From 1c5b9069e12e20d2fe883076ae0bf73966492108 Mon Sep 17 00:00:00 2001 From: Brian Gerst Date: Fri, 5 Feb 2010 09:37:09 -0500 Subject: x86: Merge io.h io_32.h and io_64.h are now identical. Merge them into io.h. Signed-off-by: Brian Gerst LKML-Reference: <1265380629-3212-8-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/io.h | 155 ++++++++++++++++++++++++++++++++++++++++- arch/x86/include/asm/io_32.h | 161 ------------------------------------------- arch/x86/include/asm/io_64.h | 161 ------------------------------------------- 3 files changed, 152 insertions(+), 325 deletions(-) delete mode 100644 arch/x86/include/asm/io_32.h delete mode 100644 arch/x86/include/asm/io_64.h diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 73739322b6d..a1dcfa3ab17 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -1,8 +1,42 @@ #ifndef _ASM_X86_IO_H #define _ASM_X86_IO_H +/* + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + */ + + /* + * Bit simplified and optimized by Jan Hubicka + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. + * + * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, + * isa_read[wl] and isa_write[wl] fixed + * - Arnaldo Carvalho de Melo + */ + #define ARCH_HAS_IOREMAP_WC +#include #include #include #include @@ -173,11 +207,126 @@ static inline void __iomem *ioremap(resource_size_t offset, unsigned long size) extern void iounmap(volatile void __iomem *addr); -#ifdef CONFIG_X86_32 -# include "io_32.h" +#ifdef __KERNEL__ + +#include + +#include + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +static inline void +memset_io(volatile void __iomem *addr, unsigned char val, size_t count) +{ + memset((void __force *)addr, val, count); +} + +static inline void +memcpy_fromio(void *dst, const volatile void __iomem *src, size_t count) +{ + memcpy(dst, (const void __force *)src, count); +} + +static inline void +memcpy_toio(volatile void __iomem *dst, const void *src, size_t count) +{ + memcpy((void __force *)dst, src, count); +} + +/* + * ISA space is 'always mapped' on a typical x86 system, no need to + * explicitly ioremap() it. The fact that the ISA IO space is mapped + * to PAGE_OFFSET is pure coincidence - it does not mean ISA values + * are physical addresses. The following constant pointer can be + * used as the IO-area pointer (it can be iounmapped as well, so the + * analogy with PCI is quite large): + */ +#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) + +/* + * Cache management + * + * This needed for two cases + * 1. Out of order aware processors + * 2. Accidentally out of order processors (PPro errata #51) + */ + +static inline void flush_write_buffers(void) +{ +#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) + asm volatile("lock; addl $0,0(%%esp)": : :"memory"); +#endif +} + +#endif /* __KERNEL__ */ + +extern void native_io_delay(void); + +extern int io_delay_type; +extern void io_delay_init(void); + +#if defined(CONFIG_PARAVIRT) +#include #else -# include "io_64.h" + +static inline void slow_down_io(void) +{ + native_io_delay(); +#ifdef REALLY_SLOW_IO + native_io_delay(); + native_io_delay(); + native_io_delay(); #endif +} + +#endif + +#define BUILDIO(bwl, bw, type) \ +static inline void out##bwl(unsigned type value, int port) \ +{ \ + asm volatile("out" #bwl " %" #bw "0, %w1" \ + : : "a"(value), "Nd"(port)); \ +} \ + \ +static inline unsigned type in##bwl(int port) \ +{ \ + unsigned type value; \ + asm volatile("in" #bwl " %w1, %" #bw "0" \ + : "=a"(value) : "Nd"(port)); \ + return value; \ +} \ + \ +static inline void out##bwl##_p(unsigned type value, int port) \ +{ \ + out##bwl(value, port); \ + slow_down_io(); \ +} \ + \ +static inline unsigned type in##bwl##_p(int port) \ +{ \ + unsigned type value = in##bwl(port); \ + slow_down_io(); \ + return value; \ +} \ + \ +static inline void outs##bwl(int port, const void *addr, unsigned long count) \ +{ \ + asm volatile("rep; outs" #bwl \ + : "+S"(addr), "+c"(count) : "d"(port)); \ +} \ + \ +static inline void ins##bwl(int port, void *addr, unsigned long count) \ +{ \ + asm volatile("rep; ins" #bwl \ + : "+D"(addr), "+c"(count) : "d"(port)); \ +} + +BUILDIO(b, b, char) +BUILDIO(w, w, short) +BUILDIO(l, , int) extern void *xlate_dev_mem_ptr(unsigned long phys); extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr); diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h deleted file mode 100644 index e8177f3b87f..00000000000 --- a/arch/x86/include/asm/io_32.h +++ /dev/null @@ -1,161 +0,0 @@ -#ifndef _ASM_X86_IO_32_H -#define _ASM_X86_IO_32_H - -#include -#include - -/* - * This file contains the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated - * to (a) handle it all in a way that makes gcc able to optimize it - * as well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - */ - -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - */ - - /* - * Bit simplified and optimized by Jan Hubicka - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. - * - * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, - * isa_read[wl] and isa_write[wl] fixed - * - Arnaldo Carvalho de Melo - */ - -#ifdef __KERNEL__ - -#include - -#include - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -static inline void -memset_io(volatile void __iomem *addr, unsigned char val, size_t count) -{ - memset((void __force *)addr, val, count); -} - -static inline void -memcpy_fromio(void *dst, const volatile void __iomem *src, size_t count) -{ - memcpy(dst, (const void __force *)src, count); -} - -static inline void -memcpy_toio(volatile void __iomem *dst, const void *src, size_t count) -{ - memcpy((void __force *)dst, src, count); -} - -/* - * ISA space is 'always mapped' on a typical x86 system, no need to - * explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) - -/* - * Cache management - * - * This needed for two cases - * 1. Out of order aware processors - * 2. Accidentally out of order processors (PPro errata #51) - */ - -static inline void flush_write_buffers(void) -{ -#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) - asm volatile("lock; addl $0,0(%%esp)": : :"memory"); -#endif -} - -#endif /* __KERNEL__ */ - -extern void native_io_delay(void); - -extern int io_delay_type; -extern void io_delay_init(void); - -#if defined(CONFIG_PARAVIRT) -#include -#else - -static inline void slow_down_io(void) -{ - native_io_delay(); -#ifdef REALLY_SLOW_IO - native_io_delay(); - native_io_delay(); - native_io_delay(); -#endif -} - -#endif - -#define BUILDIO(bwl, bw, type) \ -static inline void out##bwl(unsigned type value, int port) \ -{ \ - asm volatile("out" #bwl " %" #bw "0, %w1" \ - : : "a"(value), "Nd"(port)); \ -} \ - \ -static inline unsigned type in##bwl(int port) \ -{ \ - unsigned type value; \ - asm volatile("in" #bwl " %w1, %" #bw "0" \ - : "=a"(value) : "Nd"(port)); \ - return value; \ -} \ - \ -static inline void out##bwl##_p(unsigned type value, int port) \ -{ \ - out##bwl(value, port); \ - slow_down_io(); \ -} \ - \ -static inline unsigned type in##bwl##_p(int port) \ -{ \ - unsigned type value = in##bwl(port); \ - slow_down_io(); \ - return value; \ -} \ - \ -static inline void outs##bwl(int port, const void *addr, unsigned long count) \ -{ \ - asm volatile("rep; outs" #bwl \ - : "+S"(addr), "+c"(count) : "d"(port)); \ -} \ - \ -static inline void ins##bwl(int port, void *addr, unsigned long count) \ -{ \ - asm volatile("rep; ins" #bwl \ - : "+D"(addr), "+c"(count) : "d"(port)); \ -} - -BUILDIO(b, b, char) -BUILDIO(w, w, short) -BUILDIO(l, , int) - -#endif /* _ASM_X86_IO_32_H */ diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h deleted file mode 100644 index 6964a1c366d..00000000000 --- a/arch/x86/include/asm/io_64.h +++ /dev/null @@ -1,161 +0,0 @@ -#ifndef _ASM_X86_IO_64_H -#define _ASM_X86_IO_64_H - -#include -#include - -/* - * This file contains the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated - * to (a) handle it all in a way that makes gcc able to optimize it - * as well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - */ - -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - */ - - /* - * Bit simplified and optimized by Jan Hubicka - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. - * - * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, - * isa_read[wl] and isa_write[wl] fixed - * - Arnaldo Carvalho de Melo - */ - -#ifdef __KERNEL__ - -#include - -#include - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -static inline void -memset_io(volatile void __iomem *addr, unsigned char val, size_t count) -{ - memset((void __force *)addr, val, count); -} - -static inline void -memcpy_fromio(void *dst, const volatile void __iomem *src, size_t count) -{ - memcpy(dst, (const void __force *)src, count); -} - -static inline void -memcpy_toio(volatile void __iomem *dst, const void *src, size_t count) -{ - memcpy((void __force *)dst, src, count); -} - -/* - * ISA space is 'always mapped' on a typical x86 system, no need to - * explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) - -/* - * Cache management - * - * This needed for two cases - * 1. Out of order aware processors - * 2. Accidentally out of order processors (PPro errata #51) - */ - -static inline void flush_write_buffers(void) -{ -#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) - asm volatile("lock; addl $0,0(%%esp)": : :"memory"); -#endif -} - -#endif /* __KERNEL__ */ - -extern void native_io_delay(void); - -extern int io_delay_type; -extern void io_delay_init(void); - -#if defined(CONFIG_PARAVIRT) -#include -#else - -static inline void slow_down_io(void) -{ - native_io_delay(); -#ifdef REALLY_SLOW_IO - native_io_delay(); - native_io_delay(); - native_io_delay(); -#endif -} - -#endif - -#define BUILDIO(bwl, bw, type) \ -static inline void out##bwl(unsigned type value, int port) \ -{ \ - asm volatile("out" #bwl " %" #bw "0, %w1" \ - : : "a"(value), "Nd"(port)); \ -} \ - \ -static inline unsigned type in##bwl(int port) \ -{ \ - unsigned type value; \ - asm volatile("in" #bwl " %w1, %" #bw "0" \ - : "=a"(value) : "Nd"(port)); \ - return value; \ -} \ - \ -static inline void out##bwl##_p(unsigned type value, int port) \ -{ \ - out##bwl(value, port); \ - slow_down_io(); \ -} \ - \ -static inline unsigned type in##bwl##_p(int port) \ -{ \ - unsigned type value = in##bwl(port); \ - slow_down_io(); \ - return value; \ -} \ - \ -static inline void outs##bwl(int port, const void *addr, unsigned long count) \ -{ \ - asm volatile("rep; outs" #bwl \ - : "+S"(addr), "+c"(count) : "d"(port)); \ -} \ - \ -static inline void ins##bwl(int port, void *addr, unsigned long count) \ -{ \ - asm volatile("rep; ins" #bwl \ - : "+D"(addr), "+c"(count) : "d"(port)); \ -} - -BUILDIO(b, b, char) -BUILDIO(w, w, short) -BUILDIO(l, , int) - -#endif /* _ASM_X86_IO_64_H */ -- cgit v1.2.3