit v1.2.3 From 44e4909e453eaa09c7de409fc9ee4ebefd986c1c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:16:41 +0000 Subject: tty: tty_port: Change the buffer allocator locking We want to be able to do this without regard for the activate/own open method being used which causes a problem using port->mutex. Add another mutex for now. Once everything uses port_open to do buffer allocs we can kill it back off Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 9 +++++---- include/linux/tty.h | 1 + 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index dd471d63fae..3ef644a2e51 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -25,6 +25,7 @@ void tty_port_init(struct tty_port *port) init_waitqueue_head(&port->close_wait); init_waitqueue_head(&port->delta_msr_wait); mutex_init(&port->mutex); + mutex_init(&port->buf_mutex); spin_lock_init(&port->lock); port->close_delay = (50 * HZ) / 100; port->closing_wait = (3000 * HZ) / 100; @@ -34,10 +35,10 @@ EXPORT_SYMBOL(tty_port_init); int tty_port_alloc_xmit_buf(struct tty_port *port) { /* We may sleep in get_zeroed_page() */ - mutex_lock(&port->mutex); + mutex_lock(&port->buf_mutex); if (port->xmit_buf == NULL) port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); - mutex_unlock(&port->mutex); + mutex_unlock(&port->buf_mutex); if (port->xmit_buf == NULL) return -ENOMEM; return 0; @@ -46,12 +47,12 @@ EXPORT_SYMBOL(tty_port_alloc_xmit_buf); void tty_port_free_xmit_buf(struct tty_port *port) { - mutex_lock(&port->mutex); + mutex_lock(&port->buf_mutex); if (port->xmit_buf != NULL) { free_page((unsigned long)port->xmit_buf); port->xmit_buf = NULL; } - mutex_unlock(&port->mutex); + mutex_unlock(&port->buf_mutex); } EXPORT_SYMBOL(tty_port_free_xmit_buf); diff --git a/include/linux/tty.h b/include/linux/tty.h index 6352ac257fc..e9269ca1542 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -212,6 +212,7 @@ struct tty_port { wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* TTY flags ASY_*/ struct mutex mutex; /* Locking */ + struct mutex buf_mutex; /* Buffer alloc lock */ unsigned char *xmit_buf; /* Optional buffer */ unsigned int close_delay; /* Close port delay */ unsigned int closing_wait; /* Delay for output */ -- cgit v1.2.3 From 8f1e672344c39465b58cf3ffcf348afb2539ced9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:16:47 +0000 Subject: tty: riscom8: switch to the tty_port_open API Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/riscom8.c | 89 +++++++++++++++++++++++--------------------------- 1 file changed, 41 insertions(+), 48 deletions(-) diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 3cfa22d469e..0a8d1e56c99 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -793,26 +793,21 @@ static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp, } /* Must be called with interrupts enabled */ -static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp, - struct riscom_port *port) +static int rc_activate_port(struct tty_port *port, struct tty_struct *tty) { + struct riscom_port *rp = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(rp); unsigned long flags; - if (port->port.flags & ASYNC_INITIALIZED) - return 0; - - if (tty_port_alloc_xmit_buf(&port->port) < 0) + if (tty_port_alloc_xmit_buf(port) < 0) return -ENOMEM; spin_lock_irqsave(&riscom_lock, flags); clear_bit(TTY_IO_ERROR, &tty->flags); - if (port->port.count == 1) - bp->count++; - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - rc_change_speed(tty, bp, port); - port->port.flags |= ASYNC_INITIALIZED; - + bp->count++; + rp->xmit_cnt = rp->xmit_head = rp->xmit_tail = 0; + rc_change_speed(tty, bp, rp); spin_unlock_irqrestore(&riscom_lock, flags); return 0; } @@ -821,9 +816,6 @@ static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp, static void rc_shutdown_port(struct tty_struct *tty, struct riscom_board *bp, struct riscom_port *port) { - if (!(port->port.flags & ASYNC_INITIALIZED)) - return; - #ifdef RC_REPORT_OVERRUN printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n", board_No(bp), port_No(port), port->overrun); @@ -840,11 +832,6 @@ static void rc_shutdown_port(struct tty_struct *tty, } #endif tty_port_free_xmit_buf(&port->port); - if (C_HUPCL(tty)) { - /* Drop DTR */ - bp->DTR |= (1u << port_No(port)); - rc_out(bp, RC_DTR, bp->DTR); - } /* Select port */ rc_out(bp, CD180_CAR, port_No(port)); @@ -856,7 +843,6 @@ static void rc_shutdown_port(struct tty_struct *tty, rc_out(bp, CD180_IER, port->IER); set_bit(TTY_IO_ERROR, &tty->flags); - port->port.flags &= ~ASYNC_INITIALIZED; if (--bp->count < 0) { printk(KERN_INFO "rc%d: rc_shutdown_port: " @@ -889,6 +875,20 @@ static int carrier_raised(struct tty_port *port) return CD; } +static void dtr_rts(struct tty_port *port, int onoff) +{ + struct riscom_port *p = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(p); + unsigned long flags; + + spin_lock_irqsave(&riscom_lock, flags); + bp->DTR &= ~(1u << port_No(p)); + if (onoff == 0) + bp->DTR |= (1u << port_No(p)); + rc_out(bp, RC_DTR, bp->DTR); + spin_unlock_irqrestore(&riscom_lock, flags); +} + static int rc_open(struct tty_struct *tty, struct file *filp) { int board; @@ -909,14 +909,7 @@ static int rc_open(struct tty_struct *tty, struct file *filp) if (error) return error; - port->port.count++; - tty->driver_data = port; - tty_port_tty_set(&port->port, tty); - - error = rc_setup_port(tty, bp, port); - if (error == 0) - error = tty_port_block_til_ready(&port->port, tty, filp); - return error; + return tty_port_open(&port->port, tty, filp); } static void rc_flush_buffer(struct tty_struct *tty) @@ -950,24 +943,23 @@ static void rc_close_port(struct tty_port *port) spin_lock_irqsave(&riscom_lock, flags); rp->IER &= ~IER_RXD; - if (port->flags & ASYNC_INITIALIZED) { - rp->IER &= ~IER_TXRDY; - rp->IER |= IER_TXEMPTY; - rc_out(bp, CD180_CAR, port_No(rp)); - rc_out(bp, CD180_IER, rp->IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (rp->IER & IER_TXEMPTY) { - spin_unlock_irqrestore(&riscom_lock, flags); - msleep_interruptible(jiffies_to_msecs(rp->timeout)); - spin_lock_irqsave(&riscom_lock, flags); - if (time_after(jiffies, timeout)) - break; - } + + rp->IER &= ~IER_TXRDY; + rp->IER |= IER_TXEMPTY; + rc_out(bp, CD180_CAR, port_No(rp)); + rc_out(bp, CD180_IER, rp->IER); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies + HZ; + while (rp->IER & IER_TXEMPTY) { + spin_unlock_irqrestore(&riscom_lock, flags); + msleep_interruptible(jiffies_to_msecs(rp->timeout)); + spin_lock_irqsave(&riscom_lock, flags); + if (time_after(jiffies, timeout)) + break; } rc_shutdown_port(port->tty, bp, rp); spin_unlock_irqrestore(&riscom_lock, flags); @@ -1354,7 +1346,6 @@ static void rc_hangup(struct tty_struct *tty) if (rc_paranoia_check(port, tty->name, "rc_hangup")) return; - rc_shutdown_port(tty, port_Board(port), port); tty_port_hangup(&port->port); } @@ -1401,7 +1392,9 @@ static const struct tty_operations riscom_ops = { static const struct tty_port_operations riscom_port_ops = { .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, .shutdown = rc_close_port, + .activate = rc_activate_port, }; -- cgit v1.2.3 From d74e8286885ac9f3ccc5e2dc2301f21bbec90f7b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:16:52 +0000 Subject: tty: tty_port: Add IO_ERROR bit handling To propogate tty_port_open/close to a few other devices we need to start handling the IO_ERROR flag on the tty. We can do this pretty trivially. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 3ef644a2e51..43a190738fe 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -122,8 +122,10 @@ void tty_port_hangup(struct tty_port *port) spin_lock_irqsave(&port->lock, flags); port->count = 0; port->flags &= ~ASYNC_NORMAL_ACTIVE; - if (port->tty) + if (port->tty) { + set_bit(TTY_IO_ERROR, &port->tty->flags); tty_kref_put(port->tty); + } port->tty = NULL; spin_unlock_irqrestore(&port->lock, flags); wake_up_interruptible(&port->open_wait); @@ -383,6 +385,7 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty, if (tty_port_close_start(port, tty, filp) == 0) return; tty_port_shutdown(port); + set_bit(TTY_IO_ERROR, &tty->flags); tty_port_close_end(port, tty); tty_port_tty_set(port, NULL); } @@ -414,6 +417,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, } } set_bit(ASYNCB_INITIALIZED, &port->flags); + clear_bit(TTY_IO_ERROR, &tty->flags); } mutex_unlock(&port->mutex); return tty_port_block_til_ready(port, tty, filp); -- cgit v1.2.3 From a9a37ec33a1b3e66b260ac1c29bff0aec8b89ae4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:16:57 +0000 Subject: tty: tty_port: Move the IO_ERROR clear Some devices want to set IO_ERROR in their activate methods so that you can be handed a 'dead' port for operations like setserial. Thus we need to clear the flag before activate so that activate can choose to set the flag and still return 0. This is fine as the file handle/tty are not accessible to the user yet. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 43a190738fe..84006de2900 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -409,6 +409,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, mutex_lock(&port->mutex); if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) { + clear_bit(TTY_IO_ERROR, &tty->flags); if (port->ops->activate) { int retval = port->ops->activate(port, tty); if (retval) { @@ -417,7 +418,6 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, } } set_bit(ASYNCB_INITIALIZED, &port->flags); - clear_bit(TTY_IO_ERROR, &tty->flags); } mutex_unlock(&port->mutex); return tty_port_block_til_ready(port, tty, filp); -- cgit v1.2.3 From 047e9658ae3f67708f7dcb0169c97febce23c5d3 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:03 +0000 Subject: tty: stallion: Convert to the tty_port_open/close methods The driver is already structured this way so just slice and dice Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/stallion.c | 116 +++++++++++++++--------------------------------- 1 file changed, 35 insertions(+), 81 deletions(-) diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index b4ba5edea33..0e511d61f54 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -702,6 +702,24 @@ static struct stlbrd *stl_allocbrd(void) /*****************************************************************************/ +static int stl_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct stlport *portp = container_of(port, struct stlport, port); + if (!portp->tx.buf) { + portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); + if (!portp->tx.buf) + return -ENOMEM; + portp->tx.head = portp->tx.buf; + portp->tx.tail = portp->tx.buf; + } + stl_setport(portp, tty->termios); + portp->sigs = stl_getsignals(portp); + stl_setsignals(portp, 1, 1); + stl_enablerxtx(portp, 1, 1); + stl_startrxtx(portp, 1, 0); + return 0; +} + static int stl_open(struct tty_struct *tty, struct file *filp) { struct stlport *portp; @@ -737,32 +755,8 @@ static int stl_open(struct tty_struct *tty, struct file *filp) if (portp == NULL) return -ENODEV; port = &portp->port; + return tty_port_open(&portp->port, tty, filp); -/* - * On the first open of the device setup the port hardware, and - * initialize the per port data structure. - */ - tty_port_tty_set(port, tty); - tty->driver_data = portp; - port->count++; - - if ((port->flags & ASYNC_INITIALIZED) == 0) { - if (!portp->tx.buf) { - portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); - if (!portp->tx.buf) - return -ENOMEM; - portp->tx.head = portp->tx.buf; - portp->tx.tail = portp->tx.buf; - } - stl_setport(portp, tty->termios); - portp->sigs = stl_getsignals(portp); - stl_setsignals(portp, 1, 1); - stl_enablerxtx(portp, 1, 1); - stl_startrxtx(portp, 1, 0); - clear_bit(TTY_IO_ERROR, &tty->flags); - port->flags |= ASYNC_INITIALIZED; - } - return tty_port_block_til_ready(port, tty, filp); } /*****************************************************************************/ @@ -826,38 +820,12 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) /*****************************************************************************/ -static void stl_close(struct tty_struct *tty, struct file *filp) +static void stl_shutdown(struct tty_port *port) { - struct stlport *portp; - struct tty_port *port; - unsigned long flags; - - pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); - - portp = tty->driver_data; - BUG_ON(portp == NULL); - - port = &portp->port; - - if (tty_port_close_start(port, tty, filp) == 0) - return; -/* - * May want to wait for any data to drain before closing. The BUSY - * flag keeps track of whether we are still sending or not - it is - * very accurate for the cd1400, not quite so for the sc26198. - * (The sc26198 has no "end-of-data" interrupt only empty FIFO) - */ - stl_waituntilsent(tty, (HZ / 2)); - - spin_lock_irqsave(&port->lock, flags); - portp->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->lock, flags); - + struct stlport *portp = container_of(port, struct stlport, port); stl_disableintrs(portp); - if (tty->termios->c_cflag & HUPCL) - stl_setsignals(portp, 0, 0); stl_enablerxtx(portp, 0, 0); - stl_flushbuffer(tty); + stl_flush(portp); portp->istate = 0; if (portp->tx.buf != NULL) { kfree(portp->tx.buf); @@ -865,9 +833,16 @@ static void stl_close(struct tty_struct *tty, struct file *filp) portp->tx.head = NULL; portp->tx.tail = NULL; } +} + +static void stl_close(struct tty_struct *tty, struct file *filp) +{ + struct stlport*portp; + pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); - tty_port_close_end(port, tty); - tty_port_tty_set(port, NULL); + portp = tty->driver_data; + BUG_ON(portp == NULL); + tty_port_close(&portp->port, tty, filp); } /*****************************************************************************/ @@ -1314,35 +1289,12 @@ static void stl_stop(struct tty_struct *tty) static void stl_hangup(struct tty_struct *tty) { - struct stlport *portp; - struct tty_port *port; - unsigned long flags; - + struct stlport *portp = tty->driver_data; pr_debug("stl_hangup(tty=%p)\n", tty); - portp = tty->driver_data; if (portp == NULL) return; - port = &portp->port; - - spin_lock_irqsave(&port->lock, flags); - port->flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->lock, flags); - - stl_disableintrs(portp); - if (tty->termios->c_cflag & HUPCL) - stl_setsignals(portp, 0, 0); - stl_enablerxtx(portp, 0, 0); - stl_flushbuffer(tty); - portp->istate = 0; - set_bit(TTY_IO_ERROR, &tty->flags); - if (portp->tx.buf != NULL) { - kfree(portp->tx.buf); - portp->tx.buf = NULL; - portp->tx.head = NULL; - portp->tx.tail = NULL; - } - tty_port_hangup(port); + tty_port_hangup(&portp->port); } /*****************************************************************************/ @@ -2550,6 +2502,8 @@ static const struct tty_operations stl_ops = { static const struct tty_port_operations stl_port_ops = { .carrier_raised = stl_carrier_raised, .dtr_rts = stl_dtr_rts, + .activate = stl_activate, + .shutdown = stl_shutdown, }; /*****************************************************************************/ -- cgit v1.2.3 From 338818fd802a6baacb7e5b6910d52c8996ca6d28 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:08 +0000 Subject: tty: istallion: tty port open/close methods Slice/dice/repeat as with the stallion driver this is just code shuffling and removal Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/istallion.c | 177 ++++++++++++++++------------------------------- 1 file changed, 60 insertions(+), 117 deletions(-) diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index babfd4401f6..4cd6c527ee4 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -213,7 +213,6 @@ static int stli_shared; * with the slave. Most of them need to be updated atomically, so always * use the bit setting operations (unless protected by cli/sti). */ -#define ST_INITIALIZING 1 #define ST_OPENING 2 #define ST_CLOSING 3 #define ST_CMDING 4 @@ -783,13 +782,32 @@ static int stli_parsebrd(struct stlconf *confp, char **argp) /*****************************************************************************/ +/* + * On the first open of the device setup the port hardware, and + * initialize the per port data structure. Since initializing the port + * requires several commands to the board we will need to wait for any + * other open that is already initializing the port. + * + * Locking: protected by the port mutex. + */ + +static int stli_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct stliport *portp = container_of(port, struct stliport, port); + struct stlibrd *brdp = stli_brds[portp->brdnr]; + int rc; + + if ((rc = stli_initopen(tty, brdp, portp)) >= 0) + clear_bit(TTY_IO_ERROR, &tty->flags); + wake_up_interruptible(&portp->raw_wait); + return rc; +} + static int stli_open(struct tty_struct *tty, struct file *filp) { struct stlibrd *brdp; struct stliport *portp; - struct tty_port *port; unsigned int minordev, brdnr, portnr; - int rc; minordev = tty->index; brdnr = MINOR2BRD(minordev); @@ -809,95 +827,56 @@ static int stli_open(struct tty_struct *tty, struct file *filp) return -ENODEV; if (portp->devnr < 1) return -ENODEV; - port = &portp->port; - -/* - * On the first open of the device setup the port hardware, and - * initialize the per port data structure. Since initializing the port - * requires several commands to the board we will need to wait for any - * other open that is already initializing the port. - * - * Review - locking - */ - tty_port_tty_set(port, tty); - tty->driver_data = portp; - port->count++; - - wait_event_interruptible(portp->raw_wait, - !test_bit(ST_INITIALIZING, &portp->state)); - if (signal_pending(current)) - return -ERESTARTSYS; - - if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { - set_bit(ST_INITIALIZING, &portp->state); - if ((rc = stli_initopen(tty, brdp, portp)) >= 0) { - /* Locking */ - port->flags |= ASYNC_INITIALIZED; - clear_bit(TTY_IO_ERROR, &tty->flags); - } - clear_bit(ST_INITIALIZING, &portp->state); - wake_up_interruptible(&portp->raw_wait); - if (rc < 0) - return rc; - } - return tty_port_block_til_ready(&portp->port, tty, filp); + return tty_port_open(&portp->port, tty, filp); } + /*****************************************************************************/ -static void stli_close(struct tty_struct *tty, struct file *filp) +static void stli_shutdown(struct tty_port *port) { struct stlibrd *brdp; - struct stliport *portp; - struct tty_port *port; + unsigned long ftype; unsigned long flags; + struct stliport *portp = container_of(port, struct stliport, port); - portp = tty->driver_data; - if (portp == NULL) + if (portp->brdnr >= stli_nrbrds) return; - port = &portp->port; - - if (tty_port_close_start(port, tty, filp) == 0) + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) return; -/* - * May want to wait for data to drain before closing. The BUSY flag - * keeps track of whether we are still transmitting or not. It is - * updated by messages from the slave - indicating when all chars - * really have drained. - */ - spin_lock_irqsave(&stli_lock, flags); - if (tty == stli_txcooktty) - stli_flushchars(tty); - spin_unlock_irqrestore(&stli_lock, flags); - - /* We end up doing this twice for the moment. This needs looking at - eventually. Note we still use portp->closing_wait as a result */ - if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, portp->closing_wait); + /* + * May want to wait for data to drain before closing. The BUSY + * flag keeps track of whether we are still transmitting or not. + * It is updated by messages from the slave - indicating when all + * chars really have drained. + */ - /* FIXME: port locking here needs attending to */ - port->flags &= ~ASYNC_INITIALIZED; + if (!test_bit(ST_CLOSING, &portp->state)) + stli_rawclose(brdp, portp, 0, 0); - brdp = stli_brds[portp->brdnr]; - stli_rawclose(brdp, portp, 0, 0); - if (tty->termios->c_cflag & HUPCL) { - stli_mkasysigs(&portp->asig, 0, 0); - if (test_bit(ST_CMDING, &portp->state)) - set_bit(ST_DOSIGS, &portp->state); - else - stli_sendcmd(brdp, portp, A_SETSIGNALS, &portp->asig, - sizeof(asysigs_t), 0); - } + spin_lock_irqsave(&stli_lock, flags); clear_bit(ST_TXBUSY, &portp->state); clear_bit(ST_RXSTOP, &portp->state); - set_bit(TTY_IO_ERROR, &tty->flags); - tty_ldisc_flush(tty); - set_bit(ST_DOFLUSHRX, &portp->state); - stli_flushbuffer(tty); + spin_unlock_irqrestore(&stli_lock, flags); - tty_port_close_end(port, tty); - tty_port_tty_set(port, NULL); + ftype = FLUSHTX | FLUSHRX; + stli_cmdwait(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0); +} + +static void stli_close(struct tty_struct *tty, struct file *filp) +{ + struct stliport *portp = tty->driver_data; + unsigned long flags; + if (portp == NULL) + return; + spin_lock_irqsave(&stli_lock, flags); + /* Flush any internal buffering out first */ + if (tty == stli_txcooktty) + stli_flushchars(tty); + spin_unlock_irqrestore(&stli_lock, flags); + tty_port_close(&portp->port, tty, filp); } /*****************************************************************************/ @@ -1724,6 +1703,7 @@ static void stli_start(struct tty_struct *tty) /*****************************************************************************/ + /* * Hangup this port. This is pretty much like closing the port, only * a little more brutal. No waiting for data to drain. Shutdown the @@ -1733,47 +1713,8 @@ static void stli_start(struct tty_struct *tty) static void stli_hangup(struct tty_struct *tty) { - struct stliport *portp; - struct stlibrd *brdp; - struct tty_port *port; - unsigned long flags; - - portp = tty->driver_data; - if (portp == NULL) - return; - if (portp->brdnr >= stli_nrbrds) - return; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return; - port = &portp->port; - - spin_lock_irqsave(&port->lock, flags); - port->flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->lock, flags); - - if (!test_bit(ST_CLOSING, &portp->state)) - stli_rawclose(brdp, portp, 0, 0); - - spin_lock_irqsave(&stli_lock, flags); - if (tty->termios->c_cflag & HUPCL) { - stli_mkasysigs(&portp->asig, 0, 0); - if (test_bit(ST_CMDING, &portp->state)) { - set_bit(ST_DOSIGS, &portp->state); - set_bit(ST_DOFLUSHTX, &portp->state); - set_bit(ST_DOFLUSHRX, &portp->state); - } else { - stli_sendcmd(brdp, portp, A_SETSIGNALSF, - &portp->asig, sizeof(asysigs_t), 0); - } - } - - clear_bit(ST_TXBUSY, &portp->state); - clear_bit(ST_RXSTOP, &portp->state); - set_bit(TTY_IO_ERROR, &tty->flags); - spin_unlock_irqrestore(&stli_lock, flags); - - tty_port_hangup(port); + struct stliport *portp = tty->driver_data; + tty_port_hangup(&portp->port); } /*****************************************************************************/ @@ -4420,6 +4361,8 @@ static const struct tty_operations stli_ops = { static const struct tty_port_operations stli_port_ops = { .carrier_raised = stli_carrier_raised, .dtr_rts = stli_dtr_rts, + .activate = stli_activate, + .shutdown = stli_shutdown, }; /*****************************************************************************/ -- cgit v1.2.3 From 568aafc627e2978509e8a80c640ba534d1e843cc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:14 +0000 Subject: tty: tty_port: Add a kref object to the tty port Users of tty port need a way to refcount ports when hotplugging is involved. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 18 ++++++++++++++++++ include/linux/tty.h | 12 ++++++++++++ 2 files changed, 30 insertions(+) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 84006de2900..be492dd6643 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -29,6 +29,7 @@ void tty_port_init(struct tty_port *port) spin_lock_init(&port->lock); port->close_delay = (50 * HZ) / 100; port->closing_wait = (3000 * HZ) / 100; + kref_init(&port->kref); } EXPORT_SYMBOL(tty_port_init); @@ -56,6 +57,23 @@ void tty_port_free_xmit_buf(struct tty_port *port) } EXPORT_SYMBOL(tty_port_free_xmit_buf); +static void tty_port_destructor(struct kref *kref) +{ + struct tty_port *port = container_of(kref, struct tty_port, kref); + if (port->xmit_buf) + free_page((unsigned long)port->xmit_buf); + if (port->ops->destruct) + port->ops->destruct(port); + else + kfree(port); +} + +void tty_port_put(struct tty_port *port) +{ + if (port) + kref_put(&port->kref, tty_port_destructor); +} +EXPORT_SYMBOL(tty_port_put); /** * tty_port_tty_get - get a tty reference diff --git a/include/linux/tty.h b/include/linux/tty.h index e9269ca1542..e6da667ba34 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -199,6 +199,8 @@ struct tty_port_operations { /* FIXME: long term getting the tty argument *out* of this would be good for consoles */ int (*activate)(struct tty_port *port, struct tty_struct *tty); + /* Called on the final put of a port */ + void (*destruct)(struct tty_port *port); }; struct tty_port { @@ -219,6 +221,7 @@ struct tty_port { int drain_delay; /* Set to zero if no pure time based drain is needed else set to size of fifo */ + struct kref kref; /* Ref counter */ }; /* @@ -461,6 +464,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay); extern void tty_port_init(struct tty_port *port); extern int tty_port_alloc_xmit_buf(struct tty_port *port); extern void tty_port_free_xmit_buf(struct tty_port *port); +extern void tty_port_put(struct tty_port *port); + +extern inline struct tty_port *tty_port_get(struct tty_port *port) +{ + if (port) + kref_get(&port->kref); + return port; +} + extern struct tty_struct *tty_port_tty_get(struct tty_port *port); extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty); extern int tty_port_carrier_raised(struct tty_port *port); -- cgit v1.2.3 From baaa08acb0ca2df47830b58b5df8b9059cf9ddd2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:24 +0000 Subject: tty: isicom: switch to the new tty_port_open helper Trivial conversion in this case so might as well do it while testing the port_open design is right Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/isicom.c | 88 ++++++++++++--------------------------------------- 1 file changed, 21 insertions(+), 67 deletions(-) diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 426bfdd7f3e..e7be3ec6d21 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -804,24 +804,21 @@ static inline void isicom_setup_board(struct isi_board *bp) bp->status |= BOARD_ACTIVE; for (channel = 0; channel < bp->port_count; channel++, port++) drop_dtr_rts(port); + bp->count++; spin_unlock_irqrestore(&bp->card_lock, flags); } -static int isicom_setup_port(struct tty_struct *tty) +static int isicom_activate(struct tty_port *tport, struct tty_struct *tty) { - struct isi_port *port = tty->driver_data; + struct isi_port *port = container_of(tport, struct isi_port, port); struct isi_board *card = port->card; unsigned long flags; - if (port->port.flags & ASYNC_INITIALIZED) - return 0; - if (tty_port_alloc_xmit_buf(&port->port) < 0) + if (tty_port_alloc_xmit_buf(tport) < 0) return -ENOMEM; spin_lock_irqsave(&card->card_lock, flags); - clear_bit(TTY_IO_ERROR, &tty->flags); - if (port->port.count == 1) - card->count++; + isicom_setup_board(card); port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; @@ -832,9 +829,7 @@ static int isicom_setup_port(struct tty_struct *tty) outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base); InterruptTheCard(card->base); } - isicom_config_port(tty); - port->port.flags |= ASYNC_INITIALIZED; spin_unlock_irqrestore(&card->card_lock, flags); return 0; @@ -871,31 +866,20 @@ static struct tty_port *isicom_find_port(struct tty_struct *tty) return &port->port; } - + static int isicom_open(struct tty_struct *tty, struct file *filp) { struct isi_port *port; struct isi_board *card; struct tty_port *tport; - int error = 0; tport = isicom_find_port(tty); if (tport == NULL) return -ENODEV; port = container_of(tport, struct isi_port, port); card = &isi_card[BOARD(tty->index)]; - isicom_setup_board(card); - /* FIXME: locking on port.count etc */ - port->port.count++; - tty->driver_data = port; - tty_port_tty_set(&port->port, tty); - /* FIXME: Locking on Initialized flag */ - if (!test_bit(ASYNCB_INITIALIZED, &tport->flags)) - error = isicom_setup_port(tty); - if (error == 0) - error = tty_port_block_til_ready(&port->port, tty, filp); - return error; + return tty_port_open(tport, tty, filp); } /* close et all */ @@ -914,40 +898,21 @@ static void isicom_shutdown_port(struct isi_port *port) tty = tty_port_tty_get(&port->port); - if (!(port->port.flags & ASYNC_INITIALIZED)) { - tty_kref_put(tty); - return; - } - tty_port_free_xmit_buf(&port->port); - port->port.flags &= ~ASYNC_INITIALIZED; - /* 3rd October 2000 : Vinayak P Risbud */ - tty_port_tty_set(&port->port, NULL); - - /*Fix done by Anil .S on 30-04-2001 - remote login through isi port has dtr toggle problem - due to which the carrier drops before the password prompt - appears on the remote end. Now we drop the dtr only if the - HUPCL(Hangup on close) flag is set for the tty*/ - - if (C_HUPCL(tty)) - /* drop dtr on this port */ - drop_dtr(port); - - /* any other port uninits */ - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); - if (--card->count < 0) { pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n", card->base, card->count); card->count = 0; } - /* last port was closed, shutdown that boad too */ - if (C_HUPCL(tty)) { - if (!card->count) - isicom_shutdown_board(card); + /* last port was closed, shutdown that board too */ + if (tty && C_HUPCL(tty)) { + /* FIXME: this logic is bogus - it's the old logic that was + bogus before but it still wants fixing */ + if (!card->count) { + if (card->status & BOARD_ACTIVE) + card->status &= ~BOARD_ACTIVE; + } } tty_kref_put(tty); } @@ -968,7 +933,7 @@ static void isicom_flush_buffer(struct tty_struct *tty) tty_wakeup(tty); } -static void isicom_close_port(struct tty_port *port) +static void isicom_shutdown(struct tty_port *port) { struct isi_port *ip = container_of(port, struct isi_port, port); struct isi_board *card = ip->card; @@ -977,10 +942,8 @@ static void isicom_close_port(struct tty_port *port) /* indicate to the card that no more data can be received on this port */ spin_lock_irqsave(&card->card_lock, flags); - if (port->flags & ASYNC_INITIALIZED) { - card->port_status &= ~(1 << ip->channel); - outw(card->port_status, card->base + 0x02); - } + card->port_status &= ~(1 << ip->channel); + outw(card->port_status, card->base + 0x02); isicom_shutdown_port(ip); spin_unlock_irqrestore(&card->card_lock, flags); } @@ -991,12 +954,7 @@ static void isicom_close(struct tty_struct *tty, struct file *filp) struct tty_port *port = &ip->port; if (isicom_paranoia_check(ip, tty->name, "isicom_close")) return; - - if (tty_port_close_start(port, tty, filp) == 0) - return; - isicom_close_port(port); - isicom_flush_buffer(tty); - tty_port_close_end(port, tty); + tty_port_close(port, tty, filp); } /* write et all */ @@ -1326,15 +1284,9 @@ static void isicom_start(struct tty_struct *tty) static void isicom_hangup(struct tty_struct *tty) { struct isi_port *port = tty->driver_data; - unsigned long flags; if (isicom_paranoia_check(port, tty->name, "isicom_hangup")) return; - - spin_lock_irqsave(&port->card->card_lock, flags); - isicom_shutdown_port(port); - spin_unlock_irqrestore(&port->card->card_lock, flags); - tty_port_hangup(&port->port); } @@ -1367,6 +1319,8 @@ static const struct tty_operations isicom_ops = { static const struct tty_port_operations isicom_port_ops = { .carrier_raised = isicom_carrier_raised, .dtr_rts = isicom_dtr_rts, + .activate = isicom_activate, + .shutdown = isicom_shutdown, }; static int __devinit reset_card(struct pci_dev *pdev, -- cgit v1.2.3 From 6ed847d8efd08658ece10c9129cd511c8d7452cd Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:30 +0000 Subject: tty: isicom: sort out the board init logic Split this into two flags - INIT meaning the board is set up and ACTIVE meaning the board has ports open. Remove the broken HUPCL casing and push the counts somewhere sensible. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/isicom.c | 41 +++++++++++------------------------------ include/linux/isicom.h | 1 + 2 files changed, 12 insertions(+), 30 deletions(-) diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index e7be3ec6d21..1e91c302ee4 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -793,21 +793,19 @@ static inline void isicom_setup_board(struct isi_board *bp) { int channel; struct isi_port *port; - unsigned long flags; - spin_lock_irqsave(&bp->card_lock, flags); - if (bp->status & BOARD_ACTIVE) { - spin_unlock_irqrestore(&bp->card_lock, flags); - return; - } - port = bp->ports; - bp->status |= BOARD_ACTIVE; - for (channel = 0; channel < bp->port_count; channel++, port++) - drop_dtr_rts(port); bp->count++; - spin_unlock_irqrestore(&bp->card_lock, flags); + if (!(bp->status & BOARD_INIT)) { + port = bp->ports; + for (channel = 0; channel < bp->port_count; channel++, port++) + drop_dtr_rts(port); + } + bp->status |= BOARD_ACTIVE | BOARD_INIT; } +/* Activate and thus setup board are protected from races against shutdown + by the tty_port mutex */ + static int isicom_activate(struct tty_port *tport, struct tty_struct *tty) { struct isi_port *port = container_of(tport, struct isi_port, port); @@ -884,19 +882,10 @@ static int isicom_open(struct tty_struct *tty, struct file *filp) /* close et all */ -static inline void isicom_shutdown_board(struct isi_board *bp) -{ - if (bp->status & BOARD_ACTIVE) - bp->status &= ~BOARD_ACTIVE; -} - /* card->lock HAS to be held */ static void isicom_shutdown_port(struct isi_port *port) { struct isi_board *card = port->card; - struct tty_struct *tty; - - tty = tty_port_tty_get(&port->port); tty_port_free_xmit_buf(&port->port); if (--card->count < 0) { @@ -904,17 +893,9 @@ static void isicom_shutdown_port(struct isi_port *port) card->base, card->count); card->count = 0; } - /* last port was closed, shutdown that board too */ - if (tty && C_HUPCL(tty)) { - /* FIXME: this logic is bogus - it's the old logic that was - bogus before but it still wants fixing */ - if (!card->count) { - if (card->status & BOARD_ACTIVE) - card->status &= ~BOARD_ACTIVE; - } - } - tty_kref_put(tty); + if (!card->count) + card->status &= BOARD_ACTIVE; } static void isicom_flush_buffer(struct tty_struct *tty) diff --git a/include/linux/isicom.h b/include/linux/isicom.h index bbd42197298..b92e0565063 100644 --- a/include/linux/isicom.h +++ b/include/linux/isicom.h @@ -67,6 +67,7 @@ #define FIRMWARE_LOADED 0x0001 #define BOARD_ACTIVE 0x0002 +#define BOARD_INIT 0x0004 /* isi_port status bitmap */ -- cgit v1.2.3 From 6769140d304731f0a3b177470a2adb4bacd9036b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:35 +0000 Subject: tty: mxser: use the tty_port_open method At first this looks a fairly trivial conversion but we can't quite push everything into the right format yet. The open side is easy but care is needed over the setserial methods. Fix up the locking now that we've adopted the port->mutex locking rule for the initialization. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/mxser.c | 111 ++++++++++++++++----------------------------------- 1 file changed, 35 insertions(+), 76 deletions(-) diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 5e28d39b9e8..9dac516df00 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -856,9 +856,9 @@ static void mxser_check_modem_status(struct tty_struct *tty, } } -static int mxser_startup(struct tty_struct *tty) +static int mxser_activate(struct tty_port *port, struct tty_struct *tty) { - struct mxser_port *info = tty->driver_data; + struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long page; unsigned long flags; @@ -868,22 +868,13 @@ static int mxser_startup(struct tty_struct *tty) spin_lock_irqsave(&info->slock, flags); - if (info->port.flags & ASYNC_INITIALIZED) { - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - if (!info->ioaddr || !info->type) { set_bit(TTY_IO_ERROR, &tty->flags); free_page(page); spin_unlock_irqrestore(&info->slock, flags); return 0; } - if (info->port.xmit_buf) - free_page(page); - else - info->port.xmit_buf = (unsigned char *) page; + info->port.xmit_buf = (unsigned char *) page; /* * Clear the FIFO buffers and disable them @@ -951,24 +942,19 @@ static int mxser_startup(struct tty_struct *tty) * and set the speed of the serial port */ mxser_change_speed(tty, NULL); - info->port.flags |= ASYNC_INITIALIZED; spin_unlock_irqrestore(&info->slock, flags); return 0; } /* - * This routine will shutdown a serial port; interrupts maybe disabled, and - * DTR is dropped if the hangup on close termio flag is on. + * This routine will shutdown a serial port */ -static void mxser_shutdown(struct tty_struct *tty) +static void mxser_shutdown_port(struct tty_port *port) { - struct mxser_port *info = tty->driver_data; + struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long flags; - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - spin_lock_irqsave(&info->slock, flags); /* @@ -978,7 +964,7 @@ static void mxser_shutdown(struct tty_struct *tty) wake_up_interruptible(&info->port.delta_msr_wait); /* - * Free the IRQ, if necessary + * Free the xmit buffer, if necessary */ if (info->port.xmit_buf) { free_page((unsigned long) info->port.xmit_buf); @@ -988,10 +974,6 @@ static void mxser_shutdown(struct tty_struct *tty) info->IER = 0; outb(0x00, info->ioaddr + UART_IER); - if (tty->termios->c_cflag & HUPCL) - info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); - outb(info->MCR, info->ioaddr + UART_MCR); - /* clear Rx/Tx FIFO's */ if (info->board->chip_flag) outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | @@ -1004,9 +986,6 @@ static void mxser_shutdown(struct tty_struct *tty) /* read data port to reset things */ (void) inb(info->ioaddr + UART_RX); - set_bit(TTY_IO_ERROR, &tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED; if (info->board->chip_flag) SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); @@ -1023,8 +1002,7 @@ static void mxser_shutdown(struct tty_struct *tty) static int mxser_open(struct tty_struct *tty, struct file *filp) { struct mxser_port *info; - unsigned long flags; - int retval, line; + int line; line = tty->index; if (line == MXSER_PORTS) @@ -1035,23 +1013,7 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) if (!info->ioaddr) return -ENODEV; - tty->driver_data = info; - tty_port_tty_set(&info->port, tty); - /* - * Start up serial port - */ - spin_lock_irqsave(&info->port.lock, flags); - info->port.count++; - spin_unlock_irqrestore(&info->port.lock, flags); - retval = mxser_startup(tty); - if (retval) - return retval; - - retval = tty_port_block_til_ready(&info->port, tty, filp); - if (retval) - return retval; - - return 0; + return tty_port_open(&info->port, tty, filp); } static void mxser_flush_buffer(struct tty_struct *tty) @@ -1075,18 +1037,10 @@ static void mxser_flush_buffer(struct tty_struct *tty) } -static void mxser_close_port(struct tty_struct *tty, struct tty_port *port) +static void mxser_close_port(struct tty_port *port) { struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long timeout; - /* - * Save the termios structure, since this port may have - * separate termios for callout and dialin. - * - * FIXME: Can this go ? - */ - if (port->flags & ASYNC_NORMAL_ACTIVE) - info->normal_termios = *tty->termios; /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the @@ -1097,22 +1051,18 @@ static void mxser_close_port(struct tty_struct *tty, struct tty_port *port) if (info->board->chip_flag) info->IER &= ~MOXA_MUST_RECV_ISR; - if (port->flags & ASYNC_INITIALIZED) { - outb(info->IER, info->ioaddr + UART_IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { - schedule_timeout_interruptible(5); - if (time_after(jiffies, timeout)) - break; - } + outb(info->IER, info->ioaddr + UART_IER); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies + HZ; + while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { + schedule_timeout_interruptible(5); + if (time_after(jiffies, timeout)) + break; } - mxser_shutdown(tty); - } /* @@ -1130,8 +1080,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) return; if (tty_port_close_start(port, tty, filp) == 0) return; - mxser_close_port(tty, port); + mutex_lock(&port->mutex); + mxser_close_port(port); mxser_flush_buffer(tty); + mxser_shutdown_port(port); + clear_bit(ASYNCB_INITIALIZED, &port->flags); + mutex_unlock(&port->mutex); /* Right now the tty_port set is done outside of the close_end helper as we don't yet have everyone using refcounts */ tty_port_close_end(port, tty); @@ -1329,9 +1283,13 @@ static int mxser_set_serial_info(struct tty_struct *tty, mxser_change_speed(tty, NULL); spin_unlock_irqrestore(&info->slock, sl_flags); } - } else - retval = mxser_startup(tty); - + } else { + mutex_lock(&info->port.mutex); + retval = mxser_activate(&info->port, tty); + if (retval == 0) + set_bit(ASYNCB_INITIALIZED, &info->port.flags); + mutex_unlock(&info->port.mutex); + } return retval; } @@ -2059,7 +2017,6 @@ static void mxser_hangup(struct tty_struct *tty) struct mxser_port *info = tty->driver_data; mxser_flush_buffer(tty); - mxser_shutdown(tty); tty_port_hangup(&info->port); } @@ -2363,6 +2320,8 @@ static const struct tty_operations mxser_ops = { struct tty_port_operations mxser_port_ops = { .carrier_raised = mxser_carrier_raised, .dtr_rts = mxser_dtr_rts, + .activate = mxser_activate, + .shutdown = mxser_shutdown_port, }; /* -- cgit v1.2.3 From 07f86c03fec711692121bf7f5316e0b3426acc05 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:41 +0000 Subject: tty: mxser: Use the new locking rules to fix setserial properly Propogate the init/shutdown mutex through the setserial logic. Use the proper locks for the various bits still using the BKL. Kill the BKL in this driver. Updated to fix the bug noted by Dan Carpenter Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/mxser.c | 145 +++++++++++++++++++++++++++------------------------ 1 file changed, 78 insertions(+), 67 deletions(-) diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 9dac516df00..3d923065d9a 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -1229,6 +1228,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, struct serial_struct __user *new_info) { struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; struct serial_struct new_serial; speed_t baud; unsigned long sl_flags; @@ -1244,7 +1244,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, new_serial.port != info->ioaddr) return -EINVAL; - flags = info->port.flags & ASYNC_SPD_MASK; + flags = port->flags & ASYNC_SPD_MASK; if (!capable(CAP_SYS_ADMIN)) { if ((new_serial.baud_base != info->baud_base) || @@ -1258,16 +1258,17 @@ static int mxser_set_serial_info(struct tty_struct *tty, * OK, past this point, all the error checking has been done. * At this point, we start making changes..... */ - info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) | + port->flags = ((port->flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS)); - info->port.close_delay = new_serial.close_delay * HZ / 100; - info->port.closing_wait = new_serial.closing_wait * HZ / 100; - tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) - ? 1 : 0; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + port->close_delay = new_serial.close_delay * HZ / 100; + port->closing_wait = new_serial.closing_wait * HZ / 100; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && (new_serial.baud_base != info->baud_base || new_serial.custom_divisor != info->custom_divisor)) { + if (new_serial.custom_divisor == 0) + return -EINVAL; baud = new_serial.baud_base / new_serial.custom_divisor; tty_encode_baud_rate(tty, baud, baud); } @@ -1277,18 +1278,16 @@ static int mxser_set_serial_info(struct tty_struct *tty, process_txrx_fifo(info); - if (info->port.flags & ASYNC_INITIALIZED) { - if (flags != (info->port.flags & ASYNC_SPD_MASK)) { + if (test_bit(ASYNCB_INITIALIZED, &port->flags)) { + if (flags != (port->flags & ASYNC_SPD_MASK)) { spin_lock_irqsave(&info->slock, sl_flags); mxser_change_speed(tty, NULL); spin_unlock_irqrestore(&info->slock, sl_flags); } } else { - mutex_lock(&info->port.mutex); - retval = mxser_activate(&info->port, tty); + retval = mxser_activate(port, tty); if (retval == 0) - set_bit(ASYNCB_INITIALIZED, &info->port.flags); - mutex_unlock(&info->port.mutex); + set_bit(ASYNCB_INITIALIZED, &port->flags); } return retval; } @@ -1478,7 +1477,8 @@ static int __init mxser_read_register(int port, unsigned short *regs) static int mxser_ioctl_special(unsigned int cmd, void __user *argp) { - struct mxser_port *port; + struct mxser_port *ip; + struct tty_port *port; struct tty_struct *tty; int result, status; unsigned int i, j; @@ -1494,38 +1494,39 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) case MOXA_CHKPORTENABLE: result = 0; - lock_kernel(); for (i = 0; i < MXSER_BOARDS; i++) for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) if (mxser_boards[i].ports[j].ioaddr) result |= (1 << i); - unlock_kernel(); return put_user(result, (unsigned long __user *)argp); case MOXA_GETDATACOUNT: - lock_kernel(); + /* The receive side is locked by port->slock but it isn't + clear that an exact snapshot is worth copying here */ if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) ret = -EFAULT; - unlock_kernel(); return ret; case MOXA_GETMSTATUS: { struct mxser_mstatus ms, __user *msu = argp; - lock_kernel(); for (i = 0; i < MXSER_BOARDS; i++) for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { - port = &mxser_boards[i].ports[j]; + ip = &mxser_boards[i].ports[j]; + port = &ip->port; memset(&ms, 0, sizeof(ms)); - if (!port->ioaddr) + mutex_lock(&port->mutex); + if (!ip->ioaddr) goto copy; - tty = tty_port_tty_get(&port->port); + tty = tty_port_tty_get(port); if (!tty || !tty->termios) - ms.cflag = port->normal_termios.c_cflag; + ms.cflag = ip->normal_termios.c_cflag; else ms.cflag = tty->termios->c_cflag; tty_kref_put(tty); - status = inb(port->ioaddr + UART_MSR); + spin_lock_irq(&ip->slock); + status = inb(ip->ioaddr + UART_MSR); + spin_unlock_irq(&ip->slock); if (status & UART_MSR_DCD) ms.dcd = 1; if (status & UART_MSR_DSR) @@ -1533,13 +1534,11 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (status & UART_MSR_CTS) ms.cts = 1; copy: - if (copy_to_user(msu, &ms, sizeof(ms))) { - unlock_kernel(); + mutex_unlock(&port->mutex); + if (copy_to_user(msu, &ms, sizeof(ms))) return -EFAULT; - } msu++; } - unlock_kernel(); return 0; } case MOXA_ASPP_MON_EXT: { @@ -1551,41 +1550,48 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (!me) return -ENOMEM; - lock_kernel(); for (i = 0, p = 0; i < MXSER_BOARDS; i++) { for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) { if (p >= ARRAY_SIZE(me->rx_cnt)) { i = MXSER_BOARDS; break; } - port = &mxser_boards[i].ports[j]; - if (!port->ioaddr) + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + + mutex_lock(&port->mutex); + if (!ip->ioaddr) { + mutex_unlock(&port->mutex); continue; + } - status = mxser_get_msr(port->ioaddr, 0, p); + spin_lock_irq(&ip->slock); + status = mxser_get_msr(ip->ioaddr, 0, p); if (status & UART_MSR_TERI) - port->icount.rng++; + ip->icount.rng++; if (status & UART_MSR_DDSR) - port->icount.dsr++; + ip->icount.dsr++; if (status & UART_MSR_DDCD) - port->icount.dcd++; + ip->icount.dcd++; if (status & UART_MSR_DCTS) - port->icount.cts++; + ip->icount.cts++; - port->mon_data.modem_status = status; - me->rx_cnt[p] = port->mon_data.rxcnt; - me->tx_cnt[p] = port->mon_data.txcnt; - me->up_rxcnt[p] = port->mon_data.up_rxcnt; - me->up_txcnt[p] = port->mon_data.up_txcnt; + ip->mon_data.modem_status = status; + me->rx_cnt[p] = ip->mon_data.rxcnt; + me->tx_cnt[p] = ip->mon_data.txcnt; + me->up_rxcnt[p] = ip->mon_data.up_rxcnt; + me->up_txcnt[p] = ip->mon_data.up_txcnt; me->modem_status[p] = - port->mon_data.modem_status; - tty = tty_port_tty_get(&port->port); + ip->mon_data.modem_status; + spin_unlock_irq(&ip->slock); + + tty = tty_port_tty_get(&ip->port); if (!tty || !tty->termios) { - cflag = port->normal_termios.c_cflag; - iflag = port->normal_termios.c_iflag; - me->baudrate[p] = tty_termios_baud_rate(&port->normal_termios); + cflag = ip->normal_termios.c_cflag; + iflag = ip->normal_termios.c_iflag; + me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); } else { cflag = tty->termios->c_cflag; iflag = tty->termios->c_iflag; @@ -1604,16 +1610,15 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (iflag & (IXON | IXOFF)) me->flowctrl[p] |= 0x0C; - if (port->type == PORT_16550A) + if (ip->type == PORT_16550A) me->fifo[p] = 1; - opmode = inb(port->opmode_ioaddr) >> - ((p % 4) * 2); + opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); opmode &= OP_MODE_MASK; me->iftype[p] = opmode; + mutex_unlock(&port->mutex); } } - unlock_kernel(); if (copy_to_user(argp, me, sizeof(*me))) ret = -EFAULT; kfree(me); @@ -1650,6 +1655,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; struct async_icount cnow; unsigned long flags; void __user *argp = (void __user *)arg; @@ -1674,20 +1680,20 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, opmode != RS422_MODE && opmode != RS485_4WIRE_MODE) return -EFAULT; - lock_kernel(); mask = ModeMask[p]; shiftbit = p * 2; + spin_lock_irq(&info->slock); val = inb(info->opmode_ioaddr); val &= mask; val |= (opmode << shiftbit); outb(val, info->opmode_ioaddr); - unlock_kernel(); + spin_unlock_irq(&info->slock); } else { - lock_kernel(); shiftbit = p * 2; + spin_lock_irq(&info->slock); opmode = inb(info->opmode_ioaddr) >> shiftbit; + spin_unlock_irq(&info->slock); opmode &= OP_MODE_MASK; - unlock_kernel(); if (put_user(opmode, (int __user *)argp)) return -EFAULT; } @@ -1700,14 +1706,14 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, switch (cmd) { case TIOCGSERIAL: - lock_kernel(); + mutex_lock(&port->mutex); retval = mxser_get_serial_info(tty, argp); - unlock_kernel(); + mutex_unlock(&port->mutex); return retval; case TIOCSSERIAL: - lock_kernel(); + mutex_lock(&port->mutex); retval = mxser_set_serial_info(tty, argp); - unlock_kernel(); + mutex_unlock(&port->mutex); return retval; case TIOCSERGETLSR: /* Get line status register */ return mxser_get_lsr_info(info, argp); @@ -1753,31 +1759,33 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, case MOXA_HighSpeedOn: return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); case MOXA_SDS_RSTICOUNTER: - lock_kernel(); + spin_lock_irq(&info->slock); info->mon_data.rxcnt = 0; info->mon_data.txcnt = 0; - unlock_kernel(); + spin_unlock_irq(&info->slock); return 0; case MOXA_ASPP_OQUEUE:{ int len, lsr; - lock_kernel(); len = mxser_chars_in_buffer(tty); + spin_lock(&info->slock); lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE; + spin_unlock_irq(&info->slock); len += (lsr ? 0 : 1); - unlock_kernel(); return put_user(len, (int __user *)argp); } case MOXA_ASPP_MON: { int mcr, status; - lock_kernel(); + spin_lock(&info->slock); status = mxser_get_msr(info->ioaddr, 1, tty->index); mxser_check_modem_status(tty, info, status); mcr = inb(info->ioaddr + UART_MCR); + spin_unlock(&info->slock); + if (mcr & MOXA_MUST_MCR_XON_FLAG) info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; else @@ -1792,7 +1800,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; else info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; - unlock_kernel(); + if (copy_to_user(argp, &info->mon_data, sizeof(struct mxser_mon))) return -EFAULT; @@ -1951,6 +1959,7 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) { struct mxser_port *info = tty->driver_data; unsigned long orig_jiffies, char_time; + unsigned long flags; int lsr; if (info->type == PORT_UNKNOWN) @@ -1990,19 +1999,21 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) timeout, char_time); printk("jiff=%lu...", jiffies); #endif - lock_kernel(); + spin_lock_irqsave(&info->slock, flags); while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...", lsr, jiffies); #endif + spin_unlock_irqrestore(&info->slock, flags); schedule_timeout_interruptible(char_time); + spin_lock_irqsave(&info->slock, flags); if (signal_pending(current)) break; if (timeout && time_after(jiffies, orig_jiffies + timeout)) break; } + spin_unlock_irqrestore(&info->slock, flags); set_current_state(TASK_RUNNING); - unlock_kernel(); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); -- cgit v1.2.3 From 2493c0c166565e36831196446af594eb07892daf Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:46 +0000 Subject: tty: isicom: fix deadlock on shutdown Alexander Strakh reported KERNEL_VERSION: 2.6.31 DESCRIBE: Driver drivers/char/isicom.c might sleep in atomic context, because it calls tty_port_xmit_buf under spin_lock. ./drivers/char/isicom.c: 1307 static void isicom_hangup(struct tty_struct *tty) 1308 { ... 1315 spin_lock_irqsave(&port->card->card_lock, flags); 1316 isicom_shutdown_port(port); ... Path to might_sleep macro from isicom_hangup: 1. isicom_hangup calls spin_lock_irqsave (drivers/char/isicom.c:1315) and then calls isicom_shutdown_port. 2. isiscom_shutdown_port calls tty_port_free_xmit_buf at drivers/char/isicom.c:906 3. tty_port_free_xmit_buf calls mutex_lock at drivers/char/tty_port:48 Found by Linux Driver Verification Project. Reported-by: Alexander Strakh Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/isicom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 1e91c302ee4..300d5bd6cd0 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -887,7 +887,6 @@ static void isicom_shutdown_port(struct isi_port *port) { struct isi_board *card = port->card; - tty_port_free_xmit_buf(&port->port); if (--card->count < 0) { pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n", card->base, card->count); @@ -927,6 +926,7 @@ static void isicom_shutdown(struct tty_port *port) outw(card->port_status, card->base + 0x02); isicom_shutdown_port(ip); spin_unlock_irqrestore(&card->card_lock, flags); + tty_port_free_xmit_buf(port); } static void isicom_close(struct tty_struct *tty, struct file *filp) -- cgit v1.2.3 From f176178ba09d27cc33988435e2c9fe078b44998c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:51 +0000 Subject: tty: moxa: Use more tty_port ops Rework a few bits of this into tty_port format Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/moxa.c | 137 ++++++++-------------------------------------------- 1 file changed, 21 insertions(+), 116 deletions(-) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index dd0083bbb64..d8bcbed6d28 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -206,8 +206,9 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file, static void moxa_poll(unsigned long); static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); static void moxa_setup_empty_event(struct tty_struct *); -static void moxa_shut_down(struct tty_struct *); +static void moxa_shutdown(struct tty_port *); static int moxa_carrier_raised(struct tty_port *); +static void moxa_dtr_rts(struct tty_port *, int); /* * moxa board interface functions: */ @@ -409,6 +410,8 @@ static const struct tty_operations moxa_ops = { static const struct tty_port_operations moxa_port_ops = { .carrier_raised = moxa_carrier_raised, + .dtr_rts = moxa_dtr_rts, + .shutdown = moxa_shutdown, }; static struct tty_driver *moxaDriver; @@ -1112,14 +1115,12 @@ static void __exit moxa_exit(void) module_init(moxa_init); module_exit(moxa_exit); -static void moxa_close_port(struct tty_struct *tty) +static void moxa_shutdown(struct tty_port *port) { - struct moxa_port *ch = tty->driver_data; - moxa_shut_down(tty); + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortDisable(ch); MoxaPortFlushData(ch, 2); - ch->port.flags &= ~ASYNC_NORMAL_ACTIVE; - tty->driver_data = NULL; - tty_port_tty_set(&ch->port, NULL); + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); } static int moxa_carrier_raised(struct tty_port *port) @@ -1133,39 +1134,13 @@ static int moxa_carrier_raised(struct tty_port *port) return dcd; } -static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, - struct moxa_port *ch) +static void moxa_dtr_rts(struct tty_port *port, int onoff) { - struct tty_port *port = &ch->port; - DEFINE_WAIT(wait); - int retval = 0; - u8 dcd; - - while (1) { - prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp)) { -#ifdef SERIAL_DO_RESTART - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - dcd = tty_port_carrier_raised(port); - if (dcd) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - finish_wait(&port->open_wait, &wait); - - return retval; + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortLineCtrl(ch, onoff, onoff); } + static int moxa_open(struct tty_struct *tty, struct file *filp) { struct moxa_board_conf *brd; @@ -1194,6 +1169,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) ch->port.count++; tty->driver_data = ch; tty_port_tty_set(&ch->port, tty); + mutex_lock(&ch->port.mutex); if (!(ch->port.flags & ASYNC_INITIALIZED)) { ch->statusflags = 0; moxa_set_tty_param(tty, tty->termios); @@ -1202,57 +1178,21 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) MoxaSetFifo(ch, ch->type == PORT_16550A); ch->port.flags |= ASYNC_INITIALIZED; } + mutex_unlock(&ch->port.mutex); mutex_unlock(&moxa_openlock); - retval = 0; - if (!(filp->f_flags & O_NONBLOCK) && !C_CLOCAL(tty)) - retval = moxa_block_till_ready(tty, filp, ch); - mutex_lock(&moxa_openlock); - if (retval) { - if (ch->port.count) /* 0 means already hung up... */ - if (--ch->port.count == 0) - moxa_close_port(tty); - } else - ch->port.flags |= ASYNC_NORMAL_ACTIVE; - mutex_unlock(&moxa_openlock); - + retval = tty_port_block_til_ready(&ch->port, tty, filp); + if (retval == 0) + set_bit(ASYNCB_NORMAL_ACTIVE, &ch->port.flags); return retval; } static void moxa_close(struct tty_struct *tty, struct file *filp) { - struct moxa_port *ch; - int port; - - port = tty->index; - if (port == MAX_PORTS || tty_hung_up_p(filp)) - return; - - mutex_lock(&moxa_openlock); - ch = tty->driver_data; - if (ch == NULL) - goto unlock; - if (tty->count == 1 && ch->port.count != 1) { - printk(KERN_WARNING "moxa_close: bad serial port count; " - "tty->count is 1, ch->port.count is %d\n", ch->port.count); - ch->port.count = 1; - } - if (--ch->port.count < 0) { - printk(KERN_WARNING "moxa_close: bad serial port count, " - "device=%s\n", tty->name); - ch->port.count = 0; - } - if (ch->port.count) - goto unlock; - + struct moxa_port *ch = tty->driver_data; ch->cflag = tty->termios->c_cflag; - if (ch->port.flags & ASYNC_INITIALIZED) { - moxa_setup_empty_event(tty); - tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */ - } - - moxa_close_port(tty); -unlock: + mutex_lock(&moxa_openlock); + tty_port_close(&ch->port, tty, filp); mutex_unlock(&moxa_openlock); } @@ -1300,14 +1240,6 @@ static int moxa_chars_in_buffer(struct tty_struct *tty) struct moxa_port *ch = tty->driver_data; int chars; - /* - * Sigh...I have to check if driver_data is NULL here, because - * if an open() fails, the TTY subsystem eventually calls - * tty_wait_until_sent(), which calls the driver's chars_in_buffer() - * routine. And since the open() failed, we return 0 here. TDJ - */ - if (ch == NULL) - return 0; lock_kernel(); chars = MoxaPortTxQueue(ch); if (chars) { @@ -1436,15 +1368,8 @@ static void moxa_hangup(struct tty_struct *tty) mutex_lock(&moxa_openlock); ch = tty->driver_data; - if (ch == NULL) { - mutex_unlock(&moxa_openlock); - return; - } - ch->port.count = 0; - moxa_close_port(tty); + tty_port_hangup(&ch->port); mutex_unlock(&moxa_openlock); - - wake_up_interruptible(&ch->port.open_wait); } static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) @@ -1597,26 +1522,6 @@ static void moxa_setup_empty_event(struct tty_struct *tty) spin_unlock_bh(&moxa_lock); } -static void moxa_shut_down(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - if (!(ch->port.flags & ASYNC_INITIALIZED)) - return; - - MoxaPortDisable(ch); - - /* - * If we're a modem control device and HUPCL is on, drop RTS & DTR. - */ - if (C_HUPCL(tty)) - MoxaPortLineCtrl(ch, 0, 0); - - spin_lock_bh(&moxa_lock); - ch->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_bh(&moxa_lock); -} - /***************************************************************************** * Driver level functions: * *****************************************************************************/ -- cgit v1.2.3 From f5c5a36d27ae6d9e03c2f1b7890942bf84e92c5b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:17:57 +0000 Subject: tty: moxa: rework the locking a bit Introduce a lock for moxafunc() to protect the cases where were get collisions between two function requests at the same time. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/moxa.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index d8bcbed6d28..474d936d3b3 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -248,9 +248,25 @@ static void moxa_wait_finish(void __iomem *ofsAddr) static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg) { + unsigned long flags; + spin_lock_irqsave(&moxafunc_lock, flags); writew(arg, ofsAddr + FuncArg); writew(cmd, ofsAddr + FuncCode); moxa_wait_finish(ofsAddr); + spin_unlock_irqrestore(&moxafunc_lock, flags); +} + +static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg) +{ + unsigned long flags; + u16 ret; + spin_lock_irqsave(&moxafunc_lock, flags); + writew(arg, ofsAddr + FuncArg); + writew(cmd, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + ret = readw(ofsAddr + FuncArg); + spin_unlock_irqrestore(&moxafunc_lock, flags); + return ret; } static void moxa_low_water_check(void __iomem *ofsAddr) @@ -417,6 +433,7 @@ static const struct tty_port_operations moxa_port_ops = { static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); static DEFINE_SPINLOCK(moxa_lock); +static DEFINE_SPINLOCK(moxafunc_lock); /* * HW init @@ -1823,10 +1840,12 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio, baud = MoxaPortSetBaud(port, baud); if (termio->c_iflag & (IXON | IXOFF | IXANY)) { + spin_lock_irq(&moxafunc_lock); writeb(termio->c_cc[VSTART], ofsAddr + FuncArg); writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1); writeb(FC_SetXonXoff, ofsAddr + FuncCode); moxa_wait_finish(ofsAddr); + spin_unlock_irqrestore(&moxafunc_lock); } return baud; @@ -1879,12 +1898,10 @@ static int MoxaPortLineStatus(struct moxa_port *port) int val; ofsAddr = port->tableAddr; - if (MOXA_IS_320(port->board)) { - moxafunc(ofsAddr, FC_LineStatus, 0); - val = readw(ofsAddr + FuncArg); - } else { + if (MOXA_IS_320(port->board)) + val = moxafuncret(ofsAddr, FC_LineStatus, 0); + else val = readw(ofsAddr + FlagStat) >> 4; - } val &= 0x0B; if (val & 8) val |= 4; -- cgit v1.2.3 From a808ac0c4a2c5d81ba38a2a76d4ddc1de40d1539 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:02 +0000 Subject: tty: moxa: Locking clean up - The open lock is needed to fix up the case of a board reset occuring during tty open but too early for a sane hangup response. - The lock can however got for other cases - Use the port mutex for get/setserial - Fix up the confused lack of locking on the THROTTLE and other bits in the private flags. Just use set/test/clear bit and it covers the cases we need Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/moxa.c | 58 +++++++++++++++++++++++------------------------------ 1 file changed, 25 insertions(+), 33 deletions(-) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 474d936d3b3..7ab720f1f30 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -151,10 +151,10 @@ struct mon_str { }; /* statusflags */ -#define TXSTOPPED 0x1 -#define LOWWAIT 0x2 -#define EMPTYWAIT 0x4 -#define THROTTLE 0x8 +#define TXSTOPPED 1 +#define LOWWAIT 2 +#define EMPTYWAIT 3 +#define THROTTLE 4 #define SERIAL_DO_RESTART @@ -235,6 +235,8 @@ static void MoxaSetFifo(struct moxa_port *port, int enable); * I/O functions */ +static DEFINE_SPINLOCK(moxafunc_lock); + static void moxa_wait_finish(void __iomem *ofsAddr) { unsigned long end = jiffies + moxaFuncTout; @@ -381,14 +383,14 @@ copy: break; } case TIOCGSERIAL: - mutex_lock(&moxa_openlock); + mutex_lock(&ch->port.mutex); ret = moxa_get_serial_info(ch, argp); - mutex_unlock(&moxa_openlock); + mutex_unlock(&ch->port.mutex); break; case TIOCSSERIAL: - mutex_lock(&moxa_openlock); + mutex_lock(&ch->port.mutex); ret = moxa_set_serial_info(ch, argp); - mutex_unlock(&moxa_openlock); + mutex_unlock(&ch->port.mutex); break; default: ret = -ENOIOCTLCMD; @@ -433,7 +435,6 @@ static const struct tty_port_operations moxa_port_ops = { static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); static DEFINE_SPINLOCK(moxa_lock); -static DEFINE_SPINLOCK(moxafunc_lock); /* * HW init @@ -1208,9 +1209,7 @@ static void moxa_close(struct tty_struct *tty, struct file *filp) { struct moxa_port *ch = tty->driver_data; ch->cflag = tty->termios->c_cflag; - mutex_lock(&moxa_openlock); tty_port_close(&ch->port, tty, filp); - mutex_unlock(&moxa_openlock); } static int moxa_write(struct tty_struct *tty, @@ -1226,7 +1225,7 @@ static int moxa_write(struct tty_struct *tty, len = MoxaPortWriteData(tty, buf, count); spin_unlock_bh(&moxa_lock); - ch->statusflags |= LOWWAIT; + set_bit(LOWWAIT, &ch->statusflags); return len; } @@ -1264,7 +1263,7 @@ static int moxa_chars_in_buffer(struct tty_struct *tty) * Make it possible to wakeup anything waiting for output * in tty_ioctl.c, etc. */ - if (!(ch->statusflags & EMPTYWAIT)) + if (!test_bit(EMPTYWAIT, &ch->statusflags)) moxa_setup_empty_event(tty); } unlock_kernel(); @@ -1332,14 +1331,14 @@ static void moxa_throttle(struct tty_struct *tty) { struct moxa_port *ch = tty->driver_data; - ch->statusflags |= THROTTLE; + set_bit(THROTTLE, &ch->statusflags); } static void moxa_unthrottle(struct tty_struct *tty) { struct moxa_port *ch = tty->driver_data; - ch->statusflags &= ~THROTTLE; + clear_bit(THROTTLE, &ch->statusflags); } static void moxa_set_termios(struct tty_struct *tty, @@ -1361,7 +1360,7 @@ static void moxa_stop(struct tty_struct *tty) if (ch == NULL) return; MoxaPortTxDisable(ch); - ch->statusflags |= TXSTOPPED; + set_bit(TXSTOPPED, &ch->statusflags); } @@ -1376,17 +1375,13 @@ static void moxa_start(struct tty_struct *tty) return; MoxaPortTxEnable(ch); - ch->statusflags &= ~TXSTOPPED; + clear_bit(TXSTOPPED, &ch->statusflags); } static void moxa_hangup(struct tty_struct *tty) { - struct moxa_port *ch; - - mutex_lock(&moxa_openlock); - ch = tty->driver_data; + struct moxa_port *ch = tty->driver_data; tty_port_hangup(&ch->port); - mutex_unlock(&moxa_openlock); } static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) @@ -1412,24 +1407,24 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle, u16 intr; if (tty) { - if ((p->statusflags & EMPTYWAIT) && + if (test_bit(EMPTYWAIT, &p->statusflags) && MoxaPortTxQueue(p) == 0) { - p->statusflags &= ~EMPTYWAIT; + clear_bit(EMPTYWAIT, &p->statusflags); tty_wakeup(tty); } - if ((p->statusflags & LOWWAIT) && !tty->stopped && + if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped && MoxaPortTxQueue(p) <= WAKEUP_CHARS) { - p->statusflags &= ~LOWWAIT; + clear_bit(LOWWAIT, &p->statusflags); tty_wakeup(tty); } - if (inited && !(p->statusflags & THROTTLE) && + if (inited && !test_bit(THROTTLE, &p->statusflags) && MoxaPortRxQueue(p) > 0) { /* RX */ MoxaPortReadData(p); tty_schedule_flip(tty); } } else { - p->statusflags &= ~EMPTYWAIT; + clear_bit(EMPTYWAIT, &p->statusflags); MoxaPortFlushData(p, 0); /* flush RX */ } @@ -1533,10 +1528,7 @@ static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_term static void moxa_setup_empty_event(struct tty_struct *tty) { struct moxa_port *ch = tty->driver_data; - - spin_lock_bh(&moxa_lock); - ch->statusflags |= EMPTYWAIT; - spin_unlock_bh(&moxa_lock); + set_bit(EMPTYWAIT, &ch->statusflags); } /***************************************************************************** @@ -1845,7 +1837,7 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio, writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1); writeb(FC_SetXonXoff, ofsAddr + FuncCode); moxa_wait_finish(ofsAddr); - spin_unlock_irqrestore(&moxafunc_lock); + spin_unlock_irq(&moxafunc_lock); } return baud; -- cgit v1.2.3 From f9b412a8c9adb17d50922f91962e8b1e48789430 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:08 +0000 Subject: tty: moxa: Kill off the throttle method The tty flag can be tested so the shadow flag isn't needed Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/moxa.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 7ab720f1f30..d180aa965a5 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -154,7 +154,6 @@ struct mon_str { #define TXSTOPPED 1 #define LOWWAIT 2 #define EMPTYWAIT 3 -#define THROTTLE 4 #define SERIAL_DO_RESTART @@ -194,8 +193,6 @@ static int moxa_write(struct tty_struct *, const unsigned char *, int); static int moxa_write_room(struct tty_struct *); static void moxa_flush_buffer(struct tty_struct *); static int moxa_chars_in_buffer(struct tty_struct *); -static void moxa_throttle(struct tty_struct *); -static void moxa_unthrottle(struct tty_struct *); static void moxa_set_termios(struct tty_struct *, struct ktermios *); static void moxa_stop(struct tty_struct *); static void moxa_start(struct tty_struct *); @@ -415,8 +412,6 @@ static const struct tty_operations moxa_ops = { .flush_buffer = moxa_flush_buffer, .chars_in_buffer = moxa_chars_in_buffer, .ioctl = moxa_ioctl, - .throttle = moxa_throttle, - .unthrottle = moxa_unthrottle, .set_termios = moxa_set_termios, .stop = moxa_stop, .start = moxa_start, @@ -1327,20 +1322,6 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static void moxa_throttle(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - set_bit(THROTTLE, &ch->statusflags); -} - -static void moxa_unthrottle(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - clear_bit(THROTTLE, &ch->statusflags); -} - static void moxa_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { @@ -1418,7 +1399,7 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle, tty_wakeup(tty); } - if (inited && !test_bit(THROTTLE, &p->statusflags) && + if (inited && !test_bit(TTY_THROTTLED, &tty->flags) && MoxaPortRxQueue(p) > 0) { /* RX */ MoxaPortReadData(p); tty_schedule_flip(tty); -- cgit v1.2.3 From 8482bcd58530ad5857d7187854132f2b846db681 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:13 +0000 Subject: tty: moxa: Fix modem op locking This is overkill and mostly not needed Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/moxa.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index d180aa965a5..ac06d0131db 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -139,7 +139,7 @@ struct moxa_port { int cflag; unsigned long statusflags; - u8 DCDState; + u8 DCDState; /* Protected by the port lock */ u8 lineCtrl; u8 lowChkFlag; }; @@ -1141,9 +1141,9 @@ static int moxa_carrier_raised(struct tty_port *port) struct moxa_port *ch = container_of(port, struct moxa_port, port); int dcd; - spin_lock_bh(&moxa_lock); + spin_lock_irq(&port->lock); dcd = ch->DCDState; - spin_unlock_bh(&moxa_lock); + spin_unlock_irq(&port->lock); return dcd; } @@ -1267,16 +1267,9 @@ static int moxa_chars_in_buffer(struct tty_struct *tty) static int moxa_tiocmget(struct tty_struct *tty, struct file *file) { - struct moxa_port *ch; + struct moxa_port *ch = tty->driver_data; int flag = 0, dtr, rts; - mutex_lock(&moxa_openlock); - ch = tty->driver_data; - if (!ch) { - mutex_unlock(&moxa_openlock); - return -EINVAL; - } - MoxaPortGetLineOut(ch, &dtr, &rts); if (dtr) flag |= TIOCM_DTR; @@ -1289,7 +1282,6 @@ static int moxa_tiocmget(struct tty_struct *tty, struct file *file) flag |= TIOCM_DSR; if (dtr & 4) flag |= TIOCM_CD; - mutex_unlock(&moxa_openlock); return flag; } @@ -1368,15 +1360,20 @@ static void moxa_hangup(struct tty_struct *tty) static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) { struct tty_struct *tty; + unsigned long flags; dcd = !!dcd; + spin_lock_irqsave(&p->port.lock, flags); if (dcd != p->DCDState) { + p->DCDState = dcd; + spin_unlock_irqrestore(&p->port.lock, flags); tty = tty_port_tty_get(&p->port); if (tty && C_CLOCAL(tty) && !dcd) tty_hangup(tty); tty_kref_put(tty); } - p->DCDState = dcd; + else + spin_unlock_irqrestore(&p->port.lock, flags); } static int moxa_poll_port(struct moxa_port *p, unsigned int handle, @@ -1878,9 +1875,7 @@ static int MoxaPortLineStatus(struct moxa_port *port) val &= 0x0B; if (val & 8) val |= 4; - spin_lock_bh(&moxa_lock); moxa_new_dcdstate(port, val & 8); - spin_unlock_bh(&moxa_lock); val &= 7; return val; } -- cgit v1.2.3 From f710ebd7f70801e31751f2c49fe4b92a477d24eb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:18 +0000 Subject: tty: moxa: Kill the use of lock_kernel It isn't needed here any more Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/moxa.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index ac06d0131db..d53fac5229b 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include @@ -202,7 +201,6 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static void moxa_poll(unsigned long); static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); -static void moxa_setup_empty_event(struct tty_struct *); static void moxa_shutdown(struct tty_port *); static int moxa_carrier_raised(struct tty_port *); static void moxa_dtr_rts(struct tty_port *, int); @@ -1251,17 +1249,13 @@ static int moxa_chars_in_buffer(struct tty_struct *tty) struct moxa_port *ch = tty->driver_data; int chars; - lock_kernel(); chars = MoxaPortTxQueue(ch); - if (chars) { + if (chars) /* * Make it possible to wakeup anything waiting for output * in tty_ioctl.c, etc. */ - if (!test_bit(EMPTYWAIT, &ch->statusflags)) - moxa_setup_empty_event(tty); - } - unlock_kernel(); + set_bit(EMPTYWAIT, &ch->statusflags); return chars; } @@ -1503,12 +1497,6 @@ static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_term tty_encode_baud_rate(tty, baud, baud); } -static void moxa_setup_empty_event(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - set_bit(EMPTYWAIT, &ch->statusflags); -} - /***************************************************************************** * Driver level functions: * *****************************************************************************/ -- cgit v1.2.3 From e8c62103fd5fecc8d2086bae244b32d089892175 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:24 +0000 Subject: tty: moxa: split open lock moxa_openlock is used for several situations where we want to handle the case of an ioctl that crosses many ports (not just the open tty), and also cases where an open races a deinit (eg a pci unplug) and we hangup a port before we can cope with that. The non open race cases can use the moxa_lock spinlock. This simplifies sorting out the remaining mess. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/moxa.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index d53fac5229b..63ee3bbc1ce 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -163,6 +163,7 @@ static struct mon_str moxaLog; static unsigned int moxaFuncTout = HZ / 2; static unsigned int moxaLowWaterChk; static DEFINE_MUTEX(moxa_openlock); +static DEFINE_SPINLOCK(moxa_lock); /* Variables for insmod */ #ifdef MODULE static unsigned long baseaddr[MAX_BOARDS]; @@ -313,22 +314,20 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file, struct moxa_port *p; unsigned int i, j; - mutex_lock(&moxa_openlock); for (i = 0; i < MAX_BOARDS; i++) { p = moxa_boards[i].ports; for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { memset(&tmp, 0, sizeof(tmp)); + spin_lock_bh(&moxa_lock); if (moxa_boards[i].ready) { tmp.inq = MoxaPortRxQueue(p); tmp.outq = MoxaPortTxQueue(p); } - if (copy_to_user(argm, &tmp, sizeof(tmp))) { - mutex_unlock(&moxa_openlock); + spin_unlock_bh(&moxa_lock); + if (copy_to_user(argm, &tmp, sizeof(tmp))) return -EFAULT; - } } } - mutex_unlock(&moxa_openlock); break; } case MOXA_GET_OQUEUE: status = MoxaPortTxQueue(ch); @@ -344,16 +343,20 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file, struct moxa_port *p; unsigned int i, j; - mutex_lock(&moxa_openlock); for (i = 0; i < MAX_BOARDS; i++) { p = moxa_boards[i].ports; for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { struct tty_struct *ttyp; memset(&tmp, 0, sizeof(tmp)); - if (!moxa_boards[i].ready) + spin_lock_bh(&moxa_lock); + if (!moxa_boards[i].ready) { + spin_unlock_bh(&moxa_lock); goto copy; + } status = MoxaPortLineStatus(p); + spin_unlock_bh(&moxa_lock); + if (status & 1) tmp.cts = 1; if (status & 2) @@ -368,13 +371,10 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file, tmp.cflag = ttyp->termios->c_cflag; tty_kref_put(tty); copy: - if (copy_to_user(argm, &tmp, sizeof(tmp))) { - mutex_unlock(&moxa_openlock); + if (copy_to_user(argm, &tmp, sizeof(tmp))) return -EFAULT; - } } } - mutex_unlock(&moxa_openlock); break; } case TIOCGSERIAL: @@ -427,7 +427,6 @@ static const struct tty_port_operations moxa_port_ops = { static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); -static DEFINE_SPINLOCK(moxa_lock); /* * HW init -- cgit v1.2.3 From eeb89d918c2fa2b809e464136bbafdaec2aacb30 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:29 +0000 Subject: tty: push the BKL down into the handlers a bit Start trying to untangle the remaining BKL mess Updated to fix missing unlock_kernel noted by Dan Carpenter Signed-off-by: Alan "I must be out of my tree" Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/pty.c | 2 +- drivers/char/tty_io.c | 141 +++++++++++++++++++++++++++-------------------- drivers/char/tty_ldisc.c | 13 +++++ include/linux/tty.h | 2 +- 4 files changed, 95 insertions(+), 63 deletions(-) diff --git a/drivers/char/pty.c b/drivers/char/pty.c index d86c0bc05c1..385c44b3034 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -659,7 +659,7 @@ static int __ptmx_open(struct inode *inode, struct file *filp) if (!retval) return 0; out1: - tty_release_dev(filp); + tty_release(inode, filp); return retval; out: devpts_kill_index(inode, index); diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 59499ee0fe6..1e241309361 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -142,7 +142,6 @@ ssize_t redirected_tty_write(struct file *, const char __user *, size_t, loff_t *); static unsigned int tty_poll(struct file *, poll_table *); static int tty_open(struct inode *, struct file *); -static int tty_release(struct inode *, struct file *); long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); #ifdef CONFIG_COMPAT static long tty_compat_ioctl(struct file *file, unsigned int cmd, @@ -1017,14 +1016,16 @@ out: void tty_write_message(struct tty_struct *tty, char *msg) { - lock_kernel(); if (tty) { mutex_lock(&tty->atomic_write_lock); - if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) + lock_kernel(); + if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) { + unlock_kernel(); tty->ops->write(tty, msg, strlen(msg)); + } else + unlock_kernel(); tty_write_unlock(tty); } - unlock_kernel(); return; } @@ -1202,14 +1203,21 @@ static int tty_driver_install_tty(struct tty_driver *driver, struct tty_struct *tty) { int idx = tty->index; + int ret; - if (driver->ops->install) - return driver->ops->install(driver, tty); + if (driver->ops->install) { + lock_kernel(); + ret = driver->ops->install(driver, tty); + unlock_kernel(); + return ret; + } if (tty_init_termios(tty) == 0) { + lock_kernel(); tty_driver_kref_get(driver); tty->count++; driver->ttys[idx] = tty; + unlock_kernel(); return 0; } return -ENOMEM; @@ -1302,10 +1310,14 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, struct tty_struct *tty; int retval; + lock_kernel(); /* Check if pty master is being opened multiple times */ if (driver->subtype == PTY_TYPE_MASTER && - (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) + (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) { + unlock_kernel(); return ERR_PTR(-EIO); + } + unlock_kernel(); /* * First time open is complex, especially for PTY devices. @@ -1335,8 +1347,9 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, * If we fail here just call release_tty to clean up. No need * to decrement the use counts, as release_tty doesn't care. */ - + lock_kernel(); retval = tty_ldisc_setup(tty, tty->link); + unlock_kernel(); if (retval) goto release_mem_out; return tty; @@ -1350,7 +1363,9 @@ release_mem_out: if (printk_ratelimit()) printk(KERN_INFO "tty_init_dev: ldisc open failed, " "clearing slot %d\n", idx); + lock_kernel(); release_tty(tty, idx); + unlock_kernel(); return ERR_PTR(retval); } @@ -1464,7 +1479,17 @@ static void release_tty(struct tty_struct *tty, int idx) tty_kref_put(tty); } -/* +/** + * tty_release - vfs callback for close + * @inode: inode of tty + * @filp: file pointer for handle to tty + * + * Called the last time each file handle is closed that references + * this tty. There may however be several such references. + * + * Locking: + * Takes bkl. See tty_release_dev + * * Even releasing the tty structures is a tricky business.. We have * to be very careful that the structures are all released at the * same time, as interrupts might otherwise get the wrong pointers. @@ -1472,20 +1497,20 @@ static void release_tty(struct tty_struct *tty, int idx) * WSH 09/09/97: rewritten to avoid some nasty race conditions that could * lead to double frees or releasing memory still in use. */ -void tty_release_dev(struct file *filp) + +int tty_release(struct inode *inode, struct file *filp) { struct tty_struct *tty, *o_tty; int pty_master, tty_closing, o_tty_closing, do_sleep; int devpts; int idx; char buf[64]; - struct inode *inode; - inode = filp->f_path.dentry->d_inode; tty = (struct tty_struct *)filp->private_data; if (tty_paranoia_check(tty, inode, "tty_release_dev")) - return; + return 0; + lock_kernel(); check_tty_count(tty, "tty_release_dev"); tty_fasync(-1, filp, 0); @@ -1500,19 +1525,22 @@ void tty_release_dev(struct file *filp) if (idx < 0 || idx >= tty->driver->num) { printk(KERN_DEBUG "tty_release_dev: bad idx when trying to " "free (%s)\n", tty->name); - return; + unlock_kernel(); + return 0; } if (!devpts) { if (tty != tty->driver->ttys[idx]) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty " "for (%s)\n", idx, tty->name); - return; + return 0; } if (tty->termios != tty->driver->termios[idx]) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios " "for (%s)\n", idx, tty->name); - return; + return 0; } } #endif @@ -1526,26 +1554,30 @@ void tty_release_dev(struct file *filp) if (tty->driver->other && !(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) { if (o_tty != tty->driver->other->ttys[idx]) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: other->table[%d] " "not o_tty for (%s)\n", idx, tty->name); - return; + return 0 ; } if (o_tty->termios != tty->driver->other->termios[idx]) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: other->termios[%d] " "not o_termios for (%s)\n", idx, tty->name); - return; + return 0; } if (o_tty->link != tty) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n"); - return; + return 0; } } #endif if (tty->ops->close) tty->ops->close(tty, filp); + unlock_kernel(); /* * Sanity check: if tty->count is going to zero, there shouldn't be * any waiters on tty->read_wait or tty->write_wait. We test the @@ -1568,6 +1600,7 @@ void tty_release_dev(struct file *filp) opens on /dev/tty */ mutex_lock(&tty_mutex); + lock_kernel(); tty_closing = tty->count <= 1; o_tty_closing = o_tty && (o_tty->count <= (pty_master ? 1 : 0)); @@ -1598,6 +1631,7 @@ void tty_release_dev(struct file *filp) printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue " "active!\n", tty_name(tty, buf)); + unlock_kernel(); mutex_unlock(&tty_mutex); schedule(); } @@ -1661,8 +1695,10 @@ void tty_release_dev(struct file *filp) mutex_unlock(&tty_mutex); /* check whether both sides are closing ... */ - if (!tty_closing || (o_tty && !o_tty_closing)) - return; + if (!tty_closing || (o_tty && !o_tty_closing)) { + unlock_kernel(); + return 0; + } #ifdef TTY_DEBUG_HANGUP printk(KERN_DEBUG "freeing tty structure..."); @@ -1680,10 +1716,12 @@ void tty_release_dev(struct file *filp) /* Make this pty number available for reallocation */ if (devpts) devpts_kill_index(inode, idx); + unlock_kernel(); + return 0; } /** - * __tty_open - open a tty device + * tty_open - open a tty device * @inode: inode of device file * @filp: file pointer to tty * @@ -1703,7 +1741,7 @@ void tty_release_dev(struct file *filp) * ->siglock protects ->signal/->sighand */ -static int __tty_open(struct inode *inode, struct file *filp) +static int tty_open(struct inode *inode, struct file *filp) { struct tty_struct *tty = NULL; int noctty, retval; @@ -1720,10 +1758,12 @@ retry_open: retval = 0; mutex_lock(&tty_mutex); + lock_kernel(); if (device == MKDEV(TTYAUX_MAJOR, 0)) { tty = get_current_tty(); if (!tty) { + unlock_kernel(); mutex_unlock(&tty_mutex); return -ENXIO; } @@ -1755,12 +1795,14 @@ retry_open: goto got_driver; } } + unlock_kernel(); mutex_unlock(&tty_mutex); return -ENODEV; } driver = get_tty_driver(device, &index); if (!driver) { + unlock_kernel(); mutex_unlock(&tty_mutex); return -ENODEV; } @@ -1770,6 +1812,7 @@ got_driver: tty = tty_driver_lookup_tty(driver, inode, index); if (IS_ERR(tty)) { + unlock_kernel(); mutex_unlock(&tty_mutex); return PTR_ERR(tty); } @@ -1784,8 +1827,10 @@ got_driver: mutex_unlock(&tty_mutex); tty_driver_kref_put(driver); - if (IS_ERR(tty)) + if (IS_ERR(tty)) { + unlock_kernel(); return PTR_ERR(tty); + } filp->private_data = tty; file_move(filp, &tty->tty_files); @@ -1813,11 +1858,15 @@ got_driver: printk(KERN_DEBUG "error %d in opening %s...", retval, tty->name); #endif - tty_release_dev(filp); - if (retval != -ERESTARTSYS) + tty_release(inode, filp); + if (retval != -ERESTARTSYS) { + unlock_kernel(); return retval; - if (signal_pending(current)) + } + if (signal_pending(current)) { + unlock_kernel(); return retval; + } schedule(); /* * Need to reset f_op in case a hangup happened. @@ -1826,8 +1875,11 @@ got_driver: filp->f_op = &tty_fops; goto retry_open; } + unlock_kernel(); + mutex_lock(&tty_mutex); + lock_kernel(); spin_lock_irq(¤t->sighand->siglock); if (!noctty && current->signal->leader && @@ -1835,44 +1887,13 @@ got_driver: tty->session == NULL) __proc_set_tty(current, tty); spin_unlock_irq(¤t->sighand->siglock); + unlock_kernel(); mutex_unlock(&tty_mutex); return 0; } -/* BKL pushdown: scary code avoidance wrapper */ -static int tty_open(struct inode *inode, struct file *filp) -{ - int ret; - - lock_kernel(); - ret = __tty_open(inode, filp); - unlock_kernel(); - return ret; -} - - -/** - * tty_release - vfs callback for close - * @inode: inode of tty - * @filp: file pointer for handle to tty - * - * Called the last time each file handle is closed that references - * this tty. There may however be several such references. - * - * Locking: - * Takes bkl. See tty_release_dev - */ - -static int tty_release(struct inode *inode, struct file *filp) -{ - lock_kernel(); - tty_release_dev(filp); - unlock_kernel(); - return 0; -} - /** * tty_poll - check tty status * @filp: file being polled @@ -2317,9 +2338,7 @@ static int tiocsetd(struct tty_struct *tty, int __user *p) if (get_user(ldisc, p)) return -EFAULT; - lock_kernel(); ret = tty_set_ldisc(tty, ldisc); - unlock_kernel(); return ret; } diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index feb55075819..d914e77f7f0 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -34,6 +34,8 @@ #include #include +#include /* For the moment */ + #include #include @@ -545,6 +547,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (IS_ERR(new_ldisc)) return PTR_ERR(new_ldisc); + lock_kernel(); /* * We need to look at the tty locking here for pty/tty pairs * when both sides try to change in parallel. @@ -558,6 +561,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) */ if (tty->ldisc->ops->num == ldisc) { + unlock_kernel(); tty_ldisc_put(new_ldisc); return 0; } @@ -569,6 +573,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_wait_until_sent(tty, 0); + unlock_kernel(); mutex_lock(&tty->ldisc_mutex); /* @@ -582,6 +587,9 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); mutex_lock(&tty->ldisc_mutex); } + + lock_kernel(); + set_bit(TTY_LDISC_CHANGING, &tty->flags); /* @@ -592,6 +600,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty->receive_room = 0; o_ldisc = tty->ldisc; + + unlock_kernel(); /* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit @@ -617,12 +627,14 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) flush_scheduled_work(); mutex_lock(&tty->ldisc_mutex); + lock_kernel(); if (test_bit(TTY_HUPPED, &tty->flags)) { /* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ clear_bit(TTY_LDISC_CHANGING, &tty->flags); mutex_unlock(&tty->ldisc_mutex); tty_ldisc_put(new_ldisc); + unlock_kernel(); return -EIO; } @@ -664,6 +676,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (o_work) schedule_delayed_work(&o_tty->buf.work, 1); mutex_unlock(&tty->ldisc_mutex); + unlock_kernel(); return retval; } diff --git a/include/linux/tty.h b/include/linux/tty.h index e6da667ba34..405a9035fe4 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -449,7 +449,7 @@ extern void initialize_tty_struct(struct tty_struct *tty, struct tty_driver *driver, int idx); extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, int first_ok); -extern void tty_release_dev(struct file *filp); +extern int tty_release(struct inode *inode, struct file *filp); extern int tty_init_termios(struct tty_struct *tty); extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty); -- cgit v1.2.3 From f18f9498e90327b9b0e245e191029e6e1996d203 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:35 +0000 Subject: tty: Push the lock down further into the ldisc code Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_io.c | 2 -- drivers/char/tty_ldisc.c | 12 +++++++++--- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 1e241309361..c408c81c06a 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1347,9 +1347,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, * If we fail here just call release_tty to clean up. No need * to decrement the use counts, as release_tty doesn't care. */ - lock_kernel(); retval = tty_ldisc_setup(tty, tty->link); - unlock_kernel(); if (retval) goto release_mem_out; return tty; diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index d914e77f7f0..3f653f7d849 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -445,8 +445,14 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) { WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags)); - if (ld->ops->open) - return ld->ops->open(tty); + if (ld->ops->open) { + int ret; + /* BKL here locks verus a hangup event */ + lock_kernel(); + ret = ld->ops->open(tty); + unlock_kernel(); + return ret; + } return 0; } @@ -566,6 +572,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) return 0; } + unlock_kernel(); /* * Problem: What do we do if this blocks ? * We could deadlock here @@ -573,7 +580,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_wait_until_sent(tty, 0); - unlock_kernel(); mutex_lock(&tty->ldisc_mutex); /* -- cgit v1.2.3 From 38c70b27f9502c31c1d0c29676275f7362cdb0d9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:40 +0000 Subject: tty: Push the bkl down a bit in the hangup code We know that the redirect field is handled via its own locking in all places Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index c408c81c06a..cc941a3504d 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -505,8 +505,6 @@ static void do_tty_hangup(struct work_struct *work) if (!tty) return; - /* inuse_filps is protected by the single kernel lock */ - lock_kernel(); spin_lock(&redirect_lock); if (redirect && redirect->private_data == tty) { @@ -515,6 +513,8 @@ static void do_tty_hangup(struct work_struct *work) } spin_unlock(&redirect_lock); + /* inuse_filps is protected by the single kernel lock */ + lock_kernel(); check_tty_count(tty, "do_tty_hangup"); file_list_lock(); /* This breaks for file handles being sent over AF_UNIX sockets ? */ -- cgit v1.2.3 From 5ec93d1154fd1e269162398f8e70efc7e004485d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:45 +0000 Subject: tty: Move the leader test in disassociate There are two call points, both want to check that tty->signal->leader is set. Move the test into disassociate_ctty() as that will make locking changes easier in a bit Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_io.c | 5 +++-- kernel/exit.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index cc941a3504d..a19fef2093f 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -707,6 +707,8 @@ void disassociate_ctty(int on_exit) struct tty_struct *tty; struct pid *tty_pgrp = NULL; + if (!current->signal->leader) + return; tty = get_current_tty(); if (tty) { @@ -772,8 +774,7 @@ void no_tty(void) { struct task_struct *tsk = current; lock_kernel(); - if (tsk->signal->leader) - disassociate_ctty(0); + disassociate_ctty(0); unlock_kernel(); proc_clear_tty(tsk); } diff --git a/kernel/exit.c b/kernel/exit.c index 1143012951e..6f50ef55a6f 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -971,7 +971,7 @@ NORET_TYPE void do_exit(long code) exit_thread(); cgroup_exit(tsk, 1); - if (group_dead && tsk->signal->leader) + if (group_dead) disassociate_ctty(1); module_put(task_thread_info(tsk)->exec_domain->module); -- cgit v1.2.3 From 36ba782e9674cdc29ec7003757df0b375e99fa96 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:18:51 +0000 Subject: tty: split the lock up a bit further The tty count sanity check may need the BKL, that isn't clear. However it is clear that the count use of the lock is internal and independant of the bigger use of the lock. Furthermore the file list locking is also separately locked already Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_io.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index a19fef2093f..684f0e0b175 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -516,6 +516,8 @@ static void do_tty_hangup(struct work_struct *work) /* inuse_filps is protected by the single kernel lock */ lock_kernel(); check_tty_count(tty, "do_tty_hangup"); + unlock_kernel(); + file_list_lock(); /* This breaks for file handles being sent over AF_UNIX sockets ? */ list_for_each_entry(filp, &tty->tty_files, f_u.fu_list) { @@ -529,6 +531,7 @@ static void do_tty_hangup(struct work_struct *work) } file_list_unlock(); + lock_kernel(); tty_ldisc_hangup(tty); read_lock(&tasklist_lock); -- cgit v1.2.3